diff options
Diffstat (limited to 'target/linux/brcm63xx/base-files')
4 files changed, 65 insertions, 39 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network index 08b8558006..106bf5f86f 100755 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network @@ -14,40 +14,88 @@ ucidef_set_interface_loopback case "$board_name" in -96328avng |\ -96328A-1241N |\ -96328A-1441N1 |\ -963281TAN |\ -963281T_TEF |\ -96348A-122 |\ +96348W3 |\ 96358-502V |\ -CT6373-1 |\ -AW4339U |\ +SPW500V) + ucidef_set_interface_lan "eth0" + ;; + +96338GW |\ +96338W |\ +96338W2_E7T |\ +96348A-122 |\ +96348W3 |\ CPVA642 |\ CT536_CT5621 |\ +CT6373-1 |\ D-4P-W |\ "F@ST2604" |\ -HW556* |\ -NB6 |\ -SPW303V |\ -SPW500V |\ -V2110 |\ -96348W3) +RTA1320_16M |\ +RTA770BW |\ +V2110) ucidef_set_interface_lan "eth0" + ucidef_add_switch "eth0" "1" "1" + ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5" + ;; + +96348GW |\ +96348GW-10 |\ +96348GW-11 |\ +96348GW-A |\ +96358VW |\ +96358VW2 |\ +AGPF-S0 |\ +"CPVA502+" |\ +DV201AMR |\ +DWV-S0 |\ +"F@ST2404" |\ +HW553 |\ +MAGIC |\ +RTA1025W_16 |\ +V2500V_BB) + ucidef_set_interfaces_lan_wan "eth1" "eth0" + ucidef_add_switch "eth1" "1" "1" + ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5" ;; -AW4139) +AW4139 |\ +HW556*) ucidef_set_interface_lan "eth0.1" ucidef_add_switch "eth0" "1" "1" ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5t" ;; +NB4-* |\ DVG3810BN) ucidef_set_interfaces_lan_wan "eth1.1" "eth0" ucidef_add_switch "eth1" "1" "1" ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5t" ;; +96328avng |\ +96328A-1241N |\ +96328A-1441N1 |\ +963281TAN |\ +963281T_TEF |\ +96368MVNgr) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "eth0" "1" "1" + ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 8t" + ;; + +96368MVWG) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "eth0" "1" "1" + ucidef_add_switch_vlan "eth0" "1" "1 2 4 5 8t" + ;; + +NB6) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t" + ucidef_add_switch_vlan "switch0" "2" "0 9t" + ;; + *) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh index 999f775171..8116e807dd 100755 --- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh +++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh @@ -13,7 +13,7 @@ brcm63xx_has_reset_button="" brcm63xx_detect() { board_name=$(awk 'BEGIN{FS="[ \t:/]+"} /system type/ {print $4}' /proc/cpuinfo) - if [ "$board_name" = "96358VW" ] && [ -e /proc/switch/eth1/enable ]; then + if [ "$board_name" = "96358VW" ] && [ -n "$(swconfig dev eth1 help 2>/dev/null)" ]; then board_name="DVAG3810BN" fi diff --git a/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx b/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx index 43da8cc068..e1653e3936 100644 --- a/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx +++ b/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx @@ -1,11 +1,6 @@ #!/bin/sh failsafe_ip() { - [ -d "/proc/switch/$ifname" ] && { - ifconfig "$ifname" 0.0.0.0 down - echo "0 1 2 3 4 ${cpu_port:-5u*}" > "/proc/switch/$ifname/vlan/0/ports" - } - [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up } diff --git a/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx b/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx index 9d366fa339..7655fb7d53 100644 --- a/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx +++ b/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx @@ -16,29 +16,12 @@ preinit_ip_deconfig() { ifconfig $pi_ifname 0.0.0.0 down } fi - [ -d "/proc/switch/$ifname" ] && { - echo 1 > "/proc/switch/$ifname/reset" - echo "0 1 2 3 4 ${cpu_port:-5u*}" > "/proc/switch/$ifname/vlan/0/ports" - } - } preinit_net_echo() { preinit_ip - - [ -d "/proc/switch/$ifname" ] && { - echo 1 > "/proc/switch/$ifname/reset" - # this would be easier if we blasted the message across all ports - # but we don't want packets leaking across interfaces - for port in $(seq 0 4); do { - echo "$port ${cpu_port:-5u*}" > "/proc/switch/$ifname/vlan/0/ports" - port_net_echo $1 - }; done - - echo "0 ${cpu_port:-5u*}" > "/proc/switch/$ifname/vlan/0/ports" - - } || port_net_echo $1 + port_net_echo $1 } |