diff options
Diffstat (limited to 'target/linux/mvebu')
64 files changed, 0 insertions, 6809 deletions
diff --git a/target/linux/mvebu/config-4.14 b/target/linux/mvebu/config-4.14 deleted file mode 100644 index 7a0caeeb61..0000000000 --- a/target/linux/mvebu/config-4.14 +++ /dev/null @@ -1,498 +0,0 @@ -CONFIG_AHCI_MVEBU=y -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MVEBU=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -CONFIG_ARMADA_370_CLK=y -CONFIG_ARMADA_370_XP_IRQ=y -CONFIG_ARMADA_370_XP_TIMER=y -CONFIG_ARMADA_38X_CLK=y -CONFIG_ARMADA_THERMAL=y -CONFIG_ARMADA_XP_CLK=y -CONFIG_ARM_APPENDED_DTB=y -# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_CRYPTO=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GLOBAL_TIMER=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_MVEBU_V7_CPUIDLE=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y -CONFIG_ATA=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BOUNCE=y -# CONFIG_CACHE_FEROCEON_L2 is not set -CONFIG_CACHE_L2X0=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PJ4B=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_AES_ARM=y -CONFIG_CRYPTO_AES_ARM_BS=y -# CONFIG_CRYPTO_AES_ARM_CE is not set -# CONFIG_CRYPTO_CHACHA20_NEON is not set -CONFIG_CRYPTO_CRC32=y -CONFIG_CRYPTO_CRC32C=y -# CONFIG_CRYPTO_CRC32_ARM_CE is not set -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_MARVELL_CESA=y -# CONFIG_CRYPTO_GHASH_ARM_CE is not set -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA1_ARM=y -# CONFIG_CRYPTO_SHA1_ARM_CE is not set -CONFIG_CRYPTO_SHA1_ARM_NEON=y -CONFIG_CRYPTO_SHA256_ARM=y -# CONFIG_CRYPTO_SHA2_ARM_CE is not set -CONFIG_CRYPTO_SHA512_ARM=y -CONFIG_CRYPTO_SIMD=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_ALIGN_RODATA=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_MVEBU_UART0=y -# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set -# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set -CONFIG_DEBUG_UART_8250=y -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set -CONFIG_DEBUG_UART_8250_SHIFT=2 -# CONFIG_DEBUG_UART_8250_WORD is not set -CONFIG_DEBUG_UART_PHYS=0xd0012000 -CONFIG_DEBUG_UART_VIRT=0xfec12000 -CONFIG_DEBUG_UNCOMPRESS=y -CONFIG_DEBUG_USER=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_ENGINE_RAID=y -CONFIG_DMA_OF=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EXT4_FS=y -CONFIG_EXTCON=y -# CONFIG_F2FS_CHECK_FS is not set -CONFIG_F2FS_FS=y -# CONFIG_F2FS_FS_SECURITY is not set -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_STAT_FS=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FS_MBCACHE=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GLOB=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_GPIO_MVEBU=y -CONFIG_GPIO_PCA953X=y -CONFIG_GPIO_PCA953X_IRQ=y -CONFIG_GPIO_SYSFS=y -# CONFIG_GRO_CELLS is not set -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_SMCCC=y -CONFIG_HAVE_ARM_TWD=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_EBPF_JIT=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HOTPLUG_CPU=y -CONFIG_HWBM=y -CONFIG_HWMON=y -CONFIG_HW_RANDOM=y -# CONFIG_HW_RANDOM_OMAP is not set -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MV64XXX=y -# CONFIG_I2C_PXA is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IOMMU_HELPER=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_DEBUG=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -# CONFIG_IWMMXT is not set -CONFIG_JBD2=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_PCA963X=y -CONFIG_LEDS_TLC591XX=y -CONFIG_LEDS_TRIGGER_DISK=y -CONFIG_LIBFDT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_ARMADA_370=y -# CONFIG_MACH_ARMADA_375 is not set -CONFIG_MACH_ARMADA_38X=y -# CONFIG_MACH_ARMADA_39X is not set -CONFIG_MACH_ARMADA_XP=y -# CONFIG_MACH_DOVE is not set -CONFIG_MACH_MVEBU_ANY=y -CONFIG_MACH_MVEBU_V7=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MANGLE_BOOTARGS=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_I2C=y -CONFIG_MEMORY=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_MVSDIO=y -CONFIG_MMC_SDHCI=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MMC_SDHCI_PXAV3=y -# CONFIG_MMC_TIFM_SD is not set -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_PXA3xx=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_MVEBU_CLK_COMMON=y -CONFIG_MVEBU_CLK_COREDIV=y -CONFIG_MVEBU_CLK_CPU=y -CONFIG_MVEBU_DEVBUS=y -CONFIG_MVEBU_MBUS=y -CONFIG_MVMDIO=y -CONFIG_MVNETA=y -CONFIG_MVNETA_BM=y -CONFIG_MVNETA_BM_ENABLE=y -CONFIG_MVPP2=y -CONFIG_MVSW61XX_PHY=y -CONFIG_MV_XOR=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6XXX=y -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -CONFIG_NET_DSA_TAG_DSA=y -CONFIG_NET_DSA_TAG_EDSA=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NLS=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_NO_BOOTMEM=y -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_ORION_WATCHDOG=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCI_MVEBU=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -# CONFIG_PHY_MVEBU_CP110_COMPHY is not set -CONFIG_PINCTRL=y -CONFIG_PINCTRL_ARMADA_370=y -CONFIG_PINCTRL_ARMADA_38X=y -CONFIG_PINCTRL_ARMADA_XP=y -CONFIG_PINCTRL_MVEBU=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PJ4B_ERRATA_4742=y -# CONFIG_PL310_ERRATA_588369 is not set -# CONFIG_PL310_ERRATA_727915 is not set -CONFIG_PL310_ERRATA_753970=y -# CONFIG_PL310_ERRATA_769419 is not set -CONFIG_PLAT_ORION=y -CONFIG_PM_OPP=y -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=11 -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -CONFIG_RATIONAL=y -CONFIG_RCU_NEED_SEGCBLIST=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_ARMADA38X=y -CONFIG_RTC_DRV_MV=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_SATA_MV=y -CONFIG_SATA_PMP=y -# CONFIG_SCHED_INFO is not set -CONFIG_SCSI=y -CONFIG_SENSORS_PWM_FAN=y -CONFIG_SENSORS_TMP421=y -CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_MVEBU_CONSOLE=y -CONFIG_SERIAL_MVEBU_UART=y -CONFIG_SFP=y -CONFIG_SG_POOL=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SOC_BUS=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -# CONFIG_SPI_ARMADA_3700 is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_ORION=y -CONFIG_SRAM=y -CONFIG_SRAM_EXEC=y -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWIOTLB=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_ORION=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_LEDS_TRIGGER_USBPORT=y -CONFIG_USB_PHY=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_MVEBU=y -CONFIG_USB_XHCI_PCI=y -CONFIG_USB_XHCI_PLATFORM=y -CONFIG_USE_OF=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/mvebu/cortexa53/config-4.14 b/target/linux/mvebu/cortexa53/config-4.14 deleted file mode 100644 index df5f6f341b..0000000000 --- a/target/linux/mvebu/cortexa53/config-4.14 +++ /dev/null @@ -1,113 +0,0 @@ -CONFIG_64BIT=y -# CONFIG_ACPI is not set -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y -CONFIG_ARCH_HAS_KCOV=y -CONFIG_ARCH_MMAP_RND_BITS=18 -CONFIG_ARCH_MMAP_RND_BITS_MAX=24 -CONFIG_ARCH_MMAP_RND_BITS_MIN=18 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set -CONFIG_ARCH_PHYS_ADDR_T_64BIT=y -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y -CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y -CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_FRAME_POINTERS=y -CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y -CONFIG_ARM64=y -# CONFIG_ARM64_16K_PAGES is not set -CONFIG_ARM64_4K_PAGES=y -# CONFIG_ARM64_64K_PAGES is not set -CONFIG_ARM64_CONT_SHIFT=4 -# CONFIG_ARM64_CRYPTO is not set -# CONFIG_ARM64_HW_AFDBM is not set -# CONFIG_ARM64_LSE_ATOMICS is not set -CONFIG_ARM64_PAGE_SHIFT=12 -# CONFIG_ARM64_PAN is not set -# CONFIG_ARM64_PMEM is not set -# CONFIG_ARM64_PTDUMP_CORE is not set -# CONFIG_ARM64_PTDUMP_DEBUGFS is not set -# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set -CONFIG_ARM64_SSBD=y -# CONFIG_ARM64_UAO is not set -CONFIG_ARM64_VA_BITS=39 -CONFIG_ARM64_VA_BITS_39=y -# CONFIG_ARM64_VA_BITS_48 is not set -# CONFIG_ARM64_VHE is not set -CONFIG_ARMADA_37XX_CLK=y -CONFIG_ARMADA_AP806_SYSCON=y -CONFIG_ARMADA_CP110_SYSCON=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_ARMADA_37XX_CPUFREQ=y -CONFIG_ARM_GIC_V2M=y -CONFIG_ARM_GIC_V3=y -CONFIG_ARM_GIC_V3_ITS=y -# CONFIG_ARM_PL172_MPMC is not set -CONFIG_ARM_PSCI_FW=y -# CONFIG_ARM_SP805_WATCHDOG is not set -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y -# CONFIG_DEBUG_ALIGN_RODATA is not set -CONFIG_FRAME_POINTER=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y -CONFIG_HAVE_ARCH_HUGE_VMAP=y -CONFIG_HAVE_ARCH_KASAN=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARCH_VMAP_STACK=y -CONFIG_HAVE_CMPXCHG_DOUBLE=y -CONFIG_HAVE_CMPXCHG_LOCAL=y -CONFIG_HAVE_DEBUG_BUGVERBOSE=y -CONFIG_HAVE_GENERIC_GUP=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_HAVE_PATA_PLATFORM=y -CONFIG_HAVE_RCU_TABLE_FREE=y -CONFIG_HOLES_IN_ZONE=y -# CONFIG_HUGETLBFS is not set -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_MFD_SYSCON=y -CONFIG_MMC_SDHCI_XENON=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_MVEBU_GICP=y -CONFIG_MVEBU_ICU=y -CONFIG_MVEBU_ODMI=y -CONFIG_MVEBU_PIC=y -CONFIG_NEED_SG_DMA_LENGTH=y -# CONFIG_NUMA is not set -CONFIG_PARTITION_PERCPU=y -CONFIG_PCI_AARDVARK=y -CONFIG_PCI_BUS_ADDR_T_64BIT=y -CONFIG_PGTABLE_LEVELS=3 -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_PINCTRL_ARMADA_37XX=y -CONFIG_PINCTRL_ARMADA_AP806=y -CONFIG_PINCTRL_ARMADA_CP110=y -CONFIG_POWER_RESET=y -CONFIG_POWER_SUPPLY=y -# CONFIG_RANDOMIZE_BASE is not set -CONFIG_REGULATOR_GPIO=y -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SPARSEMEM=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SPI_ARMADA_3700=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_SUPPORTS_HUGETLBFS=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_UNMAP_KERNEL_AT_EL0=y -CONFIG_VMAP_STACK=y diff --git a/target/linux/mvebu/cortexa72/config-4.14 b/target/linux/mvebu/cortexa72/config-4.14 deleted file mode 100644 index f9bcefc4c5..0000000000 --- a/target/linux/mvebu/cortexa72/config-4.14 +++ /dev/null @@ -1,121 +0,0 @@ -CONFIG_64BIT=y -# CONFIG_ACPI is not set -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y -CONFIG_ARCH_HAS_KCOV=y -CONFIG_ARCH_MMAP_RND_BITS=18 -CONFIG_ARCH_MMAP_RND_BITS_MAX=24 -CONFIG_ARCH_MMAP_RND_BITS_MIN=18 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set -CONFIG_ARCH_PHYS_ADDR_T_64BIT=y -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y -CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y -CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_FRAME_POINTERS=y -CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y -CONFIG_ARM64=y -# CONFIG_ARM64_16K_PAGES is not set -CONFIG_ARM64_4K_PAGES=y -# CONFIG_ARM64_64K_PAGES is not set -CONFIG_ARM64_CONT_SHIFT=4 -# CONFIG_ARM64_CRYPTO is not set -# CONFIG_ARM64_HW_AFDBM is not set -# CONFIG_ARM64_LSE_ATOMICS is not set -CONFIG_ARM64_PAGE_SHIFT=12 -# CONFIG_ARM64_PAN is not set -# CONFIG_ARM64_PMEM is not set -# CONFIG_ARM64_PTDUMP_CORE is not set -# CONFIG_ARM64_PTDUMP_DEBUGFS is not set -# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set -CONFIG_ARM64_SSBD=y -# CONFIG_ARM64_UAO is not set -CONFIG_ARM64_VA_BITS=39 -CONFIG_ARM64_VA_BITS_39=y -# CONFIG_ARM64_VA_BITS_48 is not set -# CONFIG_ARM64_VHE is not set -CONFIG_ARMADA_37XX_CLK=y -CONFIG_ARMADA_AP806_SYSCON=y -CONFIG_ARMADA_CP110_SYSCON=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_GIC_V2M=y -CONFIG_ARM_GIC_V3=y -CONFIG_ARM_GIC_V3_ITS=y -# CONFIG_ARM_PL172_MPMC is not set -CONFIG_ARM_PSCI_FW=y -# CONFIG_ARM_SP805_WATCHDOG is not set -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y -# CONFIG_DEBUG_ALIGN_RODATA is not set -CONFIG_FRAME_POINTER=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y -CONFIG_HAVE_ARCH_HUGE_VMAP=y -CONFIG_HAVE_ARCH_KASAN=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARCH_VMAP_STACK=y -CONFIG_HAVE_CMPXCHG_DOUBLE=y -CONFIG_HAVE_CMPXCHG_LOCAL=y -CONFIG_HAVE_DEBUG_BUGVERBOSE=y -CONFIG_HAVE_GENERIC_GUP=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_HAVE_PATA_PLATFORM=y -CONFIG_HAVE_RCU_TABLE_FREE=y -CONFIG_HOLES_IN_ZONE=y -# CONFIG_HUGETLBFS is not set -CONFIG_HW_RANDOM_OMAP=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_MARVELL_10G_PHY=y -CONFIG_MFD_SYSCON=y -CONFIG_MMC_SDHCI_XENON=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_MVEBU_GICP=y -CONFIG_MVEBU_ICU=y -CONFIG_MVEBU_ODMI=y -CONFIG_MVEBU_PIC=y -CONFIG_MV_XOR_V2=y -CONFIG_NEED_SG_DMA_LENGTH=y -# CONFIG_NUMA is not set -CONFIG_PARTITION_PERCPU=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_ARMADA_8K=y -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -# CONFIG_PCI_AARDVARK is not set -CONFIG_PCI_BUS_ADDR_T_64BIT=y -CONFIG_PGTABLE_LEVELS=3 -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_PHY_MVEBU_CP110_COMPHY=y -CONFIG_PINCTRL_ARMADA_37XX=y -CONFIG_PINCTRL_ARMADA_AP806=y -CONFIG_PINCTRL_ARMADA_CP110=y -CONFIG_POWER_RESET=y -CONFIG_POWER_SUPPLY=y -# CONFIG_RANDOMIZE_BASE is not set -CONFIG_RAS=y -CONFIG_REGULATOR_GPIO=y -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SPARSEMEM=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_SUPPORTS_HUGETLBFS=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_UNMAP_KERNEL_AT_EL0=y -CONFIG_VMAP_STACK=y diff --git a/target/linux/mvebu/files-4.14/arch/arm/boot/dts/armada-385-linksys-venom.dts b/target/linux/mvebu/files-4.14/arch/arm/boot/dts/armada-385-linksys-venom.dts deleted file mode 100644 index 2e0bed815f..0000000000 --- a/target/linux/mvebu/files-4.14/arch/arm/boot/dts/armada-385-linksys-venom.dts +++ /dev/null @@ -1,207 +0,0 @@ -/* - * Device Tree file for the Linksys WRT32X (Venom) - * - * Copyright (C) 2017 Imre Kaloz <kaloz@openwrt.org> - * - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "armada-385-linksys.dtsi" - -/ { - model = "Linksys WRT32X"; - compatible = "linksys,venom", "linksys,armada385", "marvell,armada385", - "marvell,armada380"; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - append-rootblock = "root=/dev/mtdblock"; - }; -}; - - &expander0 { - wan_amber@0 { - label = "venom:amber:wan"; - reg = <0x0>; - }; - - wan_blue@1 { - label = "venom:blue:wan"; - reg = <0x1>; - }; - - usb2@5 { - label = "venom:blue:usb2"; - reg = <0x5>; - }; - - usb3_1@6 { - label = "venom:blue:usb3_1"; - reg = <0x6>; - }; - - usb3_2@7 { - label = "venom:blue:usb3_2"; - reg = <0x7>; - }; - - wps_blue@8 { - label = "venom:blue:wps"; - reg = <0x8>; - }; - - wps_amber@9 { - label = "venom:amber:wps"; - reg = <0x9>; - }; - }; - - &gpio_leds { - power { - gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; - label = "venom:blue:power"; - }; - - sata { - gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; - label = "venom:blue:sata"; - }; - - wlan_2g { - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - label = "venom:blue:wlan_2g"; - }; - - wlan_5g { - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - label = "venom:blue:wlan_5g"; - }; - }; - - &gpio_leds_pins { - marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56"; - }; - - &nand { - /* Spansion S34ML02G2 256MiB, OEM Layout */ - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MB */ - read-only; - }; - - partition@200000 { - label = "u_env"; - reg = <0x200000 0x20000>; /* 128KB */ - }; - - partition@220000 { - label = "s_env"; - reg = <0x220000 0x40000>; /* 256KB */ - }; - - partition@180000 { - label = "unused_area"; - reg = <0x260000 0x5c0000>; /* 5.75MB */ - }; - - partition@7e0000 { - label = "devinfo"; - reg = <0x7e0000 0x40000>; /* 256KB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@900000 { - label = "kernel1"; - reg = <0x900000 0x7b00000>; /* 123MB */ - }; - - partition@c00000 { - label = "rootfs1"; - reg = <0xc00000 0x7800000>; /* 120MB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@8400000 { - label = "kernel2"; - reg = <0x8400000 0x7b00000>; /* 123MB */ - }; - - partition@8700000 { - label = "rootfs2"; - reg = <0x8700000 0x7800000>; /* 120MB */ - }; - - /* last MB is for the BBT, not writable */ - partition@ff00000 { - label = "BBT"; - reg = <0xff00000 0x100000>; - }; - }; - - - &pcie1 { - mwlwifi { - marvell,chainmask = <4 4>; - }; - }; - - &pcie2 { - mwlwifi { - marvell,chainmask = <4 4>; - }; - }; - - &sdhci { - pinctrl-names = "default"; - pinctrl-0 = <&sdhci_pins>; - no-1-8-v; - non-removable; - wp-inverted; - bus-width = <8>; - status = "okay"; - }; - - &usb3_1_vbus { - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - - &usb3_1_vbus_pins { - marvell,pins = "mpp44"; - }; diff --git a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts deleted file mode 100644 index ef90a1bd38..0000000000 --- a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts +++ /dev/null @@ -1,28 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC - * Copyright (C) 2018 Marvell - * - * Romain Perier <romain.perier@free-electrons.com> - * Konstantin Porotchkin <kostap@marvell.com> - * - */ - -#include "armada-3720-espressobin.dts" - -/ { - model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; - compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", - "marvell,armada3720", "marvell,armada3710"; -}; - -&sdhci0 { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; - }; -}; diff --git a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts deleted file mode 100644 index 2b565ca8d8..0000000000 --- a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC - * Copyright (C) 2018 Marvell - * - * Romain Perier <romain.perier@free-electrons.com> - * Konstantin Porotchkin <kostap@marvell.com> - * - */ - -#include "armada-3720-espressobin.dts" - -/ { - model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)"; - compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", - "globalscale,espressobin", "marvell,armada3720", - "marvell,armada3710"; -}; - -&ports { - port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&switch0phy0>; - }; - - port@3 { - reg = <3>; - label = "wan"; - phy-handle = <&switch0phy2>; - }; -}; - -&sdhci0 { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; - }; -}; diff --git a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts deleted file mode 100644 index 8a408c3c48..0000000000 --- a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 - * Copyright (C) 2018 Marvell - * - * Romain Perier <romain.perier@free-electrons.com> - * Konstantin Porotchkin <kostap@marvell.com> - * - */ - -#include "armada-3720-espressobin.dts" - -/ { - model = "Globalscale Marvell ESPRESSOBin Board V7"; - compatible = "globalscale,espressobin-v7", "globalscale,espressobin", - "marvell,armada3720", "marvell,armada3710"; -}; - -&ports { - port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&switch0phy0>; - }; - - port@3 { - reg = <3>; - label = "wan"; - phy-handle = <&switch0phy2>; - }; -}; diff --git a/target/linux/mvebu/patches-4.14/002-add_powertables.patch b/target/linux/mvebu/patches-4.14/002-add_powertables.patch deleted file mode 100644 index c5a211dd40..0000000000 --- a/target/linux/mvebu/patches-4.14/002-add_powertables.patch +++ /dev/null @@ -1,770 +0,0 @@ ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi -@@ -237,11 +237,19 @@ - &pcie1 { - /* Marvell 88W8864, 5GHz-only */ - status = "okay"; -+ -+ mwlwifi { -+ marvell,2ghz = <0>; -+ }; - }; - - &pcie2 { - /* Marvell 88W8864, 2GHz-only */ - status = "okay"; -+ -+ mwlwifi { -+ marvell,5ghz = <0>; -+ }; - }; - - &pinctrl { ---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts -@@ -169,3 +169,205 @@ - reg = <0x280000 0x680000>; /* 6.5MiB */ - }; - }; -+ -+&pcie1 { -+ mwlwifi { -+ marvell,chainmask = <2 2>; -+ marvell,powertable { -+ AU = -+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, -+ <149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>, -+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>, -+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>, -+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>, -+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>; -+ CA = -+ <36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>, -+ <40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>, -+ <44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>, -+ <48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>; -+ CN = -+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>, -+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>, -+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>, -+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>, -+ <165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>; -+ ETSI = -+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, -+ <149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>; -+ FCC = -+ <36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, -+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>; -+ }; -+ }; -+}; -+ -+&pcie2 { -+ mwlwifi { -+ marvell,chainmask = <2 2>; -+ marvell,powertable { -+ AU = -+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>; -+ CA = -+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>, -+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, -+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>; -+ CN = -+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>; -+ ETSI = -+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>; -+ FCC = -+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts -@@ -169,3 +169,205 @@ - reg = <0x280000 0x680000>; /* 6.5MiB */ - }; - }; -+ -+&pcie1 { -+ mwlwifi { -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ AU = -+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>; -+ CA = -+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>; -+ CN = -+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>; -+ ETSI = -+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>; -+ FCC = -+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>, -+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, -+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, -+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>; -+ }; -+ }; -+}; -+ -+&pcie2 { -+ mwlwifi { -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ AU = -+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; -+ CA = -+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>; -+ CN = -+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; -+ ETSI = -+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; -+ FCC = -+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts -@@ -169,3 +169,205 @@ - reg = <0x280000 0x680000>; /* 6.5MiB */ - }; - }; -+ -+&pcie1 { -+ mwlwifi { -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ AU = -+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, -+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>; -+ CA = -+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>; -+ CN = -+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, -+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>; -+ ETSI = -+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, -+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>; -+ FCC = -+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>, -+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, -+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, -+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, -+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, -+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, -+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, -+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>; -+ }; -+ }; -+}; -+ -+&pcie2 { -+ mwlwifi { -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ AU = -+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; -+ CA = -+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>; -+ CN = -+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; -+ ETSI = -+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; -+ FCC = -+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts -@@ -184,6 +184,18 @@ - }; - }; - -+&pcie1 { -+ mwlwifi { -+ marvell,chainmask = <4 4>; -+ }; -+}; -+ -+&pcie2 { -+ mwlwifi { -+ marvell,chainmask = <4 4>; -+ }; -+}; -+ - &sdhci { - pinctrl-names = "default"; - pinctrl-0 = <&sdhci_pins>; ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -376,12 +376,100 @@ - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; -+ -+ mwlwifi { -+ marvell,5ghz = <0>; -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ FCC = -+ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>; -+ -+ ETSI = -+ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>; -+ }; -+ }; - }; - - /* Second mini-PCIe port */ - pcie@3,0 { - /* Port 0, Lane 3 */ - status = "okay"; -+ -+ mwlwifi { -+ marvell,2ghz = <0>; -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ FCC = -+ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>; -+ -+ ETSI = -+ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>; -+ }; -+ }; - }; - }; - diff --git a/target/linux/mvebu/patches-4.14/003-add_switch_nodes.patch b/target/linux/mvebu/patches-4.14/003-add_switch_nodes.patch deleted file mode 100644 index 5d43d9f0f8..0000000000 --- a/target/linux/mvebu/patches-4.14/003-add_switch_nodes.