aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/pxa/patches
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/pxa/patches')
-rw-r--r--target/linux/pxa/patches/000-cpufreq.patch533
-rw-r--r--target/linux/pxa/patches/001-pm.patch869
-rw-r--r--target/linux/pxa/patches/002-usb_gadget.patch58
-rw-r--r--target/linux/pxa/patches/004-skbuf_hack.patch10
-rw-r--r--target/linux/pxa/patches/005-mtd.patch111
5 files changed, 1581 insertions, 0 deletions
diff --git a/target/linux/pxa/patches/000-cpufreq.patch b/target/linux/pxa/patches/000-cpufreq.patch
new file mode 100644
index 0000000000..3cb6676b41
--- /dev/null
+++ b/target/linux/pxa/patches/000-cpufreq.patch
@@ -0,0 +1,533 @@
+diff -Nurbw linux-2.6.17/arch/arm/Kconfig linux-2.6.17-patched/arch/arm/Kconfig
+--- linux-2.6.17/arch/arm/Kconfig 2006-06-17 18:49:35.000000000 -0700
++++ linux-2.6.17-patched/arch/arm/Kconfig 2006-09-21 14:57:02.000000000 -0700
+@@ -656,7 +656,7 @@
+
+ endmenu
+
+-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
++if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1 || ARCH_PXA)
+
+ menu "CPU Frequency scaling"
+
+@@ -685,6 +685,13 @@
+
+ endmenu
+
++config CPU_FREQ_PXA
++ bool
++ depends on CPU_FREQ && ARCH_PXA
++ default y
++ select CPU_FREQ_DEFAULT_GOV_USERSPACE
++ select CPU_FREQ_TABLE
++
+ endif
+
+ menu "Floating point emulation"
+diff -Nurbw linux-2.6.17/arch/arm/mach-pxa/cpu-pxa.c linux-2.6.17-patched/arch/arm/mach-pxa/cpu-pxa.c
+--- linux-2.6.17/arch/arm/mach-pxa/cpu-pxa.c 1969-12-31 16:00:00.000000000 -0800
++++ linux-2.6.17-patched/arch/arm/mach-pxa/cpu-pxa.c 2006-09-21 14:57:02.000000000 -0700
+@@ -0,0 +1,324 @@
++/*
++ * linux/arch/arm/mach-pxa/cpu-pxa.c
++ *
++ * Copyright (C) 2002,2003 Intrinsyc Software
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * History:
++ * 31-Jul-2002 : Initial version [FB]
++ * 29-Jan-2003 : added PXA255 support [FB]
++ * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
++ *
++ * Note:
++ * This driver may change the memory bus clock rate, but will not do any
++ * platform specific access timing changes... for example if you have flash
++ * memory connected to CS0, you will need to register a platform specific
++ * notifier which will adjust the memory access strobes to maintain a
++ * minimum strobe width.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/init.h>
++#include <linux/cpufreq.h>
++
++#include <asm/hardware.h>
++#include <asm/arch/pxa-regs.h>
++
++#undef DEBUG
++
++#ifdef DEBUG
++ static unsigned int freq_debug = DEBUG;
++ module_param(freq_debug, int, 0);
++ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
++#else
++ #define freq_debug 0
++#endif
++
++typedef struct
++{
++ unsigned int khz;
++ unsigned int membus;
++ unsigned int cccr;
++ unsigned int div2;
++} pxa_freqs_t;
++
++/* Define the refresh period in mSec for the SDRAM and the number of rows */
++#define SDRAM_TREF 64 /* standard 64ms SDRAM */
++#define SDRAM_ROWS 2048 /* 64MB=8192 32MB=4096 */
++#define MDREFR_DRI(x) ((x*SDRAM_TREF)/(SDRAM_ROWS*32))
++
++#define CCLKCFG_TURBO 0x1
++#define CCLKCFG_FCS 0x2
++#define PXA25x_MIN_FREQ 99533
++#define PXA25x_MAX_FREQ 530842
++#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
++#define MDREFR_DRI_MASK 0xFFF
++
++
++/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
++static pxa_freqs_t pxa255_run_freqs[] =
++{
++ /* CPU MEMBUS CCCR DIV2*/
++ { 99533, 99533, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50, SDRAM=50 */
++ {132710, 132710, 0x123, 1}, /* run=133, turbo=133, PXbus=66, SDRAM=66 */
++ {199066, 99533, 0x141, 0}, /* run=199, turbo=199, PXbus=99, SDRAM=99 */
++ {265421, 132710, 0x143, 0}, /* run=265, turbo=265, PXbus=133, SDRAM=133 */
++ {331776, 165888, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */
++ {398131, 99533, 0x161, 0}, /* run=398, turbo=398, PXbus=99, SDRAM=99 */
++ {398131, 132710, 0x1c3, 0}, /* run=265, turbo=398, PXbus=133, SDRAM=133 */
++ {530842, 132710, 0x163, 0}, /* run=531, turbo=531, PXbus=133, SDRAM=133 */
++ {0,}
++};
++#define NUM_RUN_FREQS (sizeof(pxa255_run_freqs)/sizeof(pxa_freqs_t))
++
++static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1];
++
++/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
++static pxa_freqs_t pxa255_turbo_freqs[] =
++{
++ /* CPU MEMBUS CCCR DIV2*/
++ { 99533, 99533, 0x121, 1}, /* run=99, turbo= 99, PXbus=99, SDRAM=50 */
++ {149299, 99533, 0x1a1, 0}, /* run=99, turbo=149, PXbus=99, SDRAM=99 */
++ {199066, 99533, 0x221, 0}, /* run=99, turbo=199, PXbus=99, SDRAM=99 */
++ {298598, 99533, 0x321, 0}, /* run=99, turbo=299, PXbus=99, SDRAM=99 */
++ {398131, 99533, 0x241, 1}, /* run=199, turbo=398, PXbus=99, SDRAM=50 */
++ {0,}
++};
++#define NUM_TURBO_FREQS (sizeof(pxa255_turbo_freqs)/sizeof(pxa_freqs_t))
++
++static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1];
++
++extern unsigned get_clk_frequency_khz(int info);
++
++/* find a valid frequency point */
++static int pxa_verify_policy(struct cpufreq_policy *policy)
++{
++ int ret;
++ struct cpufreq_frequency_table *pxa_freqs_table;
++
++ if(policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
++ pxa_freqs_table = pxa255_run_freq_table;
++ } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
++ pxa_freqs_table = pxa255_turbo_freq_table;
++ } else {
++ printk("CPU PXA: Unknown policy found. "
++ "Using CPUFREQ_POLICY_PERFORMANCE\n");
++ pxa_freqs_table = pxa255_run_freq_table;
++ }
++ ret=cpufreq_frequency_table_verify(policy, pxa_freqs_table);
++
++ if(freq_debug) {
++ printk("Verified CPU policy: %dKhz min to %dKhz max\n",
++ policy->min, policy->max);
++ }
++
++ return ret;
++}
++
++static int pxa_set_target(struct cpufreq_policy *policy,
++ unsigned int target_freq,
++ unsigned int relation)
++{
++ int idx;
++ cpumask_t cpus_allowed;
++ int cpu = policy->cpu;
++ struct cpufreq_freqs freqs;
++ pxa_freqs_t *pxa_freq_settings;
++ struct cpufreq_frequency_table *pxa_freqs_table;
++ unsigned long flags;
++ unsigned int unused;
++ unsigned int preset_mdrefr, postset_mdrefr;
++ void *ramstart;
++
++ /*
++ * Save this threads cpus_allowed mask.
++ */
++ cpus_allowed = current->cpus_allowed;
++
++ /*
++ * Bind to the specified CPU. When this call returns,
++ * we should be running on the right CPU.
