aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm47xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm47xx')
-rw-r--r--target/linux/brcm47xx/config-3.2142
-rw-r--r--target/linux/brcm47xx/patches-3.2/0012-bcma-move-parallel-flash-into-a-union.patch142
-rw-r--r--target/linux/brcm47xx/patches-3.2/0013-bcma-add-serial-flash-support-to-bcma.patch681
-rw-r--r--target/linux/brcm47xx/patches-3.2/0014-ssb-move-flash-to-chipcommon.patch149
-rw-r--r--target/linux/brcm47xx/patches-3.2/0015-ssb-add-serial-flash-support.patch697
-rw-r--r--target/linux/brcm47xx/patches-3.2/0016-brcm47xx-add-common-interface-for-sflash.patch193
-rw-r--r--target/linux/brcm47xx/patches-3.2/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch585
-rw-r--r--target/linux/brcm47xx/patches-3.2/0018-mtd-bcm47xx-add-parallel-flash-driver.patch230
-rw-r--r--target/linux/brcm47xx/patches-3.2/0019-mtd-bcm47xx-add-serial-flash-driver.patch315
-rw-r--r--target/linux/brcm47xx/patches-3.2/0020-bcm47xx-register-flash-drivers.patch100
-rw-r--r--target/linux/brcm47xx/patches-3.2/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch33
-rw-r--r--target/linux/brcm47xx/patches-3.2/0025-bcm47xx-read-nvram-from-sflash.patch118
-rw-r--r--target/linux/brcm47xx/patches-3.2/0026-bcma-export-needed-gpio-functions.patch47
-rw-r--r--target/linux/brcm47xx/patches-3.2/0028-bcma-scan-for-extra-address-space.patch60
-rw-r--r--target/linux/brcm47xx/patches-3.2/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch115
-rw-r--r--target/linux/brcm47xx/patches-3.2/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch291
-rw-r--r--target/linux/brcm47xx/patches-3.2/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch265
-rw-r--r--target/linux/brcm47xx/patches-3.2/0032-USB-Add-driver-for-the-bcma-bus.patch358
-rw-r--r--target/linux/brcm47xx/patches-3.2/0033-USB-Add-driver-for-the-ssb-bus.patch325
-rw-r--r--target/linux/brcm47xx/patches-3.2/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch357
-rw-r--r--target/linux/brcm47xx/patches-3.2/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch69
-rw-r--r--target/linux/brcm47xx/patches-3.2/016-MIPS-BCM47xx-Remove-CFE-console.patch141
-rw-r--r--target/linux/brcm47xx/patches-3.2/019-fix-boot.patch42
-rw-r--r--target/linux/brcm47xx/patches-3.2/040-bcm47xx-add-gpio_set_debounce.patch12
-rw-r--r--target/linux/brcm47xx/patches-3.2/150-cpu_fixes.patch367
-rw-r--r--target/linux/brcm47xx/patches-3.2/160-kmap_coherent.patch77
-rw-r--r--target/linux/brcm47xx/patches-3.2/210-b44_phy_fix.patch61
-rw-r--r--target/linux/brcm47xx/patches-3.2/211-b44_timeout_spam.patch15
-rw-r--r--target/linux/brcm47xx/patches-3.2/220-bcm5354.patch42
-rw-r--r--target/linux/brcm47xx/patches-3.2/280-activate_ssb_support_in_usb.patch25
-rw-r--r--target/linux/brcm47xx/patches-3.2/300-fork_cacheflush.patch11
-rw-r--r--target/linux/brcm47xx/patches-3.2/301-kmod-fuse-dcache-bug-r4k.patch28
-rw-r--r--target/linux/brcm47xx/patches-3.2/302-kmod-fuse-dcache-bug-fuse.patch46
-rw-r--r--target/linux/brcm47xx/patches-3.2/310-no_highpage.patch66
-rw-r--r--target/linux/brcm47xx/patches-3.2/400-arch-bcm47xx.patch56
-rw-r--r--target/linux/brcm47xx/patches-3.2/601-mips-remove-pci-collision-check.patch18
-rw-r--r--target/linux/brcm47xx/patches-3.2/610-pci_ide_fix.patch14
-rw-r--r--target/linux/brcm47xx/patches-3.2/700-ssb-gigabit-ethernet-driver.patch325
-rw-r--r--target/linux/brcm47xx/patches-3.2/812-disable_wgt634u_crap.patch180
-rw-r--r--target/linux/brcm47xx/patches-3.2/820-wgt634u-nvram-fix.patch305
-rw-r--r--target/linux/brcm47xx/patches-3.2/830-tg3_add_pci_ids.patch47
-rw-r--r--target/linux/brcm47xx/patches-3.2/900-bcm47xx_wdt-noprescale.patch104
-rw-r--r--target/linux/brcm47xx/patches-3.2/920-cache-wround.patch138
-rw-r--r--target/linux/brcm47xx/patches-3.2/940-bcm47xx-yenta.patch46
-rw-r--r--target/linux/brcm47xx/patches-3.2/976-ssb_increase_pci_delay.patch11
-rw-r--r--target/linux/brcm47xx/patches-3.2/980-wnr834b_no_cardbus_invariant.patch13
-rw-r--r--target/linux/brcm47xx/patches-3.2/999-wl_exports.patch22
47 files changed, 7484 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/config-3.2 b/target/linux/brcm47xx/config-3.2
new file mode 100644
index 0000000000..eeead0b0ae
--- /dev/null
+++ b/target/linux/brcm47xx/config-3.2
@@ -0,0 +1,142 @@
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARPD is not set
+# CONFIG_ATH79 is not set
+CONFIG_B44=y
+CONFIG_B44_PCI=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_BCM47XX=y
+CONFIG_BCM47XX_BCMA=y
+CONFIG_BCM47XX_SSB=y
+CONFIG_BCM47XX_WDT=y
+CONFIG_BCMA=y
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_DEBUG=y
+CONFIG_BCMA_DRIVER_MIPS=y
+CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_BCMA_SFLASH=y
+# CONFIG_BUG is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CFE=y
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_KALLSYMS=y
+# CONFIG_LANTIQ is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MLX4_CORE is not set
+CONFIG_MTD_BCM47XX_PARTS=y
+CONFIG_MTD_BCM47XX_PFLASH=y
+CONFIG_MTD_BCM47XX_SFLASH=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_HZ=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_RSA is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SSB=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_DEBUG=y
+CONFIG_SSB_DRIVER_EXTIF=y
+CONFIG_SSB_DRIVER_GIGE=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_PCICORE_HOSTMODE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_SFLASH=y
+CONFIG_SSB_SPROM=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+# CONFIG_USB_HCD_BCMA is not set
+# CONFIG_USB_HCD_SSB is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm47xx/patches-3.2/0012-bcma-move-parallel-flash-into-a-union.patch b/target/linux/brcm47xx/patches-3.2/0012-bcma-move-parallel-flash-into-a-union.patch
new file mode 100644
index 0000000000..11855b4496
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0012-bcma-move-parallel-flash-into-a-union.patch
@@ -0,0 +1,142 @@
+From b7d9f9cd6a8e463c1061ea29ed3e614403625024 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 17 Jul 2011 14:51:47 +0200
+Subject: [PATCH 12/26] bcma: move parallel flash into a union
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/nvram.c | 3 +
+ drivers/bcma/driver_mips.c | 1 +
+ include/linux/bcma/bcma_driver_chipcommon.h | 73 ++++++++++++++++++++++++++-
+ 3 files changed, 76 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -50,6 +50,9 @@ static void early_nvram_init(void)
+ #ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
++ if (bcma_cc->flash_type != BCMA_PFLASH)
++ return;
++
+ base = bcma_cc->pflash.window;
+ lim = bcma_cc->pflash.window_size;
+ break;
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -189,6 +189,7 @@ static void bcma_core_mips_flash_detect(
+ break;
+ case BCMA_CC_FLASHT_PARA:
+ pr_info("found parallel flash.\n");
++ bus->drv_cc.flash_type = BCMA_PFLASH;
+ bus->drv_cc.pflash.window = 0x1c000000;
+ bus->drv_cc.pflash.window_size = 0x02000000;
+
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -108,10 +108,68 @@
+ #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
+ #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
+ #define BCMA_CC_FLASHCTL 0x0040
++
++/* Start/busy bit in flashcontrol */
++#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff
++#define BCMA_CC_FLASHCTL_ACTION 0x00000700
++#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */
+ #define BCMA_CC_FLASHCTL_START 0x80000000
+ #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
++
++/* flashcontrol action+opcodes for ST flashes */
++#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */
++#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */
++#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */
++#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */
++#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */
++#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */
++#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */
++#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */
++#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */
++#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */
++#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
++#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
++
++
++/* flashcontrol action+opcodes for Atmel flashes */
++#define BCMA_CC_FLASHCTL_AT_READ 0x07e8
++#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2
++#define BCMA_CC_FLASHCTL_AT_BUF1_READ
++#define BCMA_CC_FLASHCTL_AT_BUF2_READ
++#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7
++#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384
++#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387
++#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283
++#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286
++#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288
++#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289
++#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281
++#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250
++#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
++#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
++#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253
++#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255
++#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260
++#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261
++#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258
++#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259
++
+ #define BCMA_CC_FLASHADDR 0x0044
+ #define BCMA_CC_FLASHDATA 0x0048
++
++/* Status register bits for ST flashes */
++#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */
++#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */
++#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */
++#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2
++#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */
++
++/* Status register bits for Atmel flashes */
++#define BCMA_CC_FLASHDATA_AT_READY 0x80
++#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40
++#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38
++#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3
++
+ #define BCMA_CC_BCAST_ADDR 0x0050
+ #define BCMA_CC_BCAST_DATA 0x0054
+ #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
+@@ -300,6 +358,12 @@
+ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */
+ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */
+
++#define BCMA_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
++#define BCMA_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
++#define BCMA_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */
++#define BCMA_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */
++
++
+ /* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+@@ -309,6 +373,10 @@ struct bcma_chipcommon_pmu {
+ };
+
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
++enum bcma_flash_type {
++ BCMA_PFLASH,
++};
++
+ struct bcma_pflash {
+ u8 buswidth;
+ u32 window;
+@@ -334,7 +402,10 @@ struct bcma_drv_cc {
+ u16 fast_pwrup_delay;
+ struct bcma_chipcommon_pmu pmu;
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+- struct bcma_pflash pflash;
++ enum bcma_flash_type flash_type;
++ union {
++ struct bcma_pflash pflash;
++ };
+
+ int nr_serial_ports;
+ struct bcma_serial_port serial_ports[4];
diff --git a/target/linux/brcm47xx/patches-3.2/0013-bcma-add-serial-flash-support-to-bcma.patch b/target/linux/brcm47xx/patches-3.2/0013-bcma-add-serial-flash-support-to-bcma.patch
new file mode 100644
index 0000000000..e78f3c4576
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0013-bcma-add-serial-flash-support-to-bcma.patch
@@ -0,0 +1,681 @@
+From a62940e988526c881966a8c72cc28c95fca89f3c Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 17 Jul 2011 14:53:07 +0200
+Subject: [PATCH 13/26] bcma: add serial flash support to bcma
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/Kconfig | 5 +
+ drivers/bcma/Makefile | 1 +
+ drivers/bcma/bcma_private.h | 5 +
+ drivers/bcma/driver_chipcommon_sflash.c | 555 +++++++++++++++++++++++++++
+ drivers/bcma/driver_mips.c | 8 +-
+ include/linux/bcma/bcma_driver_chipcommon.h | 24 ++
+ 6 files changed, 597 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/bcma/driver_chipcommon_sflash.c
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -38,6 +38,11 @@ config BCMA_HOST_SOC
+ bool
+ depends on BCMA_DRIVER_MIPS
+
++config BCMA_SFLASH
++ bool
++ depends on BCMA_DRIVER_MIPS
++ default y
++
+ config BCMA_DRIVER_MIPS
+ bool "BCMA Broadcom MIPS core driver"
+ depends on BCMA && MIPS
+--- a/drivers/bcma/Makefile
++++ b/drivers/bcma/Makefile
+@@ -1,5 +1,6 @@
+ bcma-y += main.o scan.o core.o sprom.o
+ bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
++bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o
+ bcma-y += driver_pci.o
+ bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
+ bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -41,6 +41,11 @@ void bcma_chipco_serial_init(struct bcma
+ u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
+ u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
+
++#ifdef CONFIG_BCMA_SFLASH
++/* driver_chipcommon_sflash.c */
++int bcma_sflash_init(struct bcma_drv_cc *cc);
++#endif /* CONFIG_BCMA_SFLASH */
++
+ #ifdef CONFIG_BCMA_HOST_PCI
+ /* host_pci.c */
+ extern int __init bcma_host_pci_init(void);
+--- /dev/null
++++ b/drivers/bcma/driver_chipcommon_sflash.c
+@@ -0,0 +1,555 @@
++/*
++ * Broadcom SiliconBackplane chipcommon serial flash interface
++ *
++ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
++ * Copyright 2010, Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_driver_chipcommon.h>
++#include <linux/delay.h>
++
++#include "bcma_private.h"
++
++#define NUM_RETRIES 3
++
++
++/* Issue a serial flash command */
++static inline void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
++{
++ bcma_cc_write32(cc, BCMA_CC_FLASHCTL,
++ BCMA_CC_FLASHCTL_START | opcode);
++ while (bcma_cc_read32(cc, BCMA_CC_FLASHCTL) & BCMA_CC_FLASHCTL_BUSY)
++ ;
++}
++
++
++static inline void bcma_sflash_write_u8(struct bcma_drv_cc *cc,
++ u32 offset, u8 byte)
++{
++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
++ bcma_cc_write32(cc, BCMA_CC_FLASHDATA, byte);
++}
++
++/* Initialize serial flash access */
++int bcma_sflash_init(struct bcma_drv_cc *cc)
++{
++ u32 id, id2;
++
++ memset(&cc->sflash, 0, sizeof(struct bcma_sflash));
++
++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++ case BCMA_CC_FLASHT_STSER:
++ /* Probe for ST chips */
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP);
++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0);
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
++ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
++ cc->sflash.blocksize = 64 * 1024;
++ switch (id) {
++ case 0x11:
++ /* ST M25P20 2 Mbit Serial Flash */
++ cc->sflash.numblocks = 4;
++ break;
++ case 0x12:
++ /* ST M25P40 4 Mbit Serial Flash */
++ cc->sflash.numblocks = 8;
++ break;
++ case 0x13:
++ /* ST M25P80 8 Mbit Serial Flash */
++ cc->sflash.numblocks = 16;
++ break;
++ case 0x14:
++ /* ST M25P16 16 Mbit Serial Flash */
++ cc->sflash.numblocks = 32;
++ break;
++ case 0x15:
++ /* ST M25P32 32 Mbit Serial Flash */
++ cc->sflash.numblocks = 64;
++ break;
++ case 0x16:
++ /* ST M25P64 64 Mbit Serial Flash */
++ cc->sflash.numblocks = 128;
++ break;
++ case 0x17:
++ /* ST M25FL128 128 Mbit Serial Flash */
++ cc->sflash.numblocks = 256;
++ break;
++ case 0xbf:
++ /* All of the following flashes are SST with
++ * 4KB subsectors. Others should be added but
++ * We'll have to revamp the way we identify them
++ * since RES is not eough to disambiguate them.
++ */
++ cc->sflash.blocksize = 4 * 1024;
++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1);
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
++ id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
++ switch (id2) {
++ case 1:
++ /* SST25WF512 512 Kbit Serial Flash */
++ case 0x48:
++ /* SST25VF512 512 Kbit Serial Flash */
++ cc->sflash.numblocks = 16;
++ break;
++ case 2:
++ /* SST25WF010 1 Mbit Serial Flash */
++ case 0x49:
++ /* SST25VF010 1 Mbit Serial Flash */
++ cc->sflash.numblocks = 32;
++ break;
++ case 3:
++ /* SST25WF020 2 Mbit Serial Flash */
++ case 0x43:
++ /* SST25VF020 2 Mbit Serial Flash */
++ cc->sflash.numblocks = 64;
++ break;
++ case 4:
++ /* SST25WF040 4 Mbit Serial Flash */
++ case 0x44:
++ /* SST25VF040 4 Mbit Serial Flash */
++ case 0x8d:
++ /* SST25VF040B 4 Mbit Serial Flash */
++ cc->sflash.numblocks = 128;
++ break;
++ case 5:
++ /* SST25WF080 8 Mbit Serial Flash */
++ case 0x8e:
++ /* SST25VF080B 8 Mbit Serial Flash */
++ cc->sflash.numblocks = 256;
++ break;
++ case 0x41:
++ /* SST25VF016 16 Mbit Serial Flash */
++ cc->sflash.numblocks = 512;
++ break;
++ case 0x4a:
++ /* SST25VF032 32 Mbit Serial Flash */
++ cc->sflash.numblocks = 1024;
++ break;
++ case 0x4b:
++ /* SST25VF064 64 Mbit Serial Flash */
++ cc->sflash.numblocks = 2048;
++ break;
++ }
++ break;
++ }
++ break;
++
++ case BCMA_CC_FLASHT_ATSER:
++ /* Probe for Atmel chips */
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
++ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c;
++ switch (id) {
++ case 0xc:
++ /* Atmel AT45DB011 1Mbit Serial Flash */
++ cc->sflash.blocksize = 256;
++ cc->sflash.numblocks = 512;
++ break;
++ case 0x14:
++ /* Atmel AT45DB021 2Mbit Serial Flash */
++ cc->sflash.blocksize = 256;
++ cc->sflash.numblocks = 1024;
++ break;
++ case 0x1c:
++ /* Atmel AT45DB041 4Mbit Serial Flash */
++ cc->sflash.blocksize = 256;
++ cc->sflash.numblocks = 2048;
++ break;
++ case 0x24:
++ /* Atmel AT45DB081 8Mbit Serial Flash */
++ cc->sflash.blocksize = 256;
++ cc->sflash.numblocks = 4096;
++ break;
++ case 0x2c:
++ /* Atmel AT45DB161 16Mbit Serial Flash */
++ cc->sflash.blocksize = 512;
++ cc->sflash.numblocks = 4096;
++ break;
++ case 0x34:
++ /* Atmel AT45DB321 32Mbit Serial Flash */
++ cc->sflash.blocksize = 512;
++ cc->sflash.numblocks = 8192;
++ break;
++ case 0x3c:
++ /* Atmel AT45DB642 64Mbit Serial Flash */
++ cc->sflash.blocksize = 1024;
++ cc->sflash.numblocks = 8192;
++ break;
++ }
++ break;
++ }
++
++ cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks;
++
++ return cc->sflash.size ? 0 : -ENODEV;
++}
++
++/* Read len bytes starting at offset into buf. Returns number of bytes read. */
++int bcma_sflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len,
++ u8 *buf)
++{
++ u8 *from, *to;
++ u32 cnt, i;
++
++ if (!len)
++ return 0;
++
++ if ((offset + len) > cc->sflash.size)
++ return -EINVAL;
++
++ if ((len >= 4) && (offset & 3))
++ cnt = 4 - (offset & 3);
++ else if ((len >= 4) && ((u32)buf & 3))
++ cnt = 4 - ((u32)buf & 3);
++ else
++ cnt = len;
++
++
++ if (cc->core->id.rev == 12)
++ from = (u8 *)KSEG1ADDR(BCMA_FLASH2 + offset);
++ else
++ from = (u8 *)KSEG0ADDR(BCMA_FLASH2 + offset);
++
++ to = (u8 *)buf;
++
++ if (cnt < 4) {
++ for (i = 0; i < cnt; i++) {
++ *to = readb(from);
++ from++;
++ to++;
++ }
++ return cnt;
++ }
++
++ while (cnt >= 4) {
++ *(u32 *)to = readl(from);
++ from += 4;
++ to += 4;
++ cnt -= 4;
++ }
++
++ return len - cnt;
++}
++
++/* Poll for command completion. Returns zero when complete. */
++int bcma_sflash_poll(struct bcma_drv_cc *cc, u32 offset)
++{
++ if (offset >= cc->sflash.size)
++ return -22;
++
++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++ case BCMA_CC_FLASHT_STSER:
++ /* Check for ST Write In Progress bit */
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RDSR);
++ return bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
++ & BCMA_CC_FLASHDATA_ST_WIP;
++ case BCMA_CC_FLASHT_ATSER:
++ /* Check for Atmel Ready bit */
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
++ return !(bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
++ & BCMA_CC_FLASHDATA_AT_READY);
++ }
++
++ return 0;
++}
++
++
++static int sflash_st_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
++ const u8 *buf)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ int ret = 0;
++ bool is4712b0 = (bus->chipinfo.id == 0x4712) && (bus->chipinfo.rev == 3);
++ u32 mask;
++
++
++ /* Enable writes */
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
++ if (is4712b0) {
++ mask = 1 << 14;
++ bcma_sflash_write_u8(cc, offset, *buf++);
++ /* Set chip select */
++ bcma_cc_set32(cc, BCMA_CC_GPIOOUT, mask);
++ /* Issue a page program with the first byte */
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_PP);
++ ret = 1;
++ offset++;
++ len--;
++ while (len > 0) {
++ if ((offset & 255) == 0) {
++ /* Page boundary, drop cs and return */
++ bcma_cc_mask32(cc, BCMA_CC_GPIOOUT, ~mask);
++ udelay(1);
++ if (!bcma_sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -EAGAIN;
++ }
++ return ret;
++ } else {
++ /* Write single byte */
++ bcma_sflash_cmd(cc, *buf++);
++ }
++ ret++;
++ offset++;
++ len--;
++ }
++ /* All done, drop cs */
++ bcma_cc_mask32(cc, BCMA_CC_GPIOOUT, ~mask);
++ udelay(1);
++ if (!bcma_sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -EAGAIN;
++ }
++ } else if (cc->core->id.rev >= 20) {
++ bcma_sflash_write_u8(cc, offset, *buf++);
++ /* Issue a page program with CSA bit set */
++ bcma_sflash_cmd(cc,
++ BCMA_CC_FLASHCTL_ST_CSA |
++ BCMA_CC_FLASHCTL_ST_PP);
++ ret = 1;
++ offset++;
++ len--;
++ while (len > 0) {
++ if ((offset & 255) == 0) {
++ /* Page boundary, poll droping cs and return */
++ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
++ udelay(1);
++ if (!bcma_sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -EAGAIN;
++ }
++ return ret;
++ } else {
++ /* Write single byte */
++ bcma_sflash_cmd(cc,
++ BCMA_CC_FLASHCTL_ST_CSA |
++ *buf++);
++ }
++ ret++;
++ offset++;
++ len--;
++ }
++ /* All done, drop cs & poll */
++ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
++ udelay(1);
++ if (!bcma_sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -EAGAIN;
++ }
++ } else {
++ ret = 1;
++ bcma_sflash_write_u8(cc, offset, *buf);
++ /* Page program */
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_PP);
++ }
++ return ret;
++}
++
++static int sflash_at_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
++ const u8 *buf)
++{
++ struct bcma_sflash *sfl = &cc->sflash;
++ u32 page, byte, mask;
++ int ret = 0;
++ mask = sfl->blocksize - 1;
++ page = (offset & ~mask) << 1;
++ byte = offset & mask;
++ /* Read main memory page into buffer 1 */
++ if (byte || (len < sfl->blocksize)) {
++ int i = 100;
++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_LOAD);
++ /* 250 us for AT45DB321B */
++ while (i > 0 && bcma_sflash_poll(cc, offset)) {
++ udelay(10);
++ i--;
++ }
++ BUG_ON(!bcma_sflash_poll(cc, offset));
++ }
++ /* Write into buffer 1 */
++ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
++ bcma_sflash_write_u8(cc, byte++, *buf++);
++ bcma_sflash_cmd(cc,
++ BCMA_CC_FLASHCTL_AT_BUF1_WRITE);
++ }
++ /* Write buffer 1 into main memory page */
++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM);
++
++ return ret;
++}
++
++/* Write len bytes starting at offset into buf. Returns number of bytes
++ * written. Caller should poll for completion.