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -361,6 +361,16 @@ - }; - }; - }; -+ -+ mvsw61xx { -+ compatible = "marvell,88e6172"; -+ status = "okay"; -+ reg = <0x10>; -+ -+ mii-bus = <&mdio>; -+ cpu-port-0 = <5>; -+ cpu-port-1 = <6>; -+ }; - }; - - &pciec { ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi -@@ -113,6 +113,18 @@ - linux,default-trigger = "disk-activity"; - }; - }; -+ -+ mvsw61xx { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "marvell,88e6176"; -+ status = "okay"; -+ reg = <0x10>; -+ -+ mii-bus = <&mdio>; -+ cpu-port-0 = <5>; -+ cpu-port-1 = <6>; -+ }; - }; - - &ahci0 { diff --git a/target/linux/mvebu/patches-4.14/004-add_sata_disk_activity_trigger.patch b/target/linux/mvebu/patches-4.14/004-add_sata_disk_activity_trigger.patch deleted file mode 100644 index 1a2b33cb1a..0000000000 --- a/target/linux/mvebu/patches-4.14/004-add_sata_disk_activity_trigger.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 172230195068703b78ad5733a09492f5d6814c09 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith <ansuelsmth@gmail.com> -Date: Tue, 28 Feb 2017 14:15:50 +0100 -Subject: [PATCH] ARM: dts: armada: Add default trigger for sata led - -In others board we have the sata led set to function -with the sata led trigger by default. -This patch makes the same for these board that have sata -led but get disabled by not associating it to any trigger. - -Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> -Acked-by: Jason Cooper <jason@lakedaemon.net> -Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> ---- - arch/arm/boot/dts/armada-385-linksys-caiman.dts | 1 + - arch/arm/boot/dts/armada-385-linksys-cobra.dts | 1 + - arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 1 + - 3 files changed, 3 insertions(+) - ---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts -@@ -100,6 +100,7 @@ - - sata { - label = "caiman:white:sata"; -+ linux,default-trigger = "disk-activity"; - }; - }; - ---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts -@@ -100,6 +100,7 @@ - - sata { - label = "cobra:white:sata"; -+ linux,default-trigger = "disk-activity"; - }; - }; - diff --git a/target/linux/mvebu/patches-4.14/005-linksys_hardcode_nand_ecc_settings.patch b/target/linux/mvebu/patches-4.14/005-linksys_hardcode_nand_ecc_settings.patch deleted file mode 100644 index c00e153239..0000000000 --- a/target/linux/mvebu/patches-4.14/005-linksys_hardcode_nand_ecc_settings.patch +++ /dev/null @@ -1,17 +0,0 @@ -Newer Linksys boards might come with a Winbond W29N02GV which can be -configured in different ways. Make sure we configure it the same way -as the older chips so everything keeps working. - -Signed-off-by: Imre Kaloz <kaloz@openwrt.org> - ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi -@@ -185,6 +185,8 @@ - /* 128MiB or 256MiB */ - status = "okay"; - num-cs = <1>; -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; diff --git a/target/linux/mvebu/patches-4.14/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/mvebu/patches-4.14/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch deleted file mode 100644 index 4ef86edb6a..0000000000 --- a/target/linux/mvebu/patches-4.14/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch +++ /dev/null @@ -1,201 +0,0 @@ -From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001 -From: Adrian Panella <ianchi74@outlook.com> -Date: Thu, 9 Mar 2017 09:37:17 +0100 -Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments - -The command-line arguments provided by the boot loader will be -appended to a new device tree property: bootloader-args. -If there is a property "append-rootblock" in DT under /chosen -and a root= option in bootloaders command line it will be parsed -and added to DT bootargs with the form: <append-rootblock>XX. -Only command line ATAG will be processed, the rest of the ATAGs -sent by bootloader will be ignored. -This is usefull in dual boot systems, to get the current root partition -without afecting the rest of the system. - -Signed-off-by: Adrian Panella <ianchi74@outlook.com> - -This patch has been modified to be mvebu specific. The original patch -did not pass the bootloader cmdline on if no append-rootblock stanza -was found, resulting in blank cmdline and failure to boot. - -Signed-off-by: Michael Gray <michael.gray@lantisproject.com> ---- - arch/arm/Kconfig | 11 +++++ - arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++- - init/main.c | 16 ++++++++ - 3 files changed, 98 insertions(+), 1 deletion(-) - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -1934,6 +1934,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN - The command-line arguments provided by the boot loader will be - appended to the the device tree bootargs property. - -+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE -+ bool "Append rootblock parsing bootloader's kernel arguments" -+ help -+ The command-line arguments provided by the boot loader will be -+ appended to a new device tree property: bootloader-args. -+ If there is a property "append-rootblock" in DT under /chosen -+ and a root= option in bootloaders command line it will be parsed -+ and added to DT bootargs with the form: <append-rootblock>XX. -+ Only command line ATAG will be processed, the rest of the ATAGs -+ sent by bootloader will be ignored. -+ - endchoice - - config CMDLINE ---- a/arch/arm/boot/compressed/atags_to_fdt.c -+++ b/arch/arm/boot/compressed/atags_to_fdt.c -@@ -4,6 +4,8 @@ - - #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) - #define do_extend_cmdline 1 -+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+#define do_extend_cmdline 1 - #else - #define do_extend_cmdline 0 - #endif -@@ -67,6 +69,65 @@ static uint32_t get_cell_size(const void - return cell_size; - } - -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ -+static char *append_rootblock(char *dest, const char *str, int len, void *fdt) -+{ -+ char *ptr, *end; -+ char *root="root="; -+ int i, l; -+ const char *rootblock; -+ -+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually -+ ptr = str - 1; -+ -+ do { -+ //first find an 'r' at the begining or after a space -+ do { -+ ptr++; -+ ptr = strchr(ptr, 'r'); -+ if(!ptr) return dest; -+ -+ } while (ptr != str && *(ptr-1) != ' '); -+ -+ //then check for the rest -+ for(i = 1; i <= 4; i++) -+ if(*(ptr+i) != *(root+i)) break; -+ -+ } while (i != 5); -+ -+ end = strchr(ptr, ' '); -+ end = end ? (end - 1) : (strchr(ptr, 0) - 1); -+ -+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX ) -+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++); -+ ptr = end + 1; -+ -+ /* if append-rootblock property is set use it to append to command line */ -+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l); -+ if(rootblock != NULL) { -+ if(*dest != ' ') { -+ *dest = ' '; -+ dest++; -+ len++; -+ } -+ if (len + l + i <= COMMAND_LINE_SIZE) { -+ memcpy(dest, rootblock, l); -+ dest += l - 1; -+ memcpy(dest, ptr, i); -+ dest += i; -+ } -+ } else { -+ len = strlen(str); -+ if (len + 1 < COMMAND_LINE_SIZE) { -+ memcpy(dest, str, len); -+ dest += len; -+ } -+ } -+ return dest; -+} -+#endif -+ - static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) - { - char cmdline[COMMAND_LINE_SIZE]; -@@ -86,12 +147,21 @@ static void merge_fdt_bootargs(void *fdt - - /* and append the ATAG_CMDLINE */ - if (fdt_cmdline) { -+ -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ //save original bootloader args -+ //and append ubi.mtd with root partition number to current cmdline -+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline); -+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt); -+ -+#else - len = strlen(fdt_cmdline); - if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { - *ptr++ = ' '; - memcpy(ptr, fdt_cmdline, len); - ptr += len; - } -+#endif - } - *ptr = '\0'; - -@@ -148,7 +218,9 @@ int atags_to_fdt(void *atag_list, void * - else - setprop_string(fdt, "/chosen", "bootargs", - atag->u.cmdline.cmdline); -- } else if (atag->hdr.tag == ATAG_MEM) { -+ } -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE -+ else if (atag->hdr.tag == ATAG_MEM) { - if (memcount >= sizeof(mem_reg_property)/4) - continue; - if (!atag->u.mem.size) -@@ -187,6 +259,10 @@ int atags_to_fdt(void *atag_list, void * - setprop(fdt, "/memory", "reg", mem_reg_property, - 4 * memcount * memsize); - } -+#else -+ -+ } -+#endif - - return fdt_pack(fdt); - } ---- a/init/main.c -+++ b/init/main.c -@@ -95,6 +95,10 @@ - #include <asm/sections.h> - #include <asm/cacheflush.h> - -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+#include <linux/of.h> -+#endif -+ - static int kernel_init(void *); - - extern void init_IRQ(void); -@@ -573,6 +577,18 @@ asmlinkage __visible void __init start_k - page_alloc_init(); - - pr_notice("Kernel command line: %s\n", boot_command_line); -+ -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ //Show bootloader's original command line for reference -+ if(of_chosen) { -+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL); -+ if(prop) -+ pr_notice("Bootloader command line (ignored): %s\n", prop); -+ else -+ pr_notice("Bootloader command line not present\n"); -+ } -+#endif -+ - /* parameters may set static keys */ - jump_label_init(); - parse_early_param(); diff --git a/target/linux/mvebu/patches-4.14/100-find_active_root.patch b/target/linux/mvebu/patches-4.14/100-find_active_root.patch deleted file mode 100644 index f52a5108b8..0000000000 --- a/target/linux/mvebu/patches-4.14/100-find_active_root.patch +++ /dev/null @@ -1,60 +0,0 @@ -The WRT1900AC among other Linksys routers uses a dual-firmware layout. -Dynamically rename the active partition to "ubi". - -Signed-off-by: Imre Kaloz <kaloz@openwrt.org> - ---- a/drivers/mtd/ofpart.c -+++ b/drivers/mtd/ofpart.c -@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d - return of_get_property(pp, "compatible", NULL); - } - -+static int mangled_rootblock; -+ - static int parse_fixed_partitions(struct mtd_info *master, - const struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -@@ -33,6 +35,7 @@ static int parse_fixed_partitions(struct - struct device_node *mtd_node; - struct device_node *ofpart_node; - const char *partname; -+ const char *owrtpart = "ubi"; - struct device_node *pp; - int nr_parts, i, ret = 0; - bool dedicated = true; -@@ -110,9 +113,13 @@ static int parse_fixed_partitions(struct - parts[i].size = of_read_number(reg + a_cells, s_cells); - parts[i].of_node = pp; - -- partname = of_get_property(pp, "label", &len); -- if (!partname) -- partname = of_get_property(pp, "name", &len); -+ if (mangled_rootblock && (i == mangled_rootblock)) { -+ partname = owrtpart; -+ } else { -+ partname = of_get_property(pp, "label", &len); -+ if (!partname) -+ partname = of_get_property(pp, "name", &len); -+ } - parts[i].name = partname; - - if (of_get_property(pp, "read-only", &len)) -@@ -219,6 +226,18 @@ static int __init ofpart_parser_init(voi - return 0; - } - -+static int __init active_root(char *str) -+{ -+ get_option(&str, &mangled_rootblock); -+ -+ if (!mangled_rootblock) -+ return 1; -+ -+ return 1; -+} -+ -+__setup("mangled_rootblock=", active_root); -+ - static void __exit ofpart_parser_exit(void) - { - deregister_mtd_parser(&ofpart_parser); diff --git a/target/linux/mvebu/patches-4.14/102-revert_i2c_delay.patch b/target/linux/mvebu/patches-4.14/102-revert_i2c_delay.patch deleted file mode 100644 index 77583ac0b5..0000000000 --- a/target/linux/mvebu/patches-4.14/102-revert_i2c_delay.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -274,12 +274,10 @@ - }; - - &i2c0 { -- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11000 0x100>; - }; - - &i2c1 { -- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11100 0x100>; - }; - diff --git a/target/linux/mvebu/patches-4.14/103-remove-nand-driver-bug.patch b/target/linux/mvebu/patches-4.14/103-remove-nand-driver-bug.patch deleted file mode 100644 index 19a2a1e276..0000000000 --- a/target/linux/mvebu/patches-4.14/103-remove-nand-driver-bug.patch +++ /dev/null @@ -1,13 +0,0 @@ -Remove a BUG() call that would crash on a race condition that should -otherwise be harmless. - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -727,7 +727,6 @@ static void handle_data_pio(struct pxa3x - default: - dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__, - info->state); -- BUG(); - } - - /* Update buffer pointers for multi-page read/write */ diff --git a/target/linux/mvebu/patches-4.14/104-linksys_mamba_disable_keep_config.patch b/target/linux/mvebu/patches-4.14/104-linksys_mamba_disable_keep_config.patch deleted file mode 100644 index f6c7239ab2..0000000000 --- a/target/linux/mvebu/patches-4.14/104-linksys_mamba_disable_keep_config.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -200,7 +200,6 @@ - nand@d0000 { - status = "okay"; - num-cs = <1>; -- marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <4>; diff --git a/target/linux/mvebu/patches-4.14/110-pxa3xxx_revert_irq_thread.patch b/target/linux/mvebu/patches-4.14/110-pxa3xxx_revert_irq_thread.patch deleted file mode 100644 index 223ee652d8..0000000000 --- a/target/linux/mvebu/patches-4.14/110-pxa3xxx_revert_irq_thread.patch +++ /dev/null @@ -1,69 +0,0 @@ -Revert "mtd: pxa3xx-nand: handle PIO in threaded interrupt" - -This reverts commit 24542257a3b987025d4b998ec2d15e556c98ad3f -This upstream change has been causing spurious timeouts on accesses -to the NAND flash if something else on the system is causing -significant latency. - -Nothing guarantees that the thread will run in time, so the -usual timeout is unreliable. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -791,24 +791,11 @@ static void start_data_dma(struct pxa3xx - __func__, direction, info->dma_cookie, info->sg.length); - } - --static irqreturn_t pxa3xx_nand_irq_thread(int irq, void *data) --{ -- struct pxa3xx_nand_info *info = data; -- -- handle_data_pio(info); -- -- info->state = STATE_CMD_DONE; -- nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ); -- -- return IRQ_HANDLED; --} -- - static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) - { - struct pxa3xx_nand_info *info = devid; - unsigned int status, is_completed = 0, is_ready = 0; - unsigned int ready, cmd_done; -- irqreturn_t ret = IRQ_HANDLED; - - if (info->cs == 0) { - ready = NDSR_FLASH_RDY; -@@ -850,8 +837,7 @@ static irqreturn_t pxa3xx_nand_irq(int i - } else { - info->state = (status & NDSR_RDDREQ) ? - STATE_PIO_READING : STATE_PIO_WRITING; -- ret = IRQ_WAKE_THREAD; -- goto NORMAL_IRQ_EXIT; -+ handle_data_pio(info); - } - } - if (status & cmd_done) { -@@ -896,7 +882,7 @@ static irqreturn_t pxa3xx_nand_irq(int i - if (is_ready) - complete(&info->dev_ready); - NORMAL_IRQ_EXIT: -- return ret; -+ return IRQ_HANDLED; - } - - static inline int is_buf_blank(uint8_t *buf, size_t len) -@@ -1865,9 +1851,7 @@ static int alloc_nand_resource(struct pl - /* initialize all interrupts to be disabled */ - disable_int(info, NDSR_MASK); - -- ret = request_threaded_irq(irq, pxa3xx_nand_irq, -- pxa3xx_nand_irq_thread, IRQF_ONESHOT, -- pdev->name, info); -+ ret = request_irq(irq, pxa3xx_nand_irq, 0, pdev->name, info); - if (ret < 0) { - dev_err(&pdev->dev, "failed to request IRQ: %d\n", ret); - goto fail_free_buf; diff --git a/target/linux/mvebu/patches-4.14/205-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-4.14/205-armada-385-rd-mtd-partitions.patch deleted file mode 100644 index e75a5eebda..0000000000 --- a/target/linux/mvebu/patches-4.14/205-armada-385-rd-mtd-partitions.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/arm/boot/dts/armada-388-rd.dts -+++ b/arch/arm/boot/dts/armada-388-rd.dts -@@ -140,6 +140,16 @@ - compatible = "st,m25p128", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0 0x400000>; -+ }; -+ -+ partition@1 { -+ label = "firmware"; -+ reg = <0x400000 0xc00000>; -+ }; - }; - }; - diff --git a/target/linux/mvebu/patches-4.14/206-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-4.14/206-ARM-mvebu-385-ap-Add-partitions.patch deleted file mode 100644 index b7af272360..0000000000 --- a/target/linux/mvebu/patches-4.14/206-ARM-mvebu-385-ap-Add-partitions.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime.ripard@free-electrons.com> -Date: Tue, 13 Jan 2015 11:14:09 +0100 -Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions - -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> ---- - arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - ---- a/arch/arm/boot/dts/armada-385-db-ap.dts -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts -@@ -181,19 +181,19 @@ - #size-cells = <1>; - - partition@0 { -- label = "U-Boot"; -+ label = "u-boot"; - reg = <0x00000000 0x00800000>; - read-only; - }; - - partition@800000 { -- label = "uImage"; -+ label = "kernel"; - reg = <0x00800000 0x00400000>; - read-only; - }; - - partition@c00000 { -- label = "Root"; -+ label = "ubi"; - reg = <0x00c00000 0x3f400000>; - }; - }; diff --git a/target/linux/mvebu/patches-4.14/210-clearfog_switch_node.patch b/target/linux/mvebu/patches-4.14/210-clearfog_switch_node.patch deleted file mode 100644 index e880cc13e7..0000000000 --- a/target/linux/mvebu/patches-4.14/210-clearfog_switch_node.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/arm/boot/dts/armada-388-clearfog.dts -+++ b/arch/arm/boot/dts/armada-388-clearfog.dts -@@ -129,6 +129,18 @@ - }; - }; - -+ mvsw61xx { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "marvell,88e6176"; -+ status = "okay"; -+ reg = <0x4>; -+ is-indirect; -+ -+ mii-bus = <&mdio>; -+ cpu-port-0 = <5>; -+ }; -+ - gpio-keys { - compatible = "gpio-keys"; - pinctrl-0 = <&rear_button_pins>; diff --git a/target/linux/mvebu/patches-4.14/220-disable-untested-dsa-boards.patch b/target/linux/mvebu/patches-4.14/220-disable-untested-dsa-boards.patch deleted file mode 100644 index 5df94bdfad..0000000000 --- a/target/linux/mvebu/patches-4.14/220-disable-untested-dsa-boards.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi -@@ -196,6 +196,7 @@ - status = "okay"; - - switch@0 { -+ status = "disabled"; - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; ---- a/arch/arm/boot/dts/armada-388-clearfog.dts -+++ b/arch/arm/boot/dts/armada-388-clearfog.dts -@@ -202,6 +202,7 @@ - status = "okay"; - - switch@4 { -+ status = "disabled"; - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -516,6 +516,7 @@ - status = "okay"; - - switch@0 { -+ status = "disabled"; - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; diff --git a/target/linux/mvebu/patches-4.14/230-armada-xp-linksys-mamba-broken-idle.patch b/target/linux/mvebu/patches-4.14/230-armada-xp-linksys-mamba-broken-idle.patch deleted file mode 100644 index e82a899a75..0000000000 --- a/target/linux/mvebu/patches-4.14/230-armada-xp-linksys-mamba-broken-idle.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -563,3 +563,7 @@ - }; - }; - }; -+ -+&coherencyfab { -+ broken-idle; -+}; diff --git a/target/linux/mvebu/patches-4.14/300-mvneta-tx-queue-workaround.patch b/target/linux/mvebu/patches-4.14/300-mvneta-tx-queue-workaround.patch deleted file mode 100644 index f21f8083ee..0000000000 --- a/target/linux/mvebu/patches-4.14/300-mvneta-tx-queue-workaround.patch +++ /dev/null @@ -1,35 +0,0 @@ -The hardware queue scheduling is apparently configured with fixed -priorities, which creates a nasty fairness issue where traffic from one -CPU can starve traffic from all other CPUs. - -Work around this issue by forcing all tx packets to go through one CPU, -until this issue is fixed properly. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -3961,6 +3961,15 @@ static int mvneta_ethtool_set_wol(struct - return ret; - } - -+static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb, -+ void *accel_priv, -+ select_queue_fallback_t fallback) -+{ -+ /* XXX: hardware queue scheduling is broken, -+ * use only one queue until it is fixed */ -+ return 0; -+} -+ - static const struct net_device_ops mvneta_netdev_ops = { - .ndo_open = mvneta_open, - .ndo_stop = mvneta_stop, -@@ -3971,6 +3980,7 @@ static const struct net_device_ops mvnet - .ndo_fix_features = mvneta_fix_features, - .ndo_get_stats64 = mvneta_get_stats64, - .ndo_do_ioctl = mvneta_ioctl, -+ .ndo_select_queue = mvneta_select_queue, - }; - - static const struct ethtool_ops mvneta_eth_tool_ops = { diff --git a/target/linux/mvebu/patches-4.14/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch b/target/linux/mvebu/patches-4.14/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch deleted file mode 100644 index 29f36be460..0000000000 --- a/target/linux/mvebu/patches-4.14/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch +++ /dev/null @@ -1,40 +0,0 @@ -From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@arm.linux.org.uk> -Date: Sat, 3 Oct 2015 09:13:05 +0100 -Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states - -The cpuidle ->enter method expects the return value to be the sleep -state we entered. Returning negative numbers or other codes is not -permissible since coupled CPU idle was merged. - -At least some of the mvebu_v7_cpu_suspend() implementations return the -value from cpu_suspend(), which returns zero if the CPU vectors back -into the kernel via cpu_resume() (the success case), or the non-zero -return value of the suspend actor, or one (failure cases). - -We do not want to be returning the failure case value back to CPU idle -as that indicates that we successfully entered one of the deeper idle -states. Always return zero instead, indicating that we slept for the -shortest amount of time. - -Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> ---- - drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - ---- a/drivers/cpuidle/cpuidle-mvebu-v7.c -+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c -@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp - ret = mvebu_v7_cpu_suspend(deepidle); - cpu_pm_exit(); - -+ /* -+ * If we failed to enter the desired state, indicate that we -+ * slept lightly. -+ */ - if (ret) -- return ret; -+ return 0; - - return index; - } diff --git a/target/linux/mvebu/patches-4.14/401-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-4.14/401-pci-mvebu-time-out-reset-on-link-up.patch deleted file mode 100644 index 504d110264..0000000000 --- a/target/linux/mvebu/patches-4.14/401-pci-mvebu-time-out-reset-on-link-up.