++ */
++ set_cpus_allowed(current, cpumask_of_cpu(cpu));
++ BUG_ON(cpu != smp_processor_id());
++
++ /* Get the current policy */
++ if(policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
++ pxa_freq_settings = pxa255_run_freqs;
++ pxa_freqs_table = pxa255_run_freq_table;
++ }else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
++ pxa_freq_settings = pxa255_turbo_freqs;
++ pxa_freqs_table = pxa255_turbo_freq_table;
++ }else {
++ printk("CPU PXA: Unknown policy found. "
++ "Using CPUFREQ_POLICY_PERFORMANCE\n");
++ pxa_freq_settings = pxa255_run_freqs;
++ pxa_freqs_table = pxa255_run_freq_table;
++ }
++
++ /* Lookup the next frequency */
++ if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
++ target_freq, relation, &idx)) {
++ return -EINVAL;
++ }
++
++ freqs.old = policy->cur;
++ freqs.new = pxa_freq_settings[idx].khz;
++ freqs.cpu = policy->cpu;
++ if(freq_debug) {
++ printk(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
++ freqs.new/1000, (pxa_freq_settings[idx].div2) ?
++ (pxa_freq_settings[idx].membus/2000) :
++ (pxa_freq_settings[idx].membus/1000));
++ }
++
++ ramstart = phys_to_virt(0xa0000000);
++
++ /*
++ * Tell everyone what we're about to do...
++ * you should add a notify client with any platform specific
++ * Vcc changing capability
++ */
++ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
++
++ /* Calculate the next MDREFR. If we're slowing down the SDRAM clock
++ * we need to preset the smaller DRI before the change. If we're speeding
++ * up we need to set the larger DRI value after the change.
++ */
++ preset_mdrefr = postset_mdrefr = MDREFR;
++ if((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) {
++ preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) |
++ MDREFR_DRI(pxa_freq_settings[idx].membus);
++ }
++ postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) |
++ MDREFR_DRI(pxa_freq_settings[idx].membus);
++
++ /* If we're dividing the memory clock by two for the SDRAM clock, this
++ * must be set prior to the change. Clearing the divide must be done
++ * after the change.
++ */
++ if(pxa_freq_settings[idx].div2) {
++ preset_mdrefr |= MDREFR_DB2_MASK;
++ postset_mdrefr |= MDREFR_DB2_MASK;
++ } else {
++ postset_mdrefr &= ~MDREFR_DB2_MASK;
++ }
++
++ local_irq_save(flags);
++
++ /* Set new the CCCR */
++ CCCR = pxa_freq_settings[idx].cccr;
++
++ __asm__ __volatile__(" \
++ ldr r4, [%1] ; /* load MDREFR */ \
++ b 2f ; \
++ .align 5 ; \
++1: \
++ str %4, [%1] ; /* preset the MDREFR */ \
++ mcr p14, 0, %2, c6, c0, 0 ; /* set CCLKCFG[FCS] */ \
++ str %5, [%1] ; /* postset the MDREFR */ \
++ \
++ b 3f ; \
++2: b 1b ; \
++3: nop ; \
++ "
++ : "=&r" (unused)
++ : "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart), \
++ "r" (preset_mdrefr), "r" (postset_mdrefr)
++ : "r4", "r5");
++ local_irq_restore(flags);
++
++ /*
++ * Restore the CPUs allowed mask.
++ */
++ set_cpus_allowed(current, cpus_allowed);
++
++ /*
++ * Tell everyone what we've just done...
++ * you should add a notify client with any platform specific
++ * SDRAM refresh timer adjustments
++ */
++ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
++
++ return 0;
++}
++
++static int pxa_cpufreq_init(struct cpufreq_policy *policy)
++{
++ cpumask_t cpus_allowed;
++ unsigned int cpu = policy->cpu;
++ int i;
++
++ cpus_allowed = current->cpus_allowed;
++
++ set_cpus_allowed(current, cpumask_of_cpu(cpu));
++ BUG_ON(cpu != smp_processor_id());
++
++ /* set default policy and cpuinfo */
++ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
++ policy->policy = CPUFREQ_POLICY_PERFORMANCE;
++ policy->cpuinfo.max_freq = PXA25x_MAX_FREQ;
++ policy->cpuinfo.min_freq = PXA25x_MIN_FREQ;
++ policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
++ policy->cur = get_clk_frequency_khz(0); /* current freq */
++ policy->min = policy->max = policy->cur;
++
++ /* Generate the run cpufreq_frequency_table struct */
++ for(i=0;i<NUM_RUN_FREQS;i++) {
++ pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
++ pxa255_run_freq_table[i].index = i;
++ }
++ pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
++ /* Generate the turbo cpufreq_frequency_table struct */
++ for(i=0;i<NUM_TURBO_FREQS;i++) {
++ pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz;
++ pxa255_turbo_freq_table[i].index = i;
++ }
++ pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
++
++ set_cpus_allowed(current, cpus_allowed);
++ printk(KERN_INFO "PXA CPU frequency change support initialized\n");
++
++ return 0;
++}
++
++static struct cpufreq_driver pxa_cpufreq_driver = {
++ .verify = pxa_verify_policy,
++ .target = pxa_set_target,
++ .init = pxa_cpufreq_init,
++ .name = "PXA25x",
++};
++
++static int __init pxa_cpu_init(void)
++{
++ return cpufreq_register_driver(&pxa_cpufreq_driver);
++}
++
++static void __exit pxa_cpu_exit(void)
++{
++ cpufreq_unregister_driver(&pxa_cpufreq_driver);
++}
++
++
++MODULE_AUTHOR ("Intrinsyc Software Inc.");
++MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture");
++MODULE_LICENSE("GPL");
++module_init(pxa_cpu_init);
++module_exit(pxa_cpu_exit);
++
+diff -Nurbw linux-2.6.17/arch/arm/mach-pxa/Makefile linux-2.6.17-patched/arch/arm/mach-pxa/Makefile
+--- linux-2.6.17/arch/arm/mach-pxa/Makefile 2006-09-21 15:11:33.000000000 -0700
++++ linux-2.6.17-patched/arch/arm/mach-pxa/Makefile 2006-09-21 14:57:02.000000000 -0700
+@@ -30,5 +30,6 @@
+ obj-$(CONFIG_PM) += pm.o sleep.o
+ obj-$(CONFIG_PXA_SSP) += ssp.o
++obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
+
+ ifeq ($(CONFIG_PXA27x),y)
+ obj-$(CONFIG_PM) += standby.o
+diff -Nurbw linux-2.6.17/Documentation/cpu-freq/user-guide.txt linux-2.6.17-patched/Documentation/cpu-freq/user-guide.txt
+--- linux-2.6.17/Documentation/cpu-freq/user-guide.txt 2006-06-17 18:49:35.000000000 -0700
++++ linux-2.6.17-patched/Documentation/cpu-freq/user-guide.txt 2006-09-21 14:57:02.000000000 -0700
+@@ -18,7 +18,7 @@
+ Contents:
+ ---------
+ 1. Supported Architectures and Processors
+-1.1 ARM
++1.1 ARM, PXA
+ 1.2 x86
+ 1.3 sparc64
+ 1.4 ppc
+@@ -37,14 +37,15 @@
+ 1. Supported Architectures and Processors
+ =========================================
+
+-1.1 ARM
+--------
++1.1 ARM, PXA
++------------
+
+ The following ARM processors are supported by cpufreq:
+
+ ARM Integrator
+ ARM-SA1100
+ ARM-SA1110
++Intel PXA
+
+
+ 1.2 x86
+diff -Nurbw linux-2.6.17/drivers/cpufreq/Kconfig linux-2.6.17-patched/drivers/cpufreq/Kconfig
+--- linux-2.6.17/drivers/cpufreq/Kconfig 2006-06-17 18:49:35.000000000 -0700
++++ linux-2.6.17-patched/drivers/cpufreq/Kconfig 2006-09-21 15:06:12.000000000 -0700
+@@ -46,13 +46,9 @@
+ This will show detail CPU frequency translation table in sysfs file
+ system
+
+-# Note that it is not currently possible to set the other governors (such as ondemand)
+-# as the default, since if they fail to initialise, cpufreq will be
+-# left in an undefined state.
+-
+ choice
+ prompt "Default CPUFreq governor"
+- default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110
++ default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110 || CPU_FREQ_PXA
+ default CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+ help
+ This option sets which CPUFreq governor shall be loaded at
+@@ -66,6 +62,14 @@
+ the frequency statically to the highest frequency supported by
+ the CPU.
