1 files changed, 55 insertions, 66 deletions
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi
index 09c95375d5..664327a861 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi
@@ -114,72 +114,6 @@
 	};
 };
 
-&eth0 {
-	interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-			gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
-		};
-
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <1>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-			gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
-		};
-
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy1: ethernet-phy@1 {
-			reg = <0x1>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
-
 &gphy0 {
 	lantiq,gphy-mode = <GPHY_MODE_GE>;
 };
@@ -208,6 +142,61 @@
 	};
 };
 
+&gswip {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+};
+
+&gswip_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0x0>;
+		gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <0x1>;
+		gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+	};
+
+	phy11: ethernet-phy@11 {
+		reg = <0x11>;
+	};
+
+	phy13: ethernet-phy@13 {
+		reg = <0x13>;
+	};
+};
+
+&gswip_ports {
+	port@0 {
+		reg = <0>;
+		label = "lan3";
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "lan4";
+		phy-mode = "rgmii";
+		phy-handle = <&phy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "lan2";
+		phy-mode = "internal";
+		phy-handle = <&phy11>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "lan1";
+		phy-mode = "internal";
+		phy-handle = <&phy13>;
+	};
+};
+
 &pcie0 {
 	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;