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@armlinux.org.uk> -Date: Sat, 9 Jul 2016 10:58:16 +0100 -Subject: pci: mvebu: time out reset on link up - -If the port reports that the link is up while we are resetting, there's -little point in waiting for the full duration. - -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> ---- - drivers/pci/host/pci-mvebu.c | 20 ++++++++++++++------ - 1 file changed, 14 insertions(+), 6 deletions(-) - ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -1167,6 +1167,7 @@ static int mvebu_pcie_powerup(struct mve - - if (port->reset_gpio) { - u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; -+ unsigned int i; - - of_property_read_u32(port->dn, "reset-delay-us", - &reset_udelay); -@@ -1174,7 +1175,13 @@ static int mvebu_pcie_powerup(struct mve - udelay(100); - - gpiod_set_value_cansleep(port->reset_gpio, 0); -- msleep(reset_udelay / 1000); -+ for (i = 0; i < reset_udelay; i += 1000) { -+ if (mvebu_pcie_link_up(port)) -+ break; -+ msleep(1); -+ } -+ -+ printk("%s: reset completed in %dus\n", port->name, i); - } - - return 0; -@@ -1261,15 +1268,16 @@ static int mvebu_pcie_probe(struct platf - if (!child) - continue; - -- ret = mvebu_pcie_powerup(port); -- if (ret < 0) -- continue; -- - port->base = mvebu_pcie_map_registers(pdev, child, port); - if (IS_ERR(port->base)) { - dev_err(dev, "%s: cannot map registers\n", port->name); - port->base = NULL; -- mvebu_pcie_powerdown(port); -+ continue; -+ } -+ -+ ret = mvebu_pcie_powerup(port); -+ if (ret < 0) { -+ port->base = NULL; - continue; - } - diff --git a/target/linux/mvebu/patches-4.14/402-sfp-display-SFP-module-information.patch b/target/linux/mvebu/patches-4.14/402-sfp-display-SFP-module-information.patch deleted file mode 100644 index c531c375a0..0000000000 --- a/target/linux/mvebu/patches-4.14/402-sfp-display-SFP-module-information.patch +++ /dev/null @@ -1,290 +0,0 @@ -From e76632d118659347d9261a4470d9f60bfbe0044c Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@arm.linux.org.uk> -Date: Sun, 13 Sep 2015 01:06:31 +0100 -Subject: sfp: display SFP module information - -Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> ---- - drivers/net/phy/sfp.c | 254 +++++++++++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 253 insertions(+), 1 deletion(-) - ---- a/drivers/net/phy/sfp.c -+++ b/drivers/net/phy/sfp.c -@@ -265,6 +265,184 @@ static unsigned int sfp_check(void *buf, - return check; - } - -+static const char *sfp_link_len(char *buf, size_t size, unsigned int length, -+ unsigned int multiplier) -+{ -+ if (length == 0) -+ return "unsupported/unspecified"; -+ -+ if (length == 255) { -+ *buf++ = '>'; -+ size -= 1; -+ length -= 1; -+ } -+ -+ length *= multiplier; -+ -+ if (length >= 1000) -+ snprintf(buf, size, "%u.%0*ukm", -+ length / 1000, -+ multiplier > 100 ? 1 : -+ multiplier > 10 ? 2 : 3, -+ length % 1000); -+ else -+ snprintf(buf, size, "%um", length); -+ -+ return buf; -+} -+ -+struct bitfield { -+ unsigned int mask; -+ unsigned int val; -+ const char *str; -+}; -+ -+static const struct bitfield sfp_options[] = { -+ { -+ .mask = SFP_OPTIONS_HIGH_POWER_LEVEL, -+ .val = SFP_OPTIONS_HIGH_POWER_LEVEL, -+ .str = "hpl", -+ }, { -+ .mask = SFP_OPTIONS_PAGING_A2, -+ .val = SFP_OPTIONS_PAGING_A2, -+ .str = "paginga2", -+ }, { -+ .mask = SFP_OPTIONS_RETIMER, -+ .val = SFP_OPTIONS_RETIMER, -+ .str = "retimer", -+ }, { -+ .mask = SFP_OPTIONS_COOLED_XCVR, -+ .val = SFP_OPTIONS_COOLED_XCVR, -+ .str = "cooled", -+ }, { -+ .mask = SFP_OPTIONS_POWER_DECL, -+ .val = SFP_OPTIONS_POWER_DECL, -+ .str = "powerdecl", -+ }, { -+ .mask = SFP_OPTIONS_RX_LINEAR_OUT, -+ .val = SFP_OPTIONS_RX_LINEAR_OUT, -+ .str = "rxlinear", -+ }, { -+ .mask = SFP_OPTIONS_RX_DECISION_THRESH, -+ .val = SFP_OPTIONS_RX_DECISION_THRESH, -+ .str = "rxthresh", -+ }, { -+ .mask = SFP_OPTIONS_TUNABLE_TX, -+ .val = SFP_OPTIONS_TUNABLE_TX, -+ .str = "tunabletx", -+ }, { -+ .mask = SFP_OPTIONS_RATE_SELECT, -+ .val = SFP_OPTIONS_RATE_SELECT, -+ .str = "ratesel", -+ }, { -+ .mask = SFP_OPTIONS_TX_DISABLE, -+ .val = SFP_OPTIONS_TX_DISABLE, -+ .str = "txdisable", -+ }, { -+ .mask = SFP_OPTIONS_TX_FAULT, -+ .val = SFP_OPTIONS_TX_FAULT, -+ .str = "txfault", -+ }, { -+ .mask = SFP_OPTIONS_LOS_INVERTED, -+ .val = SFP_OPTIONS_LOS_INVERTED, -+ .str = "los-", -+ }, { -+ .mask = SFP_OPTIONS_LOS_NORMAL, -+ .val = SFP_OPTIONS_LOS_NORMAL, -+ .str = "los+", -+ }, { } -+}; -+ -+static const struct bitfield diagmon[] = { -+ { -+ .mask = SFP_DIAGMON_DDM, -+ .val = SFP_DIAGMON_DDM, -+ .str = "ddm", -+ }, { -+ .mask = SFP_DIAGMON_INT_CAL, -+ .val = SFP_DIAGMON_INT_CAL, -+ .str = "intcal", -+ }, { -+ .mask = SFP_DIAGMON_EXT_CAL, -+ .val = SFP_DIAGMON_EXT_CAL, -+ .str = "extcal", -+ }, { -+ .mask = SFP_DIAGMON_RXPWR_AVG, -+ .val = SFP_DIAGMON_RXPWR_AVG, -+ .str = "rxpwravg", -+ }, { } -+}; -+ -+static const char *sfp_bitfield(char *out, size_t outsz, const struct bitfield *bits, unsigned int val) -+{ -+ char *p = out; -+ int n; -+ -+ *p = '\0'; -+ while (bits->mask) { -+ if ((val & bits->mask) == bits->val) { -+ n = snprintf(p, outsz, "%s%s", -+ out != p ? ", " : "", -+ bits->str); -+ if (n == outsz) -+ break; -+ p += n; -+ outsz -= n; -+ } -+ bits++; -+ } -+ -+ return out; -+} -+ -+static const char *sfp_connector(unsigned int connector) -+{ -+ switch (connector) { -+ case SFP_CONNECTOR_UNSPEC: -+ return "unknown/unspecified"; -+ case SFP_CONNECTOR_SC: -+ return "SC"; -+ case SFP_CONNECTOR_FIBERJACK: -+ return "Fiberjack"; -+ case SFP_CONNECTOR_LC: -+ return "LC"; -+ case SFP_CONNECTOR_MT_RJ: -+ return "MT-RJ"; -+ case SFP_CONNECTOR_MU: -+ return "MU"; -+ case SFP_CONNECTOR_SG: -+ return "SG"; -+ case SFP_CONNECTOR_OPTICAL_PIGTAIL: -+ return "Optical pigtail"; -+ case SFP_CONNECTOR_HSSDC_II: -+ return "HSSDC II"; -+ case SFP_CONNECTOR_COPPER_PIGTAIL: -+ return "Copper pigtail"; -+ default: -+ return "unknown"; -+ } -+} -+ -+static const char *sfp_encoding(unsigned int encoding) -+{ -+ switch (encoding) { -+ case SFP_ENCODING_UNSPEC: -+ return "unspecified"; -+ case SFP_ENCODING_8472_64B66B: -+ return "64b66b"; -+ case SFP_ENCODING_8B10B: -+ return "8b10b"; -+ case SFP_ENCODING_4B5B: -+ return "4b5b"; -+ case SFP_ENCODING_NRZ: -+ return "NRZ"; -+ case SFP_ENCODING_8472_MANCHESTER: -+ return "MANCHESTER"; -+ default: -+ return "unknown"; -+ } -+} -+ - /* Helpers */ - static void sfp_module_tx_disable(struct sfp *sfp) - { -@@ -433,6 +611,7 @@ static int sfp_sm_mod_probe(struct sfp * - char sn[17]; - char date[9]; - char rev[5]; -+ char options[80]; - u8 check; - int err; - -@@ -476,10 +655,83 @@ static int sfp_sm_mod_probe(struct sfp * - rev[4] = '\0'; - memcpy(sn, sfp->id.ext.vendor_sn, 16); - sn[16] = '\0'; -- memcpy(date, sfp->id.ext.datecode, 8); -+ date[0] = sfp->id.ext.datecode[4]; -+ date[1] = sfp->id.ext.datecode[5]; -+ date[2] = '-'; -+ date[3] = sfp->id.ext.datecode[2]; -+ date[4] = sfp->id.ext.datecode[3]; -+ date[5] = '-'; -+ date[6] = sfp->id.ext.datecode[0]; -+ date[7] = sfp->id.ext.datecode[1]; - date[8] = '\0'; - - dev_info(sfp->dev, "module %s %s rev %s sn %s dc %s\n", vendor, part, rev, sn, date); -+ dev_info(sfp->dev, " %s connector, encoding %s, nominal bitrate %u.%uGbps +%u%% -%u%%\n", -+ sfp_connector(sfp->id.base.connector), -+ sfp_encoding(sfp->id.base.encoding), -+ sfp->id.base.br_nominal / 10, -+ sfp->id.base.br_nominal % 10, -+ sfp->id.ext.br_max, sfp->id.ext.br_min); -+ dev_info(sfp->dev, " 1000BaseSX%c 1000BaseLX%c 1000BaseCX%c 1000BaseT%c 100BaseTLX%c 1000BaseFX%c BaseBX10%c BasePX%c\n", -+ sfp->id.base.e1000_base_sx ? '+' : '-', -+ sfp->id.base.e1000_base_lx ? '+' : '-', -+ sfp->id.base.e1000_base_cx ? '+' : '-', -+ sfp->id.base.e1000_base_t ? '+' : '-', -+ sfp->id.base.e100_base_lx ? '+' : '-', -+ sfp->id.base.e100_base_fx ? '+' : '-', -+ sfp->id.base.e_base_bx10 ? '+' : '-', -+ sfp->id.base.e_base_px ? '+' : '-'); -+ dev_info(sfp->dev, " 10GBaseSR%c 10GBaseLR%c 10GBaseLRM%c 10GBaseER%c\n", -+ sfp->id.base.e10g_base_sr ? '+' : '-', -+ sfp->id.base.e10g_base_lr ? '+' : '-', -+ sfp->id.base.e10g_base_lrm ? '+' : '-', -+ sfp->id.base.e10g_base_er ? '+' : '-'); -+ -+ if (!sfp->id.base.sfp_ct_passive && !sfp->id.base.sfp_ct_active && -+ !sfp->id.base.e1000_base_t) { -+ char len_9um[16], len_om[16]; -+ -+ dev_info(sfp->dev, " Wavelength %unm, fiber lengths:\n", -+ be16_to_cpup(&sfp->id.base.optical_wavelength)); -+ -+ if (sfp->id.base.link_len[0] == 255) -+ strcpy(len_9um, ">254km"); -+ else if (sfp->id.base.link_len[1] && sfp->id.base.link_len[1] != 255) -+ sprintf(len_9um, "%um", -+ sfp->id.base.link_len[1] * 100); -+ else if (sfp->id.base.link_len[0]) -+ sprintf(len_9um, "%ukm", sfp->id.base.link_len[0]); -+ else if (sfp->id.base.link_len[1] == 255) -+ strcpy(len_9um, ">25.4km"); -+ else -+ strcpy(len_9um, "unsupported"); -+ -+ dev_info(sfp->dev, " 9µm SM : %s\n", len_9um); -+ dev_info(sfp->dev, " 62.5µm MM OM1: %s\n", -+ sfp_link_len(len_om, sizeof(len_om), -+ sfp->id.base.link_len[3], 10)); -+ dev_info(sfp->dev, " 50µm MM OM2: %s\n", -+ sfp_link_len(len_om, sizeof(len_om), -+ sfp->id.base.link_len[2], 10)); -+ dev_info(sfp->dev, " 50µm MM OM3: %s\n", -+ sfp_link_len(len_om, sizeof(len_om), -+ sfp->id.base.link_len[5], 10)); -+ dev_info(sfp->dev, " 50µm MM OM4: %s\n", -+ sfp_link_len(len_om, sizeof(len_om), -+ sfp->id.base.link_len[4], 10)); -+ } else { -+ char len[16]; -+ dev_info(sfp->dev, " Copper length: %s\n", -+ sfp_link_len(len, sizeof(len), -+ sfp->id.base.link_len[4], 1)); -+ } -+ -+ dev_info(sfp->dev, " Options: %s\n", -+ sfp_bitfield(options, sizeof(options), sfp_options, -+ be16_to_cpu(sfp->id.ext.options))); -+ dev_info(sfp->dev, " Diagnostics: %s\n", -+ sfp_bitfield(options, sizeof(options), diagmon, -+ sfp->id.ext.diagmon)); - - /* We only support SFP modules, not the legacy GBIC modules. */ - if (sfp->id.base.phys_id != SFP_PHYS_ID_SFP || diff --git a/target/linux/mvebu/patches-4.14/403-net-mvneta-convert-to-phylink.patch b/target/linux/mvebu/patches-4.14/403-net-mvneta-convert-to-phylink.patch deleted file mode 100644 index 34a2d342db..0000000000 --- a/target/linux/mvebu/patches-4.14/403-net-mvneta-convert-to-phylink.patch +++ /dev/null @@ -1,979 +0,0 @@ -From 36f29e6cf8071fed3854d9825217ed2a3c83b990 Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@arm.linux.org.uk> -Date: Wed, 16 Sep 2015 21:27:10 +0100 -Subject: net: mvneta: convert to phylink - -Convert mvneta to use phylink, which models the MAC to PHY link in -a generic, reusable form. - -Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> - -- remove unused sync status ---- - drivers/net/ethernet/marvell/Kconfig | 2 +- - drivers/net/ethernet/marvell/mvneta.c | 594 ++++++++++++++++++++-------------- - 2 files changed, 349 insertions(+), 247 deletions(-) - ---- a/drivers/net/ethernet/marvell/Kconfig -+++ b/drivers/net/ethernet/marvell/Kconfig -@@ -60,7 +60,7 @@ config MVNETA - depends on ARCH_MVEBU || COMPILE_TEST - depends on HAS_DMA - select MVMDIO -- select FIXED_PHY -+ select PHYLINK - ---help--- - This driver supports the network interface units in the - Marvell ARMADA XP, ARMADA 370, ARMADA 38x and ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -28,7 +28,7 @@ - #include <linux/of_mdio.h> - #include <linux/of_net.h> - #include <linux/phy.h> --#include <linux/phy_fixed.h> -+#include <linux/phylink.h> - #include <linux/platform_device.h> - #include <linux/skbuff.h> - #include <net/hwbm.h> -@@ -189,6 +189,7 @@ - #define MVNETA_GMAC_CTRL_0 0x2c00 - #define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2 - #define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc -+#define MVNETA_GMAC0_PORT_1000BASE_X BIT(1) - #define MVNETA_GMAC0_PORT_ENABLE BIT(0) - #define MVNETA_GMAC_CTRL_2 0x2c08 - #define MVNETA_GMAC2_INBAND_AN_ENABLE BIT(0) -@@ -204,13 +205,19 @@ - #define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5) - #define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6) - #define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7) -+#define MVNETA_GMAC_AN_COMPLETE BIT(11) -+#define MVNETA_GMAC_SYNC_OK BIT(14) - #define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c - #define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0) - #define MVNETA_GMAC_FORCE_LINK_PASS BIT(1) - #define MVNETA_GMAC_INBAND_AN_ENABLE BIT(2) -+#define MVNETA_GMAC_AN_BYPASS_ENABLE BIT(3) -+#define MVNETA_GMAC_INBAND_RESTART_AN BIT(4) - #define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5) - #define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6) - #define MVNETA_GMAC_AN_SPEED_EN BIT(7) -+#define MVNETA_GMAC_CONFIG_FLOW_CTRL BIT(8) -+#define MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL BIT(9) - #define MVNETA_GMAC_AN_FLOW_CTRL_EN BIT(11) - #define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12) - #define MVNETA_GMAC_AN_DUPLEX_EN BIT(13) -@@ -237,6 +244,12 @@ - #define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2)) - #define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff - -+#define MVNETA_LPI_CTRL_0 0x2cc0 -+#define MVNETA_LPI_CTRL_1 0x2cc4 -+#define MVNETA_LPI_REQUEST_ENABLE BIT(0) -+#define MVNETA_LPI_CTRL_2 0x2cc8 -+#define MVNETA_LPI_STATUS 0x2ccc -+ - #define MVNETA_CAUSE_TXQ_SENT_DESC_ALL_MASK 0xff - - /* Descriptor ring Macros */ -@@ -313,6 +326,11 @@ - #define MVNETA_RX_GET_BM_POOL_ID(rxd) \ - (((rxd)->status & MVNETA_RXD_BM_POOL_MASK) >> MVNETA_RXD_BM_POOL_SHIFT) - -+enum { -+ ETHTOOL_STAT_EEE_WAKEUP, -+ ETHTOOL_MAX_STATS, -+}; -+ - struct mvneta_statistic { - unsigned short offset; - unsigned short type; -@@ -321,6 +339,7 @@ struct mvneta_statistic { - - #define T_REG_32 32 - #define T_REG_64 64 -+#define T_SW 1 - - static const struct mvneta_statistic mvneta_statistics[] = { - { 0x3000, T_REG_64, "good_octets_received", }, -@@ -355,6 +374,7 @@ static const struct mvneta_statistic mvn - { 0x304c, T_REG_32, "broadcast_frames_sent", }, - { 0x3054, T_REG_32, "fc_sent", }, - { 0x300c, T_REG_32, "internal_mac_transmit_err", }, -+ { ETHTOOL_STAT_EEE_WAKEUP, T_SW, "eee_wakeup_errors", }, - }; - - struct mvneta_pcpu_stats { -@@ -407,20 +427,19 @@ struct mvneta_port { - u16 tx_ring_size; - u16 rx_ring_size; - -- struct mii_bus *mii_bus; -- phy_interface_t phy_interface; -- struct device_node *phy_node; -- unsigned int link; -- unsigned int duplex; -- unsigned int speed; -+ struct device_node *dn; - unsigned int tx_csum_limit; -- unsigned int use_inband_status:1; -+ struct phylink *phylink; - - struct mvneta_bm *bm_priv; - struct mvneta_bm_pool *pool_long; - struct mvneta_bm_pool *pool_short; - int bm_win_id; - -+ bool eee_enabled; -+ bool eee_active; -+ bool tx_lpi_enabled; -+ - u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)]; - - u32 indir[MVNETA_RSS_LU_TABLE_SIZE]; -@@ -1215,10 +1234,6 @@ static void mvneta_port_disable(struct m - val &= ~MVNETA_GMAC0_PORT_ENABLE; - mvreg_write(pp, MVNETA_GMAC_CTRL_0, val); - -- pp->link = 0; -- pp->duplex = -1; -- pp->speed = 0; -- - udelay(200); - } - -@@ -1278,44 +1293,6 @@ static void mvneta_set_other_mcast_table - mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val); - } - --static void mvneta_set_autoneg(struct mvneta_port *pp, int enable) --{ -- u32 val; -- -- if (enable) { -- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); -- val &= ~(MVNETA_GMAC_FORCE_LINK_PASS | -- MVNETA_GMAC_FORCE_LINK_DOWN | -- MVNETA_GMAC_AN_FLOW_CTRL_EN); -- val |= MVNETA_GMAC_INBAND_AN_ENABLE | -- MVNETA_GMAC_AN_SPEED_EN | -- MVNETA_GMAC_AN_DUPLEX_EN; -- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); -- -- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER); -- val |= MVNETA_GMAC_1MS_CLOCK_ENABLE; -- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val); -- -- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); -- val |= MVNETA_GMAC2_INBAND_AN_ENABLE; -- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); -- } else { -- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); -- val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE | -- MVNETA_GMAC_AN_SPEED_EN | -- MVNETA_GMAC_AN_DUPLEX_EN); -- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); -- -- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER); -- val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE; -- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val); -- -- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); -- val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE; -- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); -- } --} -- - static void mvneta_percpu_unmask_interrupt(void *arg) - { - struct mvneta_port *pp = arg; -@@ -1468,7 +1445,6 @@ static void mvneta_defaults_set(struct m - val &= ~MVNETA_PHY_POLLING_ENABLE; - mvreg_write(pp, MVNETA_UNIT_CONTROL, val); - -- mvneta_set_autoneg(pp, pp->use_inband_status); - mvneta_set_ucast_table(pp, -1); - mvneta_set_special_mcast_table(pp, -1); - mvneta_set_other_mcast_table(pp, -1); -@@ -2693,26 +2669,11 @@ static irqreturn_t mvneta_percpu_isr(int - return IRQ_HANDLED; - } - --static int mvneta_fixed_link_update(struct mvneta_port *pp, -- struct phy_device *phy) -+static void mvneta_link_change(struct mvneta_port *pp) - { -- struct fixed_phy_status status; -- struct fixed_phy_status changed = {}; - u32 gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS); - -- status.link = !!(gmac_stat & MVNETA_GMAC_LINK_UP); -- if (gmac_stat & MVNETA_GMAC_SPEED_1000) -- status.speed = SPEED_1000; -- else if (gmac_stat & MVNETA_GMAC_SPEED_100) -- status.speed = SPEED_100; -- else -- status.speed = SPEED_10; -- status.duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX); -- changed.link = 1; -- changed.speed = 1; -- changed.duplex = 1; -- fixed_phy_update_state(phy, &status, &changed); -- return 0; -+ phylink_mac_change(pp->phylink, !!(gmac_stat & MVNETA_GMAC_LINK_UP)); - } - - /* NAPI handler -@@ -2728,7 +2689,6 @@ static int mvneta_poll(struct napi_struc - u32 cause_rx_tx; - int rx_queue; - struct mvneta_port *pp = netdev_priv(napi->dev); -- struct net_device *ndev = pp->dev; - struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports); - - if (!netif_running(pp->dev)) { -@@ -2742,12 +2702,11 @@ static int mvneta_poll(struct napi_struc - u32 cause_misc = mvreg_read(pp, MVNETA_INTR_MISC_CAUSE); - - mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0); -- if (pp->use_inband_status && (cause_misc & -- (MVNETA_CAUSE_PHY_STATUS_CHANGE | -- MVNETA_CAUSE_LINK_CHANGE | -- MVNETA_CAUSE_PSC_SYNC_CHANGE))) { -- mvneta_fixed_link_update(pp, ndev->phydev); -- } -+ -+ if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE | -+ MVNETA_CAUSE_LINK_CHANGE | -+ MVNETA_CAUSE_PSC_SYNC_CHANGE)) -+ mvneta_link_change(pp); - } - - /* Release Tx descriptors */ -@@ -3061,7 +3020,6 @@ static int mvneta_setup_txqs(struct mvne - static void mvneta_start_dev(struct mvneta_port *pp) - { - int cpu; -- struct net_device *ndev = pp->dev; - - mvneta_max_rx_size_set(pp, pp->pkt_size); - mvneta_txq_max_tx_size_set(pp, pp->pkt_size); -@@ -3089,16 +3047,15 @@ static void mvneta_start_dev(struct mvne - MVNETA_CAUSE_LINK_CHANGE | - MVNETA_CAUSE_PSC_SYNC_CHANGE); - -- phy_start(ndev->phydev); -+ phylink_start(pp->phylink); - netif_tx_start_all_queues(pp->dev); - } - - static void mvneta_stop_dev(struct mvneta_port *pp) - { - unsigned int cpu; -- struct net_device *ndev = pp->dev; - -- phy_stop(ndev->phydev); -+ phylink_stop(pp->phylink); - - if (!pp->neta_armada3700) { - for_each_online_cpu(cpu) { -@@ -3251,103 +3208,232 @@ static int mvneta_set_mac_addr(struct ne - return 0; - } - --static void mvneta_adjust_link(struct net_device *ndev) -+static void mvneta_validate(struct net_device *ndev, unsigned long *supported, -+ struct phylink_link_state *state) -+{ -+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; -+ -+ /* Allow all the expected bits */ -+ phylink_set(mask, Autoneg); -+ phylink_set_port_modes(mask); -+ -+ /* Asymmetric pause is unsupported */ -+ phylink_set(mask, Pause); -+ /* Half-duplex at speeds higher than 100Mbit is unsupported */ -+ phylink_set(mask, 1000baseT_Full); -+ phylink_set(mask, 1000baseX_Full); -+ -+ if (state->interface != PHY_INTERFACE_MODE_1000BASEX) { -+ /* 10M and 100M are only supported in non-802.3z mode */ -+ phylink_set(mask, 10baseT_Half); -+ phylink_set(mask, 10baseT_Full); -+ phylink_set(mask, 100baseT_Half); -+ phylink_set(mask, 100baseT_Full); -+ } -+ -+ bitmap_and(supported, supported, mask, -+ __ETHTOOL_LINK_MODE_MASK_NBITS); -+ bitmap_and(state->advertising, state->advertising, mask, -+ __ETHTOOL_LINK_MODE_MASK_NBITS); -+} -+ -+static int mvneta_mac_link_state(struct net_device *ndev, -+ struct phylink_link_state *state) - { - struct mvneta_port *pp = netdev_priv(ndev); -- struct phy_device *phydev = ndev->phydev; -- int status_change = 0; -+ u32 gmac_stat; - -- if (phydev->link) { -- if ((pp->speed != phydev->speed) || -- (pp->duplex != phydev->duplex)) { -- u32 val; -- -- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); -- val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED | -- MVNETA_GMAC_CONFIG_GMII_SPEED | -- MVNETA_GMAC_CONFIG_FULL_DUPLEX); -- -- if (phydev->duplex) -- val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; -- -- if (phydev->speed == SPEED_1000) -- val |= MVNETA_GMAC_CONFIG_GMII_SPEED; -- else if (phydev->speed == SPEED_100) -- val |= MVNETA_GMAC_CONFIG_MII_SPEED; -+ gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS); - -- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); -+ if (gmac_stat & MVNETA_GMAC_SPEED_1000) -+ state->speed = SPEED_1000; -+ else if (gmac_stat & MVNETA_GMAC_SPEED_100) -+ state->speed = SPEED_100; -+ else -+ state->speed = SPEED_10; - -- pp->duplex = phydev->duplex; -- pp->speed = phydev->speed; -- } -+ state->an_complete = !!(gmac_stat & MVNETA_GMAC_AN_COMPLETE); -+ state->link = !!(gmac_stat & MVNETA_GMAC_LINK_UP); -+ state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX); -+ -+ state->pause = 0; -+ if (gmac_stat & MVNETA_GMAC_RX_FLOW_CTRL_ENABLE) -+ state->pause |= MLO_PAUSE_RX; -+ if (gmac_stat & MVNETA_GMAC_TX_FLOW_CTRL_ENABLE) -+ state->pause |= MLO_PAUSE_TX; -+ -+ return 1; -+} -+ -+static void mvneta_mac_an_restart(struct net_device *ndev) -+{ -+ struct mvneta_port *pp = netdev_priv(ndev); -+ u32 gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); -+ -+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, -+ gmac_an | MVNETA_GMAC_INBAND_RESTART_AN); -+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, -+ gmac_an & ~MVNETA_GMAC_INBAND_RESTART_AN); -+} -+ -+static void mvneta_mac_config(struct net_device *ndev, unsigned int mode, -+ const struct phylink_link_state *state) -+{ -+ struct mvneta_port *pp = netdev_priv(ndev); -+ u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0); -+ u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2); -+ u32 new_clk, gmac_clk = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER); -+ u32 new_an, gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); -+ -+ new_ctrl0 = gmac_ctrl0 & ~MVNETA_GMAC0_PORT_1000BASE_X; -+ new_ctrl2 = gmac_ctrl2 & ~MVNETA_GMAC2_INBAND_AN_ENABLE; -+ new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE; -+ new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE | -+ MVNETA_GMAC_INBAND_RESTART_AN | -+ MVNETA_GMAC_CONFIG_MII_SPEED | -+ MVNETA_GMAC_CONFIG_GMII_SPEED | -+ MVNETA_GMAC_AN_SPEED_EN | -+ MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL | -+ MVNETA_GMAC_CONFIG_FLOW_CTRL | -+ MVNETA_GMAC_AN_FLOW_CTRL_EN | -+ MVNETA_GMAC_CONFIG_FULL_DUPLEX | -+ MVNETA_GMAC_AN_DUPLEX_EN); -+ -+ if (phylink_test(state->advertising, Pause)) -+ new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL; -+ if (state->pause & MLO_PAUSE_TXRX_MASK) -+ new_an |= MVNETA_GMAC_CONFIG_FLOW_CTRL; -+ -+ if (!phylink_autoneg_inband(mode)) { -+ /* Phy or fixed speed */ -+ if (state->duplex) -+ new_an |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; -+ -+ if (state->speed == SPEED_1000) -+ new_an |= MVNETA_GMAC_CONFIG_GMII_SPEED; -+ else if (state->speed == SPEED_100) -+ new_an |= MVNETA_GMAC_CONFIG_MII_SPEED; -+ } else if (state->interface == PHY_INTERFACE_MODE_SGMII) { -+ /* SGMII mode receives the state from the PHY */ -+ new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE; -+ new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE; -+ new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN | -+ MVNETA_GMAC_FORCE_LINK_PASS)) | -+ MVNETA_GMAC_INBAND_AN_ENABLE | -+ MVNETA_GMAC_AN_SPEED_EN | -+ MVNETA_GMAC_AN_DUPLEX_EN; -+ } else { -+ /* 802.3z negotiation - only 1000base-X */ -+ new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X; -+ new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE; -+ new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN | -+ MVNETA_GMAC_FORCE_LINK_PASS)) | -+ MVNETA_GMAC_INBAND_AN_ENABLE | -+ MVNETA_GMAC_CONFIG_GMII_SPEED | -+ /* The MAC only supports FD mode */ -+ MVNETA_GMAC_CONFIG_FULL_DUPLEX; -+ -+ if (state->pause & MLO_PAUSE_AN && state->an_enabled) -+ new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN; -+ } -+ -+ /* Armada 370 documentation says we can only change the port mode -+ * and in-band enable when the link is down, so force it down -+ * while making these changes. We also do this for GMAC_CTRL2 */ -+ if ((new_ctrl0 ^ gmac_ctrl0) & MVNETA_GMAC0_PORT_1000BASE_X || -+ (new_ctrl2 ^ gmac_ctrl2) & MVNETA_GMAC2_INBAND_AN_ENABLE || -+ (new_an ^ gmac_an) & MVNETA_GMAC_INBAND_AN_ENABLE) { -+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, -+ (gmac_an & ~MVNETA_GMAC_FORCE_LINK_PASS) | -+ MVNETA_GMAC_FORCE_LINK_DOWN); -+ } -+ -+ if (new_ctrl0 != gmac_ctrl0) -+ mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0); -+ if (new_ctrl2 != gmac_ctrl2) -+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, new_ctrl2); -+ if (new_clk != gmac_clk) -+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, new_clk); -+ if (new_an != gmac_an) -+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, new_an); -+} -+ -+static void mvneta_set_eee(struct mvneta_port *pp, bool enable) -+{ -+ u32 lpi_ctl1; -+ -+ lpi_ctl1 = mvreg_read(pp, MVNETA_LPI_CTRL_1); -+ if (enable) -+ lpi_ctl1 |= MVNETA_LPI_REQUEST_ENABLE; -+ else -+ lpi_ctl1 &= ~MVNETA_LPI_REQUEST_ENABLE; -+ mvreg_write(pp, MVNETA_LPI_CTRL_1, lpi_ctl1); -+} -+ -+static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode) -+{ -+ struct mvneta_port *pp = netdev_priv(ndev); -+ u32 val; -+ -+ mvneta_port_down(pp); -+ -+ if (!phylink_autoneg_inband(mode)) { -+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); -+ val &= ~MVNETA_GMAC_FORCE_LINK_PASS; -+ val |= MVNETA_GMAC_FORCE_LINK_DOWN; -+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); - } - -- if (phydev->link != pp->link) { -- if (!phydev->link) { -- pp->duplex = -1; -- pp->speed = 0; -- } -+ pp->eee_active = false; -+ mvneta_set_eee(pp, false); -+} -+ -+static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode, -+ struct phy_device *phy) -+{ -+ struct mvneta_port *pp = netdev_priv(ndev); -+ u32 val; - -- pp->link = phydev->link; -- status_change = 1; -+ if (!phylink_autoneg_inband(mode)) { -+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); -+ val &= ~MVNETA_GMAC_FORCE_LINK_DOWN; -+ val |= MVNETA_GMAC_FORCE_LINK_PASS; -+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); - } - -- if (status_change) { -- if (phydev->link) { -- if (!pp->use_inband_status) { -- u32 val = mvreg_read(pp, -- MVNETA_GMAC_AUTONEG_CONFIG); -- val &= ~MVNETA_GMAC_FORCE_LINK_DOWN; -- val |= MVNETA_GMAC_FORCE_LINK_PASS; -- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, -- val); -- } -- mvneta_port_up(pp); -- } else { -- if (!pp->use_inband_status) { -- u32 val = mvreg_read(pp, -- MVNETA_GMAC_AUTONEG_CONFIG); -- val &= ~MVNETA_GMAC_FORCE_LINK_PASS; -- val |= MVNETA_GMAC_FORCE_LINK_DOWN; -- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, -- val); -- } -- mvneta_port_down(pp); -- } -- phy_print_status(phydev); -+ mvneta_port_up(pp); -+ -+ if (phy && pp->eee_enabled) { -+ pp->eee_active = phy_init_eee(phy, 0) >= 0; -+ mvneta_set_eee(pp, pp->eee_active && pp->tx_lpi_enabled); - } - } - -+static const struct phylink_mac_ops mvneta_phylink_ops = { -+ .validate = mvneta_validate, -+ .mac_link_state = mvneta_mac_link_state, -+ .mac_an_restart = mvneta_mac_an_restart, -+ .mac_config = mvneta_mac_config, -+ .mac_link_down = mvneta_mac_link_down, -+ .mac_link_up = mvneta_mac_link_up, -+}; -+ - static int mvneta_mdio_probe(struct mvneta_port *pp) - { -- struct phy_device *phy_dev; - struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL }; -+ int err = phylink_of_phy_connect(pp->phylink, pp->dn); -+ if (err) -+ netdev_err(pp->dev, "could not attach PHY\n"); - -- phy_dev = of_phy_connect(pp->dev, pp->phy_node, mvneta_adjust_link, 0, -- pp->phy_interface); -- if (!phy_dev) { -- netdev_err(pp->dev, "could not find the PHY\n"); -- return -ENODEV; -- } -- -- phy_ethtool_get_wol(phy_dev, &wol); -+ phylink_ethtool_get_wol(pp->phylink, &wol); - device_set_wakeup_capable(&pp->dev->dev, !!wol.supported); - -- phy_dev->supported &= PHY_GBIT_FEATURES; -- phy_dev->advertising = phy_dev->supported; -- -- pp->link = 0; -- pp->duplex = 0; -- pp->speed = 0; -- -- return 0; -+ return err; - } - - static void mvneta_mdio_remove(struct mvneta_port *pp) - { -- struct net_device *ndev = pp->dev; -- -- phy_disconnect(ndev->phydev); -+ phylink_disconnect_phy(pp->phylink); - } - - /* Electing a CPU must be done in an atomic way: it should be done -@@ -3626,10 +3712,9 @@ static int mvneta_stop(struct net_device - - static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) - { -- if (!dev->phydev) -- return -ENOTSUPP; -+ struct mvneta_port *pp = netdev_priv(dev); - -- return phy_mii_ioctl(dev->phydev, ifr, cmd); -+ return phylink_mii_ioctl(pp->phylink, ifr, cmd); - } - - /* Ethtool methods */ -@@ -3640,44 +3725,25 @@ mvneta_ethtool_set_link_ksettings(struct - const struct ethtool_link_ksettings *cmd) - { - struct mvneta_port *pp = netdev_priv(ndev); -- struct phy_device *phydev = ndev->phydev; - -- if (!phydev) -- return -ENODEV; -- -- if ((cmd->base.autoneg == AUTONEG_ENABLE) != pp->use_inband_status) { -- u32 val; -- -- mvneta_set_autoneg(pp, cmd->base.autoneg == AUTONEG_ENABLE); -- -- if (cmd->base.autoneg == AUTONEG_DISABLE) { -- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); -- val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED | -- MVNETA_GMAC_CONFIG_GMII_SPEED | -- MVNETA_GMAC_CONFIG_FULL_DUPLEX); -- -- if (phydev->duplex) -- val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; -+ return phylink_ethtool_ksettings_set(pp->phylink, cmd); -+} - -- if (phydev->speed == SPEED_1000) -- val |= MVNETA_GMAC_CONFIG_GMII_SPEED; -- else if (phydev->speed == SPEED_100) -- val |= MVNETA_GMAC_CONFIG_MII_SPEED; -+/* Get link ksettings for ethtools */ -+static int -+mvneta_ethtool_get_link_ksettings(struct net_device *ndev, -+ struct ethtool_link_ksettings *cmd) -+{ -+ struct mvneta_port *pp = netdev_priv(ndev); - -- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); -- } -+ return phylink_ethtool_ksettings_get(pp->phylink, cmd); -+} - -- pp->use_inband_status = (cmd->base.autoneg == AUTONEG_ENABLE); -- netdev_info(pp->dev, "autoneg status set to %i\n", -- pp->use_inband_status); -- -- if (netif_running(ndev)) { -- mvneta_port_down(pp); -- mvneta_port_up(pp); -- } -- } -+static int mvneta_ethtool_nway_reset(struct net_device *dev) -+{ -+ struct mvneta_port *pp = netdev_priv(dev); - -- return phy_ethtool_ksettings_set(ndev->phydev, cmd); -+ return phylink_ethtool_nway_reset(pp->phylink); - } - - /* Set interrupt coalescing for ethtools */ -@@ -3769,6 +3835,22 @@ static int mvneta_ethtool_set_ringparam( - return 0; - } - -+static void mvneta_ethtool_get_pauseparam(struct net_device *dev, -+ struct ethtool_pauseparam *pause) -+{ -+ struct mvneta_port *pp = netdev_priv(dev); -+ -+ phylink_ethtool_get_pauseparam(pp->phylink, pause); -+} -+ -+static int mvneta_ethtool_set_pauseparam(struct net_device *dev, -+ struct ethtool_pauseparam *pause) -+{ -+ struct mvneta_port *pp = netdev_priv(dev); -+ -+ return phylink_ethtool_set_pauseparam(pp->phylink, pause); -+} -+ - static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset, - u8 *data) - { -@@ -3785,26 +3867,35 @@ static void mvneta_ethtool_update_stats( - { - const struct mvneta_statistic *s; - void __iomem *base = pp->base; -- u32 high, low, val; -- u64 val64; -+ u32 high, low; -+ u64 val; - int i; - - for (i = 0, s = mvneta_statistics; - s < mvneta_statistics + ARRAY_SIZE(mvneta_statistics); - s++, i++) { -+ val = 0; -+ - switch (s->type) { - case T_REG_32: - val = readl_relaxed(base + s->offset); -- pp->ethtool_stats[i] += val; - break; - case T_REG_64: - /* Docs say to read low 32-bit then high */ - low = readl_relaxed(base + s->offset); - high = readl_relaxed(base + s->offset + 4); -- val64 = (u64)high << 32 | low; -- pp->ethtool_stats[i] += val64; -+ val = (u64)high << 32 | low; -+ break; -+ case T_SW: -+ switch (s->offset) { -+ case ETHTOOL_STAT_EEE_WAKEUP: -+ val = phylink_get_eee_err(pp->phylink); -+ break; -+ } - break; - } -+ -+ pp->ethtool_stats[i] += val; - } - } - -@@ -3939,28 +4030,65 @@ static int mvneta_ethtool_get_rxfh(struc - static void mvneta_ethtool_get_wol(struct net_device *dev, - struct ethtool_wolinfo *wol) - { -- wol->supported = 0; -- wol->wolopts = 0; -+ struct mvneta_port *pp = netdev_priv(dev); - -- if (dev->phydev) -- phy_ethtool_get_wol(dev->phydev, wol); -+ phylink_ethtool_get_wol(pp->phylink, wol); - } - - static int mvneta_ethtool_set_wol(struct net_device *dev, - struct ethtool_wolinfo *wol) - { -+ struct mvneta_port *pp = netdev_priv(dev); - int ret; - -- if (!dev->phydev) -- return -EOPNOTSUPP; -- -- ret = phy_ethtool_set_wol(dev->phydev, wol); -+ ret = phylink_ethtool_set_wol(pp->phylink, wol); - if (!ret) - device_set_wakeup_enable(&dev->dev, !!wol->wolopts); - - return ret; - } - -+static int mvneta_ethtool_get_eee(struct net_device *dev, -+ struct ethtool_eee *eee) -+{ -+ struct mvneta_port *pp = netdev_priv(dev); -+ u32 lpi_ctl0; -+ -+ lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0); -+ -+ eee->eee_enabled = pp->eee_enabled; -+ eee->eee_active = pp->eee_active; -+ eee->tx_lpi_enabled = pp->tx_lpi_enabled; -+ eee->tx_lpi_timer = (lpi_ctl0) >> 8; // * scale; -+ -+ return phylink_ethtool_get_eee(pp->phylink, eee); -+} -+ -+static int mvneta_ethtool_set_eee(struct net_device *dev, -+ struct ethtool_eee *eee) -+{ -+ struct mvneta_port *pp = netdev_priv(dev); -+ u32 lpi_ctl0; -+ -+ /* The Armada 37x documents do not give limits for this other than -+ * it being an 8-bit register. */ -+ if (eee->tx_lpi_enabled && -+ (eee->tx_lpi_timer < 0 || eee->tx_lpi_timer > 255)) -+ return -EINVAL; -+ -+ lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0); -+ lpi_ctl0 &= ~(0xff << 8); -+ lpi_ctl0 |= eee->tx_lpi_timer << 8; -+ mvreg_write(pp, MVNETA_LPI_CTRL_0, lpi_ctl0); -+ -+ pp->eee_enabled = eee->eee_enabled; -+ pp->tx_lpi_enabled = eee->tx_lpi_enabled; -+ -+ mvneta_set_eee(pp, eee->tx_lpi_enabled && eee->eee_enabled); -+ -+ return phylink_ethtool_set_eee(pp->phylink, eee); -+} -+ - static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb, - void *accel_priv, - select_queue_fallback_t fallback) -@@ -3984,13 +4112,15 @@ static const struct net_device_ops mvnet - }; - - static const struct ethtool_ops mvneta_eth_tool_ops = { -- .nway_reset = phy_ethtool_nway_reset, -+ .nway_reset = mvneta_ethtool_nway_reset, - .get_link = ethtool_op_get_link, - .set_coalesce = mvneta_ethtool_set_coalesce, - .get_coalesce = mvneta_ethtool_get_coalesce, - .get_drvinfo = mvneta_ethtool_get_drvinfo, - .get_ringparam = mvneta_ethtool_get_ringparam, - .set_ringparam = mvneta_ethtool_set_ringparam, -+ .get_pauseparam = mvneta_ethtool_get_pauseparam, -+ .set_pauseparam = mvneta_ethtool_set_pauseparam, - .get_strings = mvneta_ethtool_get_strings, - .get_ethtool_stats = mvneta_ethtool_get_stats, - .get_sset_count = mvneta_ethtool_get_sset_count, -@@ -3998,10 +4128,12 @@ static const struct ethtool_ops mvneta_e - .get_rxnfc = mvneta_ethtool_get_rxnfc, - .get_rxfh = mvneta_ethtool_get_rxfh, - .set_rxfh = mvneta_ethtool_set_rxfh, -- .get_link_ksettings = phy_ethtool_get_link_ksettings, -+ .get_link_ksettings = mvneta_ethtool_get_link_ksettings, - .set_link_ksettings = mvneta_ethtool_set_link_ksettings, - .get_wol = mvneta_ethtool_get_wol, - .set_wol = mvneta_ethtool_set_wol, -+ .get_eee = mvneta_ethtool_get_eee, -+ .set_eee = mvneta_ethtool_set_eee, - }; - - /* Initialize hw */ -@@ -4146,14 +4278,13 @@ static int mvneta_probe(struct platform_ - { - struct resource *res; - struct device_node *dn = pdev->dev.of_node; -- struct device_node *phy_node; - struct device_node *bm_node; - struct mvneta_port *pp; - struct net_device *dev; -+ struct phylink *phylink; - const char *dt_mac_addr; - char hw_mac_addr[ETH_ALEN]; - const char *mac_from; -- const char *managed; - int tx_csum_limit; - int phy_mode; - int err; -@@ -4169,31 +4300,11 @@ static int mvneta_probe(struct platform_ - goto err_free_netdev; - } - -- phy_node = of_parse_phandle(dn, "phy", 0); -- if (!phy_node) { -- if (!of_phy_is_fixed_link(dn)) { -- dev_err(&pdev->dev, "no PHY specified\n"); -- err = -ENODEV; -- goto err_free_irq; -- } -- -- err = of_phy_register_fixed_link(dn); -- if (err < 0) { -- dev_err(&pdev->dev, "cannot register fixed PHY\n"); -- goto err_free_irq; -- } -- -- /* In the case of a fixed PHY, the DT node associated -- * to the PHY is the Ethernet MAC DT node. -- */ -- phy_node = of_node_get(dn); -- } -- - phy_mode = of_get_phy_mode(dn); - if (phy_mode < 0) { - dev_err(&pdev->dev, "incorrect phy-mode\n"); - err = -EINVAL; -- goto err_put_phy_node; -+ goto err_free_irq; - } - - dev->tx_queue_len = MVNETA_MAX_TXD; -@@ -4204,12 +4315,7 @@ static int mvneta_probe(struct platform_ - - pp = netdev_priv(dev); - spin_lock_init(&pp->lock); -- pp->phy_node = phy_node; -- pp->phy_interface = phy_mode; -- -- err = of_property_read_string(dn, "managed", &managed); -- pp->use_inband_status = (err == 0 && -- strcmp(managed, "in-band-status") == 0); -+ pp->dn = dn; - - pp->rxq_def = rxq_def; - -@@ -4231,7 +4337,7 @@ static int mvneta_probe(struct platform_ - pp->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(pp->clk)) { - err = PTR_ERR(pp->clk); -- goto err_put_phy_node; -+ goto err_free_irq; - } - - clk_prepare_enable(pp->clk); -@@ -4357,6 +4463,14 @@ static int mvneta_probe(struct platform_ - /* 9676 == 9700 - 20 and rounding to 8 */ - dev->max_mtu = 9676; - -+ phylink = phylink_create(dev, dn, phy_mode, &mvneta_phylink_ops); -+ if (IS_ERR(phylink)) { -+ err = PTR_ERR(phylink); -+ goto err_netdev; -+ } -+ -+ pp->phylink = phylink; -+ - err = register_netdev(dev); - if (err < 0) { - dev_err(&pdev->dev, "failed to register\n"); -@@ -4368,14 +4482,6 @@ static int mvneta_probe(struct platform_ - - platform_set_drvdata(pdev, pp->dev); - -- if (pp->use_inband_status) { -- struct phy_device *phy = of_phy_find_device(dn); -- -- mvneta_fixed_link_update(pp, phy); -- -- put_device(&phy->mdio.dev); -- } -- - return 0; - - err_netdev: -@@ -4384,16 +4490,14 @@ err_netdev: - mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short, - 1 << pp->id); - } -+ if (pp->phylink) -+ phylink_destroy(pp->phylink); - free_percpu(pp->stats); - err_free_ports: - free_percpu(pp->ports); - err_clk: - clk_disable_unprepare(pp->clk_bus); - clk_disable_unprepare(pp->clk); --err_put_phy_node: -- of_node_put(phy_node); -- if (of_phy_is_fixed_link(dn)) -- of_phy_deregister_fixed_link(dn); - err_free_irq: - irq_dispose_mapping(dev->irq); - err_free_netdev: -@@ -4405,7 +4509,6 @@ err_free_netdev: - static int mvneta_remove(struct platform_device *pdev) - { - struct net_device *dev = platform_get_drvdata(pdev); -- struct device_node *dn = pdev->dev.of_node; - struct mvneta_port *pp = netdev_priv(dev); - - unregister_netdev(dev); -@@ -4413,10 +4516,8 @@ static int mvneta_remove(struct platform - clk_disable_unprepare(pp->clk); - free_percpu(pp->ports); - free_percpu(pp->stats); -- if (of_phy_is_fixed_link(dn)) -- of_phy_deregister_fixed_link(dn); - irq_dispose_mapping(dev->irq); -- of_node_put(pp->phy_node); -+ phylink_destroy(pp->phylink); - free_netdev(dev); - - if (pp->bm_priv) { -@@ -4468,9 +4569,6 @@ static int mvneta_resume(struct device * - return err; - } - -- if (pp->use_inband_status) -- mvneta_fixed_link_update(pp, dev->phydev); -- - netif_device_attach(dev); - if (netif_running(dev)) { - mvneta_open(dev); diff --git a/target/linux/mvebu/patches-4.14/404-net-mvneta-hack-fix-phy_interface.patch b/target/linux/mvebu/patches-4.14/404-net-mvneta-hack-fix-phy_interface.patch deleted file mode 100644 index 906c163ac9..0000000000 --- a/target/linux/mvebu/patches-4.14/404-net-mvneta-hack-fix-phy_interface.patch +++ /dev/null @@ -1,28 +0,0 @@ -From acdfcc7ef78c46baca1439a1cac5b73008abc672 Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@armlinux.org.uk> -Date: Tue, 16 May 2017 11:55:58 +0100 -Subject: net: mvneta: hack fix phy_interface - -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> ---- - drivers/net/ethernet/marvell/mvneta.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -427,6 +427,7 @@ struct mvneta_port { - u16 tx_ring_size; - u16 rx_ring_size; - -+ phy_interface_t phy_interface; - struct device_node *dn; - unsigned int tx_csum_limit; - struct phylink *phylink; -@@ -4315,6 +4316,7 @@ static int mvneta_probe(struct platform_ - - pp = netdev_priv(dev); - spin_lock_init(&pp->lock); -+ pp->phy_interface = phy_mode; - pp->dn = dn; - - pp->rxq_def = rxq_def; diff --git a/target/linux/mvebu/patches-4.14/405-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch b/target/linux/mvebu/patches-4.14/405-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch deleted file mode 100644 index 7d02b0a93b..0000000000 --- a/target/linux/mvebu/patches-4.14/405-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch +++ /dev/null @@ -1,56 +0,0 @@ -From fde9e742a47606110232b7464608b6f9c0510938 Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@armlinux.org.uk> -Date: Sat, 24 Dec 2016 10:27:08 +0000 -Subject: net: mvneta: disable MVNETA_CAUSE_PSC_SYNC_CHANGE interrupt - -The PSC sync change interrupt can fire multiple times while the link is -down. As this isn't information we make use of, it's pointless having -the interrupt enabled, so let's disable this interrupt. - -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> ---- - drivers/net/ethernet/marvell/mvneta.c | 12 ++++-------- - 1 file changed, 4 insertions(+), 8 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -2705,8 +2705,7 @@ static int mvneta_poll(struct napi_struc - mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0); - - if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE | -- MVNETA_CAUSE_LINK_CHANGE | -- MVNETA_CAUSE_PSC_SYNC_CHANGE)) -+ MVNETA_CAUSE_LINK_CHANGE)) - mvneta_link_change(pp); - } - -@@ -3045,8 +3044,7 @@ static void mvneta_start_dev(struct mvne - - mvreg_write(pp, MVNETA_INTR_MISC_MASK, - MVNETA_CAUSE_PHY_STATUS_CHANGE | -- MVNETA_CAUSE_LINK_CHANGE | -- MVNETA_CAUSE_PSC_SYNC_CHANGE); -+ MVNETA_CAUSE_LINK_CHANGE); - - phylink_start(pp->phylink); - netif_tx_start_all_queues(pp->dev); -@@ -3542,8 +3540,7 @@ static int mvneta_cpu_online(unsigned in - on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true); - mvreg_write(pp, MVNETA_INTR_MISC_MASK, - MVNETA_CAUSE_PHY_STATUS_CHANGE | -- MVNETA_CAUSE_LINK_CHANGE | -- MVNETA_CAUSE_PSC_SYNC_CHANGE); -+ MVNETA_CAUSE_LINK_CHANGE); - netif_tx_start_all_queues(pp->dev); - spin_unlock(&pp->lock); - return 0; -@@ -3584,8 +3581,7 @@ static int mvneta_cpu_dead(unsigned int - on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true); - mvreg_write(pp, MVNETA_INTR_MISC_MASK, - MVNETA_CAUSE_PHY_STATUS_CHANGE | -- MVNETA_CAUSE_LINK_CHANGE | -- MVNETA_CAUSE_PSC_SYNC_CHANGE); -+ MVNETA_CAUSE_LINK_CHANGE); - netif_tx_start_all_queues(pp->dev); - return 0; - } diff --git a/target/linux/mvebu/patches-4.14/406-net-mvneta-add-module-EEPROM-reading-support.patch b/target/linux/mvebu/patches-4.14/406-net-mvneta-add-module-EEPROM-reading-support.patch deleted file mode 100644 index 39eb33ac2c..0000000000 --- a/target/linux/mvebu/patches-4.14/406-net-mvneta-add-module-EEPROM-reading-support.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 2ff039aa4462c2104c210b7cf39691c612de8214 Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@arm.linux.org.uk> -Date: Thu, 1 Oct 2015 23:32:39 +0100 -Subject: net: mvneta: add module EEPROM reading support - -Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> ---- - drivers/net/ethernet/marvell/mvneta.c | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -4045,6 +4045,22 @@ static int mvneta_ethtool_set_wol(struct - return ret; - } - -+static int mvneta_ethtool_get_module_info(struct net_device *dev, -+ struct ethtool_modinfo *modinfo) -+{ -+ struct mvneta_port *pp = netdev_priv(dev); -+ -+ return phylink_ethtool_get_module_info(pp->phylink, modinfo); -+} -+ -+static int mvneta_ethtool_get_module_eeprom(struct net_device *dev, -+ struct ethtool_eeprom *ee, u8 *buf) -+{ -+ struct mvneta_port *pp = netdev_priv(dev); -+ -+ return phylink_ethtool_get_module_eeprom(pp->phylink, ee, buf); -+} -+ - static int mvneta_ethtool_get_eee(struct net_device *dev, - struct ethtool_eee *eee) - { -@@ -4129,6 +4145,8 @@ static const struct ethtool_ops mvneta_e - .set_link_ksettings = mvneta_ethtool_set_link_ksettings, - .get_wol = mvneta_ethtool_get_wol, - .set_wol = mvneta_ethtool_set_wol, -+ .get_module_info = mvneta_ethtool_get_module_info, -+ .get_module_eeprom = mvneta_ethtool_get_module_eeprom, - .get_eee = mvneta_ethtool_get_eee, - .set_eee = mvneta_ethtool_set_eee, - }; diff --git a/target/linux/mvebu/patches-4.14/407-phy-fixed-phy-remove-fixed_phy_update_state.patch b/target/linux/mvebu/patches-4.14/407-phy-fixed-phy-remove-fixed_phy_update_state.patch deleted file mode 100644 index 71c2f45555..0000000000 --- a/target/linux/mvebu/patches-4.14/407-phy-fixed-phy-remove-fixed_phy_update_state.