1 files changed, 77 insertions, 0 deletions
diff --git a/target/linux/mediatek/patches-5.15/130-dts-mt7629-add-snand-support.patch b/target/linux/mediatek/patches-5.15/130-dts-mt7629-add-snand-support.patch
new file mode 100644
index 0000000000..e7c5d9b167
--- /dev/null
+++ b/target/linux/mediatek/patches-5.15/130-dts-mt7629-add-snand-support.patch
@@ -0,0 +1,77 @@
+From c813fbe806257c574240770ef716fbee19f7dbfa Mon Sep 17 00:00:00 2001
+From: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
+Date: Thu, 6 Jun 2019 16:29:04 +0800
+Subject: [PATCH] spi: spi-mem: Mediatek: Add SPI Nand support for MT7629
+
+Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
+---
+ arch/arm/boot/dts/mt7629-rfb.dts | 45 ++++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/mt7629.dtsi    | 22 ++++++++++++++++
+ 3 files changed, 79 insertions(+)
+
+--- a/arch/arm/boot/dts/mt7629.dtsi
++++ b/arch/arm/boot/dts/mt7629.dtsi
+@@ -272,6 +272,22 @@
+ 			status = "disabled";
+ 		};
+ 
++		snand: snfi@1100d000 {
++			pinctrl-names = "default";
++ 			pinctrl-0 = <&serial_nand_pins>;
++			compatible = "mediatek,mt7629-snand";
++			reg = <0x1100d000 0x1000>, <0x1100e000 0x1000>;
++			reg-names = "nfi", "ecc";
++			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
++			clocks = <&pericfg CLK_PERI_NFI_PD>,
++				 <&pericfg CLK_PERI_SNFI_PD>,
++				 <&pericfg CLK_PERI_NFIECC_PD>;
++			clock-names = "nfi_clk", "pad_clk", "ecc_clk";
++			#address-cells = <1>;
++			#size-cells = <0>;
++			status = "disabled";
++		};
++
+ 		spi: spi@1100a000 {
+ 			compatible = "mediatek,mt7629-spi",
+ 				     "mediatek,mt7622-spi";
+--- a/arch/arm/boot/dts/mt7629-rfb.dts
++++ b/arch/arm/boot/dts/mt7629-rfb.dts
+@@ -254,6 +254,38 @@
+ 	};
+ };
+ 
++&snand {
++	status = "okay";
++	mediatek,quad-spi;
++
++	partitions {
++		compatible = "fixed-partitions";
++		#address-cells = <1>;
++		#size-cells = <1>;
++
++		partition@0 {
++			label = "Bootloader";
++			reg = <0x00000 0x0100000>;
++			read-only;
++		};
++
++		partition@100000 {
++			label = "Config";
++			reg = <0x100000 0x0040000>;
++		};
++
++		partition@140000 {
++			label = "factory";
++			reg = <0x140000 0x0080000>;
++		};
++
++		partition@1c0000 {
++			label = "firmware";
++			reg = <0x1c0000 0x1000000>;
++		};
++	};
++};
++
+ &spi {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&spi_pins>;