1 files changed, 204 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-853-a3.dts b/target/linux/ramips/dts/mt7621_dlink_dir-853-a3.dts
new file mode 100644
index 0000000000..738bcdc7d6
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-853-a3.dts
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "dlink,dir-853-a3", "mediatek,mt7621-soc";
+	model = "D-Link DIR-853 A3";
+
+	aliases {
+		label-mac-device = &gmac0;
+		led-boot = &led_power_orange;
+		led-failsafe = &led_power_blue;
+		led-running = &led_power_blue;
+		led-upgrade = &led_net_orange;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_orange: power_orange {
+			label = "orange:power";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_blue: power_blue {
+			label = "blue:power";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led_net_orange: net_orange {
+			label = "orange:net";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		net_blue {
+			label = "blue:net";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+		usb_blue {
+			label = "blue:usb";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&xhci_ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0radio";
+		};
+
+		wlan5g {
+			label = "blue:wlan5g";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1radio";
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "config";
+			reg = <0x80000 0x80000>;
+			read-only;
+		};
+
+		factory: partition@100000 {
+			label = "factory";
+			reg = <0x100000 0x40000>;
+			read-only;
+		};
+
+		partition@140000 {
+			label = "config2";
+			reg = <0x140000 0x40000>;
+			read-only;
+		};
+
+		partition@180000 {
+			label = "firmware";
+			compatible = "openwrt,uimage", "denx,uimage";
+			openwrt,padding = <96>;
+			reg = <0x180000 0x2800000>;
+		};
+
+		partition@2980000 {
+			label = "private";
+			reg = <0x2980000 0x2000000>;
+			read-only;
+		};
+
+		partition@4980000 {
+			label = "firmware2";
+			reg = <0x4980000 0x2800000>;
+		};
+
+		partition@7180000 {
+			label = "mydlink";
+			reg = <0x7180000 0x600000>;
+			read-only;
+		};
+
+		partition@7780000 {
+			label = "reserved";
+			reg = <0x7780000 0x880000>;
+			read-only;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0>;
+		/* 5 GHz (phy1) does not take the address from calibration data,
+		   but setting it manually here works */
+		mtd-mac-address = <&factory 0x4>;
+	};
+};
+
+&gmac0 {
+	mtd-mac-address = <&factory 0xe000>;
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan4";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan3";
+		};
+
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port@3 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port@4 {
+			status = "okay";
+			label = "wan";
+			mtd-mac-address = <&factory 0xe006>;
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uart2", "uart3", "jtag", "wdt";
+		function = "gpio";
+	};
+};