+
++config CPU_FREQ_DEFAULT_GOV_POWERSAVE
++ bool "powersave"
++ select CPU_FREQ_GOV_POWERSAVE
++ help
++ Use the CPUFreq governor 'powersave' as default. This sets
++ the frequency statically to the lowest frequency supported by
++ the CPU.
++
+ config CPU_FREQ_DEFAULT_GOV_USERSPACE
+ bool "userspace"
+ select CPU_FREQ_GOV_USERSPACE
+@@ -75,6 +79,23 @@
+ program shall be able to set the CPU dynamically without having
+ to enable the userspace governor manually.
+
++config CPU_FREQ_DEFAULT_GOV_ONDEMAND
++ bool "ondemand"
++ select CPU_FREQ_GOV_ONDEMAND
++ help
++ Use the CPUFreq governor 'ondemand' as default. This sets
++ the frequency dynamically based on CPU load, throttling up
++ and down as necessary.
++
++config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
++ bool "conservative"
++ select CPU_FREQ_GOV_CONSERVATIVE
++ help
++ Use the CPUFreq governor 'conservative' as default. This sets
++ the frequency dynamically based on CPU load, throttling up
++ and down as necessary. The frequency is gracefully increased
++ and decreased rather than jumping to 100% when speed is required.
++
+ endchoice
+
+ config CPU_FREQ_GOV_PERFORMANCE
+diff -Nurbw linux-2.6.17/include/linux/cpufreq.h linux-2.6.17-patched/include/linux/cpufreq.h
+--- linux-2.6.17/include/linux/cpufreq.h 2006-06-17 18:49:35.000000000 -0700
++++ linux-2.6.17-patched/include/linux/cpufreq.h 2006-09-21 15:08:35.000000000 -0700
+@@ -276,9 +276,18 @@
+ #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+ extern struct cpufreq_governor cpufreq_gov_performance;
+ #define CPUFREQ_DEFAULT_GOVERNOR &cpufreq_gov_performance
++#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE)
++extern struct cpufreq_governor cpufreq_gov_powersave;
++#define CPUFREQ_DEFAULT_GOVERNOR &cpufreq_gov_powersave
+ #elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE)
+ extern struct cpufreq_governor cpufreq_gov_userspace;
+ #define CPUFREQ_DEFAULT_GOVERNOR &cpufreq_gov_userspace
++#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND)
++extern struct cpufreq_governor cpufreq_gov_ondemand;
++#define CPUFREQ_DEFAULT_GOVERNOR &cpufreq_gov_ondemand;
++#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE)
++extern struct cpufreq_governor cpufreq_gov_conservative;
++#define CPUFREQ_DEFAULT_GOVERNOR &cpufreq_gov_conservative;
+ #endif
+
+
+diff -Nubrw --exclude='.*.o.cmd' linux-2.6.17/drivers/cpufreq/cpufreq_conservative.c linux-2.6.17-patched/drivers/cpufreq/cpufreq_conservative.c
+--- linux-2.6.17/drivers/cpufreq/cpufreq_conservative.c 2006-09-21 15:26:46.000000000 -0700
++++ linux-2.6.17-patched/drivers/cpufreq/cpufreq_conservative.c 2006-06-17 18:49:35.000000000 -0700
+@@ -529,7 +529,7 @@
+ return 0;
+ }
+
+-static struct cpufreq_governor cpufreq_gov_dbs = {
++struct cpufreq_governor cpufreq_gov_conservative = {
+ .name = "conservative",
+ .governor = cpufreq_governor_dbs,
+ .owner = THIS_MODULE,
+@@ -537,7 +537,7 @@
+
+ static int __init cpufreq_gov_dbs_init(void)
+ {
+- return cpufreq_register_governor(&cpufreq_gov_dbs);
++ return cpufreq_register_governor(&cpufreq_gov_conservative);
+ }
+
+ static void __exit cpufreq_gov_dbs_exit(void)
+@@ -545,7 +545,7 @@
+ /* Make sure that the scheduled work is indeed not running */
+ flush_scheduled_work();
+
+- cpufreq_unregister_governor(&cpufreq_gov_dbs);
++ cpufreq_unregister_governor(&cpufreq_gov_conservative);
+ }
+
+
+diff -Nubrw --exclude='.*.o.cmd' linux-2.6.17/drivers/cpufreq/cpufreq_ondemand.c linux-2.6.17-patched/drivers/cpufreq/cpufreq_ondemand.c
+--- linux-2.6.17/drivers/cpufreq/cpufreq_ondemand.c 2006-06-17 18:49:35.000000000 -0700
++++ linux-2.6.17-patched/drivers/cpufreq/cpufreq_ondemand.c 2006-09-27 14:00:15.000000000 -0700
+@@ -484,7 +484,7 @@
+ return 0;
+ }
+
+-static struct cpufreq_governor cpufreq_gov_dbs = {
++struct cpufreq_governor cpufreq_gov_ondemand = {
+ .name = "ondemand",
+ .governor = cpufreq_governor_dbs,
+ .owner = THIS_MODULE,
+@@ -492,7 +492,7 @@
+
+ static int __init cpufreq_gov_dbs_init(void)
+ {
+- return cpufreq_register_governor(&cpufreq_gov_dbs);
++ return cpufreq_register_governor(&cpufreq_gov_ondemand);
+ }
+
+ static void __exit cpufreq_gov_dbs_exit(void)
+@@ -504,7 +504,7 @@
+ destroy_workqueue(dbs_workq);
+ }
+
+- cpufreq_unregister_governor(&cpufreq_gov_dbs);
++ cpufreq_unregister_governor(&cpufreq_gov_ondemand);
+ }
+
+
diff --git a/target/linux/pxa/patches/001-pm.patch b/target/linux/pxa/patches/001-pm.patch
new file mode 100644
index 0000000000..799b9bd536
--- /dev/null
+++ b/target/linux/pxa/patches/001-pm.patch
@@ -0,0 +1,869 @@
+diff -NurbwB linux-2.6.17/arch/arm/mach-pxa/pm.c linux-2.6.17-patched/arch/arm/mach-pxa/pm.c
+--- linux-2.6.17/arch/arm/mach-pxa/pm.c 2006-06-17 18:49:35.000000000 -0700
++++ linux-2.6.17-patched/arch/arm/mach-pxa/pm.c 2006-09-11 10:58:41.000000000 -0700
+@@ -10,35 +10,50 @@
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
++
+ #include <linux/config.h>
+ #include <linux/init.h>
+-#include <linux/module.h>
+-#include <linux/suspend.h>
++#include <linux/pm.h>
++#include <linux/slab.h>
++#include <linux/sched.h>
++#include <linux/interrupt.h>
++#include <linux/sysctl.h>
+ #include <linux/errno.h>
+-#include <linux/time.h>
+
+ #include <asm/hardware.h>
+ #include <asm/memory.h>
+ #include <asm/system.h>
+-#include <asm/arch/pm.h>
++#include <asm/leds.h>
++#include <asm/uaccess.h>
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/arch/lubbock.h>
+ #include <asm/mach/time.h>
+
++/**/
++#include <linux/module.h>
++/**/
++//kirti
++#include <linux/delay.h>
++//kirti~
+
+ /*
+ * Debug macros
+ */
+-#undef DEBUG
++#define DEBUG
++
++extern void pxa_cpu_suspend(void);
++extern void pxa_cpu_resume(void);
++
++int pm_pwronoff;
++/*Angelia Additions */
++int pm_pedr=0;
++EXPORT_SYMBOL(pm_pwronoff);
++EXPORT_SYMBOL(pm_pedr);
++
+
+ #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
+ #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
+
+-#define RESTORE_GPLEVEL(n) do { \
+- GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \
+- GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \
+-} while (0)
+-
+ /*
+ * List of global PXA peripheral registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+@@ -46,97 +61,405 @@
+ */
+ enum { SLEEP_SAVE_START = 0,
+
+- SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3,
+- SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3,
+- SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3,
+- SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3,
+- SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
+-
+- SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
+- SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
+- SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
+- SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,
++ SLEEP_SAVE_OSCR, SLEEP_SAVE_OIER,
++ SLEEP_SAVE_OSMR0, SLEEP_SAVE_OSMR1, SLEEP_SAVE_OSMR2, SLEEP_SAVE_OSMR3,
+
+- SLEEP_SAVE_PSTR,
++ SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2,
++ SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2,
++ SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2,
++ SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR2_L,
++ SLEEP_SAVE_GAFR0_U, SLEEP_SAVE_GAFR1_U, SLEEP_SAVE_GAFR2_U,
++
++ SLEEP_SAVE_FFIER, SLEEP_SAVE_FFLCR, SLEEP_SAVE_FFMCR,
++ SLEEP_SAVE_FFSPR, SLEEP_SAVE_FFISR,
++ SLEEP_SAVE_FFDLL, SLEEP_SAVE_FFDLH,SLEEP_SAVE_FFFCR,
++
++ SLEEP_SAVE_STIER, SLEEP_SAVE_STLCR, SLEEP_SAVE_STMCR,
++ SLEEP_SAVE_STSPR, SLEEP_SAVE_STISR,
++ SLEEP_SAVE_STDLL, SLEEP_SAVE_STDLH,
++
++ SLEEP_SAVE_BTIER, SLEEP_SAVE_BTLCR, SLEEP_SAVE_BTMCR,
++ SLEEP_SAVE_BTSPR, SLEEP_SAVE_BTISR,
++ SLEEP_SAVE_BTDLL, SLEEP_SAVE_BTDLH,
+
+ SLEEP_SAVE_ICMR,
+ SLEEP_SAVE_CKEN,
+
+-#ifdef CONFIG_PXA27x
+- SLEEP_SAVE_MDREFR,
+- SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
+- SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
+-#endif
++ SLEEP_SAVE_LCCR0, SLEEP_SAVE_LCCR1, SLEEP_SAVE_LCCR2,SLEEP_SAVE_LCCR3,
++ SLEEP_SAVE_TMEDCR, SLEEP_SAVE_FDADR0, SLEEP_SAVE_FSADR0,SLEEP_SAVE_FIDR0,SLEEP_SAVE_FDADR1,
++ SLEEP_SAVE_LDCMD0,
++
++ SLEEP_SAVE_NSSCR0,SLEEP_SAVE_NSSCR1,SLEEP_SAVE_NSSSR,SLEEP_SAVE_NSSITR,SLEEP_SAVE_NSSDR,
++ SLEEP_SAVE_NSSTO,SLEEP_SAVE_NSSPSP,
+
+- SLEEP_SAVE_CKSUM,
+
++ SLEEP_SAVE_CKSUM,
+ SLEEP_SAVE_SIZE
+ };
+
++/**/
++#define UART_DTR 1
++#define UART_RTS 2
++
++/**/
+
+-int pxa_pm_enter(suspend_state_t state)
++int pm_do_suspend(void)
+ {
+ unsigned long sleep_save[SLEEP_SAVE_SIZE];
+ unsigned long checksum = 0;
+- struct timespec delta, rtc;
+ int i;
++ int valbefore,valafter,valafter1;
++ int gpsr0,gpsr1,gpsr2;
+ extern void pxa_cpu_pm_enter(suspend_state_t state);
+
+-#ifdef CONFIG_IWMMXT
+- /* force any iWMMXt context to ram **/
+- iwmmxt_task_disable(NULL);
+-#endif
++ // YoKu 16Feb06 GPIO Changed ----->
++
++ PGSR2 |= GPIO_bit(78);
++/* if(GPLR2 & GPIO_bit(78)) // LCD Reset Pin
++ PGSR2 |= GPIO_bit(78);
++ else
++ PGSR2 &= ~GPIO_bit(78); */
++ GPDR0 &= ~GPIO_bit(0);
++ GPDR0 &= ~GPIO_bit(1);
++ GPDR0 &= ~GPIO_bit(3); //Tushar: 20 apr GPIO3 configured as input
++ GPDR0 &= ~GPIO_bit(2);
++// GPDR0 &= ~GPIO_bit(5);
++// GPDR0 &= ~GPIO_bit(6);
++// GPDR0 &= ~GPIO_bit(7);
++// GPDR0 &= ~GPIO_bit(8);
++
++
++// KeyCol pin Status in sleep mode
++ PGSR0 &= ~GPIO_bit(9); //19
++ PGSR0 &= ~GPIO_bit(10); //20
++ PGSR0 &= ~GPIO_bit(11); //21
++ PGSR0 &= ~GPIO_bit(12); //22
++ PGSR0 &= ~GPIO_bit(13); //23
++ PGSR0 &= ~GPIO_bit(14); //24
++
++ printk("KER_PM: Setting up wakeup sources 26May06\n");
++
++ // KeyPad
++ //printk("KER_PM: Uncommented key pad wakeup sources\n");
++ PWER |= GPIO_bit(5); //11
++ PWER |= GPIO_bit(6); //12
++ PWER |= GPIO_bit(7); //13
++ PWER |= GPIO_bit(8); //14
++ PFER |= GPIO_bit(5); //11
++ PFER |= GPIO_bit(6); //12
++ PFER |= GPIO_bit(7); //13
++ PFER |= GPIO_bit(8); //14
++ PRER |= GPIO_bit(5); //11
++ PRER |= GPIO_bit(6); //12
++ PRER |= GPIO_bit(7); //13
++ PRER |= GPIO_bit(8); //14
++
++ // USB
++ PWER |= GPIO_bit(3); //6
++ PFER |= GPIO_bit(3); //6
++ PRER |= GPIO_bit(3); //6
++
++ // PMU
++ PWER |= GPIO_bit(2); //4
++ PFER |= GPIO_bit(2); //4
++ PRER |= GPIO_bit(2); //4
++
++ // Anup : GSM RI
++ PWER |= GPIO_bit(0); //0
++ PFER |= GPIO_bit(0); //0
++ PRER |= GPIO_bit(0); //0
++ // anup prashant : for gsm reset problem 19 may 2006
++ //GPDR0 |= GPIO_bit(18); YoKu Commented this line, GPIO18 should be i/p pin to avoid GSM Reset pulse
++ PGSR0 |= GPIO_bit(18); // GSM reset pin
++ PGSR0 |= GPIO_bit(0); //
++ PGSR1 |= GPIO_bit(38); // commneted .18 apr
++ // <----- YoKu
++
++ // YoKu ----->
++ // When exiting from sleep mode, 10us Low pulse comes on GSM Reset and Pwr pin
++ // to avoid this configure GPIO 18,80 as input pins before going to sleep mode
++ GPDR0 &= ~GPIO_bit(18);
++ //GPDR2 &= ~GPIO_bit(80);
++ // <----- YoKu
++
++ //kirti for RTC
++ PWER |= PWER_RTC;
++ //kirti cli();
++ local_irq_disable();
++ //kirti clf();
++ local_fiq_disable();
++ leds_event(led_stop);
++
++ /* Put Current time into RCNR */
++ RCNR = xtime.tv_sec;
+
+- /* preserve current time */
+- rtc.tv_sec = RCNR;
+- rtc.tv_nsec = 0;
+- save_time_delta(&delta, &rtc);
++ printk("11May2006 KERR: pgsr0=0x%08x pgsr1=0x%08x pgsr2= 0x%08x\n",PGSR0,PGSR1,PGSR2);
++ printk("KER_PM_DELAY: SSCR Going to Sleep at RCNR =%d\n\n\n\n\n\n",RCNR);
++
++ /*
++ * Temporary solution. This won't be necessary once
++ * we move pxa support into the serial driver
++ * Save the FF UART
++ */
++
++ // Anup : commented for power saving mode problem
++ printk("\nPM: Why doesnt it prnt?? 26May06\n");
++ printk("\nPM : GSM Sleep Mode enabled");
++
++
++ FFMCR &= ~UART_RTS;
++ udelay(2000);
++ udelay(2000);
++ FFMCR &= ~UART_DTR ;
++ udelay(2000);
