diff options
Diffstat (limited to 'target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata')
| -rw-r--r-- | target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 58 |
1 files changed, 29 insertions, 29 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index a09678ca95..456017e30b 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -23,8 +23,8 @@ ath10kcal_die() { ath10kcal_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -37,8 +37,8 @@ ath10kcal_extract() { ath10kcal_ubi_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local ubidev local ubi @@ -97,8 +97,8 @@ case "$FIRMWARE" in "ath10k/cal-pci-0000:01:00.0.bin") case "$board" in meraki,mr33) - ath10kcal_ubi_extract "ART" 36864 2116 - ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116 + ath10kcal_ubi_extract "ART" 0x9000 0x844 + ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 0x9000 0x844 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1) ;; esac @@ -106,7 +106,7 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case "$board" in asus,map-ac2200) - ath10kcal_ubi_extract "Factory" 36864 12064 + ath10kcal_ubi_extract "Factory" 0x9000 0x2f20 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; @@ -115,12 +115,12 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; linksys,ea8300) - ath10kcal_extract "ART" 36864 12064 + ath10kcal_extract "ART" 0x9000 0x2f20 # OEM assigns 4 sequential MACs ath10kcal_patch_mac_crc $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4)) ;; openmesh,a62) - ath10kcal_extract "0:ART" 36864 12064 + ath10kcal_extract "0:ART" 0x9000 0x2f20 ;; esac ;; @@ -131,14 +131,14 @@ case "$FIRMWARE" in glinet,gl-b1300 |\ linksys,ea6350v3 |\ qcom,ap-dk01.1-c1) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ;; asus,map-ac2200) - ath10kcal_ubi_extract "Factory" 4096 12064 + ath10kcal_ubi_extract "Factory" 0x1000 0x2f20 ;; asus,rt-ac58u) CI_UBIPART=UBI_DEV - ath10kcal_ubi_extract "Factory" 4096 12064 + ath10kcal_ubi_extract "Factory" 0x1000 0x2f20 ;; avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") @@ -154,29 +154,29 @@ case "$FIRMWARE" in openmesh,a62 |\ qxwlan,e2600ac-c1 |\ qxwlan,e2600ac-c2) - ath10kcal_extract "0:ART" 4096 12064 + ath10kcal_extract "0:ART" 0x1000 0x2f20 ;; engenius,ens620ext) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2) ;; linksys,ea8300) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2) ;; meraki,mr33) - ath10kcal_ubi_extract "ART" 4096 12064 - ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064 + ath10kcal_ubi_extract "ART" 0x1000 0x2f20 + ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2) ;; netgear,ex6100v2 |\ netgear,ex6150v2) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0x0) ;; zyxel,nbg6617 |\ zyxel,wre6606) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; esac @@ -188,14 +188,14 @@ case "$FIRMWARE" in glinet,gl-b1300 |\ linksys,ea6350v3 |\ qcom,ap-dk01.1-c1) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ;; asus,map-ac2200) - ath10kcal_ubi_extract "Factory" 20480 12064 + ath10kcal_ubi_extract "Factory" 0x5000 0x2f20 ;; asus,rt-ac58u) CI_UBIPART=UBI_DEV - ath10kcal_ubi_extract "Factory" 20480 12064 + ath10kcal_ubi_extract "Factory" 0x5000 0x2f20 ;; avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") @@ -211,29 +211,29 @@ case "$FIRMWARE" in openmesh,a62 |\ qxwlan,e2600ac-c1 |\ qxwlan,e2600ac-c2) - ath10kcal_extract "0:ART" 20480 12064 + ath10kcal_extract "0:ART" 0x5000 0x2f20 ;; engenius,ens620ext) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3) ;; linksys,ea8300) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3) ;; meraki,mr33) - ath10kcal_ubi_extract "ART" 20480 12064 - ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064 + ath10kcal_ubi_extract "ART" 0x5000 0x2f20 + ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3) ;; netgear,ex6100v2 |\ netgear,ex6150v2) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0xc) ;; zyxel,nbg6617 |\ zyxel,wre6606) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; esac |