++ */
++int bcma_sflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
++ const u8 *buf)
++{
++ struct bcma_sflash *sfl;
++ int ret = 0, tries = NUM_RETRIES;
++
++ if (!len)
++ return 0;
++
++ if ((offset + len) > cc->sflash.size)
++ return -EINVAL;
++
++ sfl = &cc->sflash;
++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++ case BCMA_CC_FLASHT_STSER:
++ do {
++ ret = sflash_st_write(cc, offset, len, buf);
++ tries--;
++ } while (ret == -EAGAIN && tries > 0);
++
++ if (ret == -EAGAIN && tries == 0) {
++ pr_info("ST Flash rejected write\n");
++ ret = -EIO;
++ }
++ break;
++ case BCMA_CC_FLASHT_ATSER:
++ ret = sflash_at_write(cc, offset, len, buf);
++ break;
++ }
++
++ return ret;
++}
++
++/* Erase a region. Returns number of bytes scheduled for erasure.
++ * Caller should poll for completion.
++ */
++int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset)
++{
++ struct bcma_sflash *sfl;
++
++ if (offset >= cc->sflash.size)
++ return -EINVAL;
++
++ sfl = &cc->sflash;
++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++ case BCMA_CC_FLASHT_STSER:
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
++ /* Newer flashes have "sub-sectors" which can be erased independently
++ * with a new command: ST_SSE. The ST_SE command erases 64KB just as
++ * before.
++ */
++ bcma_sflash_cmd(cc, (sfl->blocksize < (64 * 1024)) ? BCMA_CC_FLASHCTL_ST_SSE : BCMA_CC_FLASHCTL_ST_SE);
++ return sfl->blocksize;
++ case BCMA_CC_FLASHT_ATSER:
++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset << 1);
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_PAGE_ERASE);
++ return sfl->blocksize;
++ }
++
++ return 0;
++}
++
++/*
++ * writes the appropriate range of flash, a NULL buf simply erases
++ * the region of flash
++ */
++int bcma_sflash_commit(struct bcma_drv_cc *cc, u32 offset, u32 len,
++ const u8 *buf)
++{
++ struct bcma_sflash *sfl;
++ u8 *block = NULL, *cur_ptr, *blk_ptr;
++ u32 blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
++ u32 blk_offset, blk_len, copied;
++ int bytes, ret = 0;
++
++ /* Check address range */
++ if (len <= 0)
++ return 0;
++
++ sfl = &cc->sflash;
++ if ((offset + len) > sfl->size)
++ return -EINVAL;
++
++ blocksize = sfl->blocksize;
++ mask = blocksize - 1;
++
++ /* Allocate a block of mem */
++ block = kmalloc(blocksize, GFP_KERNEL);
++ if (!block)
++ return -ENOMEM;
++
++ while (len) {
++ /* Align offset */
++ cur_offset = offset & ~mask;
++ cur_length = blocksize;
++ cur_ptr = block;
++
++ remainder = blocksize - (offset & mask);
++ if (len < remainder)
++ cur_retlen = len;
++ else
++ cur_retlen = remainder;
++
++ /* buf == NULL means erase only */
++ if (buf) {
++ /* Copy existing data into holding block if necessary */
++ if ((offset & mask) || (len < blocksize)) {
++ blk_offset = cur_offset;
++ blk_len = cur_length;
++ blk_ptr = cur_ptr;
++
++ /* Copy entire block */
++ while (blk_len) {
++ copied = bcma_sflash_read(cc,
++ blk_offset,
++ blk_len, blk_ptr);
++ blk_offset += copied;
++ blk_len -= copied;
++ blk_ptr += copied;
++ }
++ }
++
++ /* Copy input data into holding block */
++ memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
++ }
++
++ /* Erase block */
++ ret = bcma_sflash_erase(cc, cur_offset);
++ if (ret < 0)
++ goto done;
++
++ while (bcma_sflash_poll(cc, cur_offset));
++
++ /* buf == NULL means erase only */
++ if (!buf) {
++ offset += cur_retlen;
++ len -= cur_retlen;
++ continue;
++ }
++
++ /* Write holding block */
++ while (cur_length > 0) {
++ bytes = bcma_sflash_write(cc, cur_offset,
++ cur_length, cur_ptr);
++
++ if (bytes < 0) {
++ ret = bytes;
++ goto done;
++ }
++
++ while (bcma_sflash_poll(cc, cur_offset))
++ ;
++
++ cur_offset += bytes;
++ cur_length -= bytes;
++ cur_ptr += bytes;
++ }
++
++ offset += cur_retlen;
++ len -= cur_retlen;
++ buf += cur_retlen;
++ }
++
++ ret = len;
++done:
++ kfree(block);
++ return ret;
++}
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -185,7 +185,13 @@ static void bcma_core_mips_flash_detect(
+ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
+ case BCMA_CC_FLASHT_STSER:
+ case BCMA_CC_FLASHT_ATSER:
+- pr_err("Serial flash not supported.\n");
++#ifdef CONFIG_BCMA_SFLASH
++ pr_info("found serial flash.\n");
++ bus->drv_cc.flash_type = BCMA_SFLASH;
++ bcma_sflash_init(&bus->drv_cc);
++#else
++ pr_info("serial flash not supported.\n");
++#endif /* CONFIG_BCMA_SFLASH */
+ break;
+ case BCMA_CC_FLASHT_PARA:
+ pr_info("found parallel flash.\n");
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -375,6 +375,7 @@ struct bcma_chipcommon_pmu {
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ enum bcma_flash_type {
+ BCMA_PFLASH,
++ BCMA_SFLASH,
+ };
+
+ struct bcma_pflash {
+@@ -383,6 +384,14 @@ struct bcma_pflash {
+ u32 window_size;
+ };
+
++#ifdef CONFIG_BCMA_SFLASH
++struct bcma_sflash {
++ u32 blocksize; /* Block size */
++ u32 numblocks; /* Number of blocks */
++ u32 size; /* Total size in bytes */
++};
++#endif /* CONFIG_BCMA_SFLASH */
++
+ struct bcma_serial_port {
+ void *regs;
+ unsigned long clockspeed;
+@@ -405,6 +414,9 @@ struct bcma_drv_cc {
+ enum bcma_flash_type flash_type;
+ union {
+ struct bcma_pflash pflash;
++#ifdef CONFIG_BCMA_SFLASH
++ struct bcma_sflash sflash;
++#endif /* CONFIG_BCMA_SFLASH */
+ };
+
+ int nr_serial_ports;
+@@ -459,4 +471,16 @@ extern void bcma_chipco_chipctl_maskset(
+ extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
+ u32 offset, u32 mask, u32 set);
+
++#ifdef CONFIG_BCMA_SFLASH
++/* Chipcommon sflash support. */
++int bcma_sflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len,
++ u8 *buf);
++int bcma_sflash_poll(struct bcma_drv_cc *cc, u32 offset);
++int bcma_sflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
++ const u8 *buf);
++int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset);
++int bcma_sflash_commit(struct bcma_drv_cc *cc, u32 offset, u32 len,
++ const u8 *buf);
++#endif /* CONFIG_BCMA_SFLASH */
++
+ #endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/target/linux/brcm47xx/patches-3.2/0014-ssb-move-flash-to-chipcommon.patch b/target/linux/brcm47xx/patches-3.2/0014-ssb-move-flash-to-chipcommon.patch
new file mode 100644
index 0000000000..91d8acb267
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0014-ssb-move-flash-to-chipcommon.patch
@@ -0,0 +1,149 @@
+From e8afde87ecf56beff67c7d5371cabaa4fc018541 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 23 Jul 2011 23:57:06 +0200
+Subject: [PATCH 14/26] ssb: move flash to chipcommon
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/nvram.c | 8 +++---
+ arch/mips/bcm47xx/wgt634u.c | 8 +++---
+ drivers/ssb/driver_mipscore.c | 36 +++++++++++++++++++++-------
+ include/linux/ssb/ssb_driver_chipcommon.h | 18 ++++++++++++++
+ include/linux/ssb/ssb_driver_mips.h | 4 ---
+ 5 files changed, 53 insertions(+), 21 deletions(-)
+
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -27,7 +27,7 @@ static char nvram_buf[NVRAM_SPACE];
+ static void early_nvram_init(void)
+ {
+ #ifdef CONFIG_BCM47XX_SSB
+- struct ssb_mipscore *mcore_ssb;
++ struct ssb_chipcommon *ssb_cc;
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+ struct bcma_drv_cc *bcma_cc;
+@@ -42,9 +42,9 @@ static void early_nvram_init(void)
+ switch (bcm47xx_bus_type) {
+ #ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+- mcore_ssb = &bcm47xx_bus.ssb.mipscore;
+- base = mcore_ssb->flash_window;
+- lim = mcore_ssb->flash_window_size;
++ ssb_cc = &bcm47xx_bus.ssb.chipco;
++ base = ssb_cc->pflash.window;
++ lim = ssb_cc->pflash.window_size;
+ break;
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+--- a/arch/mips/bcm47xx/wgt634u.c
++++ b/arch/mips/bcm47xx/wgt634u.c
+@@ -156,10 +156,10 @@ static int __init wgt634u_init(void)
+ SSB_CHIPCO_IRQ_GPIO);
+ }
+
+- wgt634u_flash_data.width = mcore->flash_buswidth;
+- wgt634u_flash_resource.start = mcore->flash_window;
+- wgt634u_flash_resource.end = mcore->flash_window
+- + mcore->flash_window_size
++ wgt634u_flash_data.width = mcore->pflash.buswidth;
++ wgt634u_flash_resource.start = mcore->pflash.window;
++ wgt634u_flash_resource.end = mcore->pflash.window
++ + mcore->pflash.window_size
+ - 1;
+ return platform_add_devices(wgt634u_devices,
+ ARRAY_SIZE(wgt634u_devices));
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -190,16 +190,34 @@ static void ssb_mips_flash_detect(struct
+ {
+ struct ssb_bus *bus = mcore->dev->bus;
+
+- mcore->flash_buswidth = 2;
+- if (bus->chipco.dev) {
+- mcore->flash_window = 0x1c000000;
+- mcore->flash_window_size = 0x02000000;
++ /* When there is no chipcommon on the bus there is 4MB flash */
++ if (!bus->chipco.dev) {
++ pr_info("found parallel flash.\n");
++ bus->chipco.flash_type = SSB_PFLASH;
++ bus->chipco.pflash.window = SSB_FLASH1;
++ bus->chipco.pflash.window_size = SSB_FLASH1_SZ;
++ bus->chipco.pflash.buswidth = 2;
++ return;
++ }
++
++ switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ case SSB_CHIPCO_FLASHT_ATSER:
++ pr_info("serial flash not supported.\n");
++ break;
++ case SSB_CHIPCO_FLASHT_PARA:
++ pr_info("found parallel flash.\n");
++ bus->chipco.flash_type = SSB_PFLASH;
++ bus->chipco.pflash.window = SSB_FLASH2;
++ bus->chipco.pflash.window_size = SSB_FLASH2_SZ;
+ if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
+- & SSB_CHIPCO_CFG_DS16) == 0)
+- mcore->flash_buswidth = 1;
+- } else {
+- mcore->flash_window = 0x1fc00000;
+- mcore->flash_window_size = 0x00400000;
++ & SSB_CHIPCO_CFG_DS16) == 0)
++ bus->chipco.pflash.buswidth = 1;
++ else
++ bus->chipco.pflash.buswidth = 2;
++ break;
++ default:
++ pr_err("flash not supported.\n");
+ }
+ }
+
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -582,6 +582,18 @@ struct ssb_chipcommon_pmu {
+ u32 crystalfreq; /* The active crystal frequency (in kHz) */
+ };
+
++#ifdef CONFIG_SSB_DRIVER_MIPS
++enum ssb_flash_type {
++ SSB_PFLASH,
++};
++
++struct ssb_pflash {
++ u8 buswidth;
++ u32 window;
++ u32 window_size;
++};
++#endif /* CONFIG_SSB_DRIVER_MIPS */
++
+ struct ssb_chipcommon {
+ struct ssb_device *dev;
+ u32 capabilities;
+@@ -589,6 +601,12 @@ struct ssb_chipcommon {
+ /* Fast Powerup Delay constant */
+ u16 fast_pwrup_delay;
+ struct ssb_chipcommon_pmu pmu;
++#ifdef CONFIG_SSB_DRIVER_MIPS
++ enum ssb_flash_type flash_type;
++ union {
++ struct ssb_pflash pflash;
++ };
++#endif /* CONFIG_SSB_DRIVER_MIPS */
+ };
+
+ static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
+--- a/include/linux/ssb/ssb_driver_mips.h
++++ b/include/linux/ssb/ssb_driver_mips.h
+@@ -19,10 +19,6 @@ struct ssb_mipscore {
+
+ int nr_serial_ports;
+ struct ssb_serial_port serial_ports[4];
+-
+- u8 flash_buswidth;
+- u32 flash_window;
+- u32 flash_window_size;
+ };
+
+ extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
diff --git a/target/linux/brcm47xx/patches-3.2/0015-ssb-add-serial-flash-support.patch b/target/linux/brcm47xx/patches-3.2/0015-ssb-add-serial-flash-support.patch
new file mode 100644
index 0000000000..e91c2a44f4
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0015-ssb-add-serial-flash-support.patch
@@ -0,0 +1,697 @@
+From 980da78179592a3f5f99168bc5af415835aa8c13 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 24 Jul 2011 20:20:36 +0200
+Subject: [PATCH 15/26] ssb: add serial flash support
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/ssb/Kconfig | 6 +
+ drivers/ssb/Makefile | 1 +
+ drivers/ssb/driver_chipcommon_sflash.c | 556 +++++++++++++++++++++++++++++
+ drivers/ssb/driver_mipscore.c | 6 +
+ drivers/ssb/ssb_private.h | 4 +
+ include/linux/ssb/ssb_driver_chipcommon.h | 30 ++-
+ 6 files changed, 601 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/ssb/driver_chipcommon_sflash.c
+
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -137,6 +137,12 @@ config SSB_DRIVER_MIPS
+
+ If unsure, say N
+
++config SSB_SFLASH
++ bool
++ depends on SSB_DRIVER_MIPS
++ default y
++
++
+ # Assumption: We are on embedded, if we compile the MIPS core.
+ config SSB_EMBEDDED
+ bool
+--- a/drivers/ssb/Makefile
++++ b/drivers/ssb/Makefile
+@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
+ # built-in drivers
+ ssb-y += driver_chipcommon.o
+ ssb-y += driver_chipcommon_pmu.o
++ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o
+ ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
+ ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
+ ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
+--- /dev/null
++++ b/drivers/ssb/driver_chipcommon_sflash.c
+@@ -0,0 +1,556 @@
++/*
++ * Broadcom SiliconBackplane chipcommon serial flash interface
++ *
++ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
++ * Copyright 2010, Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/ssb/ssb.h>
++#include <linux/ssb/ssb_driver_chipcommon.h>
++#include <linux/delay.h>
++
++#include "ssb_private.h"
++
++#define NUM_RETRIES 3
++
++
++/* Issue a serial flash command */
++static inline void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
++{
++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
++ SSB_CHIPCO_FLASHCTL_START | opcode);
++ while (chipco_read32(cc, SSB_CHIPCO_FLASHCTL)
++ & SSB_CHIPCO_FLASHCTL_BUSY)
++ ;
++}
++
++
++static inline void ssb_sflash_write_u8(struct ssb_chipcommon *cc,
++ u32 offset, u8 byte)
++{
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
++ chipco_write32(cc, SSB_CHIPCO_FLASHDATA, byte);
++}
++
++/* Initialize serial flash access */
++int ssb_sflash_init(struct ssb_chipcommon *cc)
++{
++ u32 id, id2;
++
++ memset(&cc->sflash, 0, sizeof(struct ssb_sflash));
++
++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ /* Probe for ST chips */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
++ cc->sflash.blocksize = 64 * 1024;
++ switch (id) {
++ case 0x11:
++ /* ST M25P20 2 Mbit Serial Flash */
++ cc->sflash.numblocks = 4;
++ break;
++ case 0x12:
++ /* ST M25P40 4 Mbit Serial Flash */
++ cc->sflash.numblocks = 8;
++ break;
++ case 0x13:
++ /* ST M25P80 8 Mbit Serial Flash */
++ cc->sflash.numblocks = 16;
++ break;
++ case 0x14:
++ /* ST M25P16 16 Mbit Serial Flash */
++ cc->sflash.numblocks = 32;
++ break;
++ case 0x15:
++ /* ST M25P32 32 Mbit Serial Flash */
++ cc->sflash.numblocks = 64;
++ break;
++ case 0x16:
++ /* ST M25P64 64 Mbit Serial Flash */
++ cc->sflash.numblocks = 128;
++ break;
++ case 0x17:
++ /* ST M25FL128 128 Mbit Serial Flash */
++ cc->sflash.numblocks = 256;
++ break;
++ case 0xbf:
++ /* All of the following flashes are SST with
++ * 4KB subsectors. Others should be added but
++ * We'll have to revamp the way we identify them
++ * since RES is not eough to disambiguate them.