++
++ udelay(2000);
++ // rupali
++ // Anup : Do not check here
++/* if(!pm_pwronoff)
++ {
++ printk("\nPM : Modem Control Register = %x " , FFMCR);
++ while( FFMSR & 0x00000020)
++ {
++ printk("\nPM : FFFSR = %x " , FFMSR);
++ }
++ } */
++ udelay(2000);
++
++//Tushar: 19 apr
++// NSSCR0 &= 0xFFFFFF7F;
++// printk("\nPM: NSSCR0 = %x" ,NSSCR0 );
++
++ SAVE(FFIER);
++ SAVE(FFLCR);
++ SAVE(FFMCR);
++ SAVE(FFSPR);
++ SAVE(FFISR);
++ FFLCR |= 0x80;
++ SAVE(FFDLL);
++ SAVE(FFDLH);
++ SAVE(FFFCR);
++ FFLCR &= 0xef;
++
++ SAVE(STIER);
++ SAVE(STLCR);
++ SAVE(STMCR);
++ SAVE(STSPR);
++ SAVE(STISR);
++ STLCR |= 0x80;
++ SAVE(STDLL);
++ SAVE(STDLH);
++ STLCR &= 0xef;
++
++ SAVE(BTIER);
++ SAVE(BTLCR);
++ SAVE(BTMCR);
++ SAVE(BTSPR);
++ SAVE(BTISR);
++ BTLCR |= 0x80;
++ SAVE(BTDLL);
++ SAVE(BTDLH);
++ BTLCR &= 0xef;
++
++ /* save vital registers */
++ SAVE(OSCR);
++ SAVE(OSMR0);
++ SAVE(OSMR1);
++ SAVE(OSMR2);
++ SAVE(OSMR3);
++ SAVE(OIER);
+
+- SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2);
+ SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2);
+ SAVE(GRER0); SAVE(GRER1); SAVE(GRER2);
+ SAVE(GFER0); SAVE(GFER1); SAVE(GFER2);
+- SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2);
+-
+ SAVE(GAFR0_L); SAVE(GAFR0_U);
+ SAVE(GAFR1_L); SAVE(GAFR1_U);
+ SAVE(GAFR2_L); SAVE(GAFR2_U);
+
+-#ifdef CONFIG_PXA27x
+- SAVE(MDREFR);
+- SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3);
+- SAVE(GAFR3_L); SAVE(GAFR3_U);
+- SAVE(PWER); SAVE(PCFR); SAVE(PRER);
+- SAVE(PFER); SAVE(PKWR);
+-#endif
++ // YoKu 23Feb06 Added To save LCD Registers, updated by kirti 24Feb06 ----->
++ SAVE(LCCR0); SAVE(LCCR1); SAVE(LCCR2); SAVE(LCCR3);
++ SAVE(FDADR0);
++ SAVE(FDADR1);
++ LCSR = 0xffffffff; /* Clear LCD Status Register */
++
++// LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
++// LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
++
++ SAVE(LDCMD0);
++ // <----- YoKu
++
++// LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
++// LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
++
+
+ SAVE(ICMR);
+ ICMR = 0;
+
+ SAVE(CKEN);
+- SAVE(PSTR);
++ CKEN = 0;
++
++ // Anup : For Wifi power saving mode 2 May 2006
++ SAVE(NSSCR0);SAVE(NSSCR1);SAVE(NSSSR);SAVE(NSSITR);SAVE(NSSDR);SAVE(NSSTO);
++ SAVE(NSSPSP);
++ printk("\nMY favourite mode in life.......sleep.....\n");
++
+
+ /* Note: wake up source are set up in each machine specific files */
+
++ /*Changes to keep the right sim selected */
++ gpsr0 = GPLR0;
++ gpsr1 = GPLR1;
++ gpsr2 = GPLR2;
++
++ /*Sim 1 selected */
++ // YoKu GPIOs Changed ----->
++ if( (GPLR0 & GPIO_bit(21)) && !(GPLR0 & GPIO_bit(22)) ) // 62,63
++ {
++ PGSR0 |= GPIO_bit(21) ; //62
++ PGSR0 &= ~GPIO_bit(22) ; //63
++ }
++ else if (!(GPLR0 & GPIO_bit(21)) && (GPLR0 & GPIO_bit(22)) ) // 62,63
++ {
++ PGSR0 |= GPIO_bit(22) ; //63
++ PGSR0 &= ~GPIO_bit(21) ; //62
++ } /* sim 2*/
++ // <----- YoKu
++
+ /* clear GPIO transition detect bits */
+ GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
+-#ifdef CONFIG_PXA27x
+- GEDR3 = GEDR3;
+-#endif
+
+ /* Clear sleep reset status */
+ RCSR = RCSR_SMR;
+
++ /* set resume return address */
++ PSPR = virt_to_phys(pxa_cpu_resume);
++
+ /* before sleeping, calculate and save a checksum */
+ for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
+ checksum += sleep_save[i];
+ sleep_save[SLEEP_SAVE_CKSUM] = checksum;
+
+- /* *** go zzz *** */
+- pxa_cpu_pm_enter(state);
++ PGSR0 |= GPIO_bit(15); //sidd for wake from Sleep 15, YoKu Comented ?? GPIO15 was ChipSelect
++ PGSR2 |= GPIO_bit(80); //sidd for GSM Engine 69, YoKu GPIO Changed Anup :commented
++
++ PGSR1 &= ~GPIO_bit(33); //Tushar: BT Codec Power Down
++
++ PGSR0 &= ~GPIO_bit(23); //Tushar: BGW200 Regulator OFF
++
++// GPDR1 |= GPIO_bit(49); //Tushar: LCD Serial Data in changed to O/P
++
++// PGSR1 &= ~GPIO_bit(48);//Tushar: LCD Serial Pins
++
++// PGSR1 &= ~GPIO_bit(49);
++
++// PGSR1 &= ~GPIO_bit(50);
++
++// PGSR1 |= GPIO_bit(51);
++
++// PGSR1 &= 0x03FFFFFF;//Tushar: 24apr LCD datalines
++// PGSR2 &= 0xFFFFFC00;
++
++ PGSR0 &= ~GPIO_bit(24); //Tushar: Mux Control Signals
++
++ PGSR0 &= ~GPIO_bit(25);
++
++ PGSR0 &= ~GPIO_bit(26);
++
++ PGSR0 &= ~GPIO_bit(27);
++
++ // GPDR0 |= GPIO_bit(17); //Tushar: unused GPIOs 19apr
++ // GPCR0 |= GPIO_bit(17);
++ PGSR0 &= ~GPIO_bit(17);
++
++// GPDR1 |= GPIO_bit(56); //Tushar: unused GPIOs 19apr
++ // GPCR1 |= GPIO_bit(56);
++ PGSR1 &= ~GPIO_bit(56);
++
++// GPDR2 |= GPIO_bit(79);//Tushar: unused GPIOs 19apr
++// GPCR2 |= GPIO_bit(79);
++ PGSR2 &= ~GPIO_bit(79);
++
++// GPDR1 |= 0x03F00000;//Tushar: unused GPIOs 19apr
++// GPCR1 |= 0x03F00000;
++ PGSR1 &= 0xFC0FFFFF;
++
++
++ GPDR0 |= GPIO_bit(19);//Tushar: SIM Present Inputs configured as outputs
++ GPDR0 |= GPIO_bit(20);
++ PGSR0 &= ~GPIO_bit(19);
++ PGSR0 &= ~GPIO_bit(20);
++
++
++//Tushar: 25apr FFRTS FFDTR & FFTXD
++
++ PGSR1 |= GPIO_bit(39);
++ PGSR1 |= GPIO_bit(40);
++ PGSR1 |= GPIO_bit(41);
++/*
++ PGSR2 &= GPIO_bit(81); //Tushar: 24apr NSSP pins
++ PGSR2 &= GPIO_bit(82);
++ PGSR2 &= GPIO_bit(83);
++
++ PGSR2 |= GPIO_bit(74);
++ PGSR2 |= GPIO_bit(75);
++ PGSR2 |= GPIO_bit(76);
++ PGSR2 |= GPIO_bit(77);
++*/
++ if(pm_pwronoff)
++ {
++ /* We are here bcos of pressing of on off switch
++ We wake up now only on pwr switch */
++ printk("Anup: Before sleeping \n");
++ pm_pwronoff = 0;
++ PGSR0 &= ~GPIO_bit(23); //7 YoKu GPIO Changed
++ //PGSR2 &= ~GPIO_bit(64); //64 YoKu Commented in PWG500 64,7 was WifiReg, IN PWG600 it is 23
++
++ PGSR2 &= ~GPIO_bit(80); //69 YoKu GPIO Changed Anup : commnented
++ PWER = 0x0004; // YoKu Changed from 0x10 to 0x04 (i.e GPIO 4 -> 2)
++ PFER = 0x0004;
++ PRER = 0x0004;
++
++// YoKu ---->
++// 11May2006 To reduce Power Off current from 7mA to 4mA
++ GPDR0 |= GPIO_bit(16); // BTReset o/p Low
++ PGSR0 &= ~GPIO_bit(16);
++
++ GPDR1 |= GPIO_bit(33); // nMEC/nPDI o/p Low