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 774ce2eda0a929f79ee398ba6d2d13fd406f31c4 Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@arm.linux.org.uk> -Date: Fri, 2 Oct 2015 22:46:54 +0100 -Subject: phy: fixed-phy: remove fixed_phy_update_state() - -mvneta is the only user of fixed_phy_update_state(), which has been -converted to use phylink instead. Remove fixed_phy_update_state(). - -Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> ---- - drivers/net/phy/fixed_phy.c | 31 ------------------------------- - include/linux/phy_fixed.h | 9 --------- - 2 files changed, 40 deletions(-) - ---- a/drivers/net/phy/fixed_phy.c -+++ b/drivers/net/phy/fixed_phy.c -@@ -115,37 +115,6 @@ int fixed_phy_set_link_update(struct phy - } - EXPORT_SYMBOL_GPL(fixed_phy_set_link_update); - --int fixed_phy_update_state(struct phy_device *phydev, -- const struct fixed_phy_status *status, -- const struct fixed_phy_status *changed) --{ -- struct fixed_mdio_bus *fmb = &platform_fmb; -- struct fixed_phy *fp; -- -- if (!phydev || phydev->mdio.bus != fmb->mii_bus) -- return -EINVAL; -- -- list_for_each_entry(fp, &fmb->phys, node) { -- if (fp->addr == phydev->mdio.addr) { -- write_seqcount_begin(&fp->seqcount); --#define _UPD(x) if (changed->x) \ -- fp->status.x = status->x -- _UPD(link); -- _UPD(speed); -- _UPD(duplex); -- _UPD(pause); -- _UPD(asym_pause); --#undef _UPD -- fixed_phy_update(fp); -- write_seqcount_end(&fp->seqcount); -- return 0; -- } -- } -- -- return -ENOENT; --} --EXPORT_SYMBOL(fixed_phy_update_state); -- - int fixed_phy_add(unsigned int irq, int phy_addr, - struct fixed_phy_status *status, - int link_gpio) ---- a/include/linux/phy_fixed.h -+++ b/include/linux/phy_fixed.h -@@ -24,9 +24,6 @@ extern void fixed_phy_unregister(struct - extern int fixed_phy_set_link_update(struct phy_device *phydev, - int (*link_update)(struct net_device *, - struct fixed_phy_status *)); --extern int fixed_phy_update_state(struct phy_device *phydev, -- const struct fixed_phy_status *status, -- const struct fixed_phy_status *changed); - #else - static inline int fixed_phy_add(unsigned int irq, int phy_id, - struct fixed_phy_status *status, -@@ -50,12 +47,6 @@ static inline int fixed_phy_set_link_upd - { - return -ENODEV; - } --static inline int fixed_phy_update_state(struct phy_device *phydev, -- const struct fixed_phy_status *status, -- const struct fixed_phy_status *changed) --{ -- return -ENODEV; --} - #endif /* CONFIG_FIXED_PHY */ - - #endif /* __PHY_FIXED_H */ diff --git a/target/linux/mvebu/patches-4.14/408-sfp-move-module-eeprom-ethtool-access-into-netdev-co.patch b/target/linux/mvebu/patches-4.14/408-sfp-move-module-eeprom-ethtool-access-into-netdev-co.patch deleted file mode 100644 index 19f8f1e632..0000000000 --- a/target/linux/mvebu/patches-4.14/408-sfp-move-module-eeprom-ethtool-access-into-netdev-co.patch +++ /dev/null @@ -1,181 +0,0 @@ -From c47beb7e3f8575dfd7d58240a72c4e4e66ce5449 Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@armlinux.org.uk> -Date: Fri, 14 Apr 2017 15:26:32 +0100 -Subject: sfp: move module eeprom ethtool access into netdev core ethtool - -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> ---- - drivers/net/ethernet/marvell/mvneta.c | 18 ------------------ - drivers/net/phy/phylink.c | 28 ---------------------------- - drivers/net/phy/sfp-bus.c | 6 ++---- - include/linux/netdevice.h | 2 ++ - include/linux/phylink.h | 3 --- - net/core/ethtool.c | 7 +++++++ - 6 files changed, 11 insertions(+), 53 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -4045,22 +4045,6 @@ static int mvneta_ethtool_set_wol(struct - return ret; - } - --static int mvneta_ethtool_get_module_info(struct net_device *dev, -- struct ethtool_modinfo *modinfo) --{ -- struct mvneta_port *pp = netdev_priv(dev); -- -- return phylink_ethtool_get_module_info(pp->phylink, modinfo); --} -- --static int mvneta_ethtool_get_module_eeprom(struct net_device *dev, -- struct ethtool_eeprom *ee, u8 *buf) --{ -- struct mvneta_port *pp = netdev_priv(dev); -- -- return phylink_ethtool_get_module_eeprom(pp->phylink, ee, buf); --} -- - static int mvneta_ethtool_get_eee(struct net_device *dev, - struct ethtool_eee *eee) - { -@@ -4145,8 +4129,6 @@ static const struct ethtool_ops mvneta_e - .set_link_ksettings = mvneta_ethtool_set_link_ksettings, - .get_wol = mvneta_ethtool_get_wol, - .set_wol = mvneta_ethtool_set_wol, -- .get_module_info = mvneta_ethtool_get_module_info, -- .get_module_eeprom = mvneta_ethtool_get_module_eeprom, - .get_eee = mvneta_ethtool_get_eee, - .set_eee = mvneta_ethtool_set_eee, - }; ---- a/drivers/net/phy/phylink.c -+++ b/drivers/net/phy/phylink.c -@@ -1060,34 +1060,6 @@ int phylink_ethtool_set_pauseparam(struc - } - EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam); - --int phylink_ethtool_get_module_info(struct phylink *pl, -- struct ethtool_modinfo *modinfo) --{ -- int ret = -EOPNOTSUPP; -- -- WARN_ON(!lockdep_rtnl_is_held()); -- -- if (pl->sfp_bus) -- ret = sfp_get_module_info(pl->sfp_bus, modinfo); -- -- return ret; --} --EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_info); -- --int phylink_ethtool_get_module_eeprom(struct phylink *pl, -- struct ethtool_eeprom *ee, u8 *buf) --{ -- int ret = -EOPNOTSUPP; -- -- WARN_ON(!lockdep_rtnl_is_held()); -- -- if (pl->sfp_bus) -- ret = sfp_get_module_eeprom(pl->sfp_bus, ee, buf); -- -- return ret; --} --EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_eeprom); -- - int phylink_init_eee(struct phylink *pl, bool clk_stop_enable) - { - int ret = -EPROTONOSUPPORT; ---- a/drivers/net/phy/sfp-bus.c -+++ b/drivers/net/phy/sfp-bus.c -@@ -279,6 +279,7 @@ static int sfp_register_bus(struct sfp_b - bus->socket_ops->attach(bus->sfp); - if (bus->started) - bus->socket_ops->start(bus->sfp); -+ bus->netdev->sfp_bus = bus; - bus->registered = true; - return 0; - } -@@ -294,14 +295,13 @@ static void sfp_unregister_bus(struct sf - if (bus->phydev && ops && ops->disconnect_phy) - ops->disconnect_phy(bus->upstream); - } -+ bus->netdev->sfp_bus = NULL; - bus->registered = false; - } - - - int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo) - { -- if (!bus->registered) -- return -ENOIOCTLCMD; - return bus->socket_ops->module_info(bus->sfp, modinfo); - } - EXPORT_SYMBOL_GPL(sfp_get_module_info); -@@ -309,8 +309,6 @@ EXPORT_SYMBOL_GPL(sfp_get_module_info); - int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee, - u8 *data) - { -- if (!bus->registered) -- return -ENOIOCTLCMD; - return bus->socket_ops->module_eeprom(bus->sfp, ee, data); - } - EXPORT_SYMBOL_GPL(sfp_get_module_eeprom); ---- a/include/linux/netdevice.h -+++ b/include/linux/netdevice.h -@@ -57,6 +57,7 @@ struct device; - struct phy_device; - struct dsa_switch_tree; - -+struct sfp_bus; - /* 802.11 specific */ - struct wireless_dev; - /* 802.15.4 specific */ -@@ -1940,6 +1941,7 @@ struct net_device { - struct netprio_map __rcu *priomap; - #endif - struct phy_device *phydev; -+ struct sfp_bus *sfp_bus; - struct lock_class_key *qdisc_tx_busylock; - struct lock_class_key *qdisc_running_key; - bool proto_down; ---- a/include/linux/phylink.h -+++ b/include/linux/phylink.h -@@ -125,9 +125,6 @@ void phylink_ethtool_get_pauseparam(stru - struct ethtool_pauseparam *); - int phylink_ethtool_set_pauseparam(struct phylink *, - struct ethtool_pauseparam *); --int phylink_ethtool_get_module_info(struct phylink *, struct ethtool_modinfo *); --int phylink_ethtool_get_module_eeprom(struct phylink *, -- struct ethtool_eeprom *, u8 *); - int phylink_init_eee(struct phylink *, bool); - int phylink_get_eee_err(struct phylink *); - int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *); ---- a/net/core/ethtool.c -+++ b/net/core/ethtool.c -@@ -22,6 +22,7 @@ - #include <linux/bitops.h> - #include <linux/uaccess.h> - #include <linux/vmalloc.h> -+#include <linux/sfp.h> - #include <linux/slab.h> - #include <linux/rtnetlink.h> - #include <linux/sched/signal.h> -@@ -2214,6 +2215,9 @@ static int __ethtool_get_module_info(str - const struct ethtool_ops *ops = dev->ethtool_ops; - struct phy_device *phydev = dev->phydev; - -+ if (dev->sfp_bus) -+ return sfp_get_module_info(dev->sfp_bus, modinfo); -+ - if (phydev && phydev->drv && phydev->drv->module_info) - return phydev->drv->module_info(phydev, modinfo); - -@@ -2248,6 +2252,9 @@ static int __ethtool_get_module_eeprom(s - const struct ethtool_ops *ops = dev->ethtool_ops; - struct phy_device *phydev = dev->phydev; - -+ if (dev->sfp_bus) -+ return sfp_get_module_eeprom(dev->sfp_bus, ee, data); -+ - if (phydev && phydev->drv && phydev->drv->module_eeprom) - return phydev->drv->module_eeprom(phydev, ee, data); - diff --git a/target/linux/mvebu/patches-4.14/409-sfp-use-netdev-sfp_bus-for-start-stop.patch b/target/linux/mvebu/patches-4.14/409-sfp-use-netdev-sfp_bus-for-start-stop.patch deleted file mode 100644 index 10bd2d0a46..0000000000 --- a/target/linux/mvebu/patches-4.14/409-sfp-use-netdev-sfp_bus-for-start-stop.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 883dc66755313e133a787eba4dfde313fe33525b Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@armlinux.org.uk> -Date: Fri, 14 Apr 2017 16:41:55 +0100 -Subject: sfp: use netdev sfp_bus for start/stop - -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> ---- - drivers/net/phy/phylink.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/net/phy/phylink.c -+++ b/drivers/net/phy/phylink.c -@@ -777,8 +777,8 @@ void phylink_start(struct phylink *pl) - clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); - phylink_run_resolve(pl); - -- if (pl->sfp_bus) -- sfp_upstream_start(pl->sfp_bus); -+ if (pl->netdev->sfp_bus) -+ sfp_upstream_start(pl->netdev->sfp_bus); - if (pl->phydev) - phy_start(pl->phydev); - } -@@ -790,8 +790,8 @@ void phylink_stop(struct phylink *pl) - - if (pl->phydev) - phy_stop(pl->phydev); -- if (pl->sfp_bus) -- sfp_upstream_stop(pl->sfp_bus); -+ if (pl->netdev->sfp_bus) -+ sfp_upstream_stop(pl->netdev->sfp_bus); - - phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED); - } diff --git a/target/linux/mvebu/patches-4.14/410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch b/target/linux/mvebu/patches-4.14/410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch deleted file mode 100644 index d6e5fbf33f..0000000000 --- a/target/linux/mvebu/patches-4.14/410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch +++ /dev/null @@ -1,132 +0,0 @@ -From 4a4aca08b11501cb1b2c509113bbb65eb66a1f45 Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@armlinux.org.uk> -Date: Fri, 14 Apr 2017 14:21:25 +0100 -Subject: sfp: hack: allow marvell 10G phy support to use SFP - -Allow the Marvell 10G PHY to register with the SFP bus, so that SFP+ -cages can work. This bypasses phylink, meaning that socket status -is not taken into account for the link state. Also, the tx-disable -signal must be commented out in DT for this to work... - -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> ---- - drivers/net/phy/marvell10g.c | 54 +++++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 53 insertions(+), 1 deletion(-) - ---- a/drivers/net/phy/marvell10g.c -+++ b/drivers/net/phy/marvell10g.c -@@ -15,8 +15,10 @@ - * If both the fiber and copper ports are connected, the first to gain - * link takes priority and the other port is completely locked out. - */ -+#include <linux/of.h> - #include <linux/phy.h> - #include <linux/marvell_phy.h> -+#include <linux/sfp.h> - - enum { - MV_PMA_BOOT = 0xc050, -@@ -41,6 +43,11 @@ enum { - MV_AN_RESULT_SPD_10000 = BIT(15), - }; - -+struct mv3310_priv { -+ struct device_node *sfp_node; -+ struct sfp_bus *sfp_bus; -+}; -+ - static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg, - u16 mask, u16 bits) - { -@@ -59,8 +66,25 @@ static int mv3310_modify(struct phy_devi - return ret < 0 ? ret : 1; - } - -+static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) -+{ -+ struct phy_device *phydev = upstream; -+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); -+ -+ if (sfp_parse_interface(priv->sfp_bus, id) != PHY_INTERFACE_MODE_10GKR) { -+ dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); -+ return -EINVAL; -+ } -+ return 0; -+} -+ -+static const struct sfp_upstream_ops mv3310_sfp_ops = { -+ .module_insert = mv3310_sfp_insert, -+}; -+ - static int mv3310_probe(struct phy_device *phydev) - { -+ struct mv3310_priv *priv; - u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN; - int ret; - -@@ -78,9 +102,27 @@ static int mv3310_probe(struct phy_devic - return -ENODEV; - } - -+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ dev_set_drvdata(&phydev->mdio.dev, priv); -+ -+ if (phydev->mdio.dev.of_node) -+ priv->sfp_node = of_parse_phandle(phydev->mdio.dev.of_node, -+ "sfp", 0); -+ - return 0; - } - -+static void mv3310_remove(struct phy_device *phydev) -+{ -+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); -+ -+ if (priv->sfp_bus) -+ sfp_unregister_upstream(priv->sfp_bus); -+} -+ - /* - * Resetting the MV88X3310 causes it to become non-responsive. Avoid - * setting the reset bit(s). -@@ -92,6 +134,7 @@ static int mv3310_soft_reset(struct phy_ - - static int mv3310_config_init(struct phy_device *phydev) - { -+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); - __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, }; - u32 mask; - int val; -@@ -180,6 +223,14 @@ static int mv3310_config_init(struct phy - phydev->supported &= mask; - phydev->advertising &= phydev->supported; - -+ /* Would be nice to do this in the probe function, but unfortunately, -+ * phylib doesn't have phydev->attached_dev set there. -+ */ -+ if (priv->sfp_node && !priv->sfp_bus) -+ priv->sfp_bus = sfp_register_upstream(priv->sfp_node, -+ phydev->attached_dev, -+ phydev, &mv3310_sfp_ops); -+ - return 0; - } - -@@ -363,12 +414,13 @@ static struct phy_driver mv3310_drivers[ - SUPPORTED_FIBRE | - SUPPORTED_10000baseT_Full | - SUPPORTED_Backplane, -- .probe = mv3310_probe, - .soft_reset = mv3310_soft_reset, - .config_init = mv3310_config_init, -+ .probe = mv3310_probe, - .config_aneg = mv3310_config_aneg, - .aneg_done = mv3310_aneg_done, - .read_status = mv3310_read_status, -+ .remove = mv3310_remove, - }, - }; - diff --git a/target/linux/mvebu/patches-4.14/411-sfp-add-sfp-compatible.patch b/target/linux/mvebu/patches-4.14/411-sfp-add-sfp-compatible.patch deleted file mode 100644 index 9174765e6a..0000000000 --- a/target/linux/mvebu/patches-4.14/411-sfp-add-sfp-compatible.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 3344f73509a34d2124b716efc79cd9787773018b Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@armlinux.org.uk> -Date: Fri, 14 Apr 2017 20:17:13 +0100 -Subject: sfp: add sfp+ compatible - -Add a compatible for SFP+ cages. SFP+ cages are backwards compatible, -but the ethernet device behind them may not support the slower speeds -of SFP modules. - -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> ---- - drivers/net/phy/sfp.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/net/phy/sfp.c -+++ b/drivers/net/phy/sfp.c -@@ -1168,6 +1168,7 @@ static int sfp_remove(struct platform_de - - static const struct of_device_id sfp_of_match[] = { - { .compatible = "sff,sfp", }, -+ { .compatible = "sff,sfp+", }, - { }, - }; - MODULE_DEVICE_TABLE(of, sfp_of_match); diff --git a/target/linux/mvebu/patches-4.14/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch b/target/linux/mvebu/patches-4.14/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch deleted file mode 100644 index 222a323825..0000000000 --- a/target/linux/mvebu/patches-4.14/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@armlinux.org.uk> -Date: Tue, 29 Nov 2016 10:15:45 +0000 -Subject: ARM: dts: armada388-clearfog: emmc on clearfog base - -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> ---- - arch/arm/boot/dts/armada-388-clearfog-base.dts | 1 + - .../dts/armada-38x-solidrun-microsom-emmc.dtsi | 62 ++++++++++++++++++++++ - 2 files changed, 63 insertions(+) - create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi - ---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts -+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts -@@ -48,6 +48,7 @@ - - /dts-v1/; - #include "armada-388-clearfog.dtsi" -+#include "armada-38x-solidrun-microsom-emmc.dtsi" - - / { - model = "SolidRun Clearfog Base A1"; ---- /dev/null -+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi -@@ -0,0 +1,62 @@ -+/* -+ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC -+ * -+ * Copyright (C) 2015 Russell King -+ * -+ * This board is in development; the contents of this file work with -+ * the A1 rev 2.0 of the board, which does not represent final -+ * production board. Things will change, don't expect this file to -+ * remain compatible info the future. -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+/ { -+ soc { -+ internal-regs { -+ sdhci@d8000 { -+ bus-width = <4>; -+ no-1-8-v; -+ non-removable; -+ pinctrl-0 = <µsom_sdhci_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ wp-inverted; -+ }; -+ }; -+ }; -+}; diff --git a/target/linux/mvebu/patches-4.14/413-ARM-dts-armada388-clearfog-increase-speed-of-i2c0-to.patch b/target/linux/mvebu/patches-4.14/413-ARM-dts-armada388-clearfog-increase-speed-of-i2c0-to.patch deleted file mode 100644 index 4aedc82fe7..0000000000 --- a/target/linux/mvebu/patches-4.14/413-ARM-dts-armada388-clearfog-increase-speed-of-i2c0-to.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 6e127081e669cf163a818dc04d590790e4ed9527 Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@armlinux.org.uk> -Date: Tue, 29 Nov 2016 20:06:44 +0000 -Subject: ARM: dts: armada388-clearfog: increase speed of i2c0 to 400kHz - -All the devices on I2C0 support fast mode, so increase the bus speed -to match. The Armada 388 is known to have a timing issue when in -standard mode, which we believe causes the ficticious device at 0x64 -to appear. - -Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> ---- - arch/arm/boot/dts/armada-388-clearfog.dtsi | 7 ++----- - 1 file changed, 2 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/armada-388-clearfog.dtsi -+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi -@@ -143,8 +143,7 @@ - }; - - &i2c0 { -- /* Is there anything on this? */ -- clock-frequency = <100000>; -+ clock-frequency = <400000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; -@@ -239,13 +238,11 @@ - }; - }; - -- /* The MCP3021 is 100kHz clock only */ -+ /* The MCP3021 supports standard and fast modes */ - mikrobus_adc: mcp3021@4c { - compatible = "microchip,mcp3021"; - reg = <0x4c>; - }; -- -- /* Also something at 0x64 */ - }; - - &i2c1 { diff --git a/target/linux/mvebu/patches-4.14/414-ARM-dts-armada388-clearfog-add-SFP-module-support.patch b/target/linux/mvebu/patches-4.14/414-ARM-dts-armada388-clearfog-add-SFP-module-support.patch deleted file mode 100644 index 52ddcb6063..0000000000 --- a/target/linux/mvebu/patches-4.14/414-ARM-dts-armada388-clearfog-add-SFP-module-support.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 74fa68669c88f73bceff523cb764297b7d1e132b Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@arm.linux.org.uk> -Date: Tue, 29 Nov 2016 10:13:44 +0000 -Subject: ARM: dts: armada388-clearfog: add SFP module support - -Add SFP module support for Clearfog using the SFP phylink support. - -Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> ---- - arch/arm/boot/dts/armada-388-clearfog.dtsi | 44 ++++++++---------------------- - 1 file changed, 11 insertions(+), 33 deletions(-) - ---- a/arch/arm/boot/dts/armada-388-clearfog.dtsi -+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi -@@ -117,6 +117,15 @@ - }; - }; - }; -+ -+ sfp: sfp { -+ compatible = "sff,sfp"; -+ i2c-bus = <&i2c1>; -+ los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; -+ mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>; -+ tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; -+ tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>; -+ }; - }; - - ð1 { -@@ -133,13 +142,10 @@ - bm,pool-long = <3>; - bm,pool-short = <1>; - buffer-manager = <&bm>; -+ managed = "in-band-status"; - phy-mode = "sgmii"; -+ sfp = <&sfp>; - status = "okay"; -- -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; - }; - - &i2c0 { -@@ -208,34 +214,6 @@ - output-low; - line-name = "m.2 devslp"; - }; -- sfp_los { -- /* SFP loss of signal */ -- gpio-hog; -- gpios = <12 GPIO_ACTIVE_HIGH>; -- input; -- line-name = "sfp-los"; -- }; -- sfp_tx_fault { -- /* SFP laser fault */ -- gpio-hog; -- gpios = <13 GPIO_ACTIVE_HIGH>; -- input; -- line-name = "sfp-tx-fault"; -- }; -- sfp_tx_disable { -- /* SFP transmit disable */ -- gpio-hog; -- gpios = <14 GPIO_ACTIVE_HIGH>; -- output-low; -- line-name = "sfp-tx-disable"; -- }; -- sfp_mod_def0 { -- /* SFP module present */ -- gpio-hog; -- gpios = <15 GPIO_ACTIVE_LOW>; -- input; -- line-name = "sfp-mod-def0"; -- }; - }; - - /* The MCP3021 supports standard and fast modes */ diff --git a/target/linux/mvebu/patches-4.14/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch b/target/linux/mvebu/patches-4.14/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch deleted file mode 100644 index 0e24d08c8d..0000000000 --- a/target/linux/mvebu/patches-4.14/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch +++ /dev/null @@ -1,124 +0,0 @@ -From 09a0122c74ec076e08512f1b00b7ccb8a450282f Mon Sep 17 00:00:00 2001 -From: Russell King <rmk+kernel@arm.linux.org.uk> -Date: Tue, 29 Nov 2016 10:15:43 +0000 -Subject: ARM: dts: armada388-clearfog: document MPP usage - -Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> ---- - arch/arm/boot/dts/armada-388-clearfog-base.dts | 51 ++++++++++++++++++++++++++ - arch/arm/boot/dts/armada-388-clearfog.dts | 50 +++++++++++++++++++++++++ - 2 files changed, 101 insertions(+) - ---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts -+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts -@@ -108,3 +108,54 @@ - marvell,function = "gpio"; - }; - }; -+ -+/* -+MPP -+18: pu gpio pca9655 int -+19: gpio phy reset -+20: pu gpio sd0 detect -+21: sd0:cmd -+22: pd gpio mikro int -+23: -+ -+24: ua1:rxd mikro rx -+25: ua1:txd mikro tx -+26: pu i2c1:sck -+27: pu i2c1:sda -+28: sd0:clk -+29: pd gpio mikro rst -+30: -+31: -+ -+32: -+33: -+34: -+35: -+36: -+37: sd0:d3 -+38: sd0:d0 -+39: sd0:d1 -+ -+40: sd0:d2 -+41: -+42: -+43: spi1:cs2 mikro cs -+44: gpio rear button sw3 -+45: ref:clk_out0 phy#0 clock -+46: ref:clk_out1 phy#1 clock -+47: -+ -+48: gpio J18 spare gpio -+49: gpio U10 I2C_IRQ(GNSS) -+50: gpio board id? -+51: -+52: -+53: -+54: gpio mikro pwm -+55: -+ -+56: pu spi1:mosi mikro mosi -+57: pd spi1:sck mikro sck -+58: spi1:miso mikro miso -+59: -+*/ ---- a/arch/arm/boot/dts/armada-388-clearfog.dts -+++ b/arch/arm/boot/dts/armada-388-clearfog.dts -@@ -290,3 +290,53 @@ - */ - pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>; - }; -+/* -++#define A38x_CUSTOMER_BOARD_1_MPP16_23 0x00400011 -+MPP18: gpio ? (pca9655 int?) -+MPP19: gpio ? (clkreq?) -+MPP20: gpio ? (sd0 detect) -+MPP21: sd0:cmd x sd0 -+MPP22: gpio x mikro int -+MPP23: gpio x switch irq -++#define A38x_CUSTOMER_BOARD_1_MPP24_31 0x22043333 -+MPP24: ua1:rxd x mikro rx -+MPP25: ua1:txd x mikro tx -+MPP26: i2c1:sck x mikro sck -+MPP27: i2c1:sda x mikro sda -+MPP28: sd0:clk x sd0 -+MPP29: gpio x mikro rst -+MPP30: ge1:txd2 ? (config) -+MPP31: ge1:txd3 ? (config) -++#define A38x_CUSTOMER_BOARD_1_MPP32_39 0x44400002 -+MPP32: ge1:txctl ? (unused) -+MPP33: gpio ? (pic_com0) -+MPP34: gpio x rear button (pic_com1) -+MPP35: gpio ? (pic_com2) -+MPP36: gpio ? (unused) -+MPP37: sd0:d3 x sd0 -+MPP38: sd0:d0 x sd0 -+MPP39: sd0:d1 x sd0 -++#define A38x_CUSTOMER_BOARD_1_MPP40_47 0x41144004 -+MPP40: sd0:d2 x sd0 -+MPP41: gpio x switch reset -+MPP42: gpio ? sw1-1 -+MPP43: spi1:cs2 x mikro cs -+MPP44: sata3:prsnt ? (unused) -+MPP45: ref:clk_out0 ? -+MPP46: ref:clk_out1 x switch clk -+MPP47: 4 ? (unused) -++#define A38x_CUSTOMER_BOARD_1_MPP48_55 0x40333333 -+MPP48: tdm:pclk -+MPP49: tdm:fsync -+MPP50: tdm:drx -+MPP51: tdm:dtx -+MPP52: tdm:int -+MPP53: tdm:rst -+MPP54: gpio ? (pwm) -+MPP55: spi1:cs1 x slic -++#define A38x_CUSTOMER_BOARD_1_MPP56_63 0x00004444 -+MPP56: spi1:mosi x mikro mosi -+MPP57: spi1:sck x mikro sck -+MPP58: spi1:miso x mikro miso -+MPP59: spi1:cs0 x w25q32 -+*/ diff --git a/target/linux/mvebu/patches-4.14/420-rtc-armada38x-add-support-for-trimming-the-RTC.patch b/target/linux/mvebu/patches-4.14/420-rtc-armada38x-add-support-for-trimming-the-RTC.patch deleted file mode 100644 index 2974a69760..0000000000 --- a/target/linux/mvebu/patches-4.14/420-rtc-armada38x-add-support-for-trimming-the-RTC.patch +++ /dev/null @@ -1,143 +0,0 @@ -commit f94ffbc2c2a4128c4412bb483d0807722dfb682b -Author: Russell King <rmk+kernel@armlinux.org.uk> -Date: Fri Sep 29 11:23:31 2017 +0100 - - rtc: armada38x: add support for trimming the RTC - - Add support for trimming the RTC using the offset mechanism. This RTC - supports two modes: low update mode and high update mode. Low update - mode has finer precision than high update mode, so we use the low mode - where possible. - - Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> - Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> - ---- a/drivers/rtc/rtc-armada38x.c -+++ b/drivers/rtc/rtc-armada38x.c -@@ -28,6 +28,8 @@ - #define RTC_IRQ_AL_EN BIT(0) - #define RTC_IRQ_FREQ_EN BIT(1) - #define RTC_IRQ_FREQ_1HZ BIT(2) -+#define RTC_CCR 0x18 -+#define RTC_CCR_MODE BIT(15) - - #define RTC_TIME 0xC - #define RTC_ALARM1 0x10 -@@ -343,18 +345,117 @@ static irqreturn_t armada38x_rtc_alarm_i - return IRQ_HANDLED; - } - -+/* -+ * The information given in the Armada 388 functional spec is complex. -+ * They give two different formulas for calculating the offset value, -+ * but when considering "Offset" as an 8-bit signed integer, they both -+ * reduce down to (we shall rename "Offset" as "val" here): -+ * -+ * val = (f_ideal / f_measured - 1) / resolution where f_ideal = 32768 -+ * -+ * Converting to time, f = 1/t: -+ * val = (t_measured / t_ideal - 1) / resolution where t_ideal = 1/32768 -+ * -+ * => t_measured / t_ideal = val * resolution + 1 -+ * -+ * "offset" in the RTC interface is defined as: -+ * t = t0 * (1 + offset * 1e-9) -+ * where t is the desired period, t0 is the measured period with a zero -+ * offset, which is t_measured above. With t0 = t_measured and t = t_ideal, -+ * offset = (t_ideal / t_measured - 1) / 1e-9 -+ * -+ * => t_ideal / t_measured = offset * 1e-9 + 1 -+ * -+ * so: -+ * -+ * offset * 1e-9 + 1 = 1 / (val * resolution + 1) -+ * -+ * We want "resolution" to be an integer, so resolution = R * 1e-9, giving -+ * offset = 1e18 / (val * R + 1e9) - 1e9 -+ * val = (1e18 / (offset + 1e9) - 1e9) / R -+ * with a common transformation: -+ * f(x) = 1e18 / (x + 1e9) - 1e9 -+ * offset = f(val * R) -+ * val = f(offset) / R -+ * -+ * Armada 38x supports two modes, fine mode (954ppb) and coarse mode (3815ppb). -+ */ -+static long armada38x_ppb_convert(long ppb) -+{ -+ long div = ppb + 1000000000L; -+ -+ return div_s64(1000000000000000000LL + div / 2, div) - 1000000000L; -+} -+ -+static int armada38x_rtc_read_offset(struct device *dev, long *offset) -+{ -+ struct armada38x_rtc *rtc = dev_get_drvdata(dev); -+ unsigned long ccr, flags; -+ long ppb_cor; -+ -+ spin_lock_irqsave(&rtc->lock, flags); -+ ccr = rtc->data->read_rtc_reg(rtc, RTC_CCR); -+ spin_unlock_irqrestore(&rtc->lock, flags); -+ -+ ppb_cor = (ccr & RTC_CCR_MODE ? 