++ */
++ cc->sflash.blocksize = 4 * 1024;
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
++ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
++ switch (id2) {
++ case 1:
++ /* SST25WF512 512 Kbit Serial Flash */
++ case 0x48:
++ /* SST25VF512 512 Kbit Serial Flash */
++ cc->sflash.numblocks = 16;
++ break;
++ case 2:
++ /* SST25WF010 1 Mbit Serial Flash */
++ case 0x49:
++ /* SST25VF010 1 Mbit Serial Flash */
++ cc->sflash.numblocks = 32;
++ break;
++ case 3:
++ /* SST25WF020 2 Mbit Serial Flash */
++ case 0x43:
++ /* SST25VF020 2 Mbit Serial Flash */
++ cc->sflash.numblocks = 64;
++ break;
++ case 4:
++ /* SST25WF040 4 Mbit Serial Flash */
++ case 0x44:
++ /* SST25VF040 4 Mbit Serial Flash */
++ case 0x8d:
++ /* SST25VF040B 4 Mbit Serial Flash */
++ cc->sflash.numblocks = 128;
++ break;
++ case 5:
++ /* SST25WF080 8 Mbit Serial Flash */
++ case 0x8e:
++ /* SST25VF080B 8 Mbit Serial Flash */
++ cc->sflash.numblocks = 256;
++ break;
++ case 0x41:
++ /* SST25VF016 16 Mbit Serial Flash */
++ cc->sflash.numblocks = 512;
++ break;
++ case 0x4a:
++ /* SST25VF032 32 Mbit Serial Flash */
++ cc->sflash.numblocks = 1024;
++ break;
++ case 0x4b:
++ /* SST25VF064 64 Mbit Serial Flash */
++ cc->sflash.numblocks = 2048;
++ break;
++ }
++ break;
++ }
++ break;
++
++ case SSB_CHIPCO_FLASHT_ATSER:
++ /* Probe for Atmel chips */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
++ switch (id) {
++ case 0xc:
++ /* Atmel AT45DB011 1Mbit Serial Flash */
++ cc->sflash.blocksize = 256;
++ cc->sflash.numblocks = 512;
++ break;
++ case 0x14:
++ /* Atmel AT45DB021 2Mbit Serial Flash */
++ cc->sflash.blocksize = 256;
++ cc->sflash.numblocks = 1024;
++ break;
++ case 0x1c:
++ /* Atmel AT45DB041 4Mbit Serial Flash */
++ cc->sflash.blocksize = 256;
++ cc->sflash.numblocks = 2048;
++ break;
++ case 0x24:
++ /* Atmel AT45DB081 8Mbit Serial Flash */
++ cc->sflash.blocksize = 256;
++ cc->sflash.numblocks = 4096;
++ break;
++ case 0x2c:
++ /* Atmel AT45DB161 16Mbit Serial Flash */
++ cc->sflash.blocksize = 512;
++ cc->sflash.numblocks = 4096;
++ break;
++ case 0x34:
++ /* Atmel AT45DB321 32Mbit Serial Flash */
++ cc->sflash.blocksize = 512;
++ cc->sflash.numblocks = 8192;
++ break;
++ case 0x3c:
++ /* Atmel AT45DB642 64Mbit Serial Flash */
++ cc->sflash.blocksize = 1024;
++ cc->sflash.numblocks = 8192;
++ break;
++ }
++ break;
++ }
++
++ cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks;
++
++ return cc->sflash.size ? 0 : -ENODEV;
++}
++
++/* Read len bytes starting at offset into buf. Returns number of bytes read. */
++int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ u8 *buf)
++{
++ u8 *from, *to;
++ u32 cnt, i;
++
++ if (!len)
++ return 0;
++
++ if ((offset + len) > cc->sflash.size)
++ return -EINVAL;
++
++ if ((len >= 4) && (offset & 3))
++ cnt = 4 - (offset & 3);
++ else if ((len >= 4) && ((u32)buf & 3))
++ cnt = 4 - ((u32)buf & 3);
++ else
++ cnt = len;
++
++
++ if (cc->dev->id.revision == 12)
++ from = (u8 *)KSEG1ADDR(SSB_FLASH2 + offset);
++ else
++ from = (u8 *)KSEG0ADDR(SSB_FLASH2 + offset);
++
++ to = (u8 *)buf;
++
++ if (cnt < 4) {
++ for (i = 0; i < cnt; i++) {
++ *to = readb(from);
++ from++;
++ to++;
++ }
++ return cnt;
++ }
++
++ while (cnt >= 4) {
++ *(u32 *)to = readl(from);
++ from += 4;
++ to += 4;
++ cnt -= 4;
++ }
++
++ return len - cnt;
++}
++
++/* Poll for command completion. Returns zero when complete. */
++int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset)
++{
++ if (offset >= cc->sflash.size)
++ return -22;
++
++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ /* Check for ST Write In Progress bit */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RDSR);
++ return chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
++ & SSB_CHIPCO_FLASHSTA_ST_WIP;
++ case SSB_CHIPCO_FLASHT_ATSER:
++ /* Check for Atmel Ready bit */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
++ return !(chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
++ & SSB_CHIPCO_FLASHSTA_AT_READY);
++ }
++
++ return 0;
++}
++
++
++static int sflash_st_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ const u8 *buf)
++{
++ struct ssb_bus *bus = cc->dev->bus;
++ int ret = 0;
++ bool is4712b0 = (bus->chip_id == 0x4712) && (bus->chip_rev == 3);
++ u32 mask;
++
++
++ /* Enable writes */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
++ if (is4712b0) {
++ mask = 1 << 14;
++ ssb_sflash_write_u8(cc, offset, *buf++);
++ /* Set chip select */
++ chipco_set32(cc, SSB_CHIPCO_GPIOOUT, mask);
++ /* Issue a page program with the first byte */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
++ ret = 1;
++ offset++;
++ len--;
++ while (len > 0) {
++ if ((offset & 255) == 0) {
++ /* Page boundary, drop cs and return */
++ chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
++ udelay(1);
++ if (!ssb_sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -EAGAIN;
++ }
++ return ret;
++ } else {
++ /* Write single byte */
++ ssb_sflash_cmd(cc, *buf++);
++ }
++ ret++;
++ offset++;
++ len--;
++ }
++ /* All done, drop cs */
++ chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
++ udelay(1);
++ if (!ssb_sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -EAGAIN;
++ }
++ } else if (cc->dev->id.revision >= 20) {
++ ssb_sflash_write_u8(cc, offset, *buf++);
++ /* Issue a page program with CSA bit set */
++ ssb_sflash_cmd(cc,
++ SSB_CHIPCO_FLASHCTL_ST_CSA |
++ SSB_CHIPCO_FLASHCTL_ST_PP);
++ ret = 1;
++ offset++;
++ len--;
++ while (len > 0) {
++ if ((offset & 255) == 0) {
++ /* Page boundary, poll droping cs and return */
++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
++ udelay(1);
++ if (!ssb_sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -EAGAIN;
++ }
++ return ret;
++ } else {
++ /* Write single byte */
++ ssb_sflash_cmd(cc,
++ SSB_CHIPCO_FLASHCTL_ST_CSA |
++ *buf++);
++ }
++ ret++;
++ offset++;
++ len--;
++ }
++ /* All done, drop cs & poll */
++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
++ udelay(1);
++ if (!ssb_sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -EAGAIN;
++ }
++ } else {
++ ret = 1;
++ ssb_sflash_write_u8(cc, offset, *buf);
++ /* Page program */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
++ }
++ return ret;
++}
++
++static int sflash_at_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ const u8 *buf)
++{
++ struct ssb_sflash *sfl = &cc->sflash;
++ u32 page, byte, mask;
++ int ret = 0;
++ mask = sfl->blocksize - 1;
++ page = (offset & ~mask) << 1;
++ byte = offset & mask;
++ /* Read main memory page into buffer 1 */
++ if (byte || (len < sfl->blocksize)) {
++ int i = 100;
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD);
++ /* 250 us for AT45DB321B */
++ while (i > 0 && ssb_sflash_poll(cc, offset)) {
++ udelay(10);
++ i--;
++ }
++ BUG_ON(!ssb_sflash_poll(cc, offset));
++ }
++ /* Write into buffer 1 */
++ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
++ ssb_sflash_write_u8(cc, byte++, *buf++);
++ ssb_sflash_cmd(cc,
++ SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE);
++ }
++ /* Write buffer 1 into main memory page */
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM);
++
++ return ret;
++}
++
++/* Write len bytes starting at offset into buf. Returns number of bytes
++ * written. Caller should poll for completion.
++ */
++int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ const u8 *buf)
++{
++ struct ssb_sflash *sfl;
++ int ret = 0, tries = NUM_RETRIES;
++
++ if (!len)
++ return 0;
++
++ if ((offset + len) > cc->sflash.size)
++ return -EINVAL;
++
++ sfl = &cc->sflash;
++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ do {
++ ret = sflash_st_write(cc, offset, len, buf);
++ tries--;
++ } while (ret == -EAGAIN && tries > 0);
++
++ if (ret == -EAGAIN && tries == 0) {
++ pr_info("ST Flash rejected write\n");
++ ret = -EIO;
++ }
++ break;
++ case SSB_CHIPCO_FLASHT_ATSER:
++ ret = sflash_at_write(cc, offset, len, buf);
++ break;
++ }
++
++ return ret;
++}
++
++/* Erase a region. Returns number of bytes scheduled for erasure.
++ * Caller should poll for completion.
++ */
++int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset)
++{
++ struct ssb_sflash *sfl;
++
++ if (offset >= cc->sflash.size)
++ return -EINVAL;
++
++ sfl = &cc->sflash;
++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
++ /* Newer flashes have "sub-sectors" which can be erased independently
++ * with a new command: ST_SSE. The ST_SE command erases 64KB just as
++ * before.
++ */
++ ssb_sflash_cmd(cc, (sfl->blocksize < (64 * 1024)) ? SSB_CHIPCO_FLASHCTL_ST_SSE : SSB_CHIPCO_FLASHCTL_ST_SE);
++ return sfl->blocksize;
++ case SSB_CHIPCO_FLASHT_ATSER:
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset << 1);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE);
++ return sfl->blocksize;
++ }
++
++ return 0;
++}
++
++/*
++ * writes the appropriate range of flash, a NULL buf simply erases
++ * the region of flash
++ */
++int ssb_sflash_commit(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ const u8 *buf)
++{
++ struct ssb_sflash *sfl;
++ u8 *block = NULL, *cur_ptr, *blk_ptr;
++ u32 blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
++ u32 blk_offset, blk_len, copied;
++ int bytes, ret = 0;
++
++ /* Check address range */
++ if (len <= 0)
++ return 0;
++
++ sfl = &cc->sflash;
++ if ((offset + len) > sfl->size)
++ return -EINVAL;
++
++ blocksize = sfl->blocksize;
++ mask = blocksize - 1;
++
++ /* Allocate a block of mem */
++ block = kmalloc(blocksize, GFP_KERNEL);
++ if (!block)
++ return -ENOMEM;
++
++ while (len) {
++ /* Align offset */
++ cur_offset = offset & ~mask;
++ cur_length = blocksize;
++ cur_ptr = block;
++
++ remainder = blocksize - (offset & mask);
++ if (len < remainder)
++ cur_retlen = len;
++ else
++ cur_retlen = remainder;
++
++ /* buf == NULL means erase only */
++ if (buf) {
++ /* Copy existing data into holding block if necessary */
++ if ((offset & mask) || (len < blocksize)) {
++ blk_offset = cur_offset;
++ blk_len = cur_length;
++ blk_ptr = cur_ptr;
++
++ /* Copy entire block */
++ while (blk_len) {
++ copied = ssb_sflash_read(cc,
++ blk_offset,
++ blk_len, blk_ptr);
++ blk_offset += copied;
++ blk_len -= copied;
++ blk_ptr += copied;
++ }
++ }
++
++ /* Copy input data into holding block */
++ memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
++ }
++
++ /* Erase block */
++ ret = ssb_sflash_erase(cc, cur_offset);
++ if (ret < 0)
++ goto done;
++
++ while (ssb_sflash_poll(cc, cur_offset));
++
++ /* buf == NULL means erase only */
++ if (!buf) {
++ offset += cur_retlen;
++ len -= cur_retlen;
++ continue;
++ }
++
++ /* Write holding block */
++ while (cur_length > 0) {
++ bytes = ssb_sflash_write(cc, cur_offset,
++ cur_length, cur_ptr);
++
++ if (bytes < 0) {
++ ret = bytes;
++ goto done;
++ }
++
++ while (ssb_sflash_poll(cc, cur_offset))
++ ;
++
++ cur_offset += bytes;
++ cur_length -= bytes;
++ cur_ptr += bytes;
++ }
++
++ offset += cur_retlen;
++ len -= cur_retlen;
++ buf += cur_retlen;
++ }
++
++ ret = len;
++done:
++ kfree(block);
++ return ret;
++}
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -203,7 +203,13 @@ static void ssb_mips_flash_detect(struct
+ switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ case SSB_CHIPCO_FLASHT_ATSER:
++#ifdef CONFIG_SSB_SFLASH
++ pr_info("found serial flash.\n");
++ bus->chipco.flash_type = SSB_SFLASH;
++ ssb_sflash_init(&bus->chipco);
++#else
+ pr_info("serial flash not supported.\n");
++#endif /* CONFIG_SSB_SFLASH */
+ break;
+ case SSB_CHIPCO_FLASHT_PARA:
+ pr_info("found parallel flash.\n");
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -192,6 +192,10 @@ extern int ssb_devices_freeze(struct ssb
+ extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
+
+
++#ifdef CONFIG_SSB_SFLASH
++/* driver_chipcommon_sflash.c */
++int ssb_sflash_init(struct ssb_chipcommon *cc);
++#endif /* CONFIG_SSB_SFLASH */
+
+ /* b43_pci_bridge.c */
+ #ifdef CONFIG_SSB_B43_PCI_BRIDGE
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -503,8 +503,10 @@
+ #define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
+ #define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
+ #define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
+-#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
+-#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */
++#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00D9 /* Deep Power-down */
++#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */
++#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
++#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
+
+ /* Status register bits for ST flashes */
+ #define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */
+@@ -585,6 +587,7 @@ struct ssb_chipcommon_pmu {
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ enum ssb_flash_type {
+ SSB_PFLASH,
++ SSB_SFLASH,
+ };
+
+ struct ssb_pflash {
+@@ -592,6 +595,14 @@ struct ssb_pflash {
+ u32 window;
+ u32 window_size;
+ };
++
++#ifdef CONFIG_SSB_SFLASH
++struct ssb_sflash {
++ u32 blocksize; /* Block size */
++ u32 numblocks; /* Number of blocks */
++ u32 size; /* Total size in bytes */
++};
++#endif /* CONFIG_SSB_SFLASH */
+ #endif /* CONFIG_SSB_DRIVER_MIPS */
+
+ struct ssb_chipcommon {
+@@ -605,6 +616,9 @@ struct ssb_chipcommon {
+ enum ssb_flash_type flash_type;
+ union {
+ struct ssb_pflash pflash;
++#ifdef CONFIG_SSB_SFLASH
++ struct ssb_sflash sflash;
++#endif /* CONFIG_SSB_SFLASH */
+ };
+ #endif /* CONFIG_SSB_DRIVER_MIPS */
+ };
+@@ -666,6 +680,18 @@ extern int ssb_chipco_serial_init(struct
+ struct ssb_serial_port *ports);
+ #endif /* CONFIG_SSB_SERIAL */
+
++#ifdef CONFIG_SSB_SFLASH
++/* Chipcommon sflash support. */
++int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ u8 *buf);
++int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset);
++int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ const u8 *buf);
++int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset);
++int ssb_sflash_commit(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ const u8 *buf);
++#endif /* CONFIG_SSB_SFLASH */
++
+ /* PMU support */
+ extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+
diff --git a/target/linux/brcm47xx/patches-3.2/0016-brcm47xx-add-common-interface-for-sflash.patch b/target/linux/brcm47xx/patches-3.2/0016-brcm47xx-add-common-interface-for-sflash.patch
new file mode 100644
index 0000000000..6caa9180d7
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0016-brcm47xx-add-common-interface-for-sflash.patch
@@ -0,0 +1,193 @@
+From 4f314ac9edbc80897f158fdb4e1b1de8a2d0d432 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 24 Jul 2011 21:10:49 +0200
+Subject: [PATCH 16/26] brcm47xx: add common interface for sflash
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/Makefile | 2 +-
+ arch/mips/bcm47xx/bus.c | 94 ++++++++++++++++++++++++++++++
+ arch/mips/bcm47xx/setup.c | 8 +++
+ arch/mips/include/asm/mach-bcm47xx/bus.h | 37 ++++++++++++
+ 4 files changed, 140 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/bcm47xx/bus.c
+ create mode 100644 arch/mips/include/asm/mach-bcm47xx/bus.h
+
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -3,5 +3,5 @@
+ # under Linux.
+ #
+
+-obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
++obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o
+ obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
+--- /dev/null
++++ b/arch/mips/bcm47xx/bus.c
+@@ -0,0 +1,94 @@
++/*
++ * BCM947xx nvram variable access
++ *
++ * Copyright (C) 2011 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#include <bus.h>
++
++static int bcm47xx_sflash_bcma_read(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf)
++{
++ return bcma_sflash_read(dev->bcc, offset, len, buf);
++}
++
++static int bcm47xx_sflash_bcma_poll(struct bcm47xx_sflash *dev, u32 offset)
++{
++ return bcma_sflash_poll(dev->bcc, offset);
++}
++
++static int bcm47xx_sflash_bcma_write(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf)
++{
++ return bcma_sflash_write(dev->bcc, offset, len, buf);
++}
++
++static int bcm47xx_sflash_bcma_erase(struct bcm47xx_sflash *dev, u32 offset)
++{
++ return bcma_sflash_erase(dev->bcc, offset);
++}
++
++static int bcm47xx_sflash_bcma_commit(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf)
++{
++ return bcma_sflash_commit(dev->bcc, offset, len, buf);
++}
++
++void bcm47xx_sflash_struct_bcma_init(struct bcm47xx_sflash *sflash, struct bcma_drv_cc *bcc)
++{
++ sflash->sflash_type = BCM47XX_BUS_TYPE_BCMA;
++ sflash->bcc = bcc;
++
++ sflash->read = bcm47xx_sflash_bcma_read;
++ sflash->poll = bcm47xx_sflash_bcma_poll;
++ sflash->write = bcm47xx_sflash_bcma_write;
++ sflash->erase = bcm47xx_sflash_bcma_erase;
++ sflash->commit = bcm47xx_sflash_bcma_commit;
++
++ sflash->blocksize = bcc->sflash.blocksize;
++ sflash->numblocks = bcc->sflash.numblocks;
++ sflash->size = bcc->sflash.size;
++}
++
++static int bcm47xx_sflash_ssb_read(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf)
++{
++ return ssb_sflash_read(dev->scc, offset, len, buf);
++}
++
++static int bcm47xx_sflash_ssb_poll(struct bcm47xx_sflash *dev, u32 offset)
++{
++ return ssb_sflash_poll(dev->scc, offset);
++}
++
++static int bcm47xx_sflash_ssb_write(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf)
++{
++ return ssb_sflash_write(dev->scc, offset, len, buf);
++}
++
++static int bcm47xx_sflash_ssb_erase(struct bcm47xx_sflash *dev, u32 offset)
++{
++ return ssb_sflash_erase(dev->scc, offset);
++}
++
++static int bcm47xx_sflash_ssb_commit(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf)
++{
++ return ssb_sflash_commit(dev->scc, offset, len, buf);
++}
++
++void bcm47xx_sflash_struct_ssb_init(struct bcm47xx_sflash *sflash, struct ssb_chipcommon *scc)
++{
++ sflash->sflash_type = BCM47XX_BUS_TYPE_SSB;
++ sflash->scc = scc;
++
++ sflash->read = bcm47xx_sflash_ssb_read;
++ sflash->poll = bcm47xx_sflash_ssb_poll;
++ sflash->write = bcm47xx_sflash_ssb_write;
++ sflash->erase = bcm47xx_sflash_ssb_erase;
++ sflash->commit = bcm47xx_sflash_ssb_commit;
++
++ sflash->blocksize = scc->sflash.blocksize;
++ sflash->numblocks = scc->sflash.numblocks;
++ sflash->size = scc->sflash.size;
++}
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -43,6 +43,8 @@ EXPORT_SYMBOL(bcm47xx_bus);
+ enum bcm47xx_bus_type bcm47xx_bus_type;
+ EXPORT_SYMBOL(bcm47xx_bus_type);
+
++struct bcm47xx_sflash bcm47xx_sflash;
++
+ static void bcm47xx_machine_restart(char *command)
+ {
+ printk(KERN_ALERT "Please stand by while rebooting the system...\n");
+@@ -291,6 +293,9 @@ static void __init bcm47xx_register_ssb(
+ if (err)
+ panic("Failed to initialize SSB bus (err %d)\n", err);
+
++ if (bcm47xx_bus.ssb.chipco.flash_type == SSB_SFLASH)
++ bcm47xx_sflash_struct_ssb_init(&bcm47xx_sflash, &bcm47xx_bus.ssb.chipco);
++
+ mcore = &bcm47xx_bus.ssb.mipscore;
+ if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+ if (strstr(buf, "console=ttyS1")) {
+@@ -315,6 +320,9 @@ static void __init bcm47xx_register_bcma
+ err = bcma_host_soc_register(&bcm47xx_bus.bcma);
+ if (err)
+ panic("Failed to initialize BCMA bus (err %d)\n", err);
++
++ if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_SFLASH)
++ bcm47xx_sflash_struct_bcma_init(&bcm47xx_sflash, &bcm47xx_bus.bcma.bus.drv_cc);
+ }
+ #endif
+
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm47xx/bus.h
+@@ -0,0 +1,37 @@
++/*
++ * BCM947xx nvram variable access
++ *
++ * Copyright (C) 2011 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/ssb/ssb.h>
++#include <linux/bcma/bcma.h>
++#include <bcm47xx.h>
++
++struct bcm47xx_sflash {
++ enum bcm47xx_bus_type sflash_type;
++ union {
++ struct ssb_chipcommon *scc;
++ struct bcma_drv_cc *bcc;
++ };
++
++ int (*read)(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf);
++ int (*poll)(struct bcm47xx_sflash *dev, u32 offset);
++ int (*write)(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf);
++ int (*erase)(struct bcm47xx_sflash *dev, u32 offset);
++ int (*commit)(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf);
++
++ u32 blocksize; /* Block size */
++ u32 numblocks; /* Number of blocks */
++ u32 size; /* Total size in bytes */
++};
++
++void bcm47xx_sflash_struct_bcma_init(struct bcm47xx_sflash *sflash, struct bcma_drv_cc *bcc);
++void bcm47xx_sflash_struct_ssb_init(struct bcm47xx_sflash *sflash, struct ssb_chipcommon *scc);
++
++extern struct bcm47xx_sflash bcm47xx_sflash;
diff --git a/target/linux/brcm47xx/patches-3.2/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch b/target/linux/brcm47xx/patches-3.2/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch
new file mode 100644
index 0000000000..1c41827f9f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch
@@ -0,0 +1,585 @@
+From d50d2d8e3ab5446f791deff0cb78820989ed93e7 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 17 Jul 2011 14:54:11 +0200
+Subject: [PATCH 06/19] mtd: bcm47xx: add bcm47xx part parser
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/mtd/Kconfig | 7 +
+ drivers/mtd/Makefile | 1 +
+ drivers/mtd/bcm47xxpart.c | 542 +++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 550 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/mtd/bcm47xxpart.c
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -164,6 +164,13 @@ config MTD_MYLOADER_PARTS
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically.
+
++config MTD_BCM47XX_PARTS
++ tristate "BCM47XX partitioning support"
++ default y
++ depends on BCM47XX
++ ---help---
++ bcm47XX partitioning support
++
+ comment "User Modules And Translation Layers"
+
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
+ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
+
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR) += mtdchar.o
+--- /dev/null
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -0,0 +1,542 @@
++/*
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
++ *
++ * original functions for finding root filesystem from Mike Baker
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * Flash mapping for BCM947XX boards
++ */
++
++#define pr_fmt(fmt) "bcm47xx_part: " fmt
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/wait.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/crc32.h>
++#include <linux/io.h>
++#include <asm/mach-bcm47xx/nvram.h>
++#include <asm/mach-bcm47xx/bcm47xx.h>
++#include <asm/fw/cfe/cfe_api.h>
++
++
++#define TRX_MAGIC 0x30524448 /* "HDR0" */
++#define TRX_VERSION 1
++#define TRX_MAX_LEN 0x3A0000
++#define TRX_NO_HEADER 1 /* Do not write TRX header */
++#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */
++#define TRX_MAX_OFFSET 3
++
++struct trx_header {
++ u32 magic; /* "HDR0" */
++ u32 len; /* Length of file including header */
++ u32 crc32; /* 32-bit CRC from flag_version to end of file */
++ u32 flag_version; /* 0:15 flags, 16:31 version */
++ u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
++};
++
++/* for Edimax Print servers which use an additional header
++ * then the firmware on flash looks like :
++ * EDIMAX HEADER | TRX HEADER
++ * As this header is 12 bytes long we have to handle it
++ * and skip it to find the TRX header
++ */
++#define EDIMAX_PS_HEADER_MAGIC 0x36315350 /* "PS16" */
++#define EDIMAX_PS_HEADER_LEN 0xc /* 12 bytes long for edimax header */
++
++#define NVRAM_SPACE 0x8000
++
++#define ROUTER_NETGEAR_WGR614L 1
++#define ROUTER_NETGEAR_WNR834B 2
++#define ROUTER_NETGEAR_WNDR3300 3
++#define ROUTER_NETGEAR_WNR3500L 4
++#define ROUTER_SIMPLETECH_SIMPLESHARE 5
++#define ROUTER_NETGEAR_WNDR3400 6
++
++static int
++find_cfe_size(struct mtd_info *mtd)
++{
++ struct trx_header *trx;
++ unsigned char buf[512];
++ int off;
++ size_t len;
++ int blocksize;
++
++ trx = (struct trx_header *) buf;
++
++ blocksize = mtd->erasesize;
++ if (blocksize < 0x10000)
++ blocksize = 0x10000;
++
++ for (off = (128*1024); off < mtd->size; off += blocksize) {
++ memset(buf, 0xe5, sizeof(buf));
++
++ /*
++ * Read into buffer
++ */
++ if (mtd->read(mtd, off, sizeof(buf), &len, buf) ||
++ len != sizeof(buf))
++ continue;
++
++ if (le32_to_cpu(trx->magic) == EDIMAX_PS_HEADER_MAGIC) {
++ if (mtd->read(mtd, off + EDIMAX_PS_HEADER_LEN,
++ sizeof(buf), &len, buf) || len != sizeof(buf)) {
++ continue;
++ } else {
++ pr_notice("Found edimax header\n");
++ }
++ }
++
++ /* found a TRX header */
++ if (le32_to_cpu(trx->magic) == TRX_MAGIC)
++ goto found;
++ }
++
++ pr_notice("%s: Couldn't find bootloader size\n", mtd->name);
++ return -1;
++
++ found:
++ pr_notice("bootloader size: %d\n", off);
++ return off;
++
++}
++
++/*
++ * Copied from mtdblock.c
++ *
++ * Cache stuff...