++ PGSR1 &= ~GPIO_bit(33);
++
++ GPDR1 |= GPIO_bit(45); // BTRTS o/p High
++ PGSR1 |= GPIO_bit(45);
++
++
++ GPDR1 |= GPIO_bit(43); // BTTXD o/p High
++ PGSR1 |= GPIO_bit(43);
++
++ GPDR1 &= ~GPIO_bit(42); // BTRXD i/p
++ GPDR1 &= ~GPIO_bit(44); // BTCTS i/p
++// <---- YoKu
++
++ PSPR = virt_to_phys(pxa_cpu_resume); // YoKu 29July05 to Resume from where u left, Original PSPR = 0
++ }
++
++ valbefore = GPLR0 & (GPIO_bit(21) | GPIO_bit(22)) ; // 62,63 YoKu GPIO Changed
++
++ //printk("Anup: Before sleeping gpsr0=0x%08x gpsr1=0x%08x gpsr2= 0x%08x\n",gpsr0,gpsr1,gpsr2);
++ //kirti pxa_cpu_suspend();
++ //printk("KER_PM: Going to sleep zzzzzzzzz\n");
++
++// OSCC |= OSCC_OON; //Tushar: 18 apr. enable 32.768KHz Oscillator
++
++// PCFR |= PCFR_OPDE; //Tushar: 18 apr. disable 3.6864MHz oscillator
++
++ pxa_cpu_pm_enter(PM_SUSPEND_MEM);
+
+ cpu_init();
+
++ //kirti~
++ /**/
++ //FFMCR |= UART_DTR ;
++ /**/
++
+ /* after sleeping, validate the checksum */
+ checksum = 0;
+ for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
+@@ -141,39 +464,63 @@
+ checksum = 0;
+ for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
+ checksum += sleep_save[i];
+-
+ /* if invalid, display message and wait for a hardware reset */
+- if (checksum != sleep_save[SLEEP_SAVE_CKSUM]) {
++ if (checksum != sleep_save[SLEEP_SAVE_CKSUM])
++ {
+ #ifdef CONFIG_ARCH_LUBBOCK
+ LUB_HEXLED = 0xbadbadc5;
+ #endif
+ while (1)
+- pxa_cpu_pm_enter(state);
++ {
++ printk("\n\n\nKERN_PM: CRC Error!!! after wakeup\n\n\n"); // YoKu 25May06
++
+ }
+
++ }
++ valafter = GPLR0 & (GPIO_bit(21) | GPIO_bit(22)) ; //62,63 YoKu GPIO Changed
++ pm_pedr = PEDR ;
++
+ /* ensure not to come back here if it wasn't intended */
+ PSPR = 0;
+
++ /*printk("YoKu: gafr0_L=0x%08x gafr0_U=0x%08x\n",GAFR0_L,GAFR0_U);
++ printk(" gafr1_L= 0x%08x gafr1_U= 0x%08x\n",GAFR1_L,GAFR1_U);
++ printk(" gafr2_L= 0x%08x gafr2_U= 0x%08x\n",GAFR2_L,GAFR2_U); */
+ /* restore registers */
+- RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
+ RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
++ RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
++ RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
+ RESTORE(GAFR0_L); RESTORE(GAFR0_U);
+ RESTORE(GAFR1_L); RESTORE(GAFR1_U);
+ RESTORE(GAFR2_L); RESTORE(GAFR2_U);
+- RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
+- RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
+- RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
+
+-#ifdef CONFIG_PXA27x
+- RESTORE(MDREFR);
+- RESTORE_GPLEVEL(3); RESTORE(GPDR3);
+- RESTORE(GAFR3_L); RESTORE(GAFR3_U);
+- RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
+- RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
+- RESTORE(PFER); RESTORE(PKWR);
+-#endif
+
+- PSSR = PSSR_RDH | PSSR_PH;
++ // Anup : For Wifi power saving mode 2 May 2006
++ RESTORE(NSSCR0);RESTORE(NSSCR1);RESTORE(NSSSR);RESTORE(NSSITR);RESTORE(NSSDR);RESTORE(NSSTO);
++ RESTORE(NSSPSP);
++
++ // PSSR = PSSR_PH;
++ GPSR0 = gpsr0;
++ GPSR1 = gpsr1;
++ GPSR2 = gpsr2;
++
++ // Anup : check values of these registers
++// printk("YoKu: gpsr0=0x%08x gpsr1=0x%08x gpsr2= 0x%08x\n",gpsr0,gpsr1,gpsr2);
++ //sidd
++
++ GPCR0 |= ~gpsr0;
++ GPCR1 |= ~gpsr1;
++ GPCR2 |= ~gpsr2;
++
++
++ PSSR = ~PSSR_PH;
++
++ RESTORE(OSMR0);
++ RESTORE(OSMR1);
++ RESTORE(OSMR2);
++ RESTORE(OSMR3);
++ RESTORE(OSCR);
++ RESTORE(OIER);
+
+ RESTORE(CKEN);
+
+@@ -181,62 +528,181 @@
+ ICCR = 1;
+ RESTORE(ICMR);
+
+- RESTORE(PSTR);
++ /*
++ * Temporary solution. This won't be necessary once
++ * we move pxa support into the serial driver.
++ * Restore the FF UART.
++ */
++ RESTORE(BTMCR);
++ RESTORE(BTSPR);
++ RESTORE(BTLCR);
++ BTLCR |= 0x80;
++ RESTORE(BTDLH);
++ RESTORE(BTDLL);
++ RESTORE(BTLCR);
++ RESTORE(BTISR);
++ BTFCR = 0xc7;
++ RESTORE(BTIER);
++
++ RESTORE(STMCR);
++ RESTORE(STSPR);
++ RESTORE(STLCR);
++ STLCR |= 0x80;
++ RESTORE(STDLH);
++ RESTORE(STDLL);
++ RESTORE(STLCR);
++ RESTORE(STISR);
++ STFCR = 0xc7;
++ RESTORE(STIER);
++
++ RESTORE(FFMCR);
++ RESTORE(FFSPR);
++ RESTORE(FFLCR);
++ FFLCR |= 0x80;
++ RESTORE(FFDLH);
++ RESTORE(FFDLL);
++ RESTORE(FFLCR);
++ RESTORE(FFISR);
++ RESTORE(FFFCR);
++ FFFCR = 0xc7;
++ RESTORE(FFIER);
++
++ // YoKu 23Feb06 Added To save LCD Registers, updated by kirti 24Feb06 ----->
++ RESTORE(LCCR3); RESTORE(LCCR2); RESTORE(LCCR1);
++ LCCR0=RESTORE(LCCR0) & ~LCCR0_ENB;
++ RESTORE(FDADR0); RESTORE(FDADR1);
++ LCCR0 |= LCCR0_ENB;
++
++ // <----- YoKu
+
+ /* restore current time */
+- rtc.tv_sec = RCNR;
+- restore_time_delta(&delta, &rtc);
++ xtime.tv_sec = RCNR;
++
++ valafter1 = GPLR0 & (GPIO_bit(21) | GPIO_bit(22)) ; //62,63 YoKu GPIO Changed
++
++// SSCR0 &=0xFFFFFFFF;
++// printk("\nPM : val of SSCR0 = %x " , SSCR0);
++
++ printk("KER_PM: Resumed at RCNR = %d RTSR= %x\n",RCNR,RTSR);
++
++ printk("YoKu: pgsr0=0x%08x pgsr1=0x%08x pgsr2= 0x%08x\n",PGSR0,PGSR1,PGSR2);
++
++ OSMR0 = 0; /* set initial match at 0 */
++ OSSR = 0xf; /* clear status on all timers */
++ OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */
++ OSCR = 0; /* initialize free-running timer, force first match */
++
++ leds_event(led_start);
++ //kirti sti();
++ // call i2c reset here---->
++ ICR = ICR_UR;
++ ISR = 0x7FF; //I2C_ISR_INIT;
++ ICR &= ~ICR_UR;
++
++ ISAR = 0x32;//i2c->slave_addr;
++
++ /* set control register values */
++ ICR = (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE);//I2C_ICR_INIT;
++
++ /* enable unit */
++ ICR |= ICR_IUE;
++ udelay(100);
++ //<-----
++
++ local_irq_enable();
+
+-#ifdef DEBUG
+- printk(KERN_DEBUG "*** made it back from resume\n");
+-#endif
+
+ return 0;
+ }
+
+-EXPORT_SYMBOL_GPL(pxa_pm_enter);
+-
+ unsigned long sleep_phys_sp(void *sp)
+ {
+ return virt_to_phys(sp);
+ }
+
++#ifdef CONFIG_SYSCTL
+ /*
+- * Called after processes are frozen, but before we shut down devices.