3815 : 954) * (s8)ccr; -+ /* ppb_cor + 1000000000L can never be zero */ -+ *offset = armada38x_ppb_convert(ppb_cor); -+ -+ return 0; -+} -+ -+static int armada38x_rtc_set_offset(struct device *dev, long offset) -+{ -+ struct armada38x_rtc *rtc = dev_get_drvdata(dev); -+ unsigned long ccr = 0; -+ long ppb_cor, off; -+ -+ /* -+ * The maximum ppb_cor is -128 * 3815 .. 127 * 3815, but we -+ * need to clamp the input. This equates to -484270 .. 488558. -+ * Not only is this to stop out of range "off" but also to -+ * avoid the division by zero in armada38x_ppb_convert(). -+ */ -+ offset = clamp(offset, -484270L, 488558L); -+ -+ ppb_cor = armada38x_ppb_convert(offset); -+ -+ /* -+ * Use low update mode where possible, which gives a better -+ * resolution of correction. -+ */ -+ off = DIV_ROUND_CLOSEST(ppb_cor, 954); -+ if (off > 127 || off < -128) { -+ ccr = RTC_CCR_MODE; -+ off = DIV_ROUND_CLOSEST(ppb_cor, 3815); -+ } -+ -+ /* -+ * Armada 388 requires a bit pattern in bits 14..8 depending on -+ * the sign bit: { 0, ~S, S, S, S, S, S } -+ */ -+ ccr |= (off & 0x3fff) ^ 0x2000; -+ rtc_delayed_write(ccr, rtc, RTC_CCR); -+ -+ return 0; -+} -+ - static const struct rtc_class_ops armada38x_rtc_ops = { - .read_time = armada38x_rtc_read_time, - .set_time = armada38x_rtc_set_time, - .read_alarm = armada38x_rtc_read_alarm, - .set_alarm = armada38x_rtc_set_alarm, - .alarm_irq_enable = armada38x_rtc_alarm_irq_enable, -+ .read_offset = armada38x_rtc_read_offset, -+ .set_offset = armada38x_rtc_set_offset, - }; - - static const struct rtc_class_ops armada38x_rtc_ops_noirq = { - .read_time = armada38x_rtc_read_time, - .set_time = armada38x_rtc_set_time, - .read_alarm = armada38x_rtc_read_alarm, -+ .read_offset = armada38x_rtc_read_offset, -+ .set_offset = armada38x_rtc_set_offset, - }; - - static const struct armada38x_rtc_data armada38x_data = { diff --git a/target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch b/target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch deleted file mode 100644 index 885e3d7c5e..0000000000 --- a/target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 1a990fefb641398fb580a0ea0be99b0ff27cbb9b Mon Sep 17 00:00:00 2001 -From: Baruch Siach <baruch@tkos.co.il> -Date: Thu, 21 Jun 2018 20:40:23 +0300 -Subject: [PATCH] rtc: armada38x: reset after rtc power loss - -When the RTC block looses power it needs a reset sequence to make it -usable again. Otherwise, writes to the time register have no effect. - -This reset sequence combines information from the mvebu_rtc driver in -the Marvell provided U-Boot, and the SolidRun provided U-Boot repo. - -Tested on the Armada 388 based SolidRun Clearfog Base. - -Signed-off-by: Baruch Siach <baruch@tkos.co.il> -Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> -Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> ---- - drivers/rtc/rtc-armada38x.c | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/drivers/rtc/rtc-armada38x.c -+++ b/drivers/rtc/rtc-armada38x.c -@@ -30,6 +30,8 @@ - #define RTC_IRQ_FREQ_1HZ BIT(2) - #define RTC_CCR 0x18 - #define RTC_CCR_MODE BIT(15) -+#define RTC_CONF_TEST 0x1C -+#define RTC_NOMINAL_TIMING BIT(13) - - #define RTC_TIME 0xC - #define RTC_ALARM1 0x10 -@@ -75,6 +77,7 @@ struct armada38x_rtc { - void __iomem *regs_soc; - spinlock_t lock; - int irq; -+ bool initialized; - struct value_to_freq *val_to_freq; - struct armada38x_rtc_data *data; - }; -@@ -226,6 +229,23 @@ static int armada38x_rtc_read_time(struc - return 0; - } - -+static void armada38x_rtc_reset(struct armada38x_rtc *rtc) -+{ -+ u32 reg; -+ -+ reg = rtc->data->read_rtc_reg(rtc, RTC_CONF_TEST); -+ /* If bits [7:0] are non-zero, assume RTC was uninitialized */ -+ if (reg & 0xff) { -+ rtc_delayed_write(0, rtc, RTC_CONF_TEST); -+ msleep(500); /* Oscillator startup time */ -+ rtc_delayed_write(0, rtc, RTC_TIME); -+ rtc_delayed_write(SOC_RTC_ALARM1 | SOC_RTC_ALARM2, rtc, -+ RTC_STATUS); -+ rtc_delayed_write(RTC_NOMINAL_TIMING, rtc, RTC_CCR); -+ } -+ rtc->initialized = true; -+} -+ - static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm) - { - struct armada38x_rtc *rtc = dev_get_drvdata(dev); -@@ -237,6 +257,9 @@ static int armada38x_rtc_set_time(struct - if (ret) - goto out; - -+ if (!rtc->initialized) -+ armada38x_rtc_reset(rtc); -+ - spin_lock_irqsave(&rtc->lock, flags); - rtc_delayed_write(time, rtc, RTC_TIME); - spin_unlock_irqrestore(&rtc->lock, flags); diff --git a/target/linux/mvebu/patches-4.14/423-ARM-dts-armada-385-linksys-Disable-internal-RTC.patch b/target/linux/mvebu/patches-4.14/423-ARM-dts-armada-385-linksys-Disable-internal-RTC.patch deleted file mode 100644 index 040d6590b5..0000000000 --- a/target/linux/mvebu/patches-4.14/423-ARM-dts-armada-385-linksys-Disable-internal-RTC.patch +++ /dev/null @@ -1,28 +0,0 @@ -From e1cac198fea08c31ec204bed84c279ab05d20389 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sat, 17 Mar 2018 15:22:25 +0100 -Subject: ARM: dts: armada-385-linksys: Disable internal RTC - -The internal RTC does not work correctly on these Linksys boards based -on Marvell SoCs. For me it only shows Wed Dec 31 23:59:59 1969 and for -others it is off by 3 minutes in 10 minutes running, this was reported -by multiple users. On the Linksys Mamba device the device tree comment -says that no crystal is connected to the internal RTC, this is probably -also true for the other devices. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/boot/dts/armada-385-linksys.dtsi | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi -@@ -304,3 +304,8 @@ - status = "okay"; - usb-phy = <&usb3_1_phy>; - }; -+ -+&rtc { -+ /* No crystal connected to the internal RTC */ -+ status = "disabled"; -+}; diff --git a/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch b/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch deleted file mode 100644 index b874d8265a..0000000000 --- a/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 28baa5e2635285b178326b301f534ed95c65dd01 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> -Date: Thu, 29 Sep 2016 11:44:39 +0200 -Subject: [PATCH] sfp: retry phy probe if unsuccessful - -Some phys seem to take longer than 50 ms to come out of reset, so retry -until we find a phy. - -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- - drivers/net/phy/sfp.c | 38 +++++++++++++++++++++++++------------- - 1 file changed, 25 insertions(+), 13 deletions(-) - ---- a/drivers/net/phy/sfp.c -+++ b/drivers/net/phy/sfp.c -@@ -506,7 +506,7 @@ static void sfp_sm_phy_detach(struct sfp - sfp->mod_phy = NULL; - } - --static void sfp_sm_probe_phy(struct sfp *sfp) -+static int sfp_sm_probe_phy(struct sfp *sfp) - { - struct phy_device *phy; - int err; -@@ -516,11 +516,11 @@ static void sfp_sm_probe_phy(struct sfp - phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR); - if (phy == ERR_PTR(-ENODEV)) { - dev_info(sfp->dev, "no PHY detected\n"); -- return; -+ return -EAGAIN; - } - if (IS_ERR(phy)) { - dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy)); -- return; -+ return PTR_ERR(phy); - } - - err = sfp_add_phy(sfp->sfp_bus, phy); -@@ -528,11 +528,13 @@ static void sfp_sm_probe_phy(struct sfp - phy_device_remove(phy); - phy_device_free(phy); - dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err); -- return; -+ return err; - } - - sfp->mod_phy = phy; - phy_start(phy); -+ -+ return 0; - } - - static void sfp_sm_link_up(struct sfp *sfp) -@@ -578,14 +580,9 @@ static void sfp_sm_fault(struct sfp *sfp - - static void sfp_sm_mod_init(struct sfp *sfp) - { -- sfp_module_tx_enable(sfp); -+ int ret = 0; - -- /* Wait t_init before indicating that the link is up, provided the -- * current state indicates no TX_FAULT. If TX_FAULT clears before -- * this time, that's fine too. -- */ -- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES); -- sfp->sm_retries = 5; -+ sfp_module_tx_enable(sfp); - - /* Setting the serdes link mode is guesswork: there's no - * field in the EEPROM which indicates what mode should -@@ -599,7 +596,22 @@ static void sfp_sm_mod_init(struct sfp * - if (sfp->id.base.e1000_base_t || - sfp->id.base.e100_base_lx || - sfp->id.base.e100_base_fx) -- sfp_sm_probe_phy(sfp); -+ ret = sfp_sm_probe_phy(sfp); -+ -+ if (!ret) { -+ /* Wait t_init before indicating that the link is up, provided -+ * the current state indicates no TX_FAULT. If TX_FAULT clears -+ * this time, that's fine too. -+ */ -+ sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES); -+ sfp->sm_retries = 5; -+ return; -+ } -+ -+ if (ret == -EAGAIN) -+ sfp_sm_set_timer(sfp, T_PROBE_RETRY); -+ else -+ sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0); - } - - static int sfp_sm_mod_probe(struct sfp *sfp) diff --git a/target/linux/mvebu/patches-4.14/501-spi-a3700-Change-SPI-mode-before-asserting-chip-sele.patch b/target/linux/mvebu/patches-4.14/501-spi-a3700-Change-SPI-mode-before-asserting-chip-sele.patch deleted file mode 100644 index 3ac7091188..0000000000 --- a/target/linux/mvebu/patches-4.14/501-spi-a3700-Change-SPI-mode-before-asserting-chip-sele.patch +++ /dev/null @@ -1,70 +0,0 @@ -From dd7aa8d4b53b3484ba31ba56f3ff1be7deb38530 Mon Sep 17 00:00:00 2001 -From: Maxime Chevallier <maxime.chevallier@smile.fr> -Date: Tue, 10 Oct 2017 10:43:18 +0200 -Subject: spi: a3700: Change SPI mode before asserting chip-select - -The spi device mode should be configured in the controller before the -chip-select is asserted, so that a clock polarity configuration change -is not interpreted as a clock tick by the device. - -This patch moves the mode setting to the 'prepare_message' function -instead of the 'transfer_one' function. - -By doing so, this patch also removes redundant code in -a3700_spi_clock_set. - -This was tested on EspressoBin board, with spidev. - -Signed-off-by: Maxime Chevallier <maxime.chevallier@smile.fr> -Signed-off-by: Mark Brown <broonie@kernel.org> ---- - drivers/spi/spi-armada-3700.c | 17 ++++------------- - 1 file changed, 4 insertions(+), 13 deletions(-) - ---- a/drivers/spi/spi-armada-3700.c -+++ b/drivers/spi/spi-armada-3700.c -@@ -214,7 +214,7 @@ static void a3700_spi_mode_set(struct a3 - } - - static void a3700_spi_clock_set(struct a3700_spi *a3700_spi, -- unsigned int speed_hz, u16 mode) -+ unsigned int speed_hz) - { - u32 val; - u32 prescale; -@@ -239,17 +239,6 @@ static void a3700_spi_clock_set(struct a - val |= A3700_SPI_CLK_CAPT_EDGE; - spireg_write(a3700_spi, A3700_SPI_IF_TIME_REG, val); - } -- -- val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG); -- val &= ~(A3700_SPI_CLK_POL | A3700_SPI_CLK_PHA); -- -- if (mode & SPI_CPOL) -- val |= A3700_SPI_CLK_POL; -- -- if (mode & SPI_CPHA) -- val |= A3700_SPI_CLK_PHA; -- -- spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val); - } - - static void a3700_spi_bytelen_set(struct a3700_spi *a3700_spi, unsigned int len) -@@ -431,7 +420,7 @@ static void a3700_spi_transfer_setup(str - - a3700_spi = spi_master_get_devdata(spi->master); - -- a3700_spi_clock_set(a3700_spi, xfer->speed_hz, spi->mode); -+ a3700_spi_clock_set(a3700_spi, xfer->speed_hz); - - byte_len = xfer->bits_per_word >> 3; - -@@ -592,6 +581,8 @@ static int a3700_spi_prepare_message(str - - a3700_spi_bytelen_set(a3700_spi, 4); - -+ a3700_spi_mode_set(a3700_spi, spi->mode); -+ - return 0; - } - diff --git a/target/linux/mvebu/patches-4.14/502-arm64-dts-marvell-armada-37xx-add-UART-clock.patch b/target/linux/mvebu/patches-4.14/502-arm64-dts-marvell-armada-37xx-add-UART-clock.patch deleted file mode 100644 index 47e0751c5f..0000000000 --- a/target/linux/mvebu/patches-4.14/502-arm64-dts-marvell-armada-37xx-add-UART-clock.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 2ff0d0b5bb397c3dc5c9b97bd0f20948f0b77740 Mon Sep 17 00:00:00 2001 -From: Miquel Raynal <miquel.raynal@free-electrons.com> -Date: Fri, 13 Oct 2017 11:01:57 +0200 -Subject: arm64: dts: marvell: armada-37xx: add UART clock - -Add the missing clock property to armada-3700 UART node. - -This clock will be used to derive the prescaler value to comply with -the requested baudrate. - -Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> -Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> -Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> ---- - arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -@@ -135,6 +135,7 @@ - uart0: serial@12000 { - compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x200>; -+ clocks = <&xtalclk>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; diff --git a/target/linux/mvebu/patches-4.14/503-clk-mvebu-armada-37xx-periph-cosmetic-changes.patch b/target/linux/mvebu/patches-4.14/503-clk-mvebu-armada-37xx-periph-cosmetic-changes.patch deleted file mode 100644 index 7343e01d19..0000000000 --- a/target/linux/mvebu/patches-4.14/503-clk-mvebu-armada-37xx-periph-cosmetic-changes.patch +++ /dev/null @@ -1,78 +0,0 @@ -From adf4e289dd7f801c3fe12e0e6b491e11e548cd3d Mon Sep 17 00:00:00 2001 -From: Gregory CLEMENT <gregory.clement@free-electrons.com> -Date: Thu, 30 Nov 2017 14:40:27 +0100 -Subject: clk: mvebu: armada-37xx-periph: cosmetic changes - -This patches fixes few cosmetic issues such as alignment, blank lines -and required space. - -Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> -Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> ---- - drivers/clk/mvebu/armada-37xx-periph.c | 17 +++++++++-------- - 1 file changed, 9 insertions(+), 8 deletions(-) - ---- a/drivers/clk/mvebu/armada-37xx-periph.c -+++ b/drivers/clk/mvebu/armada-37xx-periph.c -@@ -79,6 +79,7 @@ static const struct clk_div_table clk_ta - { .val = 1, .div = 4, }, - { .val = 0, .div = 0, }, /* last entry */ - }; -+ - static const struct clk_ops clk_double_div_ops; - - #define PERIPH_GATE(_name, _bit) \ -@@ -217,7 +218,7 @@ PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL - PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19); - PERIPH_CLK_MUX_DIV(cpu, 22, DIV_SEL0, 28, clk_table6); - --static struct clk_periph_data data_nb[] ={ -+static struct clk_periph_data data_nb[] = { - REF_CLK_FULL_DD(mmc), - REF_CLK_FULL_DD(sata_host), - REF_CLK_FULL_DD(sec_at), -@@ -281,7 +282,7 @@ static unsigned int get_div(void __iomem - } - - static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw, -- unsigned long parent_rate) -+ unsigned long parent_rate) - { - struct clk_double_div *double_div = to_clk_double_div(hw); - unsigned int div; -@@ -303,6 +304,7 @@ static const struct of_device_id armada_ - .data = data_sb, }, - { } - }; -+ - static int armada_3700_add_composite_clk(const struct clk_periph_data *data, - void __iomem *reg, spinlock_t *lock, - struct device *dev, struct clk_hw **hw) -@@ -355,9 +357,9 @@ static int armada_3700_add_composite_clk - } - - *hw = clk_hw_register_composite(dev, data->name, data->parent_names, -- data->num_parents, mux_hw, -- mux_ops, rate_hw, rate_ops, -- gate_hw, gate_ops, CLK_IGNORE_UNUSED); -+ data->num_parents, mux_hw, -+ mux_ops, rate_hw, rate_ops, -+ gate_hw, gate_ops, CLK_IGNORE_UNUSED); - - if (IS_ERR(*hw)) - return PTR_ERR(*hw); -@@ -406,12 +408,11 @@ static int armada_3700_periph_clock_prob - if (armada_3700_add_composite_clk(&data[i], reg, - &driver_data->lock, dev, hw)) - dev_err(dev, "Can't register periph clock %s\n", -- data[i].name); -- -+ data[i].name); - } - - ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, -- driver_data->hw_data); -+ driver_data->hw_data); - if (ret) { - for (i = 0; i < num_periph; i++) - clk_hw_unregister(driver_data->hw_data->hws[i]); diff --git a/target/linux/mvebu/patches-4.14/504-clk-mvebu-armada-37xx-periph-prepare-cpu-clk-to-be-u.patch b/target/linux/mvebu/patches-4.14/504-clk-mvebu-armada-37xx-periph-prepare-cpu-clk-to-be-u.patch deleted file mode 100644 index f9dec9f2ee..0000000000 --- a/target/linux/mvebu/patches-4.14/504-clk-mvebu-armada-37xx-periph-prepare-cpu-clk-to-be-u.patch +++ /dev/null @@ -1,178 +0,0 @@ -From 9818a7a4fd10f72537cdf2a5ec3402f2c245ea24 Mon Sep 17 00:00:00 2001 -From: Gregory CLEMENT <gregory.clement@free-electrons.com> -Date: Thu, 30 Nov 2017 14:40:28 +0100 -Subject: clk: mvebu: armada-37xx-periph: prepare cpu clk to be - used with DVFS - -When DVFS will be enabled then the cpu clk will use a different set of -register at run time. That means that we won't be able to use the common -callback and need to use our own ones. - -This patch prepares this change by switching on our own set of callbacks -without modifying the behavior of the clocks. - -Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> -Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> ---- - drivers/clk/mvebu/armada-37xx-periph.c | 82 ++++++++++++++++++++++++++++++---- - 1 file changed, 73 insertions(+), 9 deletions(-) - ---- a/drivers/clk/mvebu/armada-37xx-periph.c -+++ b/drivers/clk/mvebu/armada-37xx-periph.c -@@ -46,7 +46,17 @@ struct clk_double_div { - u8 shift2; - }; - -+struct clk_pm_cpu { -+ struct clk_hw hw; -+ void __iomem *reg_mux; -+ u8 shift_mux; -+ u32 mask_mux; -+ void __iomem *reg_div; -+ u8 shift_div; -+}; -+ - #define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw) -+#define to_clk_pm_cpu(_hw) container_of(_hw, struct clk_pm_cpu, hw) - - struct clk_periph_data { - const char *name; -@@ -55,6 +65,7 @@ struct clk_periph_data { - struct clk_hw *mux_hw; - struct clk_hw *rate_hw; - struct clk_hw *gate_hw; -+ struct clk_hw *muxrate_hw; - bool is_double_div; - }; - -@@ -81,6 +92,7 @@ static const struct clk_div_table clk_ta - }; - - static const struct clk_ops clk_double_div_ops; -+static const struct clk_ops clk_pm_cpu_ops; - - #define PERIPH_GATE(_name, _bit) \ - struct clk_gate gate_##_name = { \ -@@ -122,6 +134,18 @@ struct clk_divider rate_##_name = { \ - } \ - }; - -+#define PERIPH_PM_CPU(_name, _shift1, _reg, _shift2) \ -+struct clk_pm_cpu muxrate_##_name = { \ -+ .reg_mux = (void *)TBG_SEL, \ -+ .mask_mux = 3, \ -+ .shift_mux = _shift1, \ -+ .reg_div = (void *)_reg, \ -+ .shift_div = _shift2, \ -+ .hw.init = &(struct clk_init_data){ \ -+ .ops = &clk_pm_cpu_ops, \ -+ } \ -+}; -+ - #define PERIPH_CLK_FULL_DD(_name, _bit, _shift, _reg1, _reg2, _shift1, _shift2)\ - static PERIPH_GATE(_name, _bit); \ - static PERIPH_MUX(_name, _shift); \ -@@ -136,10 +160,6 @@ static PERIPH_DIV(_name, _reg, _shift1, - static PERIPH_GATE(_name, _bit); \ - static PERIPH_DIV(_name, _reg, _shift, _table); - --#define PERIPH_CLK_MUX_DIV(_name, _shift, _reg, _shift_div, _table) \ --static PERIPH_MUX(_name, _shift); \ --static PERIPH_DIV(_name, _reg, _shift_div, _table); -- - #define PERIPH_CLK_MUX_DD(_name, _shift, _reg1, _reg2, _shift1, _shift2)\ - static PERIPH_MUX(_name, _shift); \ - static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2); -@@ -180,13 +200,12 @@ static PERIPH_DOUBLEDIV(_name, _reg1, _r - .rate_hw = &rate_##_name.hw, \ - } - --#define REF_CLK_MUX_DIV(_name) \ -+#define REF_CLK_PM_CPU(_name) \ - { .name = #_name, \ - .parent_names = (const char *[]){ "TBG-A-P", \ - "TBG-B-P", "TBG-A-S", "TBG-B-S"}, \ - .num_parents = 4, \ -- .mux_hw = &mux_##_name.hw, \ -- .rate_hw = &rate_##_name.hw, \ -+ .muxrate_hw = &muxrate_##_name.hw, \ - } - - #define REF_CLK_MUX_DD(_name) \ -@@ -216,7 +235,7 @@ PERIPH_CLK_FULL_DD(ddr_fclk, 21, 16, DIV - PERIPH_CLK_FULL(trace, 22, 18, DIV_SEL0, 20, clk_table6); - PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL0, 23, clk_table6); - PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19); --PERIPH_CLK_MUX_DIV(cpu, 22, DIV_SEL0, 28, clk_table6); -+static PERIPH_PM_CPU(cpu, 22, DIV_SEL0, 28); - - static struct clk_periph_data data_nb[] = { - REF_CLK_FULL_DD(mmc), -@@ -235,7 +254,7 @@ static struct clk_periph_data data_nb[] - REF_CLK_FULL(trace), - REF_CLK_FULL(counter), - REF_CLK_FULL_DD(eip97), -- REF_CLK_MUX_DIV(cpu), -+ REF_CLK_PM_CPU(cpu), - { }, - }; - -@@ -297,6 +316,37 @@ static const struct clk_ops clk_double_d - .recalc_rate = clk_double_div_recalc_rate, - }; - -+static u8 clk_pm_cpu_get_parent(struct clk_hw *hw) -+{ -+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); -+ int num_parents = clk_hw_get_num_parents(hw); -+ u32 val; -+ -+ val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux; -+ val &= pm_cpu->mask_mux; -+ -+ if (val >= num_parents) -+ return -EINVAL; -+ -+ return val; -+} -+ -+static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); -+ unsigned int div; -+ -+ div = get_div(pm_cpu->reg_div, pm_cpu->shift_div); -+ -+ return DIV_ROUND_UP_ULL((u64)parent_rate, div); -+} -+ -+static const struct clk_ops clk_pm_cpu_ops = { -+ .get_parent = clk_pm_cpu_get_parent, -+ .recalc_rate = clk_pm_cpu_recalc_rate, -+}; -+ - static const struct of_device_id armada_3700_periph_clock_of_match[] = { - { .compatible = "marvell,armada-3700-periph-clock-nb", - .data = data_nb, }, -@@ -356,6 +406,20 @@ static int armada_3700_add_composite_clk - } - } - -+ if (data->muxrate_hw) { -+ struct clk_pm_cpu *pmcpu_clk; -+ struct clk_hw *muxrate_hw = data->muxrate_hw; -+ -+ pmcpu_clk = to_clk_pm_cpu(muxrate_hw); -+ pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux; -+ pmcpu_clk->reg_div = reg + (u64)pmcpu_clk->reg_div; -+ -+ mux_hw = muxrate_hw; -+ rate_hw = muxrate_hw; -+ mux_ops = muxrate_hw->init->ops; -+ rate_ops = muxrate_hw->init->ops; -+ } -+ - *hw = clk_hw_register_composite(dev, data->name, data->parent_names, - data->num_parents, mux_hw, - mux_ops, rate_hw, rate_ops, diff --git a/target/linux/mvebu/patches-4.14/505-clk-mvebu-armada-37xx-periph-add-DVFS-support-for-cp.patch b/target/linux/mvebu/patches-4.14/505-clk-mvebu-armada-37xx-periph-add-DVFS-support-for-cp.patch deleted file mode 100644 index 2065e788af..0000000000 --- a/target/linux/mvebu/patches-4.14/505-clk-mvebu-armada-37xx-periph-add-DVFS-support-for-cp.patch +++ /dev/null @@ -1,315 +0,0 @@ -From 2089dc33ea0e3917465929d4020fbff3d6dbf7f4 Mon Sep 17 00:00:00 2001 -From: Gregory CLEMENT <gregory.clement@free-electrons.com> -Date: Thu, 30 Nov 2017 14:40:29 +0100 -Subject: clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks - -When DVFS is enabled the CPU clock setting is done using an other set of -registers. - -These Power Management registers are exposed through a syscon as they -will also be used by other drivers such as the cpufreq. - -This patch add the possibility to modify the CPU frequency using the -associate load level matching the target frequency. Then all the -frequency switch is handle by the hardware. - -Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> -[sboyd@codeaurora.org: Grow a local variable for regmap pointer -to keep lines shorter] -Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> ---- - drivers/clk/mvebu/armada-37xx-periph.c | 221 ++++++++++++++++++++++++++++++++- - 1 file changed, 217 insertions(+), 4 deletions(-) - ---- a/drivers/clk/mvebu/armada-37xx-periph.c -+++ b/drivers/clk/mvebu/armada-37xx-periph.c -@@ -21,9 +21,11 @@ - */ - - #include <linux/clk-provider.h> -+#include <linux/mfd/syscon.h> - #include <linux/of.h> - #include <linux/of_device.h> - #include <linux/platform_device.h> -+#include <linux/regmap.h> - #include <linux/slab.h> - - #define TBG_SEL 0x0 -@@ -33,6 +35,26 @@ - #define CLK_SEL 0x10 - #define CLK_DIS 0x14 - -+#define LOAD_LEVEL_NR 4 -+ -+#define ARMADA_37XX_NB_L0L1 0x18 -+#define ARMADA_37XX_NB_L2L3 0x1C -+#define ARMADA_37XX_NB_TBG_DIV_OFF 13 -+#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7 -+#define ARMADA_37XX_NB_CLK_SEL_OFF 11 -+#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1 -+#define ARMADA_37XX_NB_TBG_SEL_OFF 9 -+#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3 -+#define ARMADA_37XX_NB_CONFIG_SHIFT 16 -+#define ARMADA_37XX_NB_DYN_MOD 0x24 -+#define ARMADA_37XX_NB_DFS_EN 31 -+#define ARMADA_37XX_NB_CPU_LOAD 0x30 -+#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3 -+#define ARMADA_37XX_DVFS_LOAD_0 0 -+#define ARMADA_37XX_DVFS_LOAD_1 1 -+#define ARMADA_37XX_DVFS_LOAD_2 2 -+#define ARMADA_37XX_DVFS_LOAD_3 3 -+ - struct clk_periph_driver_data { - struct clk_hw_onecell_data *hw_data; - spinlock_t lock; -@@ -53,6 +75,7 @@ struct clk_pm_cpu { - u32 mask_mux; - void __iomem *reg_div; - u8 shift_div; -+ struct regmap *nb_pm_base; - }; - - #define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw) -@@ -316,14 +339,94 @@ static const struct clk_ops clk_double_d - .recalc_rate = clk_double_div_recalc_rate, - }; - -+static void armada_3700_pm_dvfs_update_regs(unsigned int load_level, -+ unsigned int *reg, -+ unsigned int *offset) -+{ -+ if (load_level <= ARMADA_37XX_DVFS_LOAD_1) -+ *reg = ARMADA_37XX_NB_L0L1; -+ else -+ *reg = ARMADA_37XX_NB_L2L3; -+ -+ if (load_level == ARMADA_37XX_DVFS_LOAD_0 || -+ load_level == ARMADA_37XX_DVFS_LOAD_2) -+ *offset += ARMADA_37XX_NB_CONFIG_SHIFT; -+} -+ -+static bool armada_3700_pm_dvfs_is_enabled(struct regmap *base) -+{ -+ unsigned int val, reg = ARMADA_37XX_NB_DYN_MOD; -+ -+ if (IS_ERR(base)) -+ return false; -+ -+ regmap_read(base, reg, &val); -+ -+ return !!