++ *
++ * Since typical flash erasable sectors are much larger than what Linux's
++ * buffer cache can handle, we must implement read-modify-write on flash
++ * sectors for each block write requests. To avoid over-erasing flash sectors
++ * and to speed things up, we locally cache a whole flash sector while it is
++ * being written to until a different sector is required.
++ */
++
++static void erase_callback(struct erase_info *done)
++{
++ wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
++ wake_up(wait_q);
++}
++
++static int erase_write(struct mtd_info *mtd, unsigned long pos,
++ int len, const char *buf)
++{
++ struct erase_info erase;
++ DECLARE_WAITQUEUE(wait, current);
++ wait_queue_head_t wait_q;
++ size_t retlen;
++ int ret;
++
++ /*
++ * First, let's erase the flash block.
++ */
++
++ init_waitqueue_head(&wait_q);
++ erase.mtd = mtd;
++ erase.callback = erase_callback;
++ erase.addr = pos;
++ erase.len = len;
++ erase.priv = (u_long)&wait_q;
++
++ set_current_state(TASK_INTERRUPTIBLE);
++ add_wait_queue(&wait_q, &wait);
++
++ ret = mtd->erase(mtd, &erase);
++ if (ret) {
++ set_current_state(TASK_RUNNING);
++ remove_wait_queue(&wait_q, &wait);
++ pr_warn("erase of region [0x%lx, 0x%x] on \"%s\" failed\n",
++ pos, len, mtd->name);
++ return ret;
++ }
++
++ schedule(); /* Wait for erase to finish. */
++ remove_wait_queue(&wait_q, &wait);
++
++ /*
++ * Next, write data to flash.
++ */
++
++ ret = mtd->write(mtd, pos, len, &retlen, buf);
++ if (ret)
++ return ret;
++ if (retlen != len)
++ return -EIO;
++ return 0;
++}
++
++
++static int
++find_dual_image_off(struct mtd_info *mtd)
++{
++ struct trx_header trx;
++ int off, blocksize;
++ size_t len;
++
++ blocksize = mtd->erasesize;
++ if (blocksize < 0x10000)
++ blocksize = 0x10000;
++
++ for (off = (128*1024); off < mtd->size; off += blocksize) {
++ memset(&trx, 0xe5, sizeof(trx));
++ /*
++ * Read into buffer
++ */
++ if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
++ len != sizeof(trx))
++ continue;
++ /* found last TRX header */
++ if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
++ if (le32_to_cpu(trx.flag_version >> 16) == 2) {
++ pr_notice("dual image TRX header found\n");
++ return mtd->size / 2;
++ } else {
++ return 0;
++ }
++ }
++ }
++ return 0;
++}
++
++
++static int
++find_root(struct mtd_info *mtd, struct mtd_partition *part)
++{
++ struct trx_header trx, *trx2;
++ unsigned char buf[512], *block;
++ int off, blocksize, trxoff = 0;
++ u32 i, crc = ~0;
++ size_t len;
++ bool edimax = false;
++
++ blocksize = mtd->erasesize;
++ if (blocksize < 0x10000)
++ blocksize = 0x10000;
++
++ for (off = (128*1024); off < mtd->size; off += blocksize) {
++ memset(&trx, 0xe5, sizeof(trx));
++
++ /*
++ * Read into buffer
++ */
++ if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
++ len != sizeof(trx))
++ continue;
++
++ /* found an edimax header */
++ if (le32_to_cpu(trx.magic) == EDIMAX_PS_HEADER_MAGIC) {
++ /* read the correct trx header */
++ if (mtd->read(mtd, off + EDIMAX_PS_HEADER_LEN,
++ sizeof(trx), &len, (char *) &trx) ||
++ len != sizeof(trx)) {
++ continue;
++ } else {
++ pr_notice("Found an edimax ps header\n");
++ edimax = true;
++ }
++ }
++
++ /* found a TRX header */
++ if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
++ part->offset = le32_to_cpu(trx.offsets[2]) ? :
++ le32_to_cpu(trx.offsets[1]);
++ part->size = le32_to_cpu(trx.len);
++
++ part->size -= part->offset;
++ part->offset += off;
++ if (edimax) {
++ off += EDIMAX_PS_HEADER_LEN;
++ trxoff = EDIMAX_PS_HEADER_LEN;
++ }
++
++ goto found;
++ }
++ }
++
++ pr_warn("%s: Couldn't find root filesystem\n",
++ mtd->name);
++ return -1;
++
++ found:
++ pr_notice("TRX offset : %x\n", trxoff);
++ if (part->size == 0)
++ return 0;
++
++ if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf))
++ return 0;
++
++ /* Move the fs outside of the trx */
++ part->size = 0;
++
++ if (trx.len != part->offset + part->size - off) {
++ /* Update the trx offsets and length */
++ trx.len = part->offset + part->size - off;
++
++ /* Update the trx crc32 */
++ for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) {
++ if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf))
++ return 0;
++ crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i));
++ }
++ trx.crc32 = crc;
++
++ /* read first eraseblock from the trx */
++ block = kmalloc(mtd->erasesize, GFP_KERNEL);
++ trx2 = (struct trx_header *) block;
++ if (mtd->read(mtd, off - trxoff, mtd->erasesize, &len, block) || len != mtd->erasesize) {
++ pr_err("Error accessing the first trx eraseblock\n");
++ return 0;
++ }
++
++ pr_notice("Updating TRX offsets and length:\n");
++ pr_notice("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32);
++ pr_notice("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx.offsets[0], trx.offsets[1], trx.offsets[2], trx.len, trx.crc32);
++
++ /* Write updated trx header to the flash */
++ memcpy(block + trxoff, &trx, sizeof(trx));
++ if (mtd->unlock)
++ mtd->unlock(mtd, off - trxoff, mtd->erasesize);
++ erase_write(mtd, off - trxoff, mtd->erasesize, block);
++ if (mtd->sync)
++ mtd->sync(mtd);
++ kfree(block);
++ pr_notice("Done\n");
++ }
++
++ return part->size;
++}
++
++static int get_router(void)
++{
++ char buf[20];
++ u32 boardnum = 0;
++ u16 boardtype = 0;
++ u16 boardrev = 0;
++ u32 boardflags = 0;
++ u16 sdram_init = 0;
++ u16 cardbus = 0;
++ u16 strev = 0;
++
++ if (nvram_getenv("boardnum", buf, sizeof(buf)) >= 0)
++ boardnum = simple_strtoul(buf, NULL, 0);
++ if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
++ boardtype = simple_strtoul(buf, NULL, 0);
++ if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
++ boardrev = simple_strtoul(buf, NULL, 0);
++ if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0)
++ boardflags = simple_strtoul(buf, NULL, 0);
++ if (nvram_getenv("sdram_init", buf, sizeof(buf)) >= 0)
++ sdram_init = simple_strtoul(buf, NULL, 0);
++ if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
++ cardbus = simple_strtoul(buf, NULL, 0);
++ if (nvram_getenv("st_rev", buf, sizeof(buf)) >= 0)
++ strev = simple_strtoul(buf, NULL, 0);
++
++ if ((boardnum == 8 || boardnum == 01)
++ && boardtype == 0x0472 && cardbus == 1) {
++ /* Netgear WNR834B, Netgear WNR834Bv2 */
++ return ROUTER_NETGEAR_WNR834B;
++ }
++
++ if (boardnum == 01 && boardtype == 0x0472 && boardrev == 0x23) {
++ /* Netgear WNDR-3300 */
++ return ROUTER_NETGEAR_WNDR3300;
++ }
++
++ if ((boardnum == 83258 || boardnum == 01)
++ && boardtype == 0x048e
++ && (boardrev == 0x11 || boardrev == 0x10)
++ && boardflags == 0x750
++ && sdram_init == 0x000A) {
++ /* Netgear WGR614v8/L/WW 16MB ram, cfe v1.3 or v1.5 */
++ return ROUTER_NETGEAR_WGR614L;
++ }
++
++ if ((boardnum == 1 || boardnum == 3500)
++ && boardtype == 0x04CF
++ && (boardrev == 0x1213 || boardrev == 02)) {
++ /* Netgear WNR3500v2/U/L */
++ return ROUTER_NETGEAR_WNR3500L;
++ }
++
++ if (boardnum == 1 && boardtype == 0xb4cf && boardrev == 0x1100) {
++ /* Netgear WNDR3400 */
++ return ROUTER_NETGEAR_WNDR3400;
++ }
++
++ if (boardtype == 0x042f
++ && boardrev == 0x10
++ && boardflags == 0
++ && strev == 0x11) {
++ /* Simpletech Simpleshare */
++ return ROUTER_SIMPLETECH_SIMPLESHARE;
++ }
++
++ return 0;
++}
++
++static int parse_bcm47xx_partitions(struct mtd_info *mtd,
++ struct mtd_partition **pparts,
++ struct mtd_part_parser_data *data)
++{
++ int cfe_size;
++ int dual_image_offset = 0;
++ /* e.g Netgear 0x003e0000-0x003f0000 : "board_data", we exclude this
++ * part from our mapping to prevent overwriting len/checksum on e.g.
++ * Netgear WGR614v8/L/WW
++ */
++ int custom_data_size = 0;
++ struct mtd_partition *bcm47xx_parts;
++
++ cfe_size = find_cfe_size(mtd);
++ if (cfe_size < 0)
++ return 0;
++
++ bcm47xx_parts = kzalloc(sizeof(struct mtd_partition) * 6, GFP_KERNEL);
++
++ bcm47xx_parts[0].name = "cfe";
++ bcm47xx_parts[1].name = "linux";
++ bcm47xx_parts[2].name = "rootfs";
++ bcm47xx_parts[3].name = "nvram";
++
++ /* boot loader */
++ bcm47xx_parts[0].mask_flags = MTD_WRITEABLE;
++ bcm47xx_parts[0].offset = 0;
++ bcm47xx_parts[0].size = cfe_size;
++
++ /* nvram */
++ if (cfe_size != 384 * 1024) {
++
++ switch (get_router()) {
++ case ROUTER_NETGEAR_WGR614L:
++ case ROUTER_NETGEAR_WNR834B:
++ case ROUTER_NETGEAR_WNDR3300:
++ case ROUTER_NETGEAR_WNR3500L:
++ case ROUTER_NETGEAR_WNDR3400:
++ /* Netgear: checksum is @ 0x003AFFF8 for 4M flash or checksum
++ * is @ 0x007AFFF8 for 8M flash
++ */
++ custom_data_size = mtd->erasesize;
++
++ bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize);
++ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize);
++
++ /* Place CFE board_data into a partition */
++ bcm47xx_parts[4].name = "board_data";
++ bcm47xx_parts[4].offset = bcm47xx_parts[3].offset - custom_data_size;
++ bcm47xx_parts[4].size = custom_data_size;
++ break;
++
++ case ROUTER_SIMPLETECH_SIMPLESHARE:
++ /* Fixup Simpletech Simple share nvram */
++
++ pr_notice("Setting up simpletech nvram\n");
++ custom_data_size = mtd->erasesize;
++
++ bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize) * 2;
++ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize);
++
++ /* Place backup nvram into a partition */
++ bcm47xx_parts[4].name = "nvram_copy";
++ bcm47xx_parts[4].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize);
++ bcm47xx_parts[4].size = roundup(NVRAM_SPACE, mtd->erasesize);
++ break;
++
++ default:
++ bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize);
++ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize);
++ }
++
++ } else {
++ /* nvram (old 128kb config partition on netgear wgt634u) */
++ bcm47xx_parts[3].offset = bcm47xx_parts[0].size;
++ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize);
++ }
++
++ /* dual image offset*/
++ pr_notice("Looking for dual image\n");
++ dual_image_offset = find_dual_image_off(mtd);
++ /* linux (kernel and rootfs) */
++ if (cfe_size != 384 * 1024) {
++ if (get_router() == ROUTER_SIMPLETECH_SIMPLESHARE) {
++ bcm47xx_parts[1].offset = bcm47xx_parts[0].size;
++ bcm47xx_parts[1].size = bcm47xx_parts[4].offset - dual_image_offset -
++ bcm47xx_parts[1].offset - custom_data_size;
++ } else {
++ bcm47xx_parts[1].offset = bcm47xx_parts[0].size;
++ bcm47xx_parts[1].size = bcm47xx_parts[3].offset - dual_image_offset -
++ bcm47xx_parts[1].offset - custom_data_size;
++ }
++ } else {
++ /* do not count the elf loader, which is on one block */
++ bcm47xx_parts[1].offset = bcm47xx_parts[0].size +
++ bcm47xx_parts[3].size + mtd->erasesize;
++ bcm47xx_parts[1].size = mtd->size -
++ bcm47xx_parts[0].size -
++ (2*bcm47xx_parts[3].size) -
++ mtd->erasesize - custom_data_size;
++ }
++
++ /* find and size rootfs */
++ find_root(mtd, &bcm47xx_parts[2]);
++ bcm47xx_parts[2].size = mtd->size - dual_image_offset -
++ bcm47xx_parts[2].offset -
++ bcm47xx_parts[3].size - custom_data_size;
++ *pparts = bcm47xx_parts;
++ return bcm47xx_parts[4].name == NULL ? 4 : 5;
++}
++
++static struct mtd_part_parser bcm47xx_parser = {
++ .owner = THIS_MODULE,
++ .parse_fn = parse_bcm47xx_partitions,
++ .name = "bcm47xx",
++};
++
++static int __init bcm47xx_parser_init(void)
++{
++ return register_mtd_parser(&bcm47xx_parser);
++}
++
++static void __exit bcm47xx_parser_exit(void)
++{
++ deregister_mtd_parser(&bcm47xx_parser);
++}
++
++module_init(bcm47xx_parser_init);
++module_exit(bcm47xx_parser_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Parsing code for flash partitions on bcm47xx SoCs");
diff --git a/target/linux/brcm47xx/patches-3.2/0018-mtd-bcm47xx-add-parallel-flash-driver.patch b/target/linux/brcm47xx/patches-3.2/0018-mtd-bcm47xx-add-parallel-flash-driver.patch
new file mode 100644
index 0000000000..613dc8914c
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0018-mtd-bcm47xx-add-parallel-flash-driver.patch
@@ -0,0 +1,230 @@
+From 36f8b899174a445a98fe02ed8d1db177525f0c52 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 17 Jul 2011 14:55:18 +0200
+Subject: [PATCH 07/15] mtd: bcm47xx: add parallel flash driver
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/mtd/maps/Kconfig | 9 ++
+ drivers/mtd/maps/Makefile | 1 +
+ drivers/mtd/maps/bcm47xx-pflash.c | 188 +++++++++++++++++++++++++++++++++++++
+ 3 files changed, 198 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/mtd/maps/bcm47xx-pflash.c
+
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -257,6 +257,15 @@ config MTD_LANTIQ
+ help
+ Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
+
++config MTD_BCM47XX_PFLASH
++ tristate "bcm47xx parallel flash support"
++ default y
++ depends on BCM47XX
++ select MTD_PARTITIONS
++ select MTD_BCM47XX_PARTS
++ help
++ Support for bcm47xx parallel flash
++
+ config MTD_DILNETPC
+ tristate "CFI Flash device mapped on DIL/Net PC"
+ depends on X86 && MTD_CFI_INTELEXT && BROKEN
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -58,3 +58,4 @@ obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr
+ obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o
+ obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
+ obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
++obj-$(CONFIG_MTD_BCM47XX_PFLASH)+= bcm47xx-pflash.o
+--- /dev/null
++++ b/drivers/mtd/maps/bcm47xx-pflash.c
+@@ -0,0 +1,188 @@
++/*
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
++ *
++ * original functions for finding root filesystem from Mike Baker
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * Flash mapping for BCM947XX boards
++ */
++
++#define pr_fmt(fmt) "bcm47xx_pflash: " fmt
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <linux/io.h>
++#include <asm/mach-bcm47xx/bcm47xx.h>
++#include <linux/platform_device.h>
++
++#define WINDOW_ADDR 0x1fc00000
++#define WINDOW_SIZE 0x400000
++#define BUSWIDTH 2
++
++static struct mtd_info *bcm47xx_mtd;
++
++static void bcm47xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
++{
++ if (len == 1) {
++ memcpy_fromio(to, map->virt + from, len);
++ } else {
++ int i;
++ u16 *dest = (u16 *) to;
++ u16 *src = (u16 *) (map->virt + from);
++ for (i = 0; i < (len / 2); i++)
++ dest[i] = src[i];
++ if (len & 1)
++ *((u8 *)dest+len-1) = src[i] & 0xff;
++ }
++}
++
++static struct map_info bcm47xx_map = {
++ name: "Physically mapped flash",
++ size : WINDOW_SIZE,
++ bankwidth : BUSWIDTH,
++ phys : WINDOW_ADDR,
++};
++
++static const char *probes[] = { "bcm47xx", NULL };
++
++static int bcm47xx_mtd_probe(struct platform_device *pdev)
++{
++#ifdef CONFIG_BCM47XX_SSB
++ struct ssb_chipcommon *ssb_cc;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ struct bcma_drv_cc *bcma_cc;
++#endif
++ int ret = 0;
++
++ switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++ case BCM47XX_BUS_TYPE_SSB:
++ ssb_cc = &bcm47xx_bus.ssb.chipco;
++ if (ssb_cc->flash_type != SSB_PFLASH)
++ return -ENODEV;
++
++ bcm47xx_map.phys = ssb_cc->pflash.window;
++ bcm47xx_map.size = ssb_cc->pflash.window_size;
++ bcm47xx_map.bankwidth = ssb_cc->pflash.buswidth;
++ break;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
++ if (bcma_cc->flash_type != BCMA_PFLASH)
++ return -ENODEV;
++
++ bcm47xx_map.phys = bcma_cc->pflash.window;
++ bcm47xx_map.size = bcma_cc->pflash.window_size;
++ bcm47xx_map.bankwidth = bcma_cc->pflash.buswidth;
++ break;
++#endif
++ }
++
++ pr_notice("flash init: 0x%08x 0x%08lx\n", bcm47xx_map.phys, bcm47xx_map.size);
++ bcm47xx_map.virt = ioremap_nocache(bcm47xx_map.phys, bcm47xx_map.size);
++
++ if (!bcm47xx_map.virt) {
++ pr_err("Failed to ioremap\n");
++ return -EIO;
++ }
++
++ simple_map_init(&bcm47xx_map);
++ /* override copy_from routine */
++ bcm47xx_map.copy_from = bcm47xx_map_copy_from;
++
++ bcm47xx_mtd = do_map_probe("cfi_probe", &bcm47xx_map);
++ if (!bcm47xx_mtd) {
++ pr_err("Failed to do_map_probe\n");
++ ret = -ENXIO;
++ goto err_unmap;
++ }
++ bcm47xx_mtd->owner = THIS_MODULE;
++
++ pr_notice("Flash device: 0x%lx at 0x%x\n", bcm47xx_map.size, WINDOW_ADDR);
++
++ ret = mtd_device_parse_register(bcm47xx_mtd, probes, NULL, NULL, 0);
++
++ if (ret) {
++ pr_err("Flash: mtd_device_register failed\n");
++ goto err_destroy;
++ }
++ return 0;
++
++err_destroy:
++ map_destroy(bcm47xx_mtd);
++err_unmap:
++ iounmap(bcm47xx_map.virt);
++ return ret;
++}
++
++static int __devexit bcm47xx_mtd_remove(struct platform_device *pdev)
++{
++ mtd_device_unregister(bcm47xx_mtd);
++ map_destroy(bcm47xx_mtd);
++ iounmap(bcm47xx_map.virt);
++ return 0;
++}
++
++static struct platform_driver bcm47xx_mtd_driver = {
++ .remove = __devexit_p(bcm47xx_mtd_remove),
++ .driver = {
++ .name = "bcm47xx_pflash",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init init_bcm47xx_mtd(void)
++{
++ int ret = platform_driver_probe(&bcm47xx_mtd_driver, bcm47xx_mtd_probe);
++
++ if (ret)
++ pr_err("error registering platform driver: %i\n", ret);
++ return ret;
++}
++
++static void __exit exit_bcm47xx_mtd(void)
++{
++ platform_driver_unregister(&bcm47xx_mtd_driver);
++}
++
++module_init(init_bcm47xx_mtd);
++module_exit(exit_bcm47xx_mtd);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("BCM47XX parallel flash driver");
diff --git a/target/linux/brcm47xx/patches-3.2/0019-mtd-bcm47xx-add-serial-flash-driver.patch b/target/linux/brcm47xx/patches-3.2/0019-mtd-bcm47xx-add-serial-flash-driver.patch
new file mode 100644
index 0000000000..1b5dafabd8
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0019-mtd-bcm47xx-add-serial-flash-driver.patch
@@ -0,0 +1,315 @@
+From 2e2951220bf63e05449c03a95453680da1029e44 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 17 Jul 2011 14:55:45 +0200
+Subject: [PATCH 08/15] mtd: bcm47xx: add serial flash driver
+
+sflash get the sflash ops from platform device
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/include/asm/mach-bcm47xx/bus.h | 3 +
+ drivers/mtd/maps/Kconfig | 9 +
+ drivers/mtd/maps/Makefile | 1 +
+ drivers/mtd/maps/bcm47xx-sflash.c | 252 ++++++++++++++++++++++++++++++
+ 4 files changed, 265 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/mtd/maps/bcm47xx-sflash.c
+
+--- a/arch/mips/include/asm/mach-bcm47xx/bus.h
++++ b/arch/mips/include/asm/mach-bcm47xx/bus.h
+@@ -11,6 +11,7 @@
+
+ #include <linux/ssb/ssb.h>
+ #include <linux/bcma/bcma.h>
++#include <linux/mtd/mtd.h>
+ #include <bcm47xx.h>
+
+ struct bcm47xx_sflash {
+@@ -29,6 +30,8 @@ struct bcm47xx_sflash {
+ u32 blocksize; /* Block size */
+ u32 numblocks; /* Number of blocks */
+ u32 size; /* Total size in bytes */
++
++ struct mtd_info *mtd;
+ };
+
+ void bcm47xx_sflash_struct_bcma_init(struct bcm47xx_sflash *sflash, struct bcma_drv_cc *bcc);
