1 files changed, 0 insertions, 205 deletions
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ736X.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ736X.dtsi
deleted file mode 100644
index 9c1d2db8fa..0000000000
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ736X.dtsi
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-	compatible = "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-		led-upgrade = &power_green;
-		led-dsl = &info_green;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x8000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		dect {
-			label = "dect";
-			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_PHONE>;
-		};
-
-		wifi {
-			label = "wifi";
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WLAN>;
-		};
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-
-		power_green: power {
-			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		power_red: power2 {
-			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
-		};
-
-		info_green: info_green {
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-
-		wifi: wifi {
-			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
-		};
-
-		info_red: info_red {
-			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
-		};
-
-		dect: dect {
-			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		mtd-mac-address = <&urlader 0xa91>;
-		mtd-mac-address-increment = <(-2)>;
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rmii";
-			phy-handle = <&phy0>;
-		};
-
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <1>;
-			phy-mode = "rmii";
-			phy-handle = <&phy1>;
-		};
-
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		reg = <0>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0x00>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-		};
-
-		phy1: ethernet-phy@1 {
-			reg = <0x01>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-		};
-
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
-
-&gphy0 {
-	lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
-	lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: pinmux {
-		mdio {
-			lantiq,groups = "mdio";
-			lantiq,function = "mdio";
-		};
-
-		phy-rst {
-			lantiq,pins = "io37", "io44";
-			lantiq,pull = <0>;
-			lantiq,open-drain;
-			lantiq,output = <1>;
-		};
-	};
-
-};
-
-&pcie0 {
-	status = "okay";
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <1>;
-		#address-cells = <2>;
-		device_type = "pci";
-
-		wifi@168c,002e {
-			compatible = "pci168c,002e";
-			reg = <0 0 0 0 0>;
-			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
-		};
-	};
-};
-
-&usb_phy0 {
-	status = "okay";
-};
-
-&usb_phy1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};