diff options
Diffstat (limited to 'target/linux/generic/backport-5.15/791-v6.3-08-net-phy-Add-dts-support-for-Motorcomm-yt8531s-gigabit.patch')
| -rw-r--r-- | target/linux/generic/backport-5.15/791-v6.3-08-net-phy-Add-dts-support-for-Motorcomm-yt8531s-gigabit.patch | 100 |
1 files changed, 100 insertions, 0 deletions
diff --git a/target/linux/generic/backport-5.15/791-v6.3-08-net-phy-Add-dts-support-for-Motorcomm-yt8531s-gigabit.patch b/target/linux/generic/backport-5.15/791-v6.3-08-net-phy-Add-dts-support-for-Motorcomm-yt8531s-gigabit.patch new file mode 100644 index 0000000000..86fc04695c --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.3-08-net-phy-Add-dts-support-for-Motorcomm-yt8531s-gigabit.patch @@ -0,0 +1,100 @@ +From 36152f87dda4af221b16258751451d9cd3d0fb0b Mon Sep 17 00:00:00 2001 +From: Frank Sae <Frank.Sae@motor-comm.com> +Date: Thu, 2 Feb 2023 11:00:36 +0800 +Subject: [PATCH] net: phy: Add dts support for Motorcomm yt8531s gigabit + ethernet phy + +Add dts support for Motorcomm yt8531s gigabit ethernet phy. + Change yt8521_probe to support clk config of yt8531s. Becase + yt8521_probe does the things which yt8531s is needed, so + removed yt8531s function. + This patch has been verified on AM335x platform with yt8531s board. + +Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com> +Reviewed-by: Andrew Lunn <andrew@lunn.ch> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/phy/motorcomm.c | 51 ++++++++++++++++++++----------------- + 1 file changed, 27 insertions(+), 24 deletions(-) + +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -258,8 +258,6 @@ + #define YT8531_SCR_CLK_SRC_CLOCK_FROM_DIGITAL 3 + #define YT8531_SCR_CLK_SRC_REF_25M 4 + #define YT8531_SCR_CLK_SRC_SSC_25M 5 +-#define YT8531S_SYNCE_CFG_REG 0xA012 +-#define YT8531S_SCR_SYNCE_ENABLE BIT(6) + + /* Extended Register end */ + +@@ -858,7 +856,32 @@ static int yt8521_probe(struct phy_devic + return -EINVAL; + } + } else if (phydev->drv->phy_id == PHY_ID_YT8531S) { +- return 0; ++ switch (freq) { ++ case YTPHY_DTS_OUTPUT_CLK_DIS: ++ mask = YT8531_SCR_SYNCE_ENABLE; ++ val = 0; ++ break; ++ case YTPHY_DTS_OUTPUT_CLK_25M: ++ mask = YT8531_SCR_SYNCE_ENABLE | ++ YT8531_SCR_CLK_SRC_MASK | ++ YT8531_SCR_CLK_FRE_SEL_125M; ++ val = YT8531_SCR_SYNCE_ENABLE | ++ FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, ++ YT8531_SCR_CLK_SRC_REF_25M); ++ break; ++ case YTPHY_DTS_OUTPUT_CLK_125M: ++ mask = YT8531_SCR_SYNCE_ENABLE | ++ YT8531_SCR_CLK_SRC_MASK | ++ YT8531_SCR_CLK_FRE_SEL_125M; ++ val = YT8531_SCR_SYNCE_ENABLE | ++ YT8531_SCR_CLK_FRE_SEL_125M | ++ FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, ++ YT8531_SCR_CLK_SRC_PLL_125M); ++ break; ++ default: ++ phydev_warn(phydev, "Freq err:%u\n", freq); ++ return -EINVAL; ++ } + } else { + phydev_warn(phydev, "PHY id err\n"); + return -EINVAL; +@@ -869,26 +892,6 @@ static int yt8521_probe(struct phy_devic + } + + /** +- * yt8531s_probe() - read chip config then set suitable polling_mode +- * @phydev: a pointer to a &struct phy_device +- * +- * returns 0 or negative errno code +- */ +-static int yt8531s_probe(struct phy_device *phydev) +-{ +- int ret; +- +- /* Disable SyncE clock output by default */ +- ret = ytphy_modify_ext_with_lock(phydev, YT8531S_SYNCE_CFG_REG, +- YT8531S_SCR_SYNCE_ENABLE, 0); +- if (ret < 0) +- return ret; +- +- /* same as yt8521_probe */ +- return yt8521_probe(phydev); +-} +- +-/** + * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp + * @phydev: a pointer to a &struct phy_device + * +@@ -1970,7 +1973,7 @@ static struct phy_driver motorcomm_phy_d + PHY_ID_MATCH_EXACT(PHY_ID_YT8531S), + .name = "YT8531S Gigabit Ethernet", + .get_features = yt8521_get_features, +- .probe = yt8531s_probe, ++ .probe = yt8521_probe, + .read_page = yt8521_read_page, + .write_page = yt8521_write_page, + .get_wol = ytphy_get_wol, |