diff options
Diffstat (limited to 'target/linux/mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch')
-rw-r--r-- | target/linux/mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch b/target/linux/mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch new file mode 100644 index 0000000000..2d56749607 --- /dev/null +++ b/target/linux/mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch @@ -0,0 +1,224 @@ +From fa89f53bd7288d6aa7a982841119e7123faf5a53 Mon Sep 17 00:00:00 2001 +From: Evan Wang <xswang@marvell.com> +Date: Fri, 13 Apr 2018 12:32:30 +0800 +Subject: [PATCH] libahci: Allow drivers to override stop_engine + +Marvell armada37xx, armada7k and armada8k share the same +AHCI sata controller IP, and currently there is an issue +(Errata Ref#226)that the SATA can not be detected via SATA +Port-MultiPlayer(PMP). After debugging, the reason is +found that the value of Port-x FIS-based Switching Control +(PxFBS@0x40) became wrong. +According to design, the bits[11:8, 0] of register PxFBS +are cleared when Port Command and Status (0x18) bit[0] +changes its value from 1 to 0, i.e. falling edge of Port +Command and Status bit[0] sends PULSE that resets PxFBS +bits[11:8; 0]. +So it needs save the port PxFBS register before PxCMD +ST write and restore the port PxFBS register afterwards +in ahci_stop_engine(). + +This commit allows drivers to override ahci_stop_engine +behavior for use by the Marvell AHCI driver(and potentially +other drivers in the future). + +Signed-off-by: Evan Wang <xswang@marvell.com> +Cc: Ofer Heifetz <oferh@marvell.com> +Cc: Tejun Heo <tj@kernel.org> +Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> +Signed-off-by: Tejun Heo <tj@kernel.org> +--- + drivers/ata/ahci.c | 6 +++--- + drivers/ata/ahci.h | 7 +++++++ + drivers/ata/ahci_qoriq.c | 2 +- + drivers/ata/ahci_xgene.c | 4 ++-- + drivers/ata/libahci.c | 20 ++++++++++++-------- + drivers/ata/sata_highbank.c | 2 +- + 6 files changed, 26 insertions(+), 15 deletions(-) + +diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c +index 1ff17799769d0..6389c88b3500a 100644 +--- a/drivers/ata/ahci.c ++++ b/drivers/ata/ahci.c +@@ -698,7 +698,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, + + DPRINTK("ENTER\n"); + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), + deadline, &online, NULL); +@@ -724,7 +724,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, + bool online; + int rc; + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); +@@ -788,7 +788,7 @@ static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, + + DPRINTK("ENTER\n"); + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + for (i = 0; i < 2; i++) { + u16 val; +diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h +index a9d996e17d75e..824bd399f02ea 100644 +--- a/drivers/ata/ahci.h ++++ b/drivers/ata/ahci.h +@@ -365,6 +365,13 @@ struct ahci_host_priv { + * be overridden anytime before the host is activated. + */ + void (*start_engine)(struct ata_port *ap); ++ /* ++ * Optional ahci_stop_engine override, if not set this gets set to the ++ * default ahci_stop_engine during ahci_save_initial_config, this can ++ * be overridden anytime before the host is activated. ++ */ ++ int (*stop_engine)(struct ata_port *ap); ++ + irqreturn_t (*irq_handler)(int irq, void *dev_instance); + + /* only required for per-port MSI(-X) support */ +diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c +index 2685f28160f70..cfdef4d44ae92 100644 +--- a/drivers/ata/ahci_qoriq.c ++++ b/drivers/ata/ahci_qoriq.c +@@ -96,7 +96,7 @@ static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class, + + DPRINTK("ENTER\n"); + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + /* + * There is a errata on ls1021a Rev1.0 and Rev2.0 which is: +diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c +index c2b5941d9184d..ad58da7c9affd 100644 +--- a/drivers/ata/ahci_xgene.c ++++ b/drivers/ata/ahci_xgene.c +@@ -165,7 +165,7 @@ static int xgene_ahci_restart_engine(struct ata_port *ap) + PORT_CMD_ISSUE, 0x0, 1, 100)) + return -EBUSY; + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + ahci_start_fis_rx(ap); + + /* +@@ -421,7 +421,7 @@ static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class, + portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR); + portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI); + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + rc = xgene_ahci_do_hardreset(link, deadline, &online); + +diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c +index 7adcf3caabd00..e5d90977caec2 100644 +--- a/drivers/ata/libahci.c ++++ b/drivers/ata/libahci.c +@@ -560,6 +560,9 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) + if (!hpriv->start_engine) + hpriv->start_engine = ahci_start_engine; + ++ if (!hpriv->stop_engine) ++ hpriv->stop_engine = ahci_stop_engine; ++ + if (!hpriv->irq_handler) + hpriv->irq_handler = ahci_single_level_irq_intr; + } +@@ -897,9 +900,10 @@ static void ahci_start_port(struct ata_port *ap) + static int ahci_deinit_port(struct ata_port *ap, const char **emsg) + { + int rc; ++ struct ahci_host_priv *hpriv = ap->host->private_data; + + /* disable DMA */ +- rc = ahci_stop_engine(ap); ++ rc = hpriv->stop_engine(ap); + if (rc) { + *emsg = "failed to stop engine"; + return rc; +@@ -1310,7 +1314,7 @@ int ahci_kick_engine(struct ata_port *ap) + int busy, rc; + + /* stop engine */ +- rc = ahci_stop_engine(ap); ++ rc = hpriv->stop_engine(ap); + if (rc) + goto out_restart; + +@@ -1549,7 +1553,7 @@ int ahci_do_hardreset(struct ata_link *link, unsigned int *class, + + DPRINTK("ENTER\n"); + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); +@@ -2075,14 +2079,14 @@ void ahci_error_handler(struct ata_port *ap) + + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { + /* restart engine */ +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + hpriv->start_engine(ap); + } + + sata_pmp_error_handler(ap); + + if (!ata_dev_enabled(ap->link.device)) +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + } + EXPORT_SYMBOL_GPL(ahci_error_handler); + +@@ -2129,7 +2133,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) + return; + + /* set DITO, MDAT, DETO and enable DevSlp, need to stop engine first */ +- rc = ahci_stop_engine(ap); ++ rc = hpriv->stop_engine(ap); + if (rc) + return; + +@@ -2189,7 +2193,7 @@ static void ahci_enable_fbs(struct ata_port *ap) + return; + } + +- rc = ahci_stop_engine(ap); ++ rc = hpriv->stop_engine(ap); + if (rc) + return; + +@@ -2222,7 +2226,7 @@ static void ahci_disable_fbs(struct ata_port *ap) + return; + } + +- rc = ahci_stop_engine(ap); ++ rc = hpriv->stop_engine(ap); + if (rc) + return; + +diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c +index aafb8cc035232..e67815b896fcc 100644 +--- a/drivers/ata/sata_highbank.c ++++ b/drivers/ata/sata_highbank.c +@@ -410,7 +410,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, + int rc; + int retry = 100; + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + |