1 files changed, 112 insertions, 0 deletions
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_audiocodes_mp-252.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_audiocodes_mp-252.dts
new file mode 100644
index 0000000000..67b0f9631f
--- /dev/null
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_audiocodes_mp-252.dts
@@ -0,0 +1,112 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+/ {
+	compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube";
+	model = "AudioCodes MediaPack MP-252";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		exin {
+			lantiq,groups = "exin1";
+			lantiq,function = "exin";
+		};
+	};
+};
+
+&gsw {
+	phy-mode = "rmii";
+};
+
+&localbus {
+	flash@0 {
+		compatible = "lantiq,nor";
+		bank-width = <2>;
+		reg = <0 0x0 0x2000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x20000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "uboot_env";
+				reg = <0x20000 0x20000>;
+			};
+
+			partition@40000 {
+				label = "boardconfig";
+				reg = <0x40000 0x60000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "firmware";
+				reg = <0xa0000 0xf20000>;
+			};
+
+			partition@fc0000 {
+				label = "sysconfig";
+				reg = <0xfc0000 0x40000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs_data";
+				reg = <0x1000000 0x1000000>;
+			};
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+
+	pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+	pinctrl-names = "default";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+	status = "okay";
+	gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};