diff options
Diffstat (limited to 'target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata')
| -rw-r--r-- | target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 42cb295496..87876ad844 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -12,7 +12,7 @@ case "$FIRMWARE" in meraki,mr33) caldata_extract_ubi "ART" 0x9000 0x844 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844 - ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1) + ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1) ;; esac ;; @@ -128,7 +128,7 @@ case "$FIRMWARE" in ;; engenius,ens620ext) caldata_extract "ART" 0x1000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2) ;; linksys,ea8300 |\ linksys,mr8300) @@ -138,7 +138,7 @@ case "$FIRMWARE" in meraki,mr33) caldata_extract_ubi "ART" 0x1000 0x2f20 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20 - ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2) + ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2) ;; mikrotik,hap-ac2) wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data" @@ -180,7 +180,7 @@ case "$FIRMWARE" in aruba,ap-303h |\ aruba,ap-365) caldata_extract "ART" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) 1) ;; asus,map-ac2200) caldata_extract_ubi "Factory" 0x5000 0x2f20 @@ -233,15 +233,15 @@ case "$FIRMWARE" in ;; engenius,emd1) caldata_extract "0:ART" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1) ;; engenius,emr3500) caldata_extract "0:ART" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1) ;; engenius,ens620ext) caldata_extract "ART" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3) ;; linksys,ea8300 |\ linksys,mr8300) @@ -251,7 +251,7 @@ case "$FIRMWARE" in meraki,mr33) caldata_extract_ubi "ART" 0x5000 0x2f20 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3) + ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3) ;; mikrotik,hap-ac2|\ mikrotik,sxtsq-5-ac) @@ -266,7 +266,7 @@ case "$FIRMWARE" in ;; netgear,wac510) caldata_extract "0:ART" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) +16) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) 16) ;; zyxel,nbg6617 |\ zyxel,wre6606) |