diff options
Diffstat (limited to 'target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts')
-rw-r--r-- | target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts | 422 |
1 files changed, 0 insertions, 422 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts b/target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts deleted file mode 100644 index b7300cfcbe..0000000000 --- a/target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts +++ /dev/null @@ -1,422 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl839x.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> - -/ { - compatible = "tplink,sg2452p-v4", "realtek,rtl8393-soc"; - model = "TP-Link SG2452P v4"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - label-mac-device = ðernet0; - }; - - chosen { - bootargs = "console=ttyS0,38400"; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - speed { - label = "speed"; - gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - }; - }; - - gpio_fan_sys { - compatible = "gpio-fan"; - alarm-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - - gpio_fan_psu_1 { - pinctrl-names = "default"; - pinctrl-0 = <&disable_jtag>; - compatible = "gpio-fan"; - - alarm-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; - /* the actual speeds (rpm) are unknown, just use dummy values */ - gpio-fan,speed-map = <1 0>, <2 1>; - #cooling-cells = <2>; - }; - - gpio_fan_psu_2 { - /* This fan runs in parallel to PSU1 fan, but has a separate - * alarm GPIO. This is not (yet) supported by the gpio-fan driver, - * so a separate instance is added - */ - compatible = "gpio-fan"; - alarm-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - leds { - pinctrl-names = "default"; - compatible = "gpio-leds"; - - led-0 { - label = "green:speed"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - }; - - led-1 { - label = "green:poe"; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - }; - - led_sys: led-2 { - label = "green:sys"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_STATUS; - }; - - led-3 { - label = "green:fan"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_STATUS; - }; - - led-4 { - label = "amber:fan"; - gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_AMBER>; - function = "fault-fan"; - }; - - led-5 { - label = "green:poe-max"; - gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = "alarm-poe"; - }; - }; - - i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - - /* LAN9 - LAN12 */ - tps23861@5 { - compatible = "ti,tps23861"; - reg = <0x05>; - }; - - /* LAN17 - LAN20 */ - tps23861@6 { - compatible = "ti,tps23861"; - reg = <0x06>; - }; - - /* LAN45 - LAN48 */ - tps23861@9 { - compatible = "ti,tps23861"; - reg = <0x09>; - }; - - /* LAN37 - LAN40 */ - tps23861@a { - compatible = "ti,tps23861"; - reg = <0x0a>; - }; - - /* LAN1 - LAN4 */ - tps23861@14 { - compatible = "ti,tps23861"; - reg = <0x14>; - }; - - /* LAN25 - LAN28 */ - tps23861@24 { - compatible = "ti,tps23861"; - reg = <0x24>; - }; - - /* LAN33 - LAN 36 */ - tps23861@25 { - compatible = "ti,tps23861"; - reg = <0x25>; - }; - - /* LAN41 - LAN44 */ - tps23861@26 { - compatible = "ti,tps23861"; - reg = <0x26>; - }; - - /* LAN13 - LAN16 */ - tps23861@29 { - compatible = "ti,tps23861"; - reg = <0x29>; - }; - - /* LAN29 - LAN32 */ - tps23861@2c { - compatible = "ti,tps23861"; - reg = <0x2c>; - }; - - /* LAN5 - LAN8 */ - tps23861@48 { - compatible = "ti,tps23861"; - reg = <0x48>; - }; - - /* LAN21 - LAN24 */ - tps23861@49 { - compatible = "ti,tps23861"; - reg = <0x49>; - }; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; - }; -}; - -&gpio0 { - poe-enable { - gpio-hog; - gpios = <23 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "poe-enable"; - }; -}; - -&spi0 { - status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0xe0000>; - read-only; - }; - partition@e0000 { - label = "u-boot-env"; - reg = <0xe0000 0x20000>; - }; - - /* We use the "sys", "usrimg1" and "usrimg2" partitions - * as firmware since the kernel needs to be in "sys", but the - * partition is too small to hold the "rootfs" as well. - * The original partition map contains: - * - * partition@100000 { - * label = "sys"; - * reg = <0x100000 0x600000>; - * }; - * partition@700000 { - * label = "usrimg1"; - * reg = <0x700000 0xa00000>; - * }; - * partition@1100000 { - * label = "usrimg2"; - * reg = <0x1100000 0xa00000>; - * }; - */ - - partition@100000 { - label = "firmware"; - reg = <0x100000 0x1a00000>; - }; - partition@1b00000 { - label = "usrappfs"; - reg = <0x1b00000 0x400000>; - }; - partition@1f00000 { - compatible = "nvmem-cells"; - label = "para"; - reg = <0x1f00000 0x100000>; - #address-cells = <1>; - #size-cells = <1>; - read-only; - - factory_macaddr: macaddr@fdff4 { - reg = <0xfdff4 0x6>; - }; - }; - }; - }; -}; - -ðernet0 { - nvmem-cells = <&factory_macaddr>; - nvmem-cell-names = "mac-address"; - - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - /* External phy RTL8218B #1 */ - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - /* External phy RTL8218B #2 */ - EXTERNAL_PHY(8) - EXTERNAL_PHY(9) - EXTERNAL_PHY(10) - EXTERNAL_PHY(11) - EXTERNAL_PHY(12) - EXTERNAL_PHY(13) - EXTERNAL_PHY(14) - EXTERNAL_PHY(15) - - /* External phy RTL8218B #3 */ - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - /* External phy RTL8218B #4 */ - EXTERNAL_PHY(24) - EXTERNAL_PHY(25) - EXTERNAL_PHY(26) - EXTERNAL_PHY(27) - EXTERNAL_PHY(28) - EXTERNAL_PHY(29) - EXTERNAL_PHY(30) - EXTERNAL_PHY(31) - - /* External phy RTL8218B #5 */ - EXTERNAL_PHY(32) - EXTERNAL_PHY(33) - EXTERNAL_PHY(34) - EXTERNAL_PHY(35) - EXTERNAL_PHY(36) - EXTERNAL_PHY(37) - EXTERNAL_PHY(38) - EXTERNAL_PHY(39) - - /* External phy RTL8218B #6 */ - EXTERNAL_PHY(40) - EXTERNAL_PHY(41) - EXTERNAL_PHY(42) - EXTERNAL_PHY(43) - EXTERNAL_PHY(44) - EXTERNAL_PHY(45) - EXTERNAL_PHY(46) - EXTERNAL_PHY(47) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 01, qsgmii) - SWITCH_PORT(1, 02, qsgmii) - SWITCH_PORT(2, 03, qsgmii) - SWITCH_PORT(3, 04, qsgmii) - SWITCH_PORT(4, 05, qsgmii) - SWITCH_PORT(5, 06, qsgmii) - SWITCH_PORT(6, 07, qsgmii) - SWITCH_PORT(7, 08, qsgmii) - - SWITCH_PORT(8, 09, qsgmii) - SWITCH_PORT(9, 10, qsgmii) - SWITCH_PORT(10, 11, qsgmii) - SWITCH_PORT(11, 12, qsgmii) - SWITCH_PORT(12, 13, qsgmii) - SWITCH_PORT(13, 14, qsgmii) - SWITCH_PORT(14, 15, qsgmii) - SWITCH_PORT(15, 16, qsgmii) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - SWITCH_PORT(24, 25, qsgmii) - SWITCH_PORT(25, 26, qsgmii) - SWITCH_PORT(26, 27, qsgmii) - SWITCH_PORT(27, 28, qsgmii) - SWITCH_PORT(28, 29, qsgmii) - SWITCH_PORT(29, 30, qsgmii) - SWITCH_PORT(30, 31, qsgmii) - SWITCH_PORT(31, 32, qsgmii) - - SWITCH_PORT(32, 33, qsgmii) - SWITCH_PORT(33, 34, qsgmii) - SWITCH_PORT(34, 35, qsgmii) - SWITCH_PORT(35, 36, qsgmii) - SWITCH_PORT(36, 37, qsgmii) - SWITCH_PORT(37, 38, qsgmii) - SWITCH_PORT(38, 39, qsgmii) - SWITCH_PORT(39, 40, qsgmii) - - SWITCH_PORT(40, 41, qsgmii) - SWITCH_PORT(41, 42, qsgmii) - SWITCH_PORT(42, 43, qsgmii) - SWITCH_PORT(43, 44, qsgmii) - SWITCH_PORT(44, 45, qsgmii) - SWITCH_PORT(45, 46, qsgmii) - SWITCH_PORT(46, 47, qsgmii) - SWITCH_PORT(47, 48, qsgmii) - - /* CPU-Port */ - port@52 { - ethernet = <ðernet0>; - reg = <52>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; |