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -266,6 +266,15 @@ config MTD_BCM47XX_PFLASH
+ help
+ Support for bcm47xx parallel flash
+
++config MTD_BCM47XX_SFLASH
++ tristate "bcm47xx serial flash support"
++ default y
++ depends on BCM47XX
++ select MTD_PARTITIONS
++ select MTD_BCM47XX_PARTS
++ help
++ Support for bcm47xx parallel flash
++
+ config MTD_DILNETPC
+ tristate "CFI Flash device mapped on DIL/Net PC"
+ depends on X86 && MTD_CFI_INTELEXT && BROKEN
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -59,3 +59,4 @@ obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-f
+ obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
+ obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
+ obj-$(CONFIG_MTD_BCM47XX_PFLASH)+= bcm47xx-pflash.o
++obj-$(CONFIG_MTD_BCM47XX_SFLASH)+= bcm47xx-sflash.o
+--- /dev/null
++++ b/drivers/mtd/maps/bcm47xx-sflash.c
+@@ -0,0 +1,252 @@
++/*
++ * Broadcom SiliconBackplane chipcommon serial flash interface
++ *
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */
++
++#define pr_fmt(fmt) "bcm47xx_sflash: " fmt
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <bcm47xx.h>
++#include <bus.h>
++
++static int
++sflash_mtd_poll(struct bcm47xx_sflash *sflash, unsigned int offset, int timeout)
++{
++ unsigned long now = jiffies;
++ int ret = 0;
++
++ for (;;) {
++ if (!sflash->poll(sflash, offset)) {
++ ret = 0;
++ break;
++ }
++ if (time_after(jiffies, now + timeout)) {
++ pr_err("timeout while polling\n");
++ ret = -ETIMEDOUT;
++ break;
++ }
++ udelay(1);
++ }
++
++ return ret;
++}
++
++static int
++sflash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++{
++ struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv;
++
++ /* Check address range */
++ if (!len)
++ return 0;
++
++ if ((from + len) > mtd->size)
++ return -EINVAL;
++
++ *retlen = 0;
++
++ while (len) {
++ int ret = sflash->read(sflash, from, len, buf);
++ if (ret < 0)
++ return ret;
++
++ from += (loff_t) ret;
++ len -= ret;
++ buf += ret;
++ *retlen += ret;
++ }
++
++ return 0;
++}
++
++static int
++sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
++{
++ struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv;
++
++ /* Check address range */
++ if (!len)
++ return 0;
++
++ if ((to + len) > mtd->size)
++ return -EINVAL;
++
++ *retlen = 0;
++ while (len) {
++ int bytes;
++ int ret = sflash->write(sflash, to, len, buf);
++ if (ret < 0)
++ return ret;
++
++ bytes = ret;
++
++ ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10);
++ if (ret)
++ return ret;
++
++ to += (loff_t) bytes;
++ len -= bytes;
++ buf += bytes;
++ *retlen += bytes;
++ }
++
++ return 0;
++}
++
++static int
++sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase)
++{
++ struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv;
++ int i, j, ret = 0;
++ unsigned int addr, len;
++
++ /* Check address range */
++ if (!erase->len)
++ return 0;
++ if ((erase->addr + erase->len) > mtd->size)
++ return -EINVAL;
++
++ addr = erase->addr;
++ len = erase->len;
++
++ /* Ensure that requested regions are aligned */
++ for (i = 0; i < mtd->numeraseregions; i++) {
++ for (j = 0; j < mtd->eraseregions[i].numblocks; j++) {
++ if (addr == mtd->eraseregions[i].offset +
++ mtd->eraseregions[i].erasesize * j &&
++ len >= mtd->eraseregions[i].erasesize) {
++ ret = sflash->erase(sflash, addr);
++ if (ret < 0)
++ break;
++ ret = sflash_mtd_poll(sflash, addr, 10 * HZ);
++ if (ret)
++ break;
++ addr += mtd->eraseregions[i].erasesize;
++ len -= mtd->eraseregions[i].erasesize;
++ }
++ }
++ if (ret)
++ break;
++ }
++
++ /* Set erase status */
++ if (ret)
++ erase->state = MTD_ERASE_FAILED;
++ else
++ erase->state = MTD_ERASE_DONE;
++
++ /* Call erase callback */
++ if (erase->callback)
++ erase->callback(erase);
++
++ return ret;
++}
++
++static const char *probes[] = { "bcm47xx", NULL };
++
++static int bcm47xx_sflash_probe(struct platform_device *pdev)
++{
++ struct bcm47xx_sflash *sflash = dev_get_platdata(&pdev->dev);
++ struct mtd_info *mtd;
++ struct mtd_erase_region_info *regions;
++ int ret = 0;
++
++ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
++ if (!mtd)
++ return -ENOMEM;
++
++ regions = kzalloc(sizeof(struct mtd_erase_region_info), GFP_KERNEL);
++ if (!mtd)
++ return -ENOMEM;
++
++ pr_info("found serial flash: blocksize=%dKB, numblocks=%d, size=%dKB\n",
++ sflash->blocksize/1024, sflash->numblocks, sflash->size / 1024);
++
++ /* Setup region info */
++ regions->offset = 0;
++ regions->erasesize = sflash->blocksize;
++ regions->numblocks = sflash->numblocks;
++ if (regions->erasesize > mtd->erasesize)
++ mtd->erasesize = regions->erasesize;
++ mtd->size = sflash->size;
++ mtd->numeraseregions = 1;
++
++ /* Register with MTD */
++ mtd->name = "bcm47xx-sflash";
++ mtd->type = MTD_NORFLASH;
++ mtd->flags = MTD_CAP_NORFLASH;
++ mtd->eraseregions = regions;
++ mtd->erase = sflash_mtd_erase;
++ mtd->read = sflash_mtd_read;
++ mtd->write = sflash_mtd_write;
++ mtd->writesize = 1;
++ mtd->priv = sflash;
++ mtd->owner = THIS_MODULE;
++
++ ret = mtd_device_parse_register(mtd, probes, NULL, NULL, 0);
++
++ if (ret) {
++ pr_err("mtd_device_register failed\n");
++ return ret;
++ }
++ sflash->mtd = mtd;
++ return 0;
++}
++
++static int __devexit bcm47xx_sflash_remove(struct platform_device *pdev)
++{
++ struct bcm47xx_sflash *sflash = dev_get_platdata(&pdev->dev);
++
++ if (sflash) {
++ mtd_device_unregister(sflash->mtd);
++ map_destroy(sflash->mtd);
++ kfree(sflash->mtd->eraseregions);
++ kfree(sflash->mtd);
++ }
++ return 0;
++}
++
++static struct platform_driver bcm47xx_sflash_driver = {
++ .remove = __devexit_p(bcm47xx_sflash_remove),
++ .driver = {
++ .name = "bcm47xx_sflash",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init init_bcm47xx_sflash(void)
++{
++ int ret = platform_driver_probe(&bcm47xx_sflash_driver, bcm47xx_sflash_probe);
++
++ if (ret)
++ pr_err("error registering platform driver: %i\n", ret);
++ return ret;
++}
++
++static void __exit exit_bcm47xx_sflash(void)
++{
++ platform_driver_unregister(&bcm47xx_sflash_driver);
++}
++
++module_init(init_bcm47xx_sflash);
++module_exit(exit_bcm47xx_sflash);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("BCM47XX parallel flash driver");
diff --git a/target/linux/brcm47xx/patches-3.2/0020-bcm47xx-register-flash-drivers.patch b/target/linux/brcm47xx/patches-3.2/0020-bcm47xx-register-flash-drivers.patch
new file mode 100644
index 0000000000..f8978b0b8f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0020-bcm47xx-register-flash-drivers.patch
@@ -0,0 +1,100 @@
+From 64f3d068654589d6114048ac5933cd4498706cfc Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 17 Jul 2011 15:02:10 +0200
+Subject: [PATCH 20/26] bcm47xx: register flash drivers
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/setup.c | 72 +++++++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 72 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -31,10 +31,12 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_embedded.h>
+ #include <linux/bcma/bcma_soc.h>
++#include <linux/platform_device.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+ #include <bcm47xx.h>
++#include <bus.h>
+ #include <asm/mach-bcm47xx/nvram.h>
+
+ union bcm47xx_bus bcm47xx_bus;
+@@ -366,3 +368,73 @@ static int __init bcm47xx_register_bus_c
+ return 0;
+ }
+ device_initcall(bcm47xx_register_bus_complete);
++
++static struct resource bcm47xx_pflash_resource = {
++ .name = "bcm47xx_pflash",
++ .start = 0,
++ .end = 0,
++ .flags = 0,
++};
++
++static struct platform_device bcm47xx_pflash_dev = {
++ .name = "bcm47xx_pflash",
++ .resource = &bcm47xx_pflash_resource,
++ .num_resources = 1,
++};
++
++static struct resource bcm47xx_sflash_resource = {
++ .name = "bcm47xx_sflash",
++ .start = 0,
++ .end = 0,
++ .flags = 0,
++};
++
++static struct platform_device bcm47xx_sflash_dev = {
++ .name = "bcm47xx_sflash",
++ .resource = &bcm47xx_sflash_resource,
++ .num_resources = 1,
++};
++
++static int __init bcm47xx_register_flash(void)
++{
++#ifdef CONFIG_BCM47XX_SSB
++ struct ssb_chipcommon *chipco;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ struct bcma_drv_cc *drv_cc;
++#endif
++ switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++ case BCM47XX_BUS_TYPE_SSB:
++ chipco = &bcm47xx_bus.ssb.chipco;
++ if (chipco->flash_type == SSB_PFLASH) {
++ bcm47xx_pflash_resource.start = chipco->pflash.window;
++ bcm47xx_pflash_resource.end = chipco->pflash.window + chipco->pflash.window_size;
++ return platform_device_register(&bcm47xx_pflash_dev);
++ } else if (chipco->flash_type == SSB_SFLASH) {
++ bcm47xx_sflash_dev.dev.platform_data = &bcm47xx_sflash;
++ return platform_device_register(&bcm47xx_sflash_dev);
++ } else {
++ printk(KERN_ERR "No flash device found\n");
++ return -1;
++ }
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ drv_cc = &bcm47xx_bus.bcma.bus.drv_cc;
++ if (drv_cc->flash_type == BCMA_PFLASH) {
++ bcm47xx_pflash_resource.start = drv_cc->pflash.window;
++ bcm47xx_pflash_resource.end = drv_cc->pflash.window + drv_cc->pflash.window_size;
++ return platform_device_register(&bcm47xx_pflash_dev);
++ } else if (drv_cc->flash_type == BCMA_SFLASH) {
++ bcm47xx_sflash_dev.dev.platform_data = &bcm47xx_sflash;
++ return platform_device_register(&bcm47xx_sflash_dev);
++ } else {
++ printk(KERN_ERR "No flash device found\n");
++ return -1;
++ }
++#endif
++ }
++ return -1;
++}
++fs_initcall(bcm47xx_register_flash);
diff --git a/target/linux/brcm47xx/patches-3.2/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch b/target/linux/brcm47xx/patches-3.2/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch
new file mode 100644
index 0000000000..fee1d0a5a6
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch
@@ -0,0 +1,33 @@
+From e6730c06cfc827d715f43e9bd276ae939bb86af9 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Fri, 22 Jul 2011 17:11:51 +0200
+Subject: [PATCH 23/26] bcma: use randoom mac address as long as reading it out does not work
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/sprom.c | 5 ++++-
+ 1 files changed, 4 insertions(+), 1 deletions(-)
+
+--- a/drivers/bcma/sprom.c
++++ b/drivers/bcma/sprom.c
+@@ -13,6 +13,7 @@
+ #include <linux/io.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/slab.h>
++#include <linux/etherdevice.h>
+
+ #define SPOFF(offset) ((offset) / sizeof(u16))
+
+@@ -214,8 +215,10 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ if (!bus->drv_cc.core)
+ return -EOPNOTSUPP;
+
+- if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) {
++ random_ether_addr(bus->sprom.il0mac);
+ return -ENOENT;
++ }
+
+ sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+ GFP_KERNEL);
diff --git a/target/linux/brcm47xx/patches-3.2/0025-bcm47xx-read-nvram-from-sflash.patch b/target/linux/brcm47xx/patches-3.2/0025-bcm47xx-read-nvram-from-sflash.patch
new file mode 100644
index 0000000000..d3781b8fe5
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0025-bcm47xx-read-nvram-from-sflash.patch
@@ -0,0 +1,118 @@
+From 1d693b2c9d5943cbe938f879041b837cd004737f Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 23 Jul 2011 18:29:38 +0200
+Subject: [PATCH 25/26] bcm47xx: read nvram from sflash
+
+bcm47xx: add sflash support to nvram
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/nvram.c | 86 +++++++++++++++++++++++++++++++++++++++++++-
+ 1 files changed, 84 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -20,11 +20,12 @@
+ #include <asm/addrspace.h>
+ #include <asm/mach-bcm47xx/nvram.h>
+ #include <asm/mach-bcm47xx/bcm47xx.h>
++#include <asm/mach-bcm47xx/bus.h>
+
+ static char nvram_buf[NVRAM_SPACE];
+
+ /* Probe for NVRAM header */
+-static void early_nvram_init(void)
++static void early_nvram_init_pflash(void)
+ {
+ #ifdef CONFIG_BCM47XX_SSB
+ struct ssb_chipcommon *ssb_cc;
+@@ -86,7 +87,88 @@ found:
+ for (i = 0; i < sizeof(struct nvram_header); i += 4)
+ *dst++ = *src++;
+ for (; i < header->len && i < NVRAM_SPACE; i += 4)
+- *dst++ = le32_to_cpu(*src++);
++ *dst++ = *src++;
++}
++
++static int early_nvram_init_sflash(void)
++{
++ struct nvram_header header;
++ u32 off;
++ int ret;
++ char *dst;
++ int len;
++
++ /* check if the struct is already initilized */
++ if (!bcm47xx_sflash.size)
++ return -1;
++
++ off = FLASH_MIN;
++ while (off <= bcm47xx_sflash.size) {
++ ret = bcm47xx_sflash.read(&bcm47xx_sflash, off - NVRAM_SPACE, sizeof(header), (u8 *)&header);
++ if (ret != sizeof(header))
++ return ret;
++ if (header.magic == NVRAM_HEADER)
++ goto found;
++ off <<= 1;
++ }
++
++ off = FLASH_MIN;
++ while (off <= bcm47xx_sflash.size) {
++ ret = bcm47xx_sflash.read(&bcm47xx_sflash, off - (2 * NVRAM_SPACE), sizeof(header), (u8 *)&header);
++ if (ret != sizeof(header))
++ return ret;
++ if (header.magic == NVRAM_HEADER)
++ goto found;
++ off <<= 1;
++ }
++ return -1;
++
++found:
++ len = NVRAM_SPACE;
++ dst = nvram_buf;
++ while (len) {
++ ret = bcm47xx_sflash.read(&bcm47xx_sflash, off - (2 * NVRAM_SPACE), len, dst);
++ if (ret < 0)
++ return ret;
++ off += ret;
++ len -= ret;
++ dst += ret;
++ }
++ return 0;
++}
++
++static void early_nvram_init(void)
++{
++ int err = 0;
++
++ switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++ case BCM47XX_BUS_TYPE_SSB:
++ if (bcm47xx_bus.ssb.chipco.flash_type == SSB_PFLASH) {
++ early_nvram_init_pflash();
++ } else if (bcm47xx_bus.ssb.chipco.flash_type == SSB_SFLASH) {
++ err = early_nvram_init_sflash();
++ if (err < 0)
++ printk(KERN_WARNING "can not read from flash: %i\n", err);
++ } else {
++ printk(KERN_WARNING "unknow flash type\n");
++ }
++ break;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_PFLASH) {
++ early_nvram_init_pflash();
++ } else if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_SFLASH) {
++ err = early_nvram_init_sflash();
++ if (err < 0)
++ printk(KERN_WARNING "can not read from flash: %i\n", err);
++ } else {
++ printk(KERN_WARNING "unknow flash type\n");
++ }
++ break;
++#endif
++ }
+ }
+
+ int nvram_getenv(char *name, char *val, size_t val_len)
diff --git a/target/linux/brcm47xx/patches-3.2/0026-bcma-export-needed-gpio-functions.patch b/target/linux/brcm47xx/patches-3.2/0026-bcma-export-needed-gpio-functions.patch
new file mode 100644
index 0000000000..7d172d4c93
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0026-bcma-export-needed-gpio-functions.patch
@@ -0,0 +1,47 @@
+From f6e41db3ee7ead99e1398def222c14893fc265de Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 4 Aug 2011 21:09:48 +0200
+Subject: [PATCH 26/26] bcma: export needed gpio functions
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/driver_chipcommon.c | 5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -81,16 +81,19 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+ {
+ return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_in);
+
+ u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
+
+ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
+
+ u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+@@ -102,11 +105,13 @@ u32 bcma_chipco_gpio_intmask(struct bcma
+ {
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_intmask);
+
+ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_polarity);
+
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
diff --git a/target/linux/brcm47xx/patches-3.2/0028-bcma-scan-for-extra-address-space.patch b/target/linux/brcm47xx/patches-3.2/0028-bcma-scan-for-extra-address-space.patch
new file mode 100644
index 0000000000..d74dfcb73e
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0028-bcma-scan-for-extra-address-space.patch
@@ -0,0 +1,60 @@
+From 1735daf1db79d338dccfc55444b52ed52af79e86 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 20 Nov 2011 18:22:35 +0100
+Subject: [PATCH 15/21] bcma: scan for extra address space
+
+Some cores like the USB core have two address spaces. In the USB host
+controller one address space is used for the OHCI and the other for the
+EHCI controller interface. The USB controller is the only core I found
+with two address spaces. This code is based on the AI scan function
+ai_scan() in shared/aiutils.c i the Broadcom SDK.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/scan.c | 17 ++++++++++++++++-
+ include/linux/bcma/bcma.h | 1 +
+ 2 files changed, 17 insertions(+), 1 deletions(-)
+
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -286,6 +286,21 @@ static int bcma_get_next_core(struct bcm
+ return -EILSEQ;
+ }
+
++
++ /* First Slave Address Descriptor should be port 0:
++ * the main register space for the core
++ */
++ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
++ if (tmp < 0) {
++ /* Try again to see if it is a bridge */
++ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_BRIDGE, 0);
++ if (tmp) {
++ printk("found bridge\n");
++ }
++
++ }
++ core->addr = tmp;
++
+ /* get & parse slave ports */
+ for (i = 0; i < ports[1]; i++) {
+ for (j = 0; ; j++) {
+@@ -298,7 +313,7 @@ static int bcma_get_next_core(struct bcm
+ break;
+ } else {
+ if (i == 0 && j == 0)
+- core->addr = tmp;
++ core->addr1 = tmp;
+ }
+ }
+ }
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -138,6 +138,7 @@ struct bcma_device {
+ u8 core_index;
+
+ u32 addr;
++ u32 addr1;
+ u32 wrap;
+
+ void __iomem *io_addr;
diff --git a/target/linux/brcm47xx/patches-3.2/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch b/target/linux/brcm47xx/patches-3.2/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch
new file mode 100644
index 0000000000..bfdc7f21c6
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch
@@ -0,0 +1,115 @@
+From 6e8ae6e2cee0e7e5939dc7042584c808366e61e0 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 27 Nov 2011 14:01:01 +0100
+Subject: [PATCH 16/21] =?UTF-8?q?bcma:=20add=20function=20to=20check=20every?=
+ =?UTF-8?q?=2010=20=C2=B5s=20if=20a=20reg=20is=20set?=
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This function checks if a reg get set or cleared every 10 microseconds.
+It is used in bcma_core_set_clockmode() and bcma_core_pll_ctl() to
+reduce code duplication. In addition it is needed in the USB host
+driver.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/core.c | 48 ++++++++++++++++++++++++++++----------------
+ include/linux/bcma/bcma.h | 2 +
+ 2 files changed, 32 insertions(+), 18 deletions(-)
+
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -52,11 +52,36 @@ int bcma_core_enable(struct bcma_device
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_enable);
+
++/* Wait for bitmask in a register to get set or cleared.
++ * timeout is in units of ten-microseconds.