++ * ARGH! ACPI people defined CTL_ACPI in linux/acpi.h rather than
++ * linux/sysctl.h.
++ *
++ * This means our interface here won't survive long - it needs a new
++ * interface. Quick hack to get this working - use sysctl id 9999.
+ */
+-int pxa_pm_prepare(suspend_state_t state)
+-{
+- extern int pxa_cpu_pm_prepare(suspend_state_t state);
++#warning ACPI broke the kernel, this interface needs to be fixed up.
++#define CTL_ACPI 9999
++#define ACPI_S1_SLP_TYP 19
+
+- return pxa_cpu_pm_prepare(state);
++/*
++ * Send us to sleep.
++ */
++static int sysctl_pm_do_suspend(ctl_table *ctl, int write, struct file *filp,
++ void *buffer, size_t *lenp)
++{
++ int retval=0;
++ unsigned i , clock ;
++ if (write)
++ {
++ char buf[16], *p;
++ unsigned int sleepsec;
++ int len,left = *lenp;
++
++ len = left;
++ if (left > sizeof(buf))
++ left = sizeof(buf);
++ if (!copy_from_user(buf, buffer, left))
++ {
++ buf[sizeof(buf) - 1] = '\0';
++ sleepsec = simple_strtoul(buf, &p, 0);
++ printk("\nSleeping %d Pwronoff=%x RCNR=%d\n",sleepsec,pm_pwronoff,RCNR);
++ printk("\nPWER %x PFER=%x PRER=%x\n",PWER,PFER,PRER);
++ RTAR = xtime.tv_sec + sleepsec;
++ printk("\nRTAR=%d \n",RTAR);
++ }
++ }
++ retval = pm_do_suspend();
++ clock = get_memclk_frequency_10khz();
++ return retval;
+ }
+-
+-EXPORT_SYMBOL_GPL(pxa_pm_prepare);
+
+ /*
+- * Called after devices are re-setup, but before processes are thawed.
++static struct ctl_table pm_table[] =
++{
++ {ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, (proc_handler *)&sysctl_pm_do_suspend},
++ {0}
++};
+ */
+-int pxa_pm_finish(suspend_state_t state)
++static struct ctl_table pm_table[] =
+ {
+- return 0;
++ {
++ ctl_name: ACPI_S1_SLP_TYP,
++ procname: "suspend",
++ mode: 0600,
++ proc_handler: (proc_handler *)&sysctl_pm_do_suspend,
++ },
++ {
++ ctl_name: 0
+ }
++};
+
+-EXPORT_SYMBOL_GPL(pxa_pm_finish);
++static struct ctl_table pm_dir_table[] =
++{
++ {CTL_ACPI, "pm", NULL, 0, 0555, pm_table},
++ {0}
++};
+
+ /*
+- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
++ * Initialize power interface
+ */
+-static struct pm_ops pxa_pm_ops = {
+- .pm_disk_mode = PM_DISK_FIRMWARE,
+- .prepare = pxa_pm_prepare,
+- .enter = pxa_pm_enter,
+- .finish = pxa_pm_finish,
+-};
+-
+-static int __init pxa_pm_init(void)
++static int __init pm_init(void)
+ {
+- pm_set_ops(&pxa_pm_ops);
++ register_sysctl_table(pm_dir_table, 1);
++ /*Adi: Adjust for clock value to RTC
++ RTTR = RTC clk - 1*/
++ RTTR = 32913;
++
+ return 0;
+ }
+
+-device_initcall(pxa_pm_init);
++__initcall(pm_init);
++
++#endif
+diff -NurbwB linux-2.6.17/arch/arm/mach-pxa/sleep.S linux-2.6.17-patched/arch/arm/mach-pxa/sleep.S
+--- linux-2.6.17/arch/arm/mach-pxa/sleep.S 2006-06-17 18:49:35.000000000 -0700
++++ linux-2.6.17-patched/arch/arm/mach-pxa/sleep.S 2006-09-11 13:07:05.000000000 -0700
+@@ -79,7 +79,7 @@
+ ldr r5, [r4]
+
+ @ enable SDRAM self-refresh mode
+- orr r5, r5, #MDREFR_SLFRSH
++ orr r5, r5, #(MDREFR_SLFRSH | MDREFR_APD)
+
+ #ifdef CONFIG_PXA27x
+ @ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
+diff -NurbwB linux-2.6.17/include/asm-arm/arch-pxa/pxa-regs.h linux-2.6.17-patched/include/asm-arm/arch-pxa/pxa-regs.h
+--- linux-2.6.17/include/asm-arm/arch-pxa/pxa-regs.h 2006-06-17 18:49:35.000000000 -0700
++++ linux-2.6.17-patched/include/asm-arm/arch-pxa/pxa-regs.h 2006-09-11 11:04:36.000000000 -0700
+@@ -1748,6 +1748,15 @@
+ #define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL))
+ #define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL))
+
++#define NSSCR0 __REG(0x41400000) /* SSP Port 1 Control Register 0 */
++#define NSSCR1 __REG(0x41400004) /* SSP Port 1 Control Register 1 */
++#define NSSSR __REG(0x41400008) /* SSP Port 1 Status Register */
++#define NSSITR __REG(0x4140000C) /* SSP Port 1 Interrupt Test Register */
++#define NSSDR __REG(0x41400010) /* (Write / Read) SSP Port 1 Data Write Register/SSP Data Read Register */
++#define NSSTO __REG(0x41400028) /* SSP Port 1 Time Out Register */
++#define NSSPSP __REG(0x4140002C) /* SSP Port 1 Programmable Serial Port Register */
++
++
+ /*
+ * MultiMediaCard (MMC) controller
+ */
+diff -NurbwB linux-2.6.17/kernel/power/main.c linux-2.6.17-patched/kernel/power/main.c
+--- linux-2.6.17/kernel/power/main.c 2006-06-17 18:49:35.000000000 -0700
++++ linux-2.6.17-patched/kernel/power/main.c 2006-09-11 12:59:20.000000000 -0700
+@@ -66,10 +66,12 @@
+ goto Enable_cpu;
+ }
+
++ /*
+ if (freeze_processes()) {
+ error = -EAGAIN;
+ goto Thaw;
+ }
++ */
+
+ if ((free_pages = nr_free_pages()) < FREE_PAGE_NUMBER) {
+ pr_debug("PM: free some memory\n");
+@@ -110,12 +112,15 @@
+
+ local_irq_save(flags);
+
++ /*
+ if ((error = device_power_down(PMSG_SUSPEND))) {
+ printk(KERN_ERR "Some devices failed to power down\n");
+ goto Done;
+ }
++ */
++
+ error = pm_ops->enter(state);
+- device_power_up();
++ //device_power_up();
+ Done:
+ local_irq_restore(flags);
+ return error;
diff --git a/target/linux/pxa/patches/002-usb_gadget.patch b/target/linux/pxa/patches/002-usb_gadget.patch
new file mode 100644
index 0000000000..b6766d9b3b
--- /dev/null
+++ b/target/linux/pxa/patches/002-usb_gadget.patch
@@ -0,0 +1,58 @@
+diff -NurbwB linux-2.6.17/drivers/usb/gadget/pxa2xx_udc.c linux-2.6.17-patched/drivers/usb/gadget/pxa2xx_udc.c
+--- linux-2.6.17/drivers/usb/gadget/pxa2xx_udc.c 2006-06-17 18:49:35.000000000 -0700