(val & BIT(ARMADA_37XX_NB_DFS_EN)); -+} -+ -+static unsigned int armada_3700_pm_dvfs_get_cpu_div(struct regmap *base) -+{ -+ unsigned int reg = ARMADA_37XX_NB_CPU_LOAD; -+ unsigned int offset = ARMADA_37XX_NB_TBG_DIV_OFF; -+ unsigned int load_level, div; -+ -+ /* -+ * This function is always called after the function -+ * armada_3700_pm_dvfs_is_enabled, so no need to check again -+ * if the base is valid. -+ */ -+ regmap_read(base, reg, &load_level); -+ -+ /* -+ * The register and the offset inside this register accessed to -+ * read the current divider depend on the load level -+ */ -+ load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK; -+ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); -+ -+ regmap_read(base, reg, &div); -+ -+ return (div >> offset) & ARMADA_37XX_NB_TBG_DIV_MASK; -+} -+ -+static unsigned int armada_3700_pm_dvfs_get_cpu_parent(struct regmap *base) -+{ -+ unsigned int reg = ARMADA_37XX_NB_CPU_LOAD; -+ unsigned int offset = ARMADA_37XX_NB_TBG_SEL_OFF; -+ unsigned int load_level, sel; -+ -+ /* -+ * This function is always called after the function -+ * armada_3700_pm_dvfs_is_enabled, so no need to check again -+ * if the base is valid -+ */ -+ regmap_read(base, reg, &load_level); -+ -+ /* -+ * The register and the offset inside this register accessed to -+ * read the current divider depend on the load level -+ */ -+ load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK; -+ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); -+ -+ regmap_read(base, reg, &sel); -+ -+ return (sel >> offset) & ARMADA_37XX_NB_TBG_SEL_MASK; -+} -+ - static u8 clk_pm_cpu_get_parent(struct clk_hw *hw) - { - struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); - int num_parents = clk_hw_get_num_parents(hw); - u32 val; - -- val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux; -- val &= pm_cpu->mask_mux; -+ if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) { -+ val = armada_3700_pm_dvfs_get_cpu_parent(pm_cpu->nb_pm_base); -+ } else { -+ val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux; -+ val &= pm_cpu->mask_mux; -+ } - - if (val >= num_parents) - return -EINVAL; -@@ -331,19 +434,124 @@ static u8 clk_pm_cpu_get_parent(struct c - return val; - } - -+static int clk_pm_cpu_set_parent(struct clk_hw *hw, u8 index) -+{ -+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); -+ struct regmap *base = pm_cpu->nb_pm_base; -+ int load_level; -+ -+ /* -+ * We set the clock parent only if the DVFS is available but -+ * not enabled. -+ */ -+ if (IS_ERR(base) || armada_3700_pm_dvfs_is_enabled(base)) -+ return -EINVAL; -+ -+ /* Set the parent clock for all the load level */ -+ for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) { -+ unsigned int reg, mask, val, -+ offset = ARMADA_37XX_NB_TBG_SEL_OFF; -+ -+ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); -+ -+ val = index << offset; -+ mask = ARMADA_37XX_NB_TBG_SEL_MASK << offset; -+ regmap_update_bits(base, reg, mask, val); -+ } -+ return 0; -+} -+ - static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) - { - struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); - unsigned int div; - -- div = get_div(pm_cpu->reg_div, pm_cpu->shift_div); -- -+ if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) -+ div = armada_3700_pm_dvfs_get_cpu_div(pm_cpu->nb_pm_base); -+ else -+ div = get_div(pm_cpu->reg_div, pm_cpu->shift_div); - return DIV_ROUND_UP_ULL((u64)parent_rate, div); - } - -+static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *parent_rate) -+{ -+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); -+ struct regmap *base = pm_cpu->nb_pm_base; -+ unsigned int div = *parent_rate / rate; -+ unsigned int load_level; -+ /* only available when DVFS is enabled */ -+ if (!armada_3700_pm_dvfs_is_enabled(base)) -+ return -EINVAL; -+ -+ for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) { -+ unsigned int reg, val, offset = ARMADA_37XX_NB_TBG_DIV_OFF; -+ -+ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); -+ -+ regmap_read(base, reg, &val); -+ -+ val >>= offset; -+ val &= ARMADA_37XX_NB_TBG_DIV_MASK; -+ if (val == div) -+ /* -+ * We found a load level matching the target -+ * divider, switch to this load level and -+ * return. -+ */ -+ return *parent_rate / div; -+ } -+ -+ /* We didn't find any valid divider */ -+ return -EINVAL; -+} -+ -+static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); -+ struct regmap *base = pm_cpu->nb_pm_base; -+ unsigned int div = parent_rate / rate; -+ unsigned int load_level; -+ -+ /* only available when DVFS is enabled */ -+ if (!armada_3700_pm_dvfs_is_enabled(base)) -+ return -EINVAL; -+ -+ for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) { -+ unsigned int reg, mask, val, -+ offset = ARMADA_37XX_NB_TBG_DIV_OFF; -+ -+ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); -+ -+ regmap_read(base, reg, &val); -+ val >>= offset; -+ val &= ARMADA_37XX_NB_TBG_DIV_MASK; -+ -+ if (val == div) { -+ /* -+ * We found a load level matching the target -+ * divider, switch to this load level and -+ * return. -+ */ -+ reg = ARMADA_37XX_NB_CPU_LOAD; -+ mask = ARMADA_37XX_NB_CPU_LOAD_MASK; -+ regmap_update_bits(base, reg, mask, load_level); -+ -+ return rate; -+ } -+ } -+ -+ /* We didn't find any valid divider */ -+ return -EINVAL; -+} -+ - static const struct clk_ops clk_pm_cpu_ops = { - .get_parent = clk_pm_cpu_get_parent, -+ .set_parent = clk_pm_cpu_set_parent, -+ .round_rate = clk_pm_cpu_round_rate, -+ .set_rate = clk_pm_cpu_set_rate, - .recalc_rate = clk_pm_cpu_recalc_rate, - }; - -@@ -409,6 +617,7 @@ static int armada_3700_add_composite_clk - if (data->muxrate_hw) { - struct clk_pm_cpu *pmcpu_clk; - struct clk_hw *muxrate_hw = data->muxrate_hw; -+ struct regmap *map; - - pmcpu_clk = to_clk_pm_cpu(muxrate_hw); - pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux; -@@ -418,6 +627,10 @@ static int armada_3700_add_composite_clk - rate_hw = muxrate_hw; - mux_ops = muxrate_hw->init->ops; - rate_ops = muxrate_hw->init->ops; -+ -+ map = syscon_regmap_lookup_by_compatible( -+ "marvell,armada-3700-nb-pm"); -+ pmcpu_clk->nb_pm_base = map; - } - - *hw = clk_hw_register_composite(dev, data->name, data->parent_names, diff --git a/target/linux/mvebu/patches-4.14/506-cpufreq-Add-DVFS-support-for-Armada-37xx.patch b/target/linux/mvebu/patches-4.14/506-cpufreq-Add-DVFS-support-for-Armada-37xx.patch deleted file mode 100644 index 11562c582b..0000000000 --- a/target/linux/mvebu/patches-4.14/506-cpufreq-Add-DVFS-support-for-Armada-37xx.patch +++ /dev/null @@ -1,297 +0,0 @@ -From 92ce45fb875d7c3e021cc454482fe0687ff54f29 Mon Sep 17 00:00:00 2001 -From: Gregory CLEMENT <gregory.clement@free-electrons.com> -Date: Thu, 14 Dec 2017 16:00:05 +0100 -Subject: cpufreq: Add DVFS support for Armada 37xx - -This patch adds DVFS support for the Armada 37xx SoCs - -There are up to four CPU frequency loads for Armada 37xx controlled by -the hardware. - -This driver associates the CPU load level to a frequency, then the -hardware will switch while selecting a load level. - -The hardware also can associate a voltage for each level (AVS support) -but it is not yet supported - -Tested-by: Andre Heider <a.heider@gmail.com> -Acked-by: Viresh Kumar <viresh.kumar@linaro.org> -Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> -Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> ---- - drivers/cpufreq/Kconfig.arm | 7 + - drivers/cpufreq/Makefile | 1 + - drivers/cpufreq/armada-37xx-cpufreq.c | 241 ++++++++++++++++++++++++++++++++++ - 3 files changed, 249 insertions(+) - create mode 100644 drivers/cpufreq/armada-37xx-cpufreq.c - ---- a/drivers/cpufreq/Kconfig.arm -+++ b/drivers/cpufreq/Kconfig.arm -@@ -2,6 +2,13 @@ - # ARM CPU Frequency scaling drivers - # - -+config ARM_ARMADA_37XX_CPUFREQ -+ tristate "Armada 37xx CPUFreq support" -+ depends on ARCH_MVEBU -+ help -+ This adds the CPUFreq driver support for Marvell Armada 37xx SoCs. -+ The Armada 37xx PMU supports 4 frequency and VDD levels. -+ - # big LITTLE core layer and glue drivers - config ARM_BIG_LITTLE_CPUFREQ - tristate "Generic ARM big LITTLE CPUfreq driver" ---- a/drivers/cpufreq/Makefile -+++ b/drivers/cpufreq/Makefile -@@ -52,6 +52,7 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += - # LITTLE drivers, so that it is probed last. - obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o - -+obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o - obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o - obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o - obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o ---- /dev/null -+++ b/drivers/cpufreq/armada-37xx-cpufreq.c -@@ -0,0 +1,241 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * CPU frequency scaling support for Armada 37xx platform. -+ * -+ * Copyright (C) 2017 Marvell -+ * -+ * Gregory CLEMENT <gregory.clement@free-electrons.com> -+ */ -+ -+#include <linux/clk.h> -+#include <linux/cpu.h> -+#include <linux/cpufreq.h> -+#include <linux/err.h> -+#include <linux/interrupt.h> -+#include <linux/io.h> -+#include <linux/mfd/syscon.h> -+#include <linux/module.h> -+#include <linux/of_address.h> -+#include <linux/of_device.h> -+#include <linux/of_irq.h> -+#include <linux/platform_device.h> -+#include <linux/pm_opp.h> -+#include <linux/regmap.h> -+#include <linux/slab.h> -+ -+/* Power management in North Bridge register set */ -+#define ARMADA_37XX_NB_L0L1 0x18 -+#define ARMADA_37XX_NB_L2L3 0x1C -+#define ARMADA_37XX_NB_TBG_DIV_OFF 13 -+#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7 -+#define ARMADA_37XX_NB_CLK_SEL_OFF 11 -+#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1 -+#define ARMADA_37XX_NB_CLK_SEL_TBG 0x1 -+#define ARMADA_37XX_NB_TBG_SEL_OFF 9 -+#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3 -+#define ARMADA_37XX_NB_VDD_SEL_OFF 6 -+#define ARMADA_37XX_NB_VDD_SEL_MASK 0x3 -+#define ARMADA_37XX_NB_CONFIG_SHIFT 16 -+#define ARMADA_37XX_NB_DYN_MOD 0x24 -+#define ARMADA_37XX_NB_CLK_SEL_EN BIT(26) -+#define ARMADA_37XX_NB_TBG_EN BIT(28) -+#define ARMADA_37XX_NB_DIV_EN BIT(29) -+#define ARMADA_37XX_NB_VDD_EN BIT(30) -+#define ARMADA_37XX_NB_DFS_EN BIT(31) -+#define ARMADA_37XX_NB_CPU_LOAD 0x30 -+#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3 -+#define ARMADA_37XX_DVFS_LOAD_0 0 -+#define ARMADA_37XX_DVFS_LOAD_1 1 -+#define ARMADA_37XX_DVFS_LOAD_2 2 -+#define ARMADA_37XX_DVFS_LOAD_3 3 -+ -+/* -+ * On Armada 37xx the Power management manages 4 level of CPU load, -+ * each level can be associated with a CPU clock source, a CPU -+ * divider, a VDD level, etc... -+ */ -+#define LOAD_LEVEL_NR 4 -+ -+struct armada_37xx_dvfs { -+ u32 cpu_freq_max; -+ u8 divider[LOAD_LEVEL_NR]; -+}; -+ -+static struct armada_37xx_dvfs armada_37xx_dvfs[] = { -+ {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} }, -+ {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} }, -+ {.cpu_freq_max = 800*1000*1000, .divider = {1, 2, 3, 4} }, -+ {.cpu_freq_max = 600*1000*1000, .divider = {2, 4, 5, 6} }, -+}; -+ -+static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) { -+ if (freq == armada_37xx_dvfs[i].cpu_freq_max) -+ return &armada_37xx_dvfs[i]; -+ } -+ -+ pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000); -+ return NULL; -+} -+ -+/* -+ * Setup the four level managed by the hardware. Once the four level -+ * will be configured then the DVFS will be enabled. -+ */ -+static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base, -+ struct clk *clk, u8 *divider) -+{ -+ int load_lvl; -+ struct clk *parent; -+ -+ for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) { -+ unsigned int reg, mask, val, offset = 0; -+ -+ if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1) -+ reg = ARMADA_37XX_NB_L0L1; -+ else -+ reg = ARMADA_37XX_NB_L2L3; -+ -+ if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 || -+ load_lvl == ARMADA_37XX_DVFS_LOAD_2) -+ offset += ARMADA_37XX_NB_CONFIG_SHIFT; -+ -+ /* Set cpu clock source, for all the level we use TBG */ -+ val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF; -+ mask = (ARMADA_37XX_NB_CLK_SEL_MASK -+ << ARMADA_37XX_NB_CLK_SEL_OFF); -+ -+ /* -+ * Set cpu divider based on the pre-computed array in -+ * order to have balanced step. -+ */ -+ val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF; -+ mask |= (ARMADA_37XX_NB_TBG_DIV_MASK -+ << ARMADA_37XX_NB_TBG_DIV_OFF); -+ -+ /* Set VDD divider which is actually the load level. */ -+ val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF; -+ mask |= (ARMADA_37XX_NB_VDD_SEL_MASK -+ << ARMADA_37XX_NB_VDD_SEL_OFF); -+ -+ val <<= offset; -+ mask <<= offset; -+ -+ regmap_update_bits(base, reg, mask, val); -+ } -+ -+ /* -+ * Set cpu clock source, for all the level we keep the same -+ * clock source that the one already configured. For this one -+ * we need to use the clock framework -+ */ -+ parent = clk_get_parent(clk); -+ clk_set_parent(clk, parent); -+} -+ -+static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base) -+{ -+ unsigned int reg = ARMADA_37XX_NB_DYN_MOD, -+ mask = ARMADA_37XX_NB_DFS_EN; -+ -+ regmap_update_bits(base, reg, mask, 0); -+} -+ -+static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base) -+{ -+ unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD, -+ mask = ARMADA_37XX_NB_CPU_LOAD_MASK; -+ -+ /* Start with the highest load (0) */ -+ val = ARMADA_37XX_DVFS_LOAD_0; -+ regmap_update_bits(base, reg, mask, val); -+ -+ /* Now enable DVFS for the CPUs */ -+ reg = ARMADA_37XX_NB_DYN_MOD; -+ mask = ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN | -+ ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN | -+ ARMADA_37XX_NB_DFS_EN; -+ -+ regmap_update_bits(base, reg, mask, mask); -+} -+ -+static int __init armada37xx_cpufreq_driver_init(void) -+{ -+ struct armada_37xx_dvfs *dvfs; -+ struct platform_device *pdev; -+ unsigned int cur_frequency; -+ struct regmap *nb_pm_base; -+ struct device *cpu_dev; -+ int load_lvl, ret; -+ struct clk *clk; -+ -+ nb_pm_base = -+ syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm"); -+ -+ if (IS_ERR(nb_pm_base)) -+ return -ENODEV; -+ -+ /* Before doing any configuration on the DVFS first, disable it */ -+ armada37xx_cpufreq_disable_dvfs(nb_pm_base); -+ -+ /* -+ * On CPU 0 register the operating points supported (which are -+ * the nominal CPU frequency and full integer divisions of -+ * it). -+ */ -+ cpu_dev = get_cpu_device(0); -+ if (!cpu_dev) { -+ dev_err(cpu_dev, "Cannot get CPU\n"); -+ return -ENODEV; -+ } -+ -+ clk = clk_get(cpu_dev, 0); -+ if (IS_ERR(clk)) { -+ dev_err(cpu_dev, "Cannot get clock for CPU0\n"); -+ return PTR_ERR(clk); -+ } -+ -+ /* Get nominal (current) CPU frequency */ -+ cur_frequency = clk_get_rate(clk); -+ if (!cur_frequency) { -+ dev_err(cpu_dev, "Failed to get clock rate for CPU\n"); -+ return -EINVAL; -+ } -+ -+ dvfs = armada_37xx_cpu_freq_info_get(cur_frequency); -+ if (!dvfs) -+ return -EINVAL; -+ -+ armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider); -+ -+ for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR; -+ load_lvl++) { -+ unsigned long freq = cur_frequency / dvfs->divider[load_lvl]; -+ -+ ret = dev_pm_opp_add(cpu_dev, freq, 0); -+ if (ret) { -+ /* clean-up the already added opp before leaving */ -+ while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) { -+ freq = cur_frequency / dvfs->divider[load_lvl]; -+ dev_pm_opp_remove(cpu_dev, freq); -+ } -+ return ret; -+ } -+ } -+ -+ /* Now that everything is setup, enable the DVFS at hardware level */ -+ armada37xx_cpufreq_enable_dvfs(nb_pm_base); -+ -+ pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0); -+ -+ return PTR_ERR_OR_ZERO(pdev); -+} -+/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */ -+late_initcall(armada37xx_cpufreq_driver_init); -+ -+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>"); -+MODULE_DESCRIPTION("Armada 37xx cpufreq driver"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/mvebu/patches-4.14/507-arm64-dts-marvell-armada-37xx-add-nodes-allowing-cpu.patch b/target/linux/mvebu/patches-4.14/507-arm64-dts-marvell-armada-37xx-add-nodes-allowing-cpu.patch deleted file mode 100644 index dd3727c554..0000000000 --- a/target/linux/mvebu/patches-4.14/507-arm64-dts-marvell-armada-37xx-add-nodes-allowing-cpu.patch +++ /dev/null @@ -1,48 +0,0 @@ -From e8d66e7927b2a15310df0eb44a67d120ea147a59 Mon Sep 17 00:00:00 2001 -From: Gregory CLEMENT <gregory.clement@free-electrons.com> -Date: Thu, 14 Dec 2017 16:00:06 +0100 -Subject: arm64: dts: marvell: armada-37xx: add nodes allowing cpufreq - support - -In order to be able to use cpu freq, we need to associate a clock to each -CPU and to expose the power management registers. - -Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> ---- - arch/arm64/boot/dts/marvell/armada-372x.dtsi | 1 + - arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 7 +++++++ - 2 files changed, 8 insertions(+) - ---- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi -+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi -@@ -56,6 +56,7 @@ - device_type = "cpu"; - compatible = "arm,cortex-a53","arm,armv8"; - reg = <0x1>; -+ clocks = <&nb_periph_clk 16>; - enable-method = "psci"; - }; - }; ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -@@ -64,6 +64,7 @@ - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0>; -+ clocks = <&nb_periph_clk 16>; - enable-method = "psci"; - }; - }; -@@ -219,6 +220,12 @@ - }; - }; - -+ nb_pm: syscon@14000 { -+ compatible = "marvell,armada-3700-nb-pm", -+ "syscon"; -+ reg = <0x14000 0x60>; -+ }; -+ - pinctrl_sb: pinctrl@18800 { - compatible = "marvell,armada3710-sb-pinctrl", - "syscon", "simple-mfd"; diff --git a/target/linux/mvebu/patches-4.14/508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch b/target/linux/mvebu/patches-4.14/508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch deleted file mode 100644 index 840897473f..0000000000 --- a/target/linux/mvebu/patches-4.14/508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch +++ /dev/null @@ -1,56 +0,0 @@ -From bffed3d4abcd32ba6d492a9bd7ebe81dc92eaa9a Mon Sep 17 00:00:00 2001 -From: Ellie Reeves <ellierevves@gmail.com> -Date: Sun, 25 Mar 2018 21:57:36 +0200 -Subject: [PATCH] arm64: dts: armada-3720-espressobin: wire up spi flash -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This is the storage the machine boots from by default. The partitioning -is taken from the U-Boot that is shipped with the board. There is some -more space on the flash that isn't used. - -Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> -Signed-off-by: Ellie Reeves <ellierevves@gmail.com> -Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> ---- - .../dts/marvell/armada-3720-espressobin.dts | 27 +++++++++++++++++++ - 1 file changed, 27 insertions(+) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -96,6 +96,33 @@ - status = "okay"; - }; - -+&spi0 { -+ status = "okay"; -+ -+ flash@0 { -+ reg = <0>; -+ compatible = "winbond,w25q32dw", "jedec,spi-flash"; -+ spi-max-frequency = <104000000>; -+ m25p,fast-read; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0 0x180000>; -+ }; -+ -+ partition@180000 { -+ label = "ubootenv"; -+ reg = <0x180000 0x10000>; -+ }; -+ }; -+ }; -+}; -+ - /* Exported on the micro USB connector J5 through an FTDI */ - &uart0 { - status = "okay"; diff --git a/target/linux/mvebu/patches-4.14/509-cpufreq-armada-37xx-Fix-clock-leak.patch b/target/linux/mvebu/patches-4.14/509-cpufreq-armada-37xx-Fix-clock-leak.patch deleted file mode 100644 index 7479c6db21..0000000000 --- a/target/linux/mvebu/patches-4.14/509-cpufreq-armada-37xx-Fix-clock-leak.patch +++ /dev/null @@ -1,35 +0,0 @@ -From bbcc328561040292f7d6796954d478e4a2335e6f Mon Sep 17 00:00:00 2001 -From: Gregory CLEMENT <gregory.clement@bootlin.com> -Date: Wed, 4 Apr 2018 16:44:44 +0200 -Subject: [PATCH] cpufreq: armada-37xx: Fix clock leak - -There was no clk_put() balancing the clk_get(). This commit fixes it. - -Fixes: 92ce45fb875d (cpufreq: Add DVFS support for Armada 37xx) -Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ -Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> -Acked-by: Viresh Kumar <viresh.kumar@linaro.org> -Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> ---- - drivers/cpufreq/armada-37xx-cpufreq.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/cpufreq/armada-37xx-cpufreq.c -+++ b/drivers/cpufreq/armada-37xx-cpufreq.c -@@ -202,6 +202,7 @@ static int __init armada37xx_cpufreq_dri - cur_frequency = clk_get_rate(clk); - if (!cur_frequency) { - dev_err(cpu_dev, "Failed to get clock rate for CPU\n"); -+ clk_put(clk); - return -EINVAL; - } - -@@ -210,6 +211,7 @@ static int __init armada37xx_cpufreq_dri - return -EINVAL; - - armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider); -+ clk_put(clk); - - for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR; - load_lvl++) { diff --git a/target/linux/mvebu/patches-4.14/510-clk-mvebu-armada-37xx-periph-Fix-switching-CPU-rate-.patch b/target/linux/mvebu/patches-4.14/510-clk-mvebu-armada-37xx-periph-Fix-switching-CPU-rate-.patch deleted file mode 100644 index 42bfef7b7e..0000000000 --- a/target/linux/mvebu/patches-4.14/510-clk-mvebu-armada-37xx-periph-Fix-switching-CPU-rate-.patch +++ /dev/null @@ -1,92 +0,0 @@ -From 61c40f35f5cd6f67ccbd7319a1722eb78c815989 Mon Sep 17 00:00:00 2001 -From: Gregory CLEMENT <gregory.clement@bootlin.com> -Date: Tue, 19 Jun 2018 14:34:45 +0200 -Subject: [PATCH] clk: mvebu: armada-37xx-periph: Fix switching CPU rate from - 300Mhz to 1.2GHz - -Switching the CPU from the L2 or L3 frequencies (300 and 200 Mhz -respectively) to L0 frequency (1.2 Ghz) requires a significant amount -of time to let VDD stabilize to the appropriate voltage. This amount of -time is large enough that it cannot be covered by the hardware -countdown register. Due to this, the CPU might start operating at L0 -before the voltage is stabilized, leading to CPU stalls. - -To work around this problem, we prevent switching directly from the -L2/L3 frequencies to the L0 frequency, and instead switch to the L1 -frequency in-between. The sequence therefore becomes: - -1. First switch from L2/L3(200/300MHz) to L1(600MHZ) -2. Sleep 20ms for stabling VDD voltage -3. Then switch from L1(600MHZ) to L0(1200Mhz). - -It is based on the work done by Ken Ma <make@marvell.com> - -Cc: stable@vger.kernel.org -Fixes: 2089dc33ea0e ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks") -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> -Signed-off-by: Stephen Boyd <sboyd@kernel.org> ---- - drivers/clk/mvebu/armada-37xx-periph.c | 38 ++++++++++++++++++++++++++ - 1 file changed, 38 insertions(+) - ---- a/drivers/clk/mvebu/armada-37xx-periph.c -+++ b/drivers/clk/mvebu/armada-37xx-periph.c -@@ -35,6 +35,7 @@ - #define CLK_SEL 0x10 - #define CLK_DIS 0x14 - -+#define ARMADA_37XX_DVFS_LOAD_1 1 - #define LOAD_LEVEL_NR 4 - - #define ARMADA_37XX_NB_L0L1 0x18 -@@ -507,6 +508,40 @@ static long clk_pm_cpu_round_rate(struct - return -EINVAL; - } - -+/* -+ * Switching the CPU from the L2 or L3 frequencies (300 and 200 Mhz -+ * respectively) to L0 frequency (1.2 Ghz) requires a significant -+ * amount of time to let VDD stabilize to the appropriate -+ * voltage. This amount of time is large enough that it cannot be -+ * covered by the hardware countdown register. Due to this, the CPU -+ * might start operating at L0 before the voltage is stabilized, -+ * leading to CPU stalls. -+ * -+ * To work around this problem, we prevent switching directly from the -+ * L2/L3 frequencies to the L0 frequency, and instead switch to the L1 -+ * frequency in-between. The sequence therefore becomes: -+ * 1. First switch from L2/L3(200/300MHz) to L1(600MHZ) -+ * 2. Sleep 20ms for stabling VDD voltage -+ * 3. Then switch from L1(600MHZ) to L0(1200Mhz). -+ */ -+static void clk_pm_cpu_set_rate_wa(unsigned long rate, struct regmap *base) -+{ -+ unsigned int cur_level; -+ -+ if (rate != 1200 * 1000 * 1000) -+ return; -+ -+ regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level); -+ cur_level &= ARMADA_37XX_NB_CPU_LOAD_MASK; -+ if (cur_level <= ARMADA_37XX_DVFS_LOAD_1) -+ return; -+ -+ regmap_update_bits(base, ARMADA_37XX_NB_CPU_LOAD, -+ ARMADA_37XX_NB_CPU_LOAD_MASK, -+ ARMADA_37XX_DVFS_LOAD_1); -+ msleep(20); -+} -+ - static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) - { -@@ -537,6 +572,9 @@ static int clk_pm_cpu_set_rate(struct cl - */ - reg = ARMADA_37XX_NB_CPU_LOAD; - mask = ARMADA_37XX_NB_CPU_LOAD_MASK; -+ -+ clk_pm_cpu_set_rate_wa(rate, base); -+ - regmap_update_bits(base, reg, mask, load_level); - - return rate; diff --git a/target/linux/mvebu/patches-4.14/511-clk-mvebu-armada-37xx-periph-Fix-wrong-return-value-.patch b/target/linux/mvebu/patches-4.14/511-clk-mvebu-armada-37xx-periph-Fix-wrong-return-value-.patch deleted file mode 100644 index 389a13a2b4..0000000000 --- a/target/linux/mvebu/patches-4.14/511-clk-mvebu-armada-37xx-periph-Fix-wrong-return-value-.