++ */
++int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, int timeout,
++ int set)
++{
++ int i;
++ u32 val;
++
++ for (i = 0; i < timeout; i++) {
++ val = bcma_read32(dev, reg);
++ if (set) {
++ if ((val & bitmask) == bitmask)
++ return 0;
++ } else {
++ if (!(val & bitmask))
++ return 0;
++ }
++ udelay(10);
++ }
++ pr_err("Timeout waiting for bitmask %08X on register %04X to %s.\n",
++ bitmask, reg, (set ? "set" : "clear"));
++
++ return -ETIMEDOUT;
++}
++EXPORT_SYMBOL_GPL(bcma_wait_bits);
++
+ void bcma_core_set_clockmode(struct bcma_device *core,
+ enum bcma_clkmode clkmode)
+ {
+- u16 i;
+-
+ WARN_ON(core->id.id != BCMA_CORE_CHIPCOMMON &&
+ core->id.id != BCMA_CORE_PCIE &&
+ core->id.id != BCMA_CORE_80211);
+@@ -65,15 +90,8 @@ void bcma_core_set_clockmode(struct bcma
+ case BCMA_CLKMODE_FAST:
+ bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
+ udelay(64);
+- for (i = 0; i < 1500; i++) {
+- if (bcma_read32(core, BCMA_CLKCTLST) &
+- BCMA_CLKCTLST_HAVEHT) {
+- i = 0;
+- break;
+- }
+- udelay(10);
+- }
+- if (i)
++ if (bcma_wait_bits(core, BCMA_CLKCTLST, BCMA_CLKCTLST_HAVEHT,
++ 1500, 1))
+ pr_err("HT force timeout\n");
+ break;
+ case BCMA_CLKMODE_DYNAMIC:
+@@ -85,22 +103,12 @@ EXPORT_SYMBOL_GPL(bcma_core_set_clockmod
+
+ void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on)
+ {
+- u16 i;
+-
+ WARN_ON(req & ~BCMA_CLKCTLST_EXTRESREQ);
+ WARN_ON(status & ~BCMA_CLKCTLST_EXTRESST);
+
+ if (on) {
+ bcma_set32(core, BCMA_CLKCTLST, req);
+- for (i = 0; i < 10000; i++) {
+- if ((bcma_read32(core, BCMA_CLKCTLST) & status) ==
+- status) {
+- i = 0;
+- break;
+- }
+- udelay(10);
+- }
+- if (i)
++ if (bcma_wait_bits(core, BCMA_CLKCTLST, status, 10000, 1))
+ pr_err("PLL enable timeout\n");
+ } else {
+ pr_warn("Disabling PLL not supported yet!\n");
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -283,6 +283,9 @@ static inline void bcma_maskset16(struct
+ bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
+ }
+
++extern int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
++ int timeout, int set);
++
+ extern bool bcma_core_is_enabled(struct bcma_device *core);
+ extern void bcma_core_disable(struct bcma_device *core, u32 flags);
+ extern int bcma_core_enable(struct bcma_device *core, u32 flags);
diff --git a/target/linux/brcm47xx/patches-3.2/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch b/target/linux/brcm47xx/patches-3.2/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch
new file mode 100644
index 0000000000..4aeaa78aa4
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch
@@ -0,0 +1,291 @@
+From 14297ee700e1c2e04a35466304f9a3c5e1387146 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:20:54 +0100
+Subject: [PATCH 17/30] USB: OHCI: Add a generic platform device driver
+
+This adds a generic driver for platform devices. It works like the PCI
+driver and is based on it. This is for devices which do not have an own
+bus but their OHCI controller works like a PCI controller. It will be
+used for the Broadcom bcma and ssb USB OHCI controller.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 10 ++
+ drivers/usb/host/ohci-hcd.c | 21 ++++-
+ drivers/usb/host/ohci-platform.c | 197 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 227 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/usb/host/ohci-platform.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -378,6 +378,16 @@ config USB_CNS3XXX_OHCI
+ Enable support for the CNS3XXX SOC's on-chip OHCI controller.
+ It is needed for low-speed USB 1.0 device support.
+
++config USB_OHCI_HCD_PLATFORM
++ bool "OHCI driver for a platform device"
++ depends on USB_OHCI_HCD && EXPERIMENTAL
++ default n
++ ---help---
++ Adds an OHCI host driver for a generic platform device, which
++ provieds a memory space and an irq.
++
++ If unsure, say N.
++
+ config USB_OHCI_BIG_ENDIAN_DESC
+ bool
+ depends on USB_OHCI_HCD
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1116,6 +1116,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ohci_xls_driver
+ #endif
+
++#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
++#include "ohci-platform.c"
++#define PLATFORM_OHCI_DRIVER ohci_platform_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && \
+ !defined(PLATFORM_DRIVER) && \
+ !defined(OMAP1_PLATFORM_DRIVER) && \
+@@ -1125,7 +1130,8 @@ MODULE_LICENSE ("GPL");
+ !defined(PS3_SYSTEM_BUS_DRIVER) && \
+ !defined(SM501_OHCI_DRIVER) && \
+ !defined(TMIO_OHCI_DRIVER) && \
+- !defined(SSB_OHCI_DRIVER)
++ !defined(SSB_OHCI_DRIVER) && \
++ !defined(PLATFORM_OHCI_DRIVER)
+ #error "missing bus glue for ohci-hcd"
+ #endif
+
+@@ -1209,9 +1215,19 @@ static int __init ohci_hcd_mod_init(void
+ goto error_tmio;
+ #endif
+
++#ifdef PLATFORM_OHCI_DRIVER
++ retval = platform_driver_register(&PLATFORM_OHCI_DRIVER);
++ if (retval)
++ goto error_platform;
++#endif
++
+ return retval;
+
+ /* Error path */
++#ifdef PLATFORM_OHCI_DRIVER
++ platform_driver_unregister(&PLATFORM_OHCI_DRIVER);
++ error_platform:
++#endif
+ #ifdef TMIO_OHCI_DRIVER
+ platform_driver_unregister(&TMIO_OHCI_DRIVER);
+ error_tmio:
+@@ -1265,6 +1281,9 @@ module_init(ohci_hcd_mod_init);
+
+ static void __exit ohci_hcd_mod_exit(void)
+ {
++#ifdef PLATFORM_OHCI_DRIVER
++ platform_driver_unregister(&PLATFORM_OHCI_DRIVER);
++#endif
+ #ifdef TMIO_OHCI_DRIVER
+ platform_driver_unregister(&TMIO_OHCI_DRIVER);
+ #endif
+--- /dev/null
++++ b/drivers/usb/host/ohci-platform.c
+@@ -0,0 +1,197 @@
++/*
++ * Generic platform ohci driver
++ *
++ * Copyright 2007 Michael Buesch <m@bues.ch>
++ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Derived from the OHCI-PCI driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/platform_device.h>
++
++static int ohci_platform_reset(struct usb_hcd *hcd)
++{
++ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
++ int err;
++
++ ohci_hcd_init(ohci);
++ err = ohci_init(ohci);
++
++ return err;
++}
++
++static int ohci_platform_start(struct usb_hcd *hcd)
++{
++ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
++ int err;
++
++ err = ohci_run(ohci);
++ if (err < 0) {
++ ohci_err(ohci, "can't start\n");
++ ohci_stop(hcd);
++ }
++
++ return err;
++}
++
++static const struct hc_driver ohci_platform_hc_driver = {
++ .description = "platform-usb-ohci",
++ .product_desc = "Generic Platform OHCI Controller",
++ .hcd_priv_size = sizeof(struct ohci_hcd),
++
++ .irq = ohci_irq,
++ .flags = HCD_MEMORY | HCD_USB11,
++
++ .reset = ohci_platform_reset,
++ .start = ohci_platform_start,
++ .stop = ohci_stop,
++ .shutdown = ohci_shutdown,
++
++ .urb_enqueue = ohci_urb_enqueue,
++ .urb_dequeue = ohci_urb_dequeue,
++ .endpoint_disable = ohci_endpoint_disable,
++
++ .get_frame_number = ohci_get_frame,
++
++ .hub_status_data = ohci_hub_status_data,
++ .hub_control = ohci_hub_control,
++#ifdef CONFIG_PM
++ .bus_suspend = ohci_bus_suspend,
++ .bus_resume = ohci_bus_resume,
++#endif
++
++ .start_port_reset = ohci_start_port_reset,
++};
++
++static int ohci_platform_attach(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++ struct resource *res_irq, *res_mem;
++ int err = -ENOMEM;
++
++ hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
++ dev_name(&dev->dev));
++ if (!hcd)
++ goto err_return;
++
++ res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0);
++ if (!res_irq) {
++ err = -ENXIO;
++ goto err_return;
++ }
++ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
++ if (!res_mem) {
++ err = -ENXIO;
++ goto err_return;
++ }
++ hcd->rsrc_start = res_mem->start;
++ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
++
++ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs)
++ goto err_put_hcd;
++ err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED);
++ if (err)
++ goto err_iounmap;
++
++ platform_set_drvdata(dev, hcd);
++
++ return err;
++
++err_iounmap:
++ iounmap(hcd->regs);
++err_put_hcd:
++ usb_put_hcd(hcd);
++err_return:
++ return err;
++}
++
++static int ohci_platform_probe(struct platform_device *dev)
++{
++ int err;
++
++ if (usb_disabled())
++ return -ENODEV;
++
++ /* We currently always attach BCMA_DEV_USB11_HOSTDEV
++ * as HOST OHCI. If we want to attach it as Client device,
++ * we must branch here and call into the (yet to
++ * be written) Client mode driver. Same for remove(). */
++
++ err = ohci_platform_attach(dev);
++
++ return err;
++}
++
++static int ohci_platform_remove(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++
++ hcd = platform_get_drvdata(dev);
++ if (!hcd)
++ return -ENODEV;
++
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ usb_put_hcd(hcd);
++
++ return 0;
++}
++
++static void ohci_platform_shutdown(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++
++ hcd = platform_get_drvdata(dev);
++ if (!hcd)
++ return;
++
++ if (hcd->driver->shutdown)
++ hcd->driver->shutdown(hcd);
++}
++
++#ifdef CONFIG_PM
++
++static int ohci_platform_suspend(struct platform_device *dev,
++ pm_message_t state)
++{
++
++ return 0;
++}
++
++static int ohci_platform_resume(struct platform_device *dev)
++{
++ struct usb_hcd *hcd = platform_get_drvdata(dev);
++
++ ohci_finish_controller_resume(hcd);
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define ohci_platform_suspend NULL
++#define ohci_platform_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct platform_device_id ohci_platform_table[] = {
++ { "ohci-platform", 0 },
++ { }
++};
++MODULE_DEVICE_TABLE(platform, ohci_platform_table);
++
++static struct platform_driver ohci_platform_driver = {
++ .id_table = ohci_platform_table,
++ .probe = ohci_platform_probe,
++ .remove = ohci_platform_remove,
++ .shutdown = ohci_platform_shutdown,
++ .suspend = ohci_platform_suspend,
++ .resume = ohci_platform_resume,
++ .driver = {
++ .name = "ohci-platform",
++ }
++};
diff --git a/target/linux/brcm47xx/patches-3.2/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch b/target/linux/brcm47xx/patches-3.2/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch
new file mode 100644
index 0000000000..8cc0f07776
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch
@@ -0,0 +1,265 @@
+From 2ade1c32109d2f17fdfc0b414411d4ee7f828706 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:28:56 +0100
+Subject: [PATCH 18/30] USB: EHCI: Add a generic platform device driver
+
+This adds a generic driver for platform devices. It works like the PCI
+driver and is based on it. This is for devices which do not have an own
+bus but their EHCI controller works like a PCI controller. It will be
+used for the Broadcom bcma and ssb USB EHCI controller.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 10 ++
+ drivers/usb/host/ehci-hcd.c | 5 +
+ drivers/usb/host/ehci-platform.c | 211 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 226 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/ehci-platform.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -388,6 +388,16 @@ config USB_OHCI_HCD_PLATFORM
+
+ If unsure, say N.
+
++config USB_EHCI_HCD_PLATFORM
++ bool "Generic EHCI driver for a platform device"
++ depends on USB_EHCI_HCD && EXPERIMENTAL
++ default n
++ ---help---
++ Adds an EHCI host driver for a generic platform device, which
++ provieds a memory space and an irq.
++
++ If unsure, say N.
++
+ config USB_OHCI_BIG_ENDIAN_DESC
+ bool
+ depends on USB_OHCI_HCD
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1329,6 +1329,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ehci_xls_driver
+ #endif
+
++#ifdef CONFIG_USB_EHCI_HCD_PLATFORM
++#include "ehci-platform.c"
++#define PLATFORM_DRIVER ehci_platform_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+ !defined(XILINX_OF_PLATFORM_DRIVER)
+--- /dev/null
++++ b/drivers/usb/host/ehci-platform.c
+@@ -0,0 +1,211 @@
++/*
++ * Generic platform ehci driver
++ *
++ * Copyright 2007 Steven Brown <sbrown@cortland.com>
++ * Copyright 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Derived from the ohci-ssb driver
++ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
++ *
++ * Derived from the EHCI-PCI driver
++ * Copyright (c) 2000-2004 by David Brownell
++ *
++ * Derived from the ohci-pci driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/platform_device.h>
++
++static int ehci_platform_reset(struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++ int retval;
++
++ ehci->caps = hcd->regs;
++ ehci->regs = hcd->regs +
++ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
++
++ dbg_hcs_params(ehci, "reset");
++ dbg_hcc_params(ehci, "reset");
++
++ /* cache this readonly data; minimize chip reads */
++ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++
++ retval = ehci_halt(ehci);
++ if (retval)
++ return retval;
++
++ /* data structure init */
++ retval = ehci_init(hcd);
++ if (retval)
++ return retval;
++
++ ehci_reset(ehci);
++
++ ehci_port_power(ehci, 1);
++
++ return retval;
++}
++
++static const struct hc_driver ehci_platform_hc_driver = {
++ .description = "platform-usb-ehci",
++ .product_desc = "Generic Platform EHCI Controller",
++ .hcd_priv_size = sizeof(struct ehci_hcd),
++
++ .irq = ehci_irq,
++ .flags = HCD_MEMORY | HCD_USB2,
++
++ .reset = ehci_platform_reset,
++ .start = ehci_run,
++ .stop = ehci_stop,
++ .shutdown = ehci_shutdown,
++
++ .urb_enqueue = ehci_urb_enqueue,
++ .urb_dequeue = ehci_urb_dequeue,
++ .endpoint_disable = ehci_endpoint_disable,
++ .endpoint_reset = ehci_endpoint_reset,
++
++ .get_frame_number = ehci_get_frame,
++
++ .hub_status_data = ehci_hub_status_data,
++ .hub_control = ehci_hub_control,
++#if defined(CONFIG_PM)
++ .bus_suspend = ehci_bus_suspend,
++ .bus_resume = ehci_bus_resume,
++#endif
++ .relinquish_port = ehci_relinquish_port,
++ .port_handed_over = ehci_port_handed_over,
++
++ .update_device = ehci_update_device,
++
++ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
++};
++
++static int ehci_platform_attach(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++ struct resource *res_irq, *res_mem;
++ int err = -ENOMEM;
++
++ hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
++ dev_name(&dev->dev));
++ if (!hcd)
++ goto err_return;
++
++ res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0);
++ if (!res_irq) {
++ err = -ENXIO;
++ goto err_return;
++ }
++ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
++ if (!res_mem) {
++ err = -ENXIO;
++ goto err_return;
++ }
++ hcd->rsrc_start = res_mem->start;
++ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
++
++ /*
++ * start & size modified per sbutils.c
++ */
++ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs)
++ goto err_put_hcd;
++ err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED);
++ if (err)
++ goto err_iounmap;
++
++ platform_set_drvdata(dev, hcd);
++
++ return err;
++
++err_iounmap:
++ iounmap(hcd->regs);
++err_put_hcd:
++ usb_put_hcd(hcd);
++err_return:
++ return err;
++}
++
++static int ehci_platform_probe(struct platform_device *dev)
++{
++ int err;
++
++ if (usb_disabled())
++ return -ENODEV;
++
++ err = ehci_platform_attach(dev);
++
++ return err;
++}
++
++static int ehci_platform_remove(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++
++ hcd = platform_get_drvdata(dev);
++ if (!hcd)
++ return -ENODEV;
++
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ usb_put_hcd(hcd);
++
++ return 0;
++}
++
++static void ehci_platform_shutdown(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++
++ hcd = platform_get_drvdata(dev);
++ if (!hcd)
++ return;
++
++ if (hcd->driver->shutdown)
++ hcd->driver->shutdown(hcd);
++}
++
++#ifdef CONFIG_PM
++
++static int ehci_platform_suspend(struct platform_device *dev,
++ pm_message_t state)
++{
++ return 0;
++}
++
++static int ehci_platform_resume(struct platform_device *dev)
++{
++ struct usb_hcd *hcd = platform_get_drvdata(dev);
++
++ ehci_finish_controller_resume(hcd);
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define ehci_platform_suspend NULL
++#define ehci_platform_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct platform_device_id ehci_platform_table[] = {
++ { "ehci-platform", 0 },
++ { }
++};
++MODULE_DEVICE_TABLE(platform, ehci_platform_table);
++
++static struct platform_driver ehci_platform_driver = {
++ .id_table = ehci_platform_table,
++ .probe = ehci_platform_probe,
++ .remove = ehci_platform_remove,
++ .shutdown = ehci_platform_shutdown,
++ .suspend = ehci_platform_suspend,
++ .resume = ehci_platform_resume,
++ .driver = {
++ .name = "ehci-platform",
++ }
++};
diff --git a/target/linux/brcm47xx/patches-3.2/0032-USB-Add-driver-for-the-bcma-bus.patch b/target/linux/brcm47xx/patches-3.2/0032-USB-Add-driver-for-the-bcma-bus.patch
new file mode 100644
index 0000000000..598aedd26f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0032-USB-Add-driver-for-the-bcma-bus.patch
@@ -0,0 +1,358 @@
+From 0da055d81f77272ebc41d4c2cd5f533aa9025cc7 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:33:41 +0100
+Subject: [PATCH 19/30] USB: Add driver for the bcma bus
+
+This adds a USB driver using the generic platform device driver for the
+USB controller found on the Broadcom bcma bus. The bcma bus just
+exposes one device which serves the OHCI and the EHCI controller at the
+same time. This driver probes for this USB controller and creates and
+registers two new platform devices which will be probed by the new
+generic platform device driver. This makes it possible to use the EHCI
+and the OCHI controller on the bcma bus at the same time.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 12 ++
+ drivers/usb/host/Makefile | 1 +
+ drivers/usb/host/bcma-hcd.c | 309 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 322 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/bcma-hcd.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -618,3 +618,15 @@ config USB_PXA168_EHCI
+ help
+ Enable support for Marvell PXA168 SoC's on-chip EHCI
+ host controller
++
++config USB_HCD_BCMA
++ tristate "BCMA usb host driver"
++ depends on BCMA && EXPERIMENTAL
++ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
++ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
++ help
++ Enbale support for the EHCI and OCHI host controller on an bcma bus.
++ It converts the bcma driver into two platform device drivers
++ for ehci and ohci.
++
++ If unsure, say N.
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -37,3 +37,4 @@ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd
+ obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
+ obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+ obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
++obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
+--- /dev/null
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -0,0 +1,309 @@
++/*
++ * Broadcom specific Advanced Microcontroller Bus
++ * Broadcom USB-core driver (BCMA bus glue)
++ *
++ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Based on ssb-ohci driver
++ * Copyright 2007 Michael Buesch <m@bues.ch>
++ *
++ * Derived from the OHCI-PCI driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Derived from the USBcore related parts of Broadcom-SB
++ * Copyright 2005-2011 Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/bcma/bcma.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++
++MODULE_AUTHOR("Hauke Mehrtens");
++MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
++MODULE_LICENSE("GPL");
++
++struct bcma_hcd_device {
++ struct platform_device *ehci_dev;
++ struct platform_device *ohci_dev;
++};
++
++static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
++{
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++ /* Work around for 4716 failures. */
++ if (dev->bus->chipinfo.id == 0x4716) {
++ u32 tmp;
++
++ tmp = bcma_cpu_clock(&dev->bus->drv_mips);
++ if (tmp >= 480000000)
++ tmp = 0x1846b; /* set CDR to 0x11(fast) */
++ else if (tmp == 453000000)
++ tmp = 0x1046b; /* set CDR to 0x10(slow) */
++ else
++ tmp = 0;
++
++ /* Change Shim mdio control reg to fix host not acking at
++ * high frequencies
++ */
++ if (tmp) {
++ bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
++ udelay(500);
++
++ bcma_write32(dev, 0x524, tmp);
++ udelay(500);
++ bcma_write32(dev, 0x524, 0x4ab);
++ udelay(500);
++ bcma_read32(dev, 0x528);
++ bcma_write32(dev, 0x528, 0x80000000);
++ }
++ }
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
++}
++
++/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
++static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
++{
++ u32 tmp;
++
++ /*
++ * USB 2.0 special considerations:
++ *
++ * 1. Since the core supports both OHCI and EHCI functions, it must
++ * only be reset once.
++ *
++ * 2. In addition to the standard SI reset sequence, the Host Control
++ * Register must be programmed to bring the USB core and various
++ * phy components out of reset.
