diff options
Diffstat (limited to 'target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_interrupt.c')
-rw-r--r-- | target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_interrupt.c | 205 |
1 files changed, 0 insertions, 205 deletions
diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_interrupt.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_interrupt.c deleted file mode 100644 index fb6cbcdf1f..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_interrupt.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Interrupt related functions - * - */ -#include <rtl8367c_asicdrv_interrupt.h> -/* Function Name: - * rtl8367c_setAsicInterruptPolarity - * Description: - * Set interrupt trigger polarity - * Input: - * polarity - 0:pull high 1: pull low - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicInterruptPolarity(rtk_uint32 polarity) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_INTR_CTRL, RTL8367C_INTR_CTRL_OFFSET, polarity); -} -/* Function Name: - * rtl8367c_getAsicInterruptPolarity - * Description: - * Get interrupt trigger polarity - * Input: - * pPolarity - 0:pull high 1: pull low - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicInterruptPolarity(rtk_uint32* pPolarity) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_INTR_CTRL, RTL8367C_INTR_CTRL_OFFSET, pPolarity); -} -/* Function Name: - * rtl8367c_setAsicInterruptMask - * Description: - * Set interrupt enable mask - * Input: - * imr - Interrupt mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicInterruptMask(rtk_uint32 imr) -{ - return rtl8367c_setAsicReg(RTL8367C_REG_INTR_IMR, imr); -} -/* Function Name: - * rtl8367c_getAsicInterruptMask - * Description: - * Get interrupt enable mask - * Input: - * pImr - Interrupt mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicInterruptMask(rtk_uint32* pImr) -{ - return rtl8367c_getAsicReg(RTL8367C_REG_INTR_IMR, pImr); -} -/* Function Name: - * rtl8367c_setAsicInterruptMask - * Description: - * Clear interrupt enable mask - * Input: - * ims - Interrupt status mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * This API can be used to clear ASIC interrupt status and register will be cleared by writting 1. - * [0]:Link change, - * [1]:Share meter exceed, - * [2]:Learn number overed, - * [3]:Speed Change, - * [4]:Tx special congestion - * [5]:1 second green feature - * [6]:loop detection - * [7]:interrupt from 8051 - * [8]:Cable diagnostic finish - * [9]:ACL action interrupt trigger - * [11]: Silent Start - */ -ret_t rtl8367c_setAsicInterruptStatus(rtk_uint32 ims) -{ - return rtl8367c_setAsicReg(RTL8367C_REG_INTR_IMS, ims); -} -/* Function Name: - * rtl8367c_getAsicInterruptStatus - * Description: - * Get interrupt enable mask - * Input: - * pIms - Interrupt status mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicInterruptStatus(rtk_uint32* pIms) -{ - return rtl8367c_getAsicReg(RTL8367C_REG_INTR_IMS, pIms); -} -/* Function Name: - * rtl8367c_setAsicInterruptRelatedStatus - * Description: - * Clear interrupt status - * Input: - * type - per port Learn over, per-port speed change, per-port special congest, share meter exceed status - * status - exceed status, write 1 to clear - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicInterruptRelatedStatus(rtk_uint32 type, rtk_uint32 status) -{ - CONST rtk_uint32 indicatorAddress[INTRST_END] = {RTL8367C_REG_LEARN_OVER_INDICATOR, - RTL8367C_REG_SPEED_CHANGE_INDICATOR, - RTL8367C_REG_SPECIAL_CONGEST_INDICATOR, - RTL8367C_REG_PORT_LINKDOWN_INDICATOR, - RTL8367C_REG_PORT_LINKUP_INDICATOR, - RTL8367C_REG_METER_OVERRATE_INDICATOR0, - RTL8367C_REG_METER_OVERRATE_INDICATOR1, - RTL8367C_REG_RLDP_LOOPED_INDICATOR, - RTL8367C_REG_RLDP_RELEASED_INDICATOR, - RTL8367C_REG_SYSTEM_LEARN_OVER_INDICATOR}; - - if(type >= INTRST_END ) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicReg(indicatorAddress[type], status); -} -/* Function Name: - * rtl8367c_getAsicInterruptRelatedStatus - * Description: - * Get interrupt status - * Input: - * type - per port Learn over, per-port speed change, per-port special congest, share meter exceed status - * pStatus - exceed status, write 1 to clear - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicInterruptRelatedStatus(rtk_uint32 type, rtk_uint32* pStatus) -{ - CONST rtk_uint32 indicatorAddress[INTRST_END] = {RTL8367C_REG_LEARN_OVER_INDICATOR, - RTL8367C_REG_SPEED_CHANGE_INDICATOR, - RTL8367C_REG_SPECIAL_CONGEST_INDICATOR, - RTL8367C_REG_PORT_LINKDOWN_INDICATOR, - RTL8367C_REG_PORT_LINKUP_INDICATOR, - RTL8367C_REG_METER_OVERRATE_INDICATOR0, - RTL8367C_REG_METER_OVERRATE_INDICATOR1, - RTL8367C_REG_RLDP_LOOPED_INDICATOR, - RTL8367C_REG_RLDP_RELEASED_INDICATOR, - RTL8367C_REG_SYSTEM_LEARN_OVER_INDICATOR}; - - if(type >= INTRST_END ) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_getAsicReg(indicatorAddress[type], pStatus); -} - |