diff options
Diffstat (limited to 'target/linux/generic/backport-5.15/750-v6.5-02-net-ethernet-mtk_eth_soc-remove-incorrect-PLL-config.patch')
-rw-r--r-- | target/linux/generic/backport-5.15/750-v6.5-02-net-ethernet-mtk_eth_soc-remove-incorrect-PLL-config.patch | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/target/linux/generic/backport-5.15/750-v6.5-02-net-ethernet-mtk_eth_soc-remove-incorrect-PLL-config.patch b/target/linux/generic/backport-5.15/750-v6.5-02-net-ethernet-mtk_eth_soc-remove-incorrect-PLL-config.patch new file mode 100644 index 0000000000..681022078c --- /dev/null +++ b/target/linux/generic/backport-5.15/750-v6.5-02-net-ethernet-mtk_eth_soc-remove-incorrect-PLL-config.patch @@ -0,0 +1,141 @@ +From 8cfa2576d79f9379d167a8994f0fca935c07a8bc Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> +Date: Sat, 22 Jul 2023 21:32:49 +0100 +Subject: [PATCH 096/250] net: ethernet: mtk_eth_soc: remove incorrect PLL + configuration + +MT7623 GMAC0 attempts to configure the system clocking according to the +required speed in the .mac_config callback for non-SGMII, non-baseX and +non-TRGMII modes. + +state->speed setting has never been reliable in the .mac_config +callback - there are cases where this is not the link speed, +particularly via ethtool paths, so this has always been unreliable (as +detailed in phylink's documentation.) + +There is the additional issue that mtk_gmac0_rgmii_adjust() will only +be called if state->interface changes, which means it only configures +the system clocking on the very first .mac_config call, which will be +made when the network device is first brought up before any link is +established. + +Essentially, this code is incredibly buggy, and probably never worked. + +Moreover, checking the in-kernel DT files, it seems no platform makes +use of this code path. + +Therefore, let's remove it, and disable interface modes for port 0 that +are not SGMII, 1000base-X, 2500base-X or TRGMII on the MT7623. + +Reviewed-by: Daniel Golle <daniel@makrotopia.org> +Tested-by: Daniel Golle <daniel@makrotopia.org> +Tested-by: Frank Wunderlich <frank-w@public-files.de> +Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> +Signed-off-by: Paolo Abeni <pabeni@redhat.com> +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 54 ++++++--------------- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 + + 2 files changed, 17 insertions(+), 38 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -309,7 +309,7 @@ static int mt7621_gmac0_rgmii_adjust(str + } + + static void mtk_gmac0_rgmii_adjust(struct mtk_eth *eth, +- phy_interface_t interface, int speed) ++ phy_interface_t interface) + { + u32 val; + int ret; +@@ -323,26 +323,7 @@ static void mtk_gmac0_rgmii_adjust(struc + return; + } + +- val = (speed == SPEED_1000) ? +- INTF_MODE_RGMII_1000 : INTF_MODE_RGMII_10_100; +- mtk_w32(eth, val, INTF_MODE); +- +- regmap_update_bits(eth->ethsys, ETHSYS_CLKCFG0, +- ETHSYS_TRGMII_CLK_SEL362_5, +- ETHSYS_TRGMII_CLK_SEL362_5); +- +- val = (speed == SPEED_1000) ? 250000000 : 500000000; +- ret = clk_set_rate(eth->clks[MTK_CLK_TRGPLL], val); +- if (ret) +- dev_err(eth->dev, "Failed to set trgmii pll: %d\n", ret); +- +- val = (speed == SPEED_1000) ? +- RCK_CTRL_RGMII_1000 : RCK_CTRL_RGMII_10_100; +- mtk_w32(eth, val, TRGMII_RCK_CTRL); +- +- val = (speed == SPEED_1000) ? +- TCK_CTRL_RGMII_1000 : TCK_CTRL_RGMII_10_100; +- mtk_w32(eth, val, TRGMII_TCK_CTRL); ++ dev_err(eth->dev, "Missing PLL configuration, ethernet may not work\n"); + } + + static struct phylink_pcs *mtk_mac_select_pcs(struct phylink_config *config, +@@ -428,17 +409,8 @@ static void mtk_mac_config(struct phylin + state->interface)) + goto err_phy; + } else { +- /* FIXME: this is incorrect. Not only does it +- * use state->speed (which is not guaranteed +- * to be correct) but it also makes use of it +- * in a code path that will only be reachable +- * when the PHY interface mode changes, not +- * when the speed changes. Consequently, RGMII +- * is probably broken. +- */ + mtk_gmac0_rgmii_adjust(mac->hw, +- state->interface, +- state->speed); ++ state->interface); + + /* mt7623_pad_clk_setup */ + for (i = 0 ; i < NUM_TRGMII_CTRL; i++) +@@ -4286,13 +4258,19 @@ static int mtk_add_mac(struct mtk_eth *e + mac->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD; + +- __set_bit(PHY_INTERFACE_MODE_MII, +- mac->phylink_config.supported_interfaces); +- __set_bit(PHY_INTERFACE_MODE_GMII, +- mac->phylink_config.supported_interfaces); ++ /* MT7623 gmac0 is now missing its speed-specific PLL configuration ++ * in its .mac_config method (since state->speed is not valid there. ++ * Disable support for MII, GMII and RGMII. ++ */ ++ if (!mac->hw->soc->disable_pll_modes || mac->id != 0) { ++ __set_bit(PHY_INTERFACE_MODE_MII, ++ mac->phylink_config.supported_interfaces); ++ __set_bit(PHY_INTERFACE_MODE_GMII, ++ mac->phylink_config.supported_interfaces); + +- if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_RGMII)) +- phy_interface_set_rgmii(mac->phylink_config.supported_interfaces); ++ if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_RGMII)) ++ phy_interface_set_rgmii(mac->phylink_config.supported_interfaces); ++ } + + if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_TRGMII) && !mac->id) + __set_bit(PHY_INTERFACE_MODE_TRGMII, +@@ -4752,6 +4730,7 @@ static const struct mtk_soc_data mt7623_ + .offload_version = 1, + .hash_offset = 2, + .foe_entry_size = MTK_FOE_ENTRY_V1_SIZE, ++ .disable_pll_modes = true, + .txrx = { + .txd_size = sizeof(struct mtk_tx_dma), + .rxd_size = sizeof(struct mtk_rx_dma), +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -1027,6 +1027,7 @@ struct mtk_soc_data { + u16 foe_entry_size; + netdev_features_t hw_features; + bool has_accounting; ++ bool disable_pll_modes; + struct { + u32 txd_size; + u32 rxd_size; |