++ */
++ if (!bcma_core_is_enabled(dev)) {
++ bcma_core_enable(dev, 0);
++ mdelay(10);
++ if (dev->id.rev >= 5) {
++ /* Enable Misc PLL */
++ tmp = bcma_read32(dev, 0x1e0);
++ tmp |= 0x100;
++ bcma_write32(dev, 0x1e0, tmp);
++ if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100, 1))
++ printk(KERN_EMERG "Failed to enable misc PPL!\n");
++
++ /* Take out of resets */
++ bcma_write32(dev, 0x200, 0x4ff);
++ udelay(25);
++ bcma_write32(dev, 0x200, 0x6ff);
++ udelay(25);
++
++ /* Make sure digital and AFE are locked in USB PHY */
++ bcma_write32(dev, 0x524, 0x6b);
++ udelay(50);
++ tmp = bcma_read32(dev, 0x524);
++ udelay(50);
++ bcma_write32(dev, 0x524, 0xab);
++ udelay(50);
++ tmp = bcma_read32(dev, 0x524);
++ udelay(50);
++ bcma_write32(dev, 0x524, 0x2b);
++ udelay(50);
++ tmp = bcma_read32(dev, 0x524);
++ udelay(50);
++ bcma_write32(dev, 0x524, 0x10ab);
++ udelay(50);
++ tmp = bcma_read32(dev, 0x524);
++
++ if (bcma_wait_bits(dev, 0x528, 0xc000, 10000, 1)) {
++ tmp = bcma_read32(dev, 0x528);
++ printk(KERN_EMERG
++ "USB20H mdio_rddata 0x%08x\n", tmp);
++ }
++ bcma_write32(dev, 0x528, 0x80000000);
++ tmp = bcma_read32(dev, 0x314);
++ udelay(265);
++ bcma_write32(dev, 0x200, 0x7ff);
++ udelay(10);
++
++ /* Take USB and HSIC out of non-driving modes */
++ bcma_write32(dev, 0x510, 0);
++ } else {
++ bcma_write32(dev, 0x200, 0x7ff);
++
++ udelay(1);
++ }
++
++ bcma_hcd_4716wa(dev);
++ }
++}
++
++static struct platform_device * __devinit
++bcma_hcd_create_pdev(struct bcma_device *dev, char *name, u32 addr)
++{
++ struct platform_device *hci_dev;
++ struct resource hci_res[2];
++ int ret = -ENOMEM;
++
++ memset(hci_res, 0, sizeof(hci_res));
++
++ hci_res[0].start = addr;
++ hci_res[0].end = hci_res[0].start + 0x1000 - 1;
++ hci_res[0].flags = IORESOURCE_MEM;
++
++ hci_res[1].start = dev->irq;
++ hci_res[1].flags = IORESOURCE_IRQ;
++
++ hci_dev = platform_device_alloc(name, 0);
++ if (!hci_dev)
++ goto err_alloc;
++
++ hci_dev->dev.parent = &dev->dev;
++ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
++
++ ret = platform_device_add_resources(hci_dev, hci_res,
++ ARRAY_SIZE(hci_res));
++ if (ret)
++ goto err_alloc;
++
++ ret = platform_device_add(hci_dev);
++ if (ret) {
++err_alloc:
++ platform_device_put(hci_dev);
++ return ERR_PTR(ret);
++ }
++
++ return hci_dev;
++}
++
++static int __devinit bcma_hcd_probe(struct bcma_device *dev)
++{
++ int err;
++ u16 chipid_top;
++ u32 ohci_addr;
++ struct bcma_hcd_device *usb_dev;
++ struct bcma_chipinfo *chipinfo;
++
++ chipinfo = &dev->bus->chipinfo;
++ /* USBcores are only connected on embedded devices. */
++ chipid_top = (chipinfo->id & 0xFF00);
++ if (chipid_top != 0x4700 && chipid_top != 0x5300)
++ return -ENODEV;
++
++ /* TODO: Probably need checks here; is the core connected? */
++
++ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
++ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
++ return -EOPNOTSUPP;
++
++ usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
++ if (!usb_dev)
++ return -ENOMEM;
++
++ bcma_hcd_init_chip(dev);
++
++ /* In AI chips EHCI is addrspace 0, OHCI is 1 */
++ ohci_addr = dev->addr1;
++ if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
++ && chipinfo->rev == 0)
++ ohci_addr = 0x18009000;
++
++ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
++ ohci_addr);
++ if (IS_ERR(usb_dev->ohci_dev)) {
++ err = PTR_ERR(usb_dev->ohci_dev);
++ goto err_free_usb_dev;
++ }
++
++ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
++ dev->addr);
++ if (IS_ERR(usb_dev->ehci_dev)) {
++ err = PTR_ERR(usb_dev->ehci_dev);
++ goto err_unregister_ohci_dev;
++ }
++
++ bcma_set_drvdata(dev, usb_dev);
++ return 0;
++
++err_unregister_ohci_dev:
++ platform_device_unregister(usb_dev->ohci_dev);
++err_free_usb_dev:
++ kfree(usb_dev);
++ return err;
++}
++
++static void __devexit bcma_hcd_remove(struct bcma_device *dev)
++{
++ struct bcma_hcd_device *usb_dev;
++ struct platform_device *ohci_dev;
++ struct platform_device *ehci_dev;
++
++ usb_dev = bcma_get_drvdata(dev);
++ if (!usb_dev)
++ return;
++
++ ohci_dev = usb_dev->ohci_dev;
++ ehci_dev = usb_dev->ehci_dev;
++
++ if (ohci_dev) {
++ platform_device_unregister(ohci_dev);
++ }
++ if (ehci_dev) {
++ platform_device_unregister(ehci_dev);
++ }
++
++ bcma_core_disable(dev, 0);
++}
++
++static void bcma_hcd_shutdown(struct bcma_device *dev)
++{
++ bcma_core_disable(dev, 0);
++}
++
++#ifdef CONFIG_PM
++
++static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state)
++{
++ bcma_core_disable(dev, 0);
++
++ return 0;
++}
++
++static int bcma_hcd_resume(struct bcma_device *dev)
++{
++ bcma_core_enable(dev, 0);
++
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define bcma_hcd_suspend NULL
++#define bcma_hcd_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
++ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
++ BCMA_CORETABLE_END
++};
++MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
++
++static struct bcma_driver bcma_hcd_driver = {
++ .name = KBUILD_MODNAME,
++ .id_table = bcma_hcd_table,
++ .probe = bcma_hcd_probe,
++ .remove = __devexit_p(bcma_hcd_remove),
++ .shutdown = bcma_hcd_shutdown,
++ .suspend = bcma_hcd_suspend,
++ .resume = bcma_hcd_resume,
++};
++
++static int __init bcma_hcd_init(void)
++{
++ return bcma_driver_register(&bcma_hcd_driver);
++}
++module_init(bcma_hcd_init);
++
++static void __exit bcma_hcd_exit(void)
++{
++ bcma_driver_unregister(&bcma_hcd_driver);
++}
++module_exit(bcma_hcd_exit);
diff --git a/target/linux/brcm47xx/patches-3.2/0033-USB-Add-driver-for-the-ssb-bus.patch b/target/linux/brcm47xx/patches-3.2/0033-USB-Add-driver-for-the-ssb-bus.patch
new file mode 100644
index 0000000000..f03657d126
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0033-USB-Add-driver-for-the-ssb-bus.patch
@@ -0,0 +1,325 @@
+From ca1db834336ac19edc7a5d342f8acece1ae1feb9 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:35:17 +0100
+Subject: [PATCH 20/30] USB: Add driver for the ssb bus
+
+This adds a USB driver using the generic platform device driver for the
+USB controller found on the Broadcom ssb bus. The ssb bus just
+exposes one device which serves the OHCI and the EHCI controller at the
+same time. This driver probes for this USB controller and creates and
+registers two new platform devices which will be probed by the new
+generic platform device driver. This makes it possible to use the EHCI
+and the OCHI controller on the ssb bus at the same time.
+
+The old ssb OHCI USB driver will be removed in the next step as this
+driver also provide an OHCI driver and an EHCI for the cores supporting
+it.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 12 ++
+ drivers/usb/host/Makefile | 1 +
+ drivers/usb/host/ssb-hcd.c | 272 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 285 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/ssb-hcd.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -630,3 +630,15 @@ config USB_HCD_BCMA
+ for ehci and ohci.
+
+ If unsure, say N.
++
++config USB_HCD_SSB
++ tristate "SSB usb host driver"
++ depends on SSB && EXPERIMENTAL
++ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
++ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
++ help
++ Enbale support for the EHCI and OCHI host controller on an bcma bus.
++ It converts the bcma driver into two platform device drivers
++ for ehci and ohci.
++
++ If unsure, say N.
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -38,3 +38,4 @@ obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-m
+ obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+ obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
+ obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
++obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
+--- /dev/null
++++ b/drivers/usb/host/ssb-hcd.c
+@@ -0,0 +1,272 @@
++/*
++ * Sonics Silicon Backplane
++ * Broadcom USB-core driver (SSB bus glue)
++ *
++ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Based on ssb-ohci driver
++ * Copyright 2007 Michael Buesch <m@bues.ch>
++ *
++ * Derived from the OHCI-PCI driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Derived from the USBcore related parts of Broadcom-SB
++ * Copyright 2005-2011 Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/ssb/ssb.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++
++MODULE_AUTHOR("Hauke Mehrtens");
++MODULE_DESCRIPTION("Common USB driver for SSB Bus");
++MODULE_LICENSE("GPL");
++
++#define SSB_HCD_TMSLOW_HOSTMODE (1 << 29)
++
++struct ssb_hcd_device {
++ struct platform_device *ehci_dev;
++ struct platform_device *ohci_dev;
++
++ u32 enable_flags;
++};
++
++static void __devinit ssb_hcd_5354wa(struct ssb_device *dev)
++{
++#ifdef CONFIG_SSB_DRIVER_MIPS
++ /* Work around for 5354 failures */
++ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
++ /* Change syn01 reg */
++ ssb_write32(dev, 0x894, 0x00fe00fe);
++
++ /* Change syn03 reg */
++ ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1);
++ }
++#endif
++}
++
++static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev)
++{
++ if (dev->id.coreid == SSB_DEV_USB20_HOST) {
++ /*
++ * USB 2.0 special considerations:
++ *
++ * In addition to the standard SSB reset sequence, the Host
++ * Control Register must be programmed to bring the USB core
++ * and various phy components out of reset.
++ */
++ ssb_write32(dev, 0x200, 0x7ff);
++
++ /* Change Flush control reg */
++ ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8);
++ ssb_read32(dev, 0x400);
++
++ /* Change Shim control reg */
++ ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100);
++ ssb_read32(dev, 0x304);
++
++ udelay(1);
++
++ ssb_hcd_5354wa(dev);
++ }
++}
++
++/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
++static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev)
++{
++ u32 flags = 0;
++
++ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
++ /* Put the device into host-mode. */
++ flags |= SSB_HCD_TMSLOW_HOSTMODE;
++
++ ssb_device_enable(dev, flags);
++
++ ssb_hcd_usb20wa(dev);
++
++ return flags;
++}
++
++static struct platform_device * __devinit
++ssb_hcd_create_pdev(struct ssb_device *dev, char *name, u32 addr, u32 len)
++{
++ struct platform_device *hci_dev;
++ struct resource hci_res[2];
++ int ret = -ENOMEM;
++
++ memset(hci_res, 0, sizeof(hci_res));
++
++ hci_res[0].start = addr;
++ hci_res[0].end = hci_res[0].start + len - 1;
++ hci_res[0].flags = IORESOURCE_MEM;
++
++ hci_res[1].start = dev->irq;
++ hci_res[1].flags = IORESOURCE_IRQ;
++
++ hci_dev = platform_device_alloc(name, 0);
++ if (!hci_dev)
++ goto err_alloc;
++
++ hci_dev->dev.parent = dev->dev;
++ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
++
++ ret = platform_device_add_resources(hci_dev, hci_res, 2);
++ if (ret)
++ goto err_alloc;
++
++ ret = platform_device_add(hci_dev);
++ if (ret) {
++err_alloc:
++ platform_device_put(hci_dev);
++ return ERR_PTR(ret);
++ }
++
++ return hci_dev;
++}
++
++static int __devinit ssb_hcd_probe(struct ssb_device *dev,
++ const struct ssb_device_id *id)
++{
++ int err, tmp;
++ int start, len;
++ u16 chipid_top;
++ struct ssb_hcd_device *usb_dev;
++
++ /* USBcores are only connected on embedded devices. */
++ chipid_top = (dev->bus->chip_id & 0xFF00);
++ if (chipid_top != 0x4700 && chipid_top != 0x5300)
++ return -ENODEV;
++
++ /* TODO: Probably need checks here; is the core connected? */
++
++ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
++ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
++ return -EOPNOTSUPP;
++
++ usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL);
++ if (!usb_dev)
++ return -ENOMEM;
++
++ /* We currently always attach SSB_DEV_USB11_HOSTDEV
++ * as HOST OHCI. If we want to attach it as Client device,
++ * we must branch here and call into the (yet to
++ * be written) Client mode driver. Same for remove(). */
++ usb_dev->enable_flags = ssb_hcd_init_chip(dev);
++
++ tmp = ssb_read32(dev, SSB_ADMATCH0);
++
++ start = ssb_admatch_base(tmp);
++ len = ssb_admatch_size(tmp);
++ usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, "ohci-platform", start,
++ len);
++ if (IS_ERR(usb_dev->ohci_dev)) {
++ err = PTR_ERR(usb_dev->ohci_dev);
++ goto err_free_usb_dev;
++ }
++
++ if (dev->id.coreid == SSB_DEV_USB20_HOST) {
++ start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
++ len = 0x100; /* ehci reg block size */
++ usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, "ehci-platform",
++ start, len);
++ if (IS_ERR(usb_dev->ehci_dev)) {
++ err = PTR_ERR(usb_dev->ehci_dev);
++ goto err_unregister_ohci_dev;
++ }
++ }
++
++ ssb_set_drvdata(dev, usb_dev);
++ return 0;
++
++err_unregister_ohci_dev:
++ platform_device_unregister(usb_dev->ohci_dev);
++err_free_usb_dev:
++ kfree(usb_dev);
++ return err;
++}
++
++static void __devexit ssb_hcd_remove(struct ssb_device *dev)
++{
++ struct ssb_hcd_device *usb_dev;
++ struct platform_device *ohci_dev;
++ struct platform_device *ehci_dev;
++
++ usb_dev = ssb_get_drvdata(dev);
++ if (!usb_dev)
++ return;
++
++ ohci_dev = usb_dev->ohci_dev;
++ ehci_dev = usb_dev->ehci_dev;
++
++ if (ohci_dev) {
++ platform_device_unregister(ohci_dev);
++ }
++ if (ehci_dev) {
++ platform_device_unregister(ehci_dev);
++ }
++
++ ssb_device_disable(dev, 0);
++}
++
++static void __devexit ssb_hcd_shutdown(struct ssb_device *dev)
++{
++ ssb_device_disable(dev, 0);
++}
++
++#ifdef CONFIG_PM
++
++static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state)
++{
++ ssb_device_disable(dev, 0);
++
++ return 0;
++}
++
++static int ssb_hcd_resume(struct ssb_device *dev)
++{
++ struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
++
++ ssb_device_enable(dev, usb_dev->enable_flags);
++
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define ssb_hcd_suspend NULL
++#define ssb_hcd_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct ssb_device_id ssb_hcd_table[] __devinitconst = {
++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
++ SSB_DEVTABLE_END
++};
++MODULE_DEVICE_TABLE(ssb, ssb_hcd_table);
++
++static struct ssb_driver ssb_hcd_driver = {
++ .name = KBUILD_MODNAME,
++ .id_table = ssb_hcd_table,
++ .probe = ssb_hcd_probe,
++ .remove = __devexit_p(ssb_hcd_remove),
++ .shutdown = ssb_hcd_shutdown,
++ .suspend = ssb_hcd_suspend,
++ .resume = ssb_hcd_resume,
++};
++
++static int __init ssb_hcd_init(void)
++{
++ return ssb_driver_register(&ssb_hcd_driver);
++}
++module_init(ssb_hcd_init);
++
++static void __exit ssb_hcd_exit(void)
++{
++ ssb_driver_unregister(&ssb_hcd_driver);
++}
++module_exit(ssb_hcd_exit);
diff --git a/target/linux/brcm47xx/patches-3.2/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch b/target/linux/brcm47xx/patches-3.2/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch
new file mode 100644
index 0000000000..2e859f1f47
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch
@@ -0,0 +1,357 @@
+From 77190e21ed262397eb924e6d48e12ecf3e9f6316 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:36:50 +0100
+Subject: [PATCH 21/30] USB: OHCI: remove old SSB OHCI driver
+
+This is now replaced by the new ssb USB driver, which also supports
+devices with an EHCI controller.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 13 --
+ drivers/usb/host/ohci-hcd.c | 19 ---
+ drivers/usb/host/ohci-ssb.c | 260 -------------------------------------------
+ 3 files changed, 0 insertions(+), 292 deletions(-)
+ delete mode 100644 drivers/usb/host/ohci-ssb.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -351,19 +351,6 @@ config USB_OHCI_HCD_PCI
+ Enables support for PCI-bus plug-in USB controller cards.
+ If unsure, say Y.
+
+-config USB_OHCI_HCD_SSB
+- bool "OHCI support for Broadcom SSB OHCI core"
+- depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
+- default n
+- ---help---
+- Support for the Sonics Silicon Backplane (SSB) attached
+- Broadcom USB OHCI core.
+-
+- This device is present in some embedded devices with
+- Broadcom based SSB bus.
+-
+- If unsure, say N.
+-
+ config USB_OHCI_SH
+ bool "OHCI support for SuperH USB controller"
+ depends on USB_OHCI_HCD && SUPERH
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1076,11 +1076,6 @@ MODULE_LICENSE ("GPL");
+ #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
+ #endif
+
+-#ifdef CONFIG_USB_OHCI_HCD_SSB
+-#include "ohci-ssb.c"
+-#define SSB_OHCI_DRIVER ssb_ohci_driver
+-#endif
+-
+ #ifdef CONFIG_MFD_SM501
+ #include "ohci-sm501.c"
+ #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
+@@ -1130,7 +1125,6 @@ MODULE_LICENSE ("GPL");
+ !defined(PS3_SYSTEM_BUS_DRIVER) && \
+ !defined(SM501_OHCI_DRIVER) && \
+ !defined(TMIO_OHCI_DRIVER) && \
+- !defined(SSB_OHCI_DRIVER) && \
+ !defined(PLATFORM_OHCI_DRIVER)
+ #error "missing bus glue for ohci-hcd"
+ #endif
+@@ -1197,12 +1191,6 @@ static int __init ohci_hcd_mod_init(void
+ goto error_pci;
+ #endif
+
+-#ifdef SSB_OHCI_DRIVER
+- retval = ssb_driver_register(&SSB_OHCI_DRIVER);
+- if (retval)
+- goto error_ssb;
+-#endif
+-
+ #ifdef SM501_OHCI_DRIVER
+ retval = platform_driver_register(&SM501_OHCI_DRIVER);
+ if (retval < 0)
+@@ -1236,10 +1224,6 @@ static int __init ohci_hcd_mod_init(void
+ platform_driver_unregister(&SM501_OHCI_DRIVER);
+ error_sm501:
+ #endif
+-#ifdef SSB_OHCI_DRIVER
+- ssb_driver_unregister(&SSB_OHCI_DRIVER);
+- error_ssb:
+-#endif
+ #ifdef PCI_DRIVER
+ pci_unregister_driver(&PCI_DRIVER);
+ error_pci:
+@@ -1290,9 +1274,6 @@ static void __exit ohci_hcd_mod_exit(voi
+ #ifdef SM501_OHCI_DRIVER
+ platform_driver_unregister(&SM501_OHCI_DRIVER);
+ #endif
+-#ifdef SSB_OHCI_DRIVER
+- ssb_driver_unregister(&SSB_OHCI_DRIVER);
+-#endif
+ #ifdef PCI_DRIVER
+ pci_unregister_driver(&PCI_DRIVER);
+ #endif
+--- a/drivers/usb/host/ohci-ssb.c
++++ /dev/null
+@@ -1,260 +0,0 @@
+-/*
+- * Sonics Silicon Backplane
+- * Broadcom USB-core OHCI driver
+- *
+- * Copyright 2007 Michael Buesch <m@bues.ch>
+- *
+- * Derived from the OHCI-PCI driver
+- * Copyright 1999 Roman Weissgaerber
+- * Copyright 2000-2002 David Brownell
+- * Copyright 1999 Linus Torvalds
+- * Copyright 1999 Gregory P. Smith
+- *
+- * Derived from the USBcore related parts of Broadcom-SB
+- * Copyright 2005 Broadcom Corporation
+- *
+- * Licensed under the GNU/GPL. See COPYING for details.
+- */
+-#include <linux/ssb/ssb.h>
+-
+-
+-#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
+-
+-struct ssb_ohci_device {
+- struct ohci_hcd ohci; /* _must_ be at the beginning. */
+-
+- u32 enable_flags;
+-};
+-
+-static inline
+-struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
+-{
+- return (struct ssb_ohci_device *)(hcd->hcd_priv);
+-}
+-
+-
+-static int ssb_ohci_reset(struct usb_hcd *hcd)
+-{
+- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+- struct ohci_hcd *ohci = &ohcidev->ohci;
+- int err;
+-
+- ohci_hcd_init(ohci);
+- err = ohci_init(ohci);
+-
+- return err;
+-}
+-
+-static int ssb_ohci_start(struct usb_hcd *hcd)
+-{
+- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+- struct ohci_hcd *ohci = &ohcidev->ohci;
+- int err;
+-
+- err = ohci_run(ohci);
+- if (err < 0) {
+- ohci_err(ohci, "can't start\n");
+- ohci_stop(hcd);
+- }
+-
+- return err;
+-}
+-
+-static const struct hc_driver ssb_ohci_hc_driver = {
+- .description = "ssb-usb-ohci",
+- .product_desc = "SSB OHCI Controller",
+- .hcd_priv_size = sizeof(struct ssb_ohci_device),
+-
+- .irq = ohci_irq,
+- .flags = HCD_MEMORY | HCD_USB11,
+-
+- .reset = ssb_ohci_reset,
+- .start = ssb_ohci_start,
+- .stop = ohci_stop,
+- .shutdown = ohci_shutdown,
+-
+- .urb_enqueue = ohci_urb_enqueue,
+- .urb_dequeue = ohci_urb_dequeue,
+- .endpoint_disable = ohci_endpoint_disable,
+-
+- .get_frame_number = ohci_get_frame,
+-
+- .hub_status_data = ohci_hub_status_data,
+- .hub_control = ohci_hub_control,
+-#ifdef CONFIG_PM
+- .bus_suspend = ohci_bus_suspend,
+- .bus_resume = ohci_bus_resume,
+-#endif
+-
+- .start_port_reset = ohci_start_port_reset,
+-};
+-
+-static void ssb_ohci_detach(struct ssb_device *dev)
+-{
+- struct usb_hcd *hcd = ssb_get_drvdata(dev);
+-
+- if (hcd->driver->shutdown)
+- hcd->driver->shutdown(hcd);
+- usb_remove_hcd(hcd);
+- iounmap(hcd->regs);
+- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+- usb_put_hcd(hcd);
+- ssb_device_disable(dev, 0);
+-}
+-
+-static int ssb_ohci_attach(struct ssb_device *dev)
+-{
+- struct ssb_ohci_device *ohcidev;
+- struct usb_hcd *hcd;
+- int err = -ENOMEM;
+- u32 tmp, flags = 0;
+-
+- if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+- dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+- return -EOPNOTSUPP;
+-
+- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
+- /* Put the device into host-mode. */
+- flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+- ssb_device_enable(dev, flags);
+- } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
+- /*
+- * USB 2.0 special considerations:
+- *
+- * In addition to the standard SSB reset sequence, the Host
+- * Control Register must be programmed to bring the USB core
+- * and various phy components out of reset.