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 616bf80d381da13fbb392ebff06f46f946e3ee84 Mon Sep 17 00:00:00 2001 -From: Gregory CLEMENT <gregory.clement@bootlin.com> -Date: Fri, 13 Jul 2018 12:27:26 +0200 -Subject: [PATCH] clk: mvebu: armada-37xx-periph: Fix wrong return value in - get_parent - -The return value of the get_parent operation is a u8, whereas a -EINVAL -was returned. This wrong value was return if the value was bigger that -the number of parent but this case was already handled by the core. - -So we can just remove this chunk of code to fix the issue. - -Reported-by: Dan Carpenter <dan.carpenter@oracle.com> -Fixes: 9818a7a4fd10 ("clk: mvebu: armada-37xx-periph: prepare cpu clk to -be used with DVFS") -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> -Signed-off-by: Stephen Boyd <sboyd@kernel.org> ---- - drivers/clk/mvebu/armada-37xx-periph.c | 3 --- - 1 file changed, 3 deletions(-) - ---- a/drivers/clk/mvebu/armada-37xx-periph.c -+++ b/drivers/clk/mvebu/armada-37xx-periph.c -@@ -429,9 +429,6 @@ static u8 clk_pm_cpu_get_parent(struct c - val &= pm_cpu->mask_mux; - } - -- if (val >= num_parents) -- return -EINVAL; -- - return val; - } - diff --git a/target/linux/mvebu/patches-4.14/512-clk-mvebu-armada-37xx-periph-Remove-unused-var-num_p.patch b/target/linux/mvebu/patches-4.14/512-clk-mvebu-armada-37xx-periph-Remove-unused-var-num_p.patch deleted file mode 100644 index 874f982bd7..0000000000 --- a/target/linux/mvebu/patches-4.14/512-clk-mvebu-armada-37xx-periph-Remove-unused-var-num_p.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 8927c27b32703e28041ae19bf25ea53461be83a1 Mon Sep 17 00:00:00 2001 -From: Anders Roxell <anders.roxell@linaro.org> -Date: Fri, 27 Jul 2018 00:27:21 +0200 -Subject: [PATCH] clk: mvebu: armada-37xx-periph: Remove unused var num_parents -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -When building armada-37xx-periph, num_parents isn't used in function -clk_pm_cpu_get_parent: -drivers/clk/mvebu/armada-37xx-periph.c: In function ‘clk_pm_cpu_get_parent’: -drivers/clk/mvebu/armada-37xx-periph.c:419:6: warning: unused variable ‘num_parents’ [-Wunused-variable] - int num_parents = clk_hw_get_num_parents(hw); - ^~~~~~~~~~~ -Remove the declaration of num_parents to dispose the warning. - -Fixes: 616bf80d381d ("clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent") -Signed-off-by: Anders Roxell <anders.roxell@linaro.org> -Signed-off-by: Stephen Boyd <sboyd@kernel.org> ---- - drivers/clk/mvebu/armada-37xx-periph.c | 1 - - 1 file changed, 1 deletion(-) - ---- a/drivers/clk/mvebu/armada-37xx-periph.c -+++ b/drivers/clk/mvebu/armada-37xx-periph.c -@@ -419,7 +419,6 @@ static unsigned int armada_3700_pm_dvfs_ - static u8 clk_pm_cpu_get_parent(struct clk_hw *hw) - { - struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); -- int num_parents = clk_hw_get_num_parents(hw); - u32 val; - - if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) { diff --git a/target/linux/mvebu/patches-4.14/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch b/target/linux/mvebu/patches-4.14/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch deleted file mode 100644 index 19702a61ed..0000000000 --- a/target/linux/mvebu/patches-4.14/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch +++ /dev/null @@ -1,40 +0,0 @@ -From eefe328439642101774f0f5c4ea0dc6ba1cfb687 Mon Sep 17 00:00:00 2001 -From: Ding Tao <miyatsu@qq.com> -Date: Fri, 26 Oct 2018 11:50:27 +0000 -Subject: [PATCH] arm64: dts: marvell: armada37xx: Add emmc/sdio pinctrl - definition - -Add emmc/sdio pinctrl definition for marvell armada37xx SoCs. - -Signed-off-by: Ding Tao <miyatsu@qq.com> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> ---- - arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -@@ -218,6 +218,11 @@ - groups = "uart2"; - function = "uart"; - }; -+ -+ mmc_pins: mmc-pins { -+ groups = "emmc_nb"; -+ function = "emmc"; -+ }; - }; - - nb_pm: syscon@14000 { -@@ -247,6 +252,11 @@ - function = "mii"; - }; - -+ sdio_pins: sdio-pins { -+ groups = "sdio_sb"; -+ function = "sdio"; -+ }; -+ - }; - - eth0: ethernet@30000 { diff --git a/target/linux/mvebu/patches-4.14/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch b/target/linux/mvebu/patches-4.14/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch deleted file mode 100644 index 26d090f050..0000000000 --- a/target/linux/mvebu/patches-4.14/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 43ebc7c1b3ed8198b9acf3019eca16e722f7331c Mon Sep 17 00:00:00 2001 -From: Ding Tao <miyatsu@qq.com> -Date: Fri, 26 Oct 2018 11:50:28 +0000 -Subject: [PATCH] arm64: dts: marvell: armada-37xx: Enable emmc on espressobin - -The ESPRESSObin board has a emmc interface available on U11: declare it -and let the bootloader enable it if the emmc is present. - -[gregory.clement@bootlin.com: disable the emmc by default] -Signed-off-by: Ding Tao <miyatsu@qq.com> -Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> ---- - .../dts/marvell/armada-3720-espressobin.dts | 22 +++++++++++++++++++ - 1 file changed, 22 insertions(+) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -93,9 +93,31 @@ - cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; - marvell,pad-type = "sd"; - vqmmc-supply = <&vcc_sd_reg1>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; - status = "okay"; - }; - -+/* U11 */ -+&sdhci0 { -+ non-removable; -+ bus-width = <8>; -+ mmc-ddr-1_8v; -+ mmc-hs400-1_8v; -+ marvell,xenon-emmc; -+ marvell,xenon-tun-count = <9>; -+ marvell,pad-type = "fixed-1-8v"; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc_pins>; -+/* -+ * This eMMC is not populated on all boards, so disable it by -+ * default and let the bootloader enable it, if it is present -+ */ -+ status = "disabled"; -+}; -+ - &spi0 { - status = "okay"; - diff --git a/target/linux/mvebu/patches-4.14/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch b/target/linux/mvebu/patches-4.14/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch deleted file mode 100644 index 206caf2fce..0000000000 --- a/target/linux/mvebu/patches-4.14/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch +++ /dev/null @@ -1,20 +0,0 @@ -From be893f672e340b56ca60f2f6c32fdd713a5852f5 Mon Sep 17 00:00:00 2001 -From: Kevin Mihelich <kevin@archlinuxarm.org> -Date: Tue, 4 Jul 2017 19:25:28 -0600 -Subject: arm64: dts: marvell: armada37xx: Add eth0 alias - -Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org> ---- - arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -@@ -54,6 +54,7 @@ - #size-cells = <2>; - - aliases { -+ ethernet0 = ð0; - serial0 = &uart0; - }; - diff --git a/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch b/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch deleted file mode 100644 index fc7cb2af1e..0000000000 --- a/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 3217cdfe8a3eae76fafbebbe407be5985a7fd4c2 Mon Sep 17 00:00:00 2001 -From: Tomasz Maciej Nowak <tmn505@gmail.com> -Date: Mon, 31 Dec 2018 14:18:50 +0100 -Subject: [PATCH] arm64: dts: armada-3720-espressobin: correct spi node - -The manufacturer of this board, ships it with various SPI NOR chips and -increments U-Boot bootloader version along the time. There is no way to -tell which is placed on the board since no revision bump takes place. -This creates two issues. - -The first, cosmetic. Since the SPI chip may differ, there's message on -boot stating that kernel expected w25q32dw and found different one. To -correct this, remove optional device-specific compatible string. Being -here lets replace bogus "spi-flash" string with proper one. - -The second is linked to partitions layout, it changed after commit [1] -in Marvells downstream U-Boot fork, shifting environment location to the -end of boot device. Since the new boards can have U-Boot with this -change it can lead to improper results writing or reading from these -partitions. We can't tell if users will update bootloader to recent -version, so let's drop current layout. - -1. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/81e7251252aefe1a6b829ed05f3586320cb45372 - -Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> ---- - .../dts/marvell/armada-3720-espressobin.dts | 18 +----------------- - 1 file changed, 1 insertion(+), 17 deletions(-) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -123,25 +123,9 @@ - - flash@0 { - reg = <0>; -- compatible = "winbond,w25q32dw", "jedec,spi-flash"; -+ compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - m25p,fast-read; -- -- partitions { -- compatible = "fixed-partitions"; -- #address-cells = <1>; -- #size-cells = <1>; -- -- partition@0 { -- label = "uboot"; -- reg = <0 0x180000>; -- }; -- -- partition@180000 { -- label = "ubootenv"; -- reg = <0x180000 0x10000>; -- }; -- }; - }; - }; - diff --git a/target/linux/mvebu/patches-4.14/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch b/target/linux/mvebu/patches-4.14/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch deleted file mode 100644 index d0103bba19..0000000000 --- a/target/linux/mvebu/patches-4.14/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 6ea9a1ee9367fb35acff1c08a0dc4213ff4687a0 Mon Sep 17 00:00:00 2001 -From: Tomasz Maciej Nowak <tmn505@gmail.com> -Date: Tue, 9 Apr 2019 15:53:42 +0200 -Subject: [PATCH] arm64: dts: marvell: armada-3720-espressobin: add ports - phandle - -Instead of referencing the whole mdio node, add ports phandle to adjust -port labels in dts for different hardware iterations of ESPRESSObin -boards. - -Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> ---- - arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -153,7 +153,7 @@ - - dsa,member = <0 0>; - -- ports { -+ ports: ports { - #address-cells = <1>; - #size-cells = <0>; - diff --git a/target/linux/mvebu/patches-4.14/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch b/target/linux/mvebu/patches-4.14/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch deleted file mode 100644 index 74e78d3b54..0000000000 --- a/target/linux/mvebu/patches-4.14/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch +++ /dev/null @@ -1,138 +0,0 @@ -From patchwork Thu Sep 28 12:58:34 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v2, - 3/7] PCI: aardvark: set host and device to the same MAX payload size -X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> -X-Patchwork-Id: 819587 -Message-Id: <20170928125838.11887-4-thomas.petazzoni@free-electrons.com> -To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org -Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement - <gregory.clement@free-electrons.com>, - Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>, - Yehuda Yitschak <yehuday@marvell.com>, - linux-arm-kernel@lists.infradead.org, Antoine Tenart - <antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?= - <miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>, - Thomas Petazzoni <thomas.petazzoni@free-electrons.com> -Date: Thu, 28 Sep 2017 14:58:34 +0200 -From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> -List-Id: <linux-pci.vger.kernel.org> - -From: Victor Gu <xigu@marvell.com> - -Since the Aardvark does not implement a PCIe root bus, the Linux PCIe -subsystem will not align the MAX payload size between the host and the -device. This patch ensures that the host and device have the same MAX -payload size, fixing a number of problems with various PCIe devices. - -This is part of fixing bug -https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was -reported as the user to be important to get a Intel 7260 mini-PCIe -WiFi card working. - -Fixes: Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver") -Signed-off-by: Victor Gu <xigu@marvell.com> -Reviewed-by: Evan Wang <xswang@marvell.com> -Reviewed-by: Nadav Haklai <nadavh@marvell.com> -[Thomas: tweak commit log.] -Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> ---- - drivers/pci/host/pci-aardvark.c | 60 ++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 59 insertions(+), 1 deletion(-) - ---- a/drivers/pci/host/pci-aardvark.c -+++ b/drivers/pci/host/pci-aardvark.c -@@ -30,9 +30,11 @@ - #define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8 - #define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4) - #define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT 5 -+#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ 0x2 - #define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11) - #define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT 12 - #define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ 0x2 -+#define PCIE_CORE_MPS_UNIT_BYTE 128 - #define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0 - #define PCIE_CORE_LINK_L0S_ENTRY BIT(0) - #define PCIE_CORE_LINK_TRAINING BIT(5) -@@ -297,7 +299,8 @@ static void advk_pcie_setup_hw(struct ad - - /* Set PCIe Device Control and Status 1 PF0 register */ - reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE | -- (7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) | -+ (PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ << -+ PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) | - PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE | - (PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ << - PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT); -@@ -886,6 +889,58 @@ out_release_res: - return err; - } - -+static int advk_pcie_find_smpss(struct pci_dev *dev, void *data) -+{ -+ u8 *smpss = data; -+ -+ if (!dev) -+ return 0; -+ -+ if (!pci_is_pcie(dev)) -+ return 0; -+ -+ if (*smpss > dev->pcie_mpss) -+ *smpss = dev->pcie_mpss; -+ -+ return 0; -+} -+ -+static int advk_pcie_bus_configure_mps(struct pci_dev *dev, void *data) -+{ -+ int mps; -+ -+ if (!dev) -+ return 0; -+ -+ if (!pci_is_pcie(dev)) -+ return 0; -+ -+ mps = PCIE_CORE_MPS_UNIT_BYTE << *(u8 *)data; -+ pcie_set_mps(dev, mps); -+ -+ return 0; -+} -+ -+static void advk_pcie_configure_mps(struct pci_bus *bus, struct advk_pcie *pcie) -+{ -+ u8 smpss = PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ; -+ u32 reg; -+ -+ /* Find the minimal supported MAX payload size */ -+ advk_pcie_find_smpss(bus->self, &smpss); -+ pci_walk_bus(bus, advk_pcie_find_smpss, &smpss); -+ -+ /* Configure RC MAX payload size */ -+ reg = advk_readl(pcie, PCIE_CORE_DEV_CTRL_STATS_REG); -+ reg &= ~PCI_EXP_DEVCTL_PAYLOAD; -+ reg |= smpss << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT; -+ advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG); -+ -+ /* Configure device MAX payload size */ -+ advk_pcie_bus_configure_mps(bus->self, &smpss); -+ pci_walk_bus(bus, advk_pcie_bus_configure_mps, &smpss); -+} -+ - static int advk_pcie_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -@@ -960,6 +1015,9 @@ static int advk_pcie_probe(struct platfo - list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child); - -+ /* Configure the MAX pay load size */ -+ advk_pcie_configure_mps(bus, pcie); -+ - pci_bus_add_devices(bus); - return 0; - } diff --git a/target/linux/mvebu/patches-4.14/526-PCI-aardvark-disable-LOS-state-by-default.patch b/target/linux/mvebu/patches-4.14/526-PCI-aardvark-disable-LOS-state-by-default.patch deleted file mode 100644 index 0ee4af4e8d..0000000000 --- a/target/linux/mvebu/patches-4.14/526-PCI-aardvark-disable-LOS-state-by-default.patch +++ /dev/null @@ -1,55 +0,0 @@ -From patchwork Thu Sep 28 12:58:36 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v2,5/7] PCI: aardvark: disable LOS state by default -X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> -X-Patchwork-Id: 819590 -Message-Id: <20170928125838.11887-6-thomas.petazzoni@free-electrons.com> -To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org -Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement - <gregory.clement@free-electrons.com>, - Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>, - Yehuda Yitschak <yehuday@marvell.com>, - linux-arm-kernel@lists.infradead.org, Antoine Tenart - <antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?= - <miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>, - Thomas Petazzoni <thomas.petazzoni@free-electrons.com> -Date: Thu, 28 Sep 2017 14:58:36 +0200 -From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> -List-Id: <linux-pci.vger.kernel.org> - -From: Victor Gu <xigu@marvell.com> - -Some PCIe devices do not support LOS, and will cause timeouts if the -root complex forces the LOS state. This patch disables the LOS state -by default. - -This is part of fixing bug -https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was -reported as the user to be important to get a Intel 7260 mini-PCIe -WiFi card working. - -Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver") -Signed-off-by: Victor Gu <xigu@marvell.com> -Reviewed-by: Evan Wang <xswang@marvell.com> -Reviewed-by: Nadav Haklai <nadavh@marvell.com> -[Thomas: tweak commit log.] -Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> ---- - drivers/pci/host/pci-aardvark.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/drivers/pci/host/pci-aardvark.c -+++ b/drivers/pci/host/pci-aardvark.c -@@ -368,8 +368,7 @@ static void advk_pcie_setup_hw(struct ad - - advk_pcie_wait_for_link(pcie); - -- reg = PCIE_CORE_LINK_L0S_ENTRY | -- (1 << PCIE_CORE_LINK_WIDTH_SHIFT); -+ reg = (1 << PCIE_CORE_LINK_WIDTH_SHIFT); - advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG); - - reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG); diff --git a/target/linux/mvebu/patches-4.14/527-PCI-aardvark-allow-to-specify-link-capability.patch b/target/linux/mvebu/patches-4.14/527-PCI-aardvark-allow-to-specify-link-capability.patch deleted file mode 100644 index fb57f4112a..0000000000 --- a/target/linux/mvebu/patches-4.14/527-PCI-aardvark-allow-to-specify-link-capability.patch +++ /dev/null @@ -1,43 +0,0 @@ -From f70b629e488cc3f2a325ac35476f4f7ae502c5d0 Mon Sep 17 00:00:00 2001 -From: Tomasz Maciej Nowak <tmn505@gmail.com> -Date: Thu, 14 Jun 2018 14:24:40 +0200 -Subject: [PATCH 1/2] PCI: aardvark: allow to specify link capability - -Use DT of_pci_get_max_link_speed() facility to allow specifying link -capability. If none or unspecified value is given it falls back to gen2, -which is default for Armada 3700 SoC. - -Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> ---- - drivers/pci/host/pci-aardvark.c | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - ---- a/drivers/pci/host/pci-aardvark.c -+++ b/drivers/pci/host/pci-aardvark.c -@@ -272,6 +272,8 @@ static void advk_pcie_set_ob_win(struct - - static void advk_pcie_setup_hw(struct advk_pcie *pcie) - { -+ struct device *dev = &pcie->pdev->dev; -+ struct device_node *node = dev->of_node; - u32 reg; - int i; - -@@ -311,10 +313,15 @@ static void advk_pcie_setup_hw(struct ad - PCIE_CORE_CTRL2_TD_ENABLE; - advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG); - -- /* Set GEN2 */ -+ /* Set GEN */ - reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); - reg &= ~PCIE_GEN_SEL_MSK; -- reg |= SPEED_GEN_2; -+ if (of_pci_get_max_link_speed(node) == 1) -+ reg |= SPEED_GEN_1; -+ else if (of_pci_get_max_link_speed(node) == 3) -+ reg |= SPEED_GEN_3; -+ else -+ reg |= SPEED_GEN_2; - advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); - - /* Set lane X1 */ diff --git a/target/linux/mvebu/patches-4.14/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch b/target/linux/mvebu/patches-4.14/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch deleted file mode 100644 index 5ff9b47268..0000000000 --- a/target/linux/mvebu/patches-4.14/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 33f8fdcedb01680427328d710594facef7a0092c Mon Sep 17 00:00:00 2001 -From: Tomasz Maciej Nowak <tmn505@gmail.com> -Date: Thu, 14 Jun 2018 14:40:26 +0200 -Subject: [PATCH 2/2] arm64: dts: armada-3720-espressobin: set max link to gen1 - -Since the beginning there's been an issue with initializing the Atheros -based MiniPCIe wireless cards. Here's an example of kerenel log: - - OF: PCI: host bridge /soc/pcie@d0070000 ranges: - OF: PCI: MEM 0xe8000000..0xe8ffffff -> 0xe8000000 - OF: PCI: IO 0xe9000000..0xe900ffff -> 0xe9000000 - advk-pcie d0070000.pcie: link up - advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00 - pci_bus 0000:00: root bus resource [bus 00-ff] - pci_bus 0000:00: root bus resource [mem0xe8000000-0xe8ffffff] - pci_bus 0000:00: root bus resource [io 0x0000-0xffff](bus address [0xe9000000-0xe900ffff]) - pci 0000:00:00.0: BAR 0: assigned [mem0xe8000000-0xe801ffff 64bit] - pci 0000:00:00.0: BAR 6: assigned [mem0xe8020000-0xe802ffff pref] - [...] - advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x3c - advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x44 - advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x4 - ath9k 0000:00:00.0: enabling device (0000 -> 0002) - advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x3c - advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0xc - advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x4 - advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x40 - ath9k 0000:00:00.0: request_irq failed - advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x4 - ath9k: probe of 0000:00:00.0 failed with error -22 - -The same happens for ath5k cards, while ath10k card didn't appear at -all (not detected): - - OF: PCI: host bridge /soc/pcie@d0070000 ranges: - OF: PCI: MEM 0xe8000000..0xe8ffffff -> 0xe8000000 - OF: PCI: IO 0xe9000000..0xe900ffff -> 0xe9000000 - advk-pcie d0070000.pcie: link never came up - advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00 - pci_bus 0000:00: root bus resource [bus 00-ff] - pci_bus 0000:00: root bus resource [mem0xe8000000-0xe8ffffff] - pci_bus 0000:00: root bus resource [io 0x0000-0xffff](bus address [0xe9000000-0xe900ffff]) - advk-pcie d0070000.pcie: config read/write timed out - -Following the issue on esppressobin.net forum [1] the workaround seems -to be limiting the speed of PCIe bridge to 1st generation. This fixed -the initialisation of all tested Atheros wireless cards. -The patch in the forum thread swaped registers which would limit speed -for all Armada 3700 based boards. The approach in this patch, in -conjunction with "PCI: aardvark: allow to specify link capability" patch -is less invasive, it only touches the affected board. - -For the record, the iwlwifi and mt76 cards were not affected by this -issue. - -1. http://espressobin.net/forums/topic/which-pcie-wlan-cards-are-supported - -Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> ---- - arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -79,6 +79,8 @@ - /* J9 */ - &pcie0 { - status = "okay"; -+ -+ max-link-speed = <1>; - }; - - /* J6 */ |