diff options
Diffstat (limited to 'target/linux/mediatek/image')
| -rw-r--r-- | target/linux/mediatek/image/mt7622.mk | 40 |
1 files changed, 30 insertions, 10 deletions
diff --git a/target/linux/mediatek/image/mt7622.mk b/target/linux/mediatek/image/mt7622.mk index d0f5280dcf7..e393b8433ea 100644 --- a/target/linux/mediatek/image/mt7622.mk +++ b/target/linux/mediatek/image/mt7622.mk @@ -37,9 +37,15 @@ define Build/bl31-uboot cat $(STAGING_DIR_IMAGE)/mt7622_$1-u-boot.fip >> $@ endef -# Append header to a D-Link M32 Kernel 1 partition -define Build/m32-recovery-header-kernel1 - echo -en "DLK6E6010001\x00\x00\xCF\x33" > "$@.header" +# Append header to a D-Link M32/R32 Kernel 1 partition +define Build/m32-r32-recovery-header-kernel1 + $(eval header_start=$(word 1,$(1))) +# create $@.header without the checksum + echo -en "$(header_start)\x00\x00" > "$@.header" +# Calculate checksum over data area ($@) and append it to the header. +# The checksum is the 2byte-sum over the whole data area. +# Every overflow during the checksum calculation must increment the current checksum value by 1. + od -v -w2 -tu2 -An --endian little "$@" | awk '{ s+=$$1; } END { s%=65535; printf "%c%c",s%256,s/256; }' >> "$@.header" echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00\x8D\x57\x30\x0B" >> "$@.header" # Byte 0-3: Erase Start 0x002C0000 # Byte 4-7: Erase Length 0x02D00000 @@ -48,9 +54,11 @@ define Build/m32-recovery-header-kernel1 echo -en "\x00\x00\x2C\x00\x00\x00\xD0\x02\x00\x00\x2C\x00\x00\x00\xD0\x02" >> "$@.header" # Only zeros echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" >> "$@.header" -# Note: The last 2 bytes of the following line are the checksum of the header -# If any data in the header will be changed, the checksum must be re-calculated - echo -en "\x42\x48\x02\x00\x00\x00\x08\x00\x00\x00\x00\x00\x60\x6E\x68\x61" >> "$@.header" +# Last 16 bytes, but without checksum + echo -en "\x42\x48\x02\x00\x00\x00\x08\x00\x00\x00\x00\x00\x60\x6E" >> "$@.header" +# Calculate and append checksum: The checksum must be set so that the 2byte-sum of the whole header is 0. +# Every overflow during the checksum calculation must increment the current checksum value by 1. + od -v -w2 -tu2 -An --endian little "$@.header" | awk '{s+=65535-$$1;}END{s%=65535;printf "%c%c",s%256,s/256;}' >> "$@.header" cat "$@.header" "$@" > "$@.new" mv "$@.new" "$@" rm "$@.header" @@ -168,12 +176,10 @@ define Device/buffalo_wsr-3200ax4s endef TARGET_DEVICES += buffalo_wsr-3200ax4s -define Device/dlink_eagle-pro-ai-m32-a1 +define Device/dlink_eagle-pro-ai-ax3200-a1 IMAGE_SIZE := 46080k DEVICE_VENDOR := D-Link - DEVICE_MODEL := EAGLE PRO AI M32 DEVICE_VARIANT := A1 - DEVICE_DTS := mt7622-dlink-eagle-pro-ai-m32-a1 DEVICE_DTS_DIR := ../dts DEVICE_PACKAGES := kmod-mt7915-firmware KERNEL_SIZE := 8192k @@ -183,10 +189,24 @@ define Device/dlink_eagle-pro-ai-m32-a1 IMAGES += tftp.bin recovery.bin IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata IMAGE/tftp.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size - IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | pad-to $$(IMAGE_SIZE) | m32-recovery-header-kernel1 +endef + +define Device/dlink_eagle-pro-ai-m32-a1 + $(Device/dlink_eagle-pro-ai-ax3200-a1) + DEVICE_MODEL := EAGLE PRO AI M32 + DEVICE_DTS := mt7622-dlink-eagle-pro-ai-m32-a1 + IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | pad-to $$(IMAGE_SIZE) | m32-r32-recovery-header-kernel1 DLK6E6010001 endef TARGET_DEVICES += dlink_eagle-pro-ai-m32-a1 +define Device/dlink_eagle-pro-ai-r32-a1 + $(Device/dlink_eagle-pro-ai-ax3200-a1) + DEVICE_MODEL := EAGLE PRO AI R32 + DEVICE_DTS := mt7622-dlink-eagle-pro-ai-r32-a1 + IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | pad-to $$(IMAGE_SIZE) | m32-r32-recovery-header-kernel1 DLK6E6015001 +endef +TARGET_DEVICES += dlink_eagle-pro-ai-r32-a1 + define Device/elecom_wrc-2533gent DEVICE_VENDOR := Elecom DEVICE_MODEL := WRC-2533GENT |