++++ linux-2.6.17-patched/drivers/usb/gadget/pxa2xx_udc.c 2006-09-11 13:02:39.000000000 -0700
+@@ -87,8 +87,8 @@
+ static const char ep0name [] = "ep0";
+
+
+-// #define USE_DMA
+-// #define USE_OUT_DMA
++#define USE_DMA
++#define USE_OUT_DMA
+ // #define DISABLE_TEST_MODE
+
+ #ifdef CONFIG_ARCH_IXP4XX
+@@ -1513,7 +1513,7 @@
+ #endif
+
+ /* try to clear these bits before we enable the udc */
+- udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
++ udc_ack_int_UDCCR(UDCCR_SUSIR|UDCCR_RSTIR|UDCCR_RESIR);
+
+ ep0_idle(dev);
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+@@ -2043,6 +2043,9 @@
+ struct pxa2xx_udc *dev = _dev;
+ int handled;
+
++
++ udc_set_mask_UDCCR( UDCCR_REM | UDCCR_SRM);
++
+ dev->stats.irqs++;
+ HEX_DISPLAY(dev->stats.irqs);
+ do {
+@@ -2137,6 +2139,8 @@
+ /* we could also ask for 1 msec SOF (SIR) interrupts */
+
+ } while (handled);
++
++ udc_clear_mask_UDCCR( UDCCR_SRM | UDCCR_REM);
+ return IRQ_HANDLED;
+ }
+
+@@ -2437,6 +2441,7 @@
+ int retval, out_dma = 1;
+ u32 chiprev;
+
++ local_irq_disable();
+ /* insist on Intel/ARM/XScale */
+ asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev));
+ if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
+@@ -2553,6 +2558,7 @@
+ #endif
+ }
+ #endif
++ local_irq_enable();
+ create_proc_files();
+
+ return 0;
diff --git a/target/linux/pxa/patches/004-skbuf_hack.patch b/target/linux/pxa/patches/004-skbuf_hack.patch
new file mode 100644
index 0000000000..434e3b98b1
--- /dev/null
+++ b/target/linux/pxa/patches/004-skbuf_hack.patch
@@ -0,0 +1,10 @@
+--- linux-2.6.17/include/linux/skbuff.h 2006-09-20 16:13:42.000000000 -0700
++++ linux-2.6.17-patched/include/linux/skbuff.h 2006-09-20 16:14:29.000000000 -0700
+@@ -239,6 +239,7 @@
+ } nh;
+
+ union {
++ struct ethhdr *ethernet;
+ unsigned char *raw;
+ } mac;
+
diff --git a/target/linux/pxa/patches/005-mtd.patch b/target/linux/pxa/patches/005-mtd.patch
new file mode 100644
index 0000000000..6156b6a930
--- /dev/null
+++ b/target/linux/pxa/patches/005-mtd.patch
@@ -0,0 +1,111 @@
+diff -Nurb linux-2.6.17/drivers/mtd/chips/cfi_cmdset_0001.c linux-2.6.17-patched/drivers/mtd/chips/cfi_cmdset_0001.c
+--- linux-2.6.17/drivers/mtd/chips/cfi_cmdset_0001.c 2006-06-17 18:49:35.000000000 -0700
++++ linux-2.6.17-patched/drivers/mtd/chips/cfi_cmdset_0001.c 2006-09-25 11:27:06.000000000 -0700
+@@ -40,7 +40,7 @@
+ /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */
+
+ // debugging, turns off buffer write mode if set to 1
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+
+ #define MANUFACTURER_INTEL 0x0089
+ #define I82802AB 0x00ad
+diff -Nurb linux-2.6.17/drivers/mtd/maps/lubbock-flash.c linux-2.6.17-patched/drivers/mtd/maps/lubbock-flash.c
+--- linux-2.6.17/drivers/mtd/maps/lubbock-flash.c 2006-06-17 18:49:35.000000000 -0700
++++ linux-2.6.17-patched/drivers/mtd/maps/lubbock-flash.c 2006-09-25 10:50:08.000000000 -0700
+@@ -26,6 +26,7 @@
+ #include <asm/hardware.h>
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/arch/lubbock.h>
++#include <linux/mtd/concat.h>
+
+
+ #define ROM_ADDR 0x00000000
+@@ -48,24 +49,27 @@
+ .inval_cache = lubbock_map_inval_cache,
+ } };
+
+-static struct mtd_partition lubbock_partitions[] = {
++static struct mtd_partition lubbock_partitions[] =
++{
+ {
+- .name = "Bootloader",
+- .size = 0x00040000,
+- .offset = 0,
+- .mask_flags = MTD_WRITEABLE /* force read-only */
+- },{
+- .name = "Kernel",
+- .size = 0x00100000,
+- .offset = 0x00040000,
+- },{
+- .name = "Filesystem",
+- .size = MTDPART_SIZ_FULL,
+- .offset = 0x00140000
+- }
++ .name = "root",
++ .offset = 0x00410000
++ },
++ {
++ .name = "kernel",
++ .size = 0x00150000,
++ .offset = 0x000B0000
++ },
++ {
++ .name = "bootloader",
++ .size = 0x000B0000,
++ .offset = 0x00000000
++ },
+ };
+
++
+ static struct mtd_info *mymtds[2];
++static struct mtd_info *merged_mtd;
+ static struct mtd_partition *parsed_parts[2];
+ static int nr_parsed_parts[2];
+
+@@ -83,8 +87,8 @@
+ printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
+ flashboot?"Flash":"ROM", flashboot);
+
+- lubbock_maps[flashboot^1].name = "Lubbock Application Flash";
+- lubbock_maps[flashboot].name = "Lubbock Boot ROM";
++ lubbock_maps[flashboot^1].name = "Flash-1";
++ lubbock_maps[flashboot].name = "Flash-0";
+
+ for (i = 0; i < 2; i++) {
+ lubbock_maps[i].virt = ioremap(lubbock_maps[i].phys, WINDOW_SIZE);
+@@ -125,25 +129,23 @@
+ if (!mymtds[0] && !mymtds[1])
+ return ret;
+
+- for (i = 0; i < 2; i++) {
+- if (!mymtds[i]) {
+- printk(KERN_WARNING "%s is absent. Skipping\n", lubbock_maps[i].name);
+- } else if (nr_parsed_parts[i]) {
+- add_mtd_partitions(mymtds[i], parsed_parts[i], nr_parsed_parts[i]);
+- } else if (!i) {
+- printk("Using static partitions on %s\n", lubbock_maps[i].name);
+- add_mtd_partitions(mymtds[i], lubbock_partitions, ARRAY_SIZE(lubbock_partitions));
+- } else {
+- printk("Registering %s as whole device\n", lubbock_maps[i].name);
+- add_mtd_device(mymtds[i]);
+- }
+- }
++ if (mymtds[0] && mymtds[1]) {
++ merged_mtd = mtd_concat_create(mymtds, 2, "Concated Flash #1 and #2");
++ if(merged_mtd)
++ add_mtd_partitions(merged_mtd, lubbock_partitions, ARRAY_SIZE(lubbock_partitions));
++ else
++ printk("YoKu: Failed to concate\n");
+ return 0;
++ }
+ }
+
+ static void __exit cleanup_lubbock(void)
+ {
+ int i;
++
++ del_mtd_partitions(merged_mtd);
++ map_destroy(merged_mtd);
++
+ for (i = 0; i < 2; i++) {