diff options
Diffstat (limited to 'target/linux/generic/backport-5.10/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch')
-rw-r--r-- | target/linux/generic/backport-5.10/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch | 127 |
1 files changed, 0 insertions, 127 deletions
diff --git a/target/linux/generic/backport-5.10/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch b/target/linux/generic/backport-5.10/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch deleted file mode 100644 index e464452d82..0000000000 --- a/target/linux/generic/backport-5.10/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch +++ /dev/null @@ -1,127 +0,0 @@ -From 6c43809bf1bee76c434e365a26546a92a5fbec14 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith <ansuelsmth@gmail.com> -Date: Thu, 14 Oct 2021 00:39:08 +0200 -Subject: net: dsa: qca8k: add support for sgmii falling edge - -Add support for this in the qca8k driver. Also add support for SGMII -rx/tx clock falling edge. This is only present for pad0, pad5 and -pad6 have these bit reserved from Documentation. Add a comment that this -is hardcoded to PAD0 as qca8327/28/34/37 have an unique sgmii line and -setting falling in port0 applies to both configuration with sgmii used -for port0 or port6. - -Co-developed-by: Matthew Hagan <mnhagan88@gmail.com> -Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> -Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/dsa/qca8k.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++ - drivers/net/dsa/qca8k.h | 4 ++++ - 2 files changed, 67 insertions(+) - ---- a/drivers/net/dsa/qca8k.c -+++ b/drivers/net/dsa/qca8k.c -@@ -978,6 +978,42 @@ qca8k_setup_mac_pwr_sel(struct qca8k_pri - } - - static int -+qca8k_parse_port_config(struct qca8k_priv *priv) -+{ -+ struct device_node *port_dn; -+ phy_interface_t mode; -+ struct dsa_port *dp; -+ int port, ret; -+ -+ /* We have 2 CPU port. Check them */ -+ for (port = 0; port < QCA8K_NUM_PORTS; port++) { -+ /* Skip every other port */ -+ if (port != 0 && port != 6) -+ continue; -+ -+ dp = dsa_to_port(priv->ds, port); -+ port_dn = dp->dn; -+ -+ if (!of_device_is_available(port_dn)) -+ continue; -+ -+ ret = of_get_phy_mode(port_dn, &mode); -+ if (ret) -+ continue; -+ -+ if (mode == PHY_INTERFACE_MODE_SGMII) { -+ if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) -+ priv->sgmii_tx_clk_falling_edge = true; -+ -+ if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) -+ priv->sgmii_rx_clk_falling_edge = true; -+ } -+ } -+ -+ return 0; -+} -+ -+static int - qca8k_setup(struct dsa_switch *ds) - { - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; -@@ -990,6 +1026,11 @@ qca8k_setup(struct dsa_switch *ds) - return -EINVAL; - } - -+ /* Parse CPU port config to be later used in phy_link mac_config */ -+ ret = qca8k_parse_port_config(priv); -+ if (ret) -+ return ret; -+ - mutex_init(&priv->reg_mutex); - - /* Start by setting up the register mapping */ -@@ -1274,6 +1315,28 @@ qca8k_phylink_mac_config(struct dsa_swit - } - - qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val); -+ -+ /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and -+ * falling edge is set writing in the PORT0 PAD reg -+ */ -+ if (priv->switch_id == QCA8K_ID_QCA8327 || -+ priv->switch_id == QCA8K_ID_QCA8337) -+ reg = QCA8K_REG_PORT0_PAD_CTRL; -+ -+ val = 0; -+ -+ /* SGMII Clock phase configuration */ -+ if (priv->sgmii_rx_clk_falling_edge) -+ val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; -+ -+ if (priv->sgmii_tx_clk_falling_edge) -+ val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; -+ -+ if (val) -+ ret = qca8k_rmw(priv, reg, -+ QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | -+ QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, -+ val); - break; - default: - dev_err(ds->dev, "xMII mode %s not supported for port %d\n", ---- a/drivers/net/dsa/qca8k.h -+++ b/drivers/net/dsa/qca8k.h -@@ -35,6 +35,8 @@ - #define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8) - #define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8) - #define QCA8K_REG_PORT0_PAD_CTRL 0x004 -+#define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19) -+#define QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE BIT(18) - #define QCA8K_REG_PORT5_PAD_CTRL 0x008 - #define QCA8K_REG_PORT6_PAD_CTRL 0x00c - #define QCA8K_PORT_PAD_RGMII_EN BIT(26) -@@ -260,6 +262,8 @@ struct qca8k_priv { - u8 switch_revision; - u8 rgmii_tx_delay; - u8 rgmii_rx_delay; -+ bool sgmii_rx_clk_falling_edge; -+ bool sgmii_tx_clk_falling_edge; - bool legacy_phy_port_mapping; - struct regmap *regmap; - struct mii_bus *bus; |