diff options
Diffstat (limited to 'target/linux/qoriq/files/arch/powerpc/boot/dts/fsl/watchguard-firebox-m300.dts')
| -rw-r--r-- | target/linux/qoriq/files/arch/powerpc/boot/dts/fsl/watchguard-firebox-m300.dts | 328 |
1 files changed, 328 insertions, 0 deletions
diff --git a/target/linux/qoriq/files/arch/powerpc/boot/dts/fsl/watchguard-firebox-m300.dts b/target/linux/qoriq/files/arch/powerpc/boot/dts/fsl/watchguard-firebox-m300.dts new file mode 100644 index 0000000000..54f7e06bc5 --- /dev/null +++ b/target/linux/qoriq/files/arch/powerpc/boot/dts/fsl/watchguard-firebox-m300.dts @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later +/* + * WatchGuard Firebox M300 Device Tree Source + * Based on t2081qds.dts from Linux 5.10 + * + * Copyright 2013 - 2015 Freescale Semiconductor Inc. + * Copyright 2020 - 2021 Stijn Tintel <stijn@linux-ipv6.be> + */ + +/include/ "t208xsi-pre.dtsi" +/include/ "t208xqds.dtsi" + +/ { + model = "WatchGuard Firebox M300"; + compatible = "watchguard,firebox-m300", "fsl,T2081QDS"; + + interrupt-parent = <&mpic>; + + aliases { + /delete-property/ ethernet0; + /delete-property/ ethernet1; + /delete-property/ ethernet2; + /delete-property/ ethernet3; + /delete-property/ ethernet4; + /delete-property/ ethernet5; + /delete-property/ ethernet6; + /delete-property/ ethernet7; + + ethernet0 = &enet7; + ethernet1 = &enet0; + ethernet2 = &enet1; + ethernet3 = &enet2; + ethernet4 = &enet3; + }; +}; + +&soc { +// Include first to make this the first interface +/include/ "qoriq-fman3-0-10g-1.dtsi" +}; + +// mdio-mux under &boardctrl + its aliases removed. causes crash: +// Oops: Machine check, sig: 7 [#1] + +/include/ "t2081si-post.dtsi" + +// add stuff below the include to make sure we override whatever is there + +&enet0 { + phy-connection-type = "sgmii"; + phy-handle = <&phy1>; +}; + +&enet1 { + phy-connection-type = "sgmii"; + phy-handle = <&phy2>; +}; + +&enet2 { + phy-connection-type = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&enet3 { + phy-connection-type = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&enet4 { + status = "disabled"; +}; + +&enet5 { + status = "disabled"; +}; + +&enet6 { + status = "disabled"; +}; + +&enet7 { + phy-connection-type = "sgmii"; + phy-handle = <&phy0>; +}; + +&ifc { + ranges = <0x00 0x00 0x0f 0xefc00000 0x400000>; + + nor@0,0 { + reg = <0x00 0x00 0x400000>; + + partition@0{ + reg = <0x0 0x10000>; + label = "qoriq-rcw"; + read-only; + }; + + partition@10000 { + reg = <0x10000 0x20000>; + label = "wg_cfg0"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "wg_cfg1"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x10000>; + label = "wg_mfg_data"; + read-only; + }; + + partition@50000 { + reg = <0x50000 0xb0000>; + label = "wg_bootopt_data_and_reserved"; + read-only; + }; + + partition@100000 { + reg = <0x100000 0xb0000>; + label = "wg_extra_reserved_1"; + read-only; + }; + + partition@1B0000 { + reg = <0x1b0000 0xb0000>; + label = "wg_extra_reserved_2"; + read-only; + }; + + partition@260000 { + reg = <0x260000 0xc0000>; + label = "wg_u-boot_failsafe"; + read-only; + }; + + partition@320000 { + reg = <0x320000 0x10000>; + label = "qoriq-fman"; + read-only; + }; + + partition@330000 { + reg = <0x330000 0x10000>; + label = "u-boot-env"; + }; + + partition@340000 { + reg = <0x340000 0xc0000>; + label = "u-boot"; + read-only; + }; + }; + + nand@2,0 { + status = "disabled"; + }; +}; + +&mdio0 { + // m300 ethernet port 0 + phy0: ethernet-phy@0 { + reg = <0x00>; + }; + + // m300 ethernet port 1 + phy1: ethernet-phy@1 { + reg = <0x01>; + }; + + phy2: ethernet-phy@2 { + reg = <0x02>; + }; + + phy3: ethernet-phy@3 { + reg = <0x03>; + }; + + switch0: switch@10 { + compatible = "marvell,mv88e6085"; + reg = <0x10>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@0 { + reg = <0x00>; + interrupt-parent = <&switch0>; + }; + + switch0phy1: switch0phy1@1 { + reg = <0x01>; + interrupt-parent = <&switch0>; + }; + + switch0phy2: switch0phy2@2 { + reg = <0x02>; + interrupt-parent = <&switch0>; + }; + + switch0phy3: switch0phy3@3 { + reg = <0x03>; + interrupt-parent = <&switch0>; + }; + + switch0phy4: switch0phy4@4 { + reg = <0x04>; + interrupt-parent = <&switch0>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "sweth3"; + phy-handle = <&switch0phy0>; + }; + + port@1 { + reg = <1>; + label = "sweth4"; + phy-handle = <&switch0phy1>; + }; + + port@2 { + reg = <2>; + label = "sweth5"; + phy-handle = <&switch0phy2>; + }; + + port@3 { + reg = <3>; + label = "sweth6"; + phy-handle = <&switch0phy3>; + }; + + port@4 { + reg = <4>; + label = "sweth7"; + phy-handle = <&switch0phy4>; + }; + + // OEM bootlog suggests multiple ports are attached to switch + // Keep this until OEM supplies GPL sources + port@5 { + status = "disabled"; + + reg = "<5>"; + label = "cpu"; + ethernet = <&enet2>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&enet3>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&soc { + i2c@118000 { + tpm@29 { + compatible = "tpm,tpm_i2c_atmel"; + reg = <0x29>; + }; + hwmon@2c { + compatible = "winbond,w83793"; + reg = <0x2c>; + }; + hwmon@2d { + compatible = "winbond,w83793"; + reg = <0x2d>; + }; + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + pca9547@77 { + status = "disabled"; + }; + }; + + spi@110000 { + // DTS decompiled from OEM DTB contains flash@0 but doesn't work + // spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff + // disable for now + flash@0 { + status = "disabled"; + }; + + flash@1 { + status = "disabled"; + }; + + flash@2 { + status = "disabled"; + }; + }; +}; |