diff options
Diffstat (limited to 'target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts')
| -rw-r--r-- | target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts b/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts new file mode 100644 index 0000000000..1bf175b7bf --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/dts-v1/; + +#include "rtl838x.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "netgear,gs110tpp-v1", "realtek,rtl838x-soc"; + model = "Netgear GS110TPP"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + mode { + label = "reset"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x0e0000>; + read-only; + }; + partition@e0000 { + label = "u-boot-env"; + reg = <0x00e0000 0x010000>; + }; + partition@f0000 { + label = "sysinfo"; + reg = <0x00f0000 0x010000>; + read-only; + }; + partition@100000{ + label = "jffs2_cfg"; + reg = <0x0100000 0x100000>; + read-only; + }; + partition@200000{ + label = "jffs2_log"; + reg = <0x0200000 0x100000>; + }; + partition@300000{ + label = "firmware"; + compatible = "netgear,uimage"; + reg = <0x0300000 0x1d00000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + /* Internal phy */ + phy8: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <8>; + }; + phy9: ethernet-phy@9 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <9>; + }; + phy10: ethernet-phy@10 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <10>; + }; + phy11: ethernet-phy@11 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <11>; + }; + phy12: ethernet-phy@12 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <12>; + }; + phy13: ethernet-phy@13 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <13>; + }; + phy14: ethernet-phy@14 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <14>; + }; + phy15: ethernet-phy@15 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <15>; + }; +/* phy10: ethernet-phy@10 { + compatible = "ethernet-phy-ieee802.3-c22"; + phy-is-integrated; + reg = <10>; + }; + phy11: ethernet-phy@11 { + compatible = "ethernet-phy-ieee802.3-c22"; + phy-is-integrated; + reg = <11>; + }; + phy12: ethernet-phy@12 { + compatible = "ethernet-phy-ieee802.3-c22"; + phy-is-integrated; + reg = <12>; + }; + phy13: ethernet-phy@13 { + compatible = "ethernet-phy-ieee802.3-c22"; + phy-is-integrated; + reg = <13>; + };*/ + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@8 { + reg = <8>; + label = "lan1"; + phy-handle = <&phy8>; + phy-mode = "internal"; + }; + port@9 { + reg = <9>; + label = "lan2"; + phy-handle = <&phy9>; + phy-mode = "internal"; + }; + port@10 { + reg = <10>; + label = "lan3"; + phy-handle = <&phy10>; + phy-mode = "internal"; + }; + port@11 { + reg = <11>; + label = "lan4"; + phy-handle = <&phy11>; + phy-mode = "internal"; + }; + port@12 { + reg = <12>; + label = "lan5"; + phy-handle = <&phy12>; + phy-mode = "internal"; + }; + port@13 { + reg = <13>; + label = "lan6"; + phy-handle = <&phy13>; + phy-mode = "internal"; + }; + port@14 { + reg = <14>; + label = "lan7"; + phy-handle = <&phy14>; + phy-mode = "internal"; + }; + port@15 { + reg = <15>; + label = "lan8"; + phy-handle = <&phy15>; + phy-mode = "internal"; + }; +/* port@10 { + reg = <10>; + label = "lan9"; + phy-mode = "internal"; + phy-handle = <&phy10>; + }; + port@11 { + reg = <11>; + label = "lan10"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@12 { + reg = <12>; + label = "lan11"; + phy-mode = "internal"; + phy-handle = <&phy12>; + }; + port@13 { + reg = <13>; + label = "lan12"; + phy-mode = "internal"; + phy-handle = <&phy13>; + };*/ + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; |