+- */
+- ssb_device_enable(dev, 0);
+- ssb_write32(dev, 0x200, 0x7ff);
+-
+- /* Change Flush control reg */
+- tmp = ssb_read32(dev, 0x400);
+- tmp &= ~8;
+- ssb_write32(dev, 0x400, tmp);
+- tmp = ssb_read32(dev, 0x400);
+-
+- /* Change Shim control reg */
+- tmp = ssb_read32(dev, 0x304);
+- tmp &= ~0x100;
+- ssb_write32(dev, 0x304, tmp);
+- tmp = ssb_read32(dev, 0x304);
+-
+- udelay(1);
+-
+- /* Work around for 5354 failures */
+- if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+- /* Change syn01 reg */
+- tmp = 0x00fe00fe;
+- ssb_write32(dev, 0x894, tmp);
+-
+- /* Change syn03 reg */
+- tmp = ssb_read32(dev, 0x89c);
+- tmp |= 0x1;
+- ssb_write32(dev, 0x89c, tmp);
+- }
+- } else
+- ssb_device_enable(dev, 0);
+-
+- hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
+- dev_name(dev->dev));
+- if (!hcd)
+- goto err_dev_disable;
+- ohcidev = hcd_to_ssb_ohci(hcd);
+- ohcidev->enable_flags = flags;
+-
+- tmp = ssb_read32(dev, SSB_ADMATCH0);
+- hcd->rsrc_start = ssb_admatch_base(tmp);
+- hcd->rsrc_len = ssb_admatch_size(tmp);
+- hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+- if (!hcd->regs)
+- goto err_put_hcd;
+- err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+- if (err)
+- goto err_iounmap;
+-
+- ssb_set_drvdata(dev, hcd);
+-
+- return err;
+-
+-err_iounmap:
+- iounmap(hcd->regs);
+-err_put_hcd:
+- usb_put_hcd(hcd);
+-err_dev_disable:
+- ssb_device_disable(dev, flags);
+- return err;
+-}
+-
+-static int ssb_ohci_probe(struct ssb_device *dev,
+- const struct ssb_device_id *id)
+-{
+- int err;
+- u16 chipid_top;
+-
+- /* USBcores are only connected on embedded devices. */
+- chipid_top = (dev->bus->chip_id & 0xFF00);
+- if (chipid_top != 0x4700 && chipid_top != 0x5300)
+- return -ENODEV;
+-
+- /* TODO: Probably need checks here; is the core connected? */
+-
+- if (usb_disabled())
+- return -ENODEV;
+-
+- /* We currently always attach SSB_DEV_USB11_HOSTDEV
+- * as HOST OHCI. If we want to attach it as Client device,
+- * we must branch here and call into the (yet to
+- * be written) Client mode driver. Same for remove(). */
+-
+- err = ssb_ohci_attach(dev);
+-
+- return err;
+-}
+-
+-static void ssb_ohci_remove(struct ssb_device *dev)
+-{
+- ssb_ohci_detach(dev);
+-}
+-
+-#ifdef CONFIG_PM
+-
+-static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
+-{
+- ssb_device_disable(dev, 0);
+-
+- return 0;
+-}
+-
+-static int ssb_ohci_resume(struct ssb_device *dev)
+-{
+- struct usb_hcd *hcd = ssb_get_drvdata(dev);
+- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+-
+- ssb_device_enable(dev, ohcidev->enable_flags);
+-
+- ohci_finish_controller_resume(hcd);
+- return 0;
+-}
+-
+-#else /* !CONFIG_PM */
+-#define ssb_ohci_suspend NULL
+-#define ssb_ohci_resume NULL
+-#endif /* CONFIG_PM */
+-
+-static const struct ssb_device_id ssb_ohci_table[] = {
+- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+- SSB_DEVTABLE_END
+-};
+-MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
+-
+-static struct ssb_driver ssb_ohci_driver = {
+- .name = KBUILD_MODNAME,
+- .id_table = ssb_ohci_table,
+- .probe = ssb_ohci_probe,
+- .remove = ssb_ohci_remove,
+- .suspend = ssb_ohci_suspend,
+- .resume = ssb_ohci_resume,
+-};
diff --git a/target/linux/brcm47xx/patches-3.2/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch b/target/linux/brcm47xx/patches-3.2/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
new file mode 100644
index 0000000000..12028c4a4f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
@@ -0,0 +1,69 @@
+From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 14:59:24 +0200
+Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early
+
+Swap the first and second serial if console=ttyS1 was set.
+Set it up and register it for early serial support.
+
+This patch has been in OpenWRT for a long time.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/setup.c | 39 ++++++++++++++++++++++++++++++++++++++-
+ 1 files changed, 38 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -32,6 +32,8 @@
+ #include <linux/ssb/ssb_embedded.h>
+ #include <linux/bcma/bcma_soc.h>
+ #include <linux/platform_device.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -279,6 +281,31 @@ static int bcm47xx_get_invariants(struct
+ return 0;
+ }
+
++#ifdef CONFIG_SERIAL_8250
++static void __init bcm47xx_early_serial_setup(struct ssb_mipscore *mcore)
++{
++ int i;
++
++ for (i = 0; i < mcore->nr_serial_ports; i++) {
++ struct ssb_serial_port *port = &(mcore->serial_ports[i]);
++ struct uart_port s;
++
++ memset(&s, 0, sizeof(s));
++ s.line = i;
++ s.mapbase = (unsigned int) port->regs;
++ s.membase = port->regs;
++ s.irq = port->irq + 2;
++ s.uartclk = port->baud_base;
++ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
++ s.iotype = SERIAL_IO_MEM;
++ s.regshift = port->reg_shift;
++
++ early_serial_setup(&s);
++ }
++ printk(KERN_DEBUG "Serial init done.\n");
++}
++#endif
++
+ static void __init bcm47xx_register_ssb(void)
+ {
+ int err;
+@@ -311,6 +338,10 @@ static void __init bcm47xx_register_ssb(
+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ }
+ }
++
++#ifdef CONFIG_SERIAL_8250
++ bcm47xx_early_serial_setup(mcore);
++#endif
+ }
+ #endif
+
diff --git a/target/linux/brcm47xx/patches-3.2/016-MIPS-BCM47xx-Remove-CFE-console.patch b/target/linux/brcm47xx/patches-3.2/016-MIPS-BCM47xx-Remove-CFE-console.patch
new file mode 100644
index 0000000000..1ae09d86e8
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/016-MIPS-BCM47xx-Remove-CFE-console.patch
@@ -0,0 +1,141 @@
+From 5219981646071abb6731634bf47781a53e248764 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 15:11:26 +0200
+Subject: [PATCH 6/6] MIPS: BCM47xx: Remove CFE console
+
+Do not use the CFE console. It causes hangs on some devices like the
+Buffalo WHR-HP-G54.
+This was reported in https://dev.openwrt.org/ticket/4061 and
+https://forum.openwrt.org/viewtopic.php?id=17063
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/Kconfig | 1 -
+ arch/mips/bcm47xx/prom.c | 82 +++------------------------------------------
+ 2 files changed, 6 insertions(+), 77 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -97,7 +97,6 @@ config BCM47XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select GENERIC_GPIO
+- select SYS_HAS_EARLY_PRINTK
+ select CFE
+ help
+ Support for BCM47XX based boards
+--- a/arch/mips/bcm47xx/prom.c
++++ b/arch/mips/bcm47xx/prom.c
+@@ -31,96 +31,28 @@
+ #include <asm/fw/cfe/cfe_api.h>
+ #include <asm/fw/cfe/cfe_error.h>
+
+-static int cfe_cons_handle;
+-
+ const char *get_system_type(void)
+ {
+ return "Broadcom BCM47XX";
+ }
+
+-void prom_putchar(char c)
+-{
+- while (cfe_write(cfe_cons_handle, &c, 1) == 0)
+- ;
+-}
+-
+-static __init void prom_init_cfe(void)
++static __init int prom_init_cfe(void)
+ {
+ uint32_t cfe_ept;
+ uint32_t cfe_handle;
+ uint32_t cfe_eptseal;
+- int argc = fw_arg0;
+- char **envp = (char **) fw_arg2;
+- int *prom_vec = (int *) fw_arg3;
+-
+- /*
+- * Check if a loader was used; if NOT, the 4 arguments are
+- * what CFE gives us (handle, 0, EPT and EPTSEAL)
+- */
+- if (argc < 0) {
+- cfe_handle = (uint32_t)argc;
+- cfe_ept = (uint32_t)envp;
+- cfe_eptseal = (uint32_t)prom_vec;
+- } else {
+- if ((int)prom_vec < 0) {
+- /*
+- * Old loader; all it gives us is the handle,
+- * so use the "known" entrypoint and assume
+- * the seal.
+- */
+- cfe_handle = (uint32_t)prom_vec;
+- cfe_ept = 0xBFC00500;
+- cfe_eptseal = CFE_EPTSEAL;
+- } else {
+- /*
+- * Newer loaders bundle the handle/ept/eptseal
+- * Note: prom_vec is in the loader's useg
+- * which is still alive in the TLB.
+- */
+- cfe_handle = prom_vec[0];
+- cfe_ept = prom_vec[2];
+- cfe_eptseal = prom_vec[3];
+- }
+- }
++
++ cfe_eptseal = (uint32_t) fw_arg3;
++ cfe_handle = (uint32_t) fw_arg0;
++ cfe_ept = (uint32_t) fw_arg2;
+
+ if (cfe_eptseal != CFE_EPTSEAL) {
+- /* too early for panic to do any good */
+ printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
+- while (1) ;
++ return -1;
+ }
+
+ cfe_init(cfe_handle, cfe_ept);
+-}
+-
+-static __init void prom_init_console(void)
+-{
+- /* Initialize CFE console */
+- cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+-}
+-
+-static __init void prom_init_cmdline(void)
+-{
+- static char buf[COMMAND_LINE_SIZE] __initdata;
+-
+- /* Get the kernel command line from CFE */
+- if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
+- buf[COMMAND_LINE_SIZE - 1] = 0;
+- strcpy(arcs_cmdline, buf);
+- }
+-
+- /* Force a console handover by adding a console= argument if needed,
+- * as CFE is not available anymore later in the boot process. */
+- if ((strstr(arcs_cmdline, "console=")) == NULL) {
+- /* Try to read the default serial port used by CFE */
+- if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
+- || (strncmp("uart", buf, 4)))
+- /* Default to uart0 */
+- strcpy(buf, "uart0");
+-
+- /* Compute the new command line */
+- snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
+- arcs_cmdline, buf[4]);
+- }
++ return 0;
+ }
+
+ static __init void prom_init_mem(void)
+@@ -161,8 +93,6 @@ static __init void prom_init_mem(void)
+ void __init prom_init(void)
+ {
+ prom_init_cfe();
+- prom_init_console();
+- prom_init_cmdline();
+ prom_init_mem();
+ }
+
diff --git a/target/linux/brcm47xx/patches-3.2/019-fix-boot.patch b/target/linux/brcm47xx/patches-3.2/019-fix-boot.patch
new file mode 100644
index 0000000000..dc57933b99
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/019-fix-boot.patch
@@ -0,0 +1,42 @@
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -121,14 +121,6 @@
+ #endif
+ .endm
+
+-#ifndef CONFIG_NO_EXCEPT_FILL
+- /*
+- * Reserved space for exception handlers.
+- * Necessary for machines which link their kernels at KSEG0.
+- */
+- .fill 0x400
+-#endif
+-
+ EXPORT(_stext)
+
+ #ifdef CONFIG_BOOT_RAW
+@@ -141,6 +133,14 @@ FEXPORT(__kernel_entry)
+ j kernel_entry
+ #endif
+
++#ifndef CONFIG_NO_EXCEPT_FILL
++ /*
++ * Reserved space for exception handlers.
++ * Necessary for machines which link their kernels at KSEG0.
++ */
++ .fill 0x400
++#endif
++
+ #ifdef CONFIG_IMAGE_CMDLINE_HACK
+ .ascii "CMDLINE:"
+ EXPORT(__image_cmdline)
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -89,6 +89,7 @@ config ATH79
+
+ config BCM47XX
+ bool "Broadcom BCM47XX based boards"
++ select BOOT_RAW
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
diff --git a/target/linux/brcm47xx/patches-3.2/040-bcm47xx-add-gpio_set_debounce.patch b/target/linux/brcm47xx/patches-3.2/040-bcm47xx-add-gpio_set_debounce.patch
new file mode 100644
index 0000000000..c37bb13d14
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/040-bcm47xx-add-gpio_set_debounce.patch
@@ -0,0 +1,12 @@
+--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
+@@ -151,5 +151,9 @@ static inline int gpio_polarity(unsigned
+ return -EINVAL;
+ }
+
++static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
++{
++ return -ENOSYS;
++}
+
+ #endif /* __BCM47XX_GPIO_H */
diff --git a/target/linux/brcm47xx/patches-3.2/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-3.2/150-cpu_fixes.patch
new file mode 100644
index 0000000000..576f0a7e0e
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/150-cpu_fixes.patch
@@ -0,0 +1,367 @@
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -17,6 +17,20 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsmtregs.h>
+
++#ifdef CONFIG_BCM47XX
++#include <asm/paccess.h>
++#include <linux/ssb/ssb.h>
++#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
++
++#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
++#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
++#else
++#define BCM4710_DUMMY_RREG()
++
++#define BCM4710_FILL_TLB(addr)
++#define BCM4710_PROTECTED_FILL_TLB(addr)
++#endif
++
+ /*
+ * This macro return a properly sign-extended address suitable as base address
+ * for indexed cache operations. Two issues here:
+@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
+ static inline void flush_dcache_line_indexed(unsigned long addr)
+ {
+ __dflush_prologue
++ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, addr);
+ __dflush_epilogue
+ }
+@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
+ static inline void flush_dcache_line(unsigned long addr)
+ {
+ __dflush_prologue
++ BCM4710_DUMMY_RREG();
+ cache_op(Hit_Writeback_Inv_D, addr);
+ __dflush_epilogue
+ }
+@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
+ static inline void invalidate_dcache_line(unsigned long addr)
+ {
+ __dflush_prologue
++ BCM4710_DUMMY_RREG();
+ cache_op(Hit_Invalidate_D, addr);
+ __dflush_epilogue
+ }
+@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
+ */
+ static inline void protected_flush_icache_line(unsigned long addr)
+ {
++ BCM4710_DUMMY_RREG();
+ protected_cache_op(Hit_Invalidate_I, addr);
+ }
+
+@@ -219,6 +237,7 @@ static inline void protected_flush_icach
+ */
+ static inline void protected_writeback_dcache_line(unsigned long addr)
+ {
++ BCM4710_DUMMY_RREG();
+ protected_cache_op(Hit_Writeback_Inv_D, addr);
+ }
+
+@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
+ : "r" (base), \
+ "i" (op));
+
++static inline void blast_dcache(void)
++{
++ unsigned long start = KSEG0;
++ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
++ unsigned long end = (start + dcache_size);
++
++ do {
++ BCM4710_DUMMY_RREG();
++ cache_op(Index_Writeback_Inv_D, start);
++ start += current_cpu_data.dcache.linesz;
++ } while(start < end);
++}
++
++static inline void blast_dcache_page(unsigned long page)
++{
++ unsigned long start = page;
++ unsigned long end = start + PAGE_SIZE;
++
++ BCM4710_FILL_TLB(start);
++ do {
++ BCM4710_DUMMY_RREG();
++ cache_op(Hit_Writeback_Inv_D, start);
++ start += current_cpu_data.dcache.linesz;
++ } while(start < end);
++}
++
++static inline void blast_dcache_page_indexed(unsigned long page)
++{
++ unsigned long start = page;
++ unsigned long end = start + PAGE_SIZE;
++ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
++ unsigned long ws_end = current_cpu_data.dcache.ways <<
++ current_cpu_data.dcache.waybit;
++ unsigned long ws, addr;
++ for (ws = 0; ws < ws_end; ws += ws_inc) {
++ start = page + ws;
++ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
++ BCM4710_DUMMY_RREG();
++ cache_op(Index_Writeback_Inv_D, addr);
++ }
++ }
++}
++
++
+ /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
+-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
++#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
+ static inline void blast_##pfx##cache##lsize(void) \
+ { \
+ unsigned long start = INDEX_BASE; \
+@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
+ \
+ __##pfx##flush_prologue \
+ \
++ war \
+ for (ws = 0; ws < ws_end; ws += ws_inc) \
+ for (addr = start; addr < end; addr += lsize * 32) \
+ cache##lsize##_unroll32(addr|ws, indexop); \
+@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
+ \
+ __##pfx##flush_prologue \
+ \
++ war \
+ do { \
+ cache##lsize##_unroll32(start, hitop); \
+ start += lsize * 32; \
+@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
+ current_cpu_data.desc.waybit; \
+ unsigned long ws, addr; \
+ \
++ war \
++ \
+ __##pfx##flush_prologue \
+ \
+ for (ws = 0; ws < ws_end; ws += ws_inc) \
+@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l
+ __##pfx##flush_epilogue \
+ }
+
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
+-
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
++
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
+
+ /* build blast_xxx_range, protected_blast_xxx_range */
+-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
++#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
+ static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
+ unsigned long end) \
+ { \
+ unsigned long lsize = cpu_##desc##_line_size(); \
+ unsigned long addr = start & ~(lsize - 1); \
+ unsigned long aend = (end - 1) & ~(lsize - 1); \
++ war \
+ \
+ __##pfx##flush_prologue \
+ \
+ while (1) { \
++ war2 \
+ prot##cache_op(hitop, addr); \
+ if (addr == aend) \
+ break; \
+@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca
+ __##pfx##flush_epilogue \
+ }
+
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
+-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
+ /* blast_inv_dcache_range */
+-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
+-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
++__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
+
+ #endif /* _ASM_R4KCACHE_H */
+--- a/arch/mips/include/asm/stackframe.h
++++ b/arch/mips/include/asm/stackframe.h
+@@ -449,6 +449,10 @@
+ .macro RESTORE_SP_AND_RET
+ LONG_L sp, PT_R29(sp)
+ .set mips3
++#ifdef CONFIG_BCM47XX
++ nop
++ nop
++#endif
+ eret
+ .set mips0
+ .endm
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -52,6 +52,10 @@ NESTED(except_vec1_generic, 0, sp)
+ NESTED(except_vec3_generic, 0, sp)
+ .set push
+ .set noat
++#ifdef CONFIG_BCM47XX
++ nop
++ nop
++#endif
+ #if R5432_CP0_INTERRUPT_WAR
+ mfc0 k0, CP0_INDEX
+ #endif
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -35,6 +35,9 @@
+ #include <asm/cacheflush.h> /* for run_uncached() */
+
+
++/* For enabling BCM4710 cache workarounds */
++int bcm4710 = 0;
++
+ /*
+ * Special Variant of smp_call_function for use by cache functions:
+ *
+@@ -111,6 +114,9 @@ static void __cpuinit r4k_blast_dcache_p
+ {
+ unsigned long dc_lsize = cpu_dcache_line_size();
+
++ if (bcm4710)
++ r4k_blast_dcache_page = blast_dcache_page;
++ else
+ if (dc_lsize == 0)
+ r4k_blast_dcache_page = (void *)cache_noop;
+ else if (dc_lsize == 16)
+@@ -127,6 +133,9 @@ static void __cpuinit r4k_blast_dcache_p
+ {
+ unsigned long dc_lsize = cpu_dcache_line_size();
+
++ if (bcm4710)
++ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
++ else
+ if (dc_lsize == 0)
+ r4k_blast_dcache_page_indexed = (void *)cache_noop;
+ else if (dc_lsize == 16)
+@@ -143,6 +152,9 @@ static void __cpuinit r4k_blast_dcache_s
+ {
+ unsigned long dc_lsize = cpu_dcache_line_size();
+
++ if (bcm4710)
++ r4k_blast_dcache = blast_dcache;
++ else
+ if (dc_lsize == 0)
+ r4k_blast_dcache = (void *)cache_noop;
+ else if (dc_lsize == 16)
+@@ -683,6 +695,8 @@ static void local_r4k_flush_cache_sigtra
+ unsigned long addr = (unsigned long) arg;
+
+ R4600_HIT_CACHEOP_WAR_IMPL;
++ BCM4710_PROTECTED_FILL_TLB(addr);
++ BCM4710_PROTECTED_FILL_TLB(addr + 4);
+ if (dc_lsize)
+ protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
+ if (!cpu_icache_snoops_remote_store && scache_size)
+@@ -1346,6 +1360,17 @@ static void __cpuinit coherency_setup(vo
+ * silly idea of putting something else there ...
+ */
+ switch (current_cpu_type()) {
++ case CPU_BMIPS3300:
++ {
++ u32 cm;
++ cm = read_c0_diag();
++ /* Enable icache */
++ cm |= (1 << 31);
++ /* Enable dcache */
++ cm |= (1 << 30);
++ write_c0_diag(cm);
++ }
++ break;
+ case CPU_R4000PC:
+ case CPU_R4000SC:
+ case CPU_R4000MC:
+@@ -1402,6 +1427,15 @@ void __cpuinit r4k_cache_init(void)
+ break;
+ }
+
++ /* Check if special workarounds are required */
++#ifdef CONFIG_BCM47XX
++ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
++ printk("Enabling BCM4710A0 cache workarounds.\n");
++ bcm4710 = 1;
++ } else
++#endif
++ bcm4710 = 0;
++
+ probe_pcache();
+ setup_scache();
+
+@@ -1462,5 +1496,13 @@ void __cpuinit r4k_cache_init(void)
+ #if !defined(CONFIG_MIPS_CMP)
+ local_r4k___flush_cache_all(NULL);
+ #endif
++#ifdef CONFIG_BCM47XX
++ {
++ static void (*_coherency_setup)(void);
++ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
++ _coherency_setup();
++ }
++#else
+ coherency_setup();
++#endif
+ }
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -1264,6 +1264,9 @@ static void __cpuinit build_r4000_tlb_re
+ /* No need for uasm_i_nop */
+ }
+
++#ifdef CONFIG_BCM47XX
++ uasm_i_nop(&p);
++#endif
+ #ifdef CONFIG_64BIT
+ build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
+ #else
+@@ -1794,6 +1797,9 @@ build_r4000_tlbchange_handler_head(u32 *
+ {
+ struct work_registers wr = build_get_work_registers(p);
+
++#ifdef CONFIG_BCM47XX
++ uasm_i_nop(p);
++#endif
+ #ifdef CONFIG_64BIT
+ build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
+ #else
diff --git a/target/linux/brcm47xx/patches-3.2/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-3.2/160-kmap_coherent.patch
new file