1 files changed, 149 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/rt2880_buffalo_wzr-agl300nh.dts b/target/linux/ramips/dts/rt2880_buffalo_wzr-agl300nh.dts
new file mode 100644
index 0000000000..c6a90d426a
--- /dev/null
+++ b/target/linux/ramips/dts/rt2880_buffalo_wzr-agl300nh.dts
@@ -0,0 +1,149 @@
+/dts-v1/;
+
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "buffalo,wzr-agl300nh", "ralink,rt2880-soc";
+	model = "Buffalo WZR-AGL300NH";
+
+	aliases {
+		led-boot = &led_router;
+		led-failsafe = &led_router;
+		led-running = &led_router;
+		led-upgrade = &led_router;
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x800000>;
+		bank-width = <2>;
+		device-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "uboot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x3b0000>;
+			};
+		};
+	};
+
+	rtl8366s {
+		compatible = "realtek,rtl8366s";
+		gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		router {
+			label = "router_switch";
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+			linux,code = <BTN_0>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_router: router {
+			label = "wzr-agl300nh:green:router";
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		diag {
+			label = "wzr-agl300nh:red:diag";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		security_g {
+			label = "wzr-agl300nh:orange:security_g";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		security_n {
+			label = "wzr-agl300nh:orange:security_n";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "uartlite", "mdio";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	mtd-mac-address = <&factory 0x4>;
+
+	port@0 {
+		mediatek,fixed-link = <1000 1 1 1>;
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			phy-mode = "mii";
+			reg = <0>;
+		};
+	};
+};
+
+&pci {
+	status = "okay";
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};