1 files changed, 200 insertions, 0 deletions
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi
new file mode 100644
index 0000000000..1553d2f7f4
--- /dev/null
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+	compatible = "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+		led-upgrade = &power_red;
+
+		led-dsl = &info_green;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		dect {
+			label = "dect";
+			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_PHONE>;
+		};
+
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WLAN>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		power_green: power {
+			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		power_red: power2 {
+			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+		};
+
+		info_green: info_green {
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi: wifi {
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+
+		info_red: info_red {
+			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+		};
+
+		dect: dect {
+			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		mtd-mac-address = <&urlader 0xa91>;
+		mtd-mac-address-increment = <(-2)>;
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rmii";
+			phy-handle = <&phy0>;
+		};
+
+		ethernet@1 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <1>;
+			phy-mode = "rmii";
+			phy-handle = <&phy1>;
+		};
+
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
+		};
+
+		ethernet@3 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "gmii";
+			phy-handle = <&phy13>;
+		};
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+
+		phy0: ethernet-phy@0 {
+			reg = <0x00>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <0x01>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+		};
+
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&gphy0 {
+	lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+	lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		phy-rst {
+			lantiq,pins = "io37", "io44";
+			lantiq,pull = <0>;
+			lantiq,open-drain;
+			lantiq,output = <1>;
+		};
+	};
+
+};
+
+&pcie0 {
+	status = "okay";
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <1>;
+		#address-cells = <2>;
+		device_type = "pci";
+
+		wifi@168c,002e {
+			compatible = "pci168c,002e";
+			reg = <0 0 0 0 0>;
+			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+		};
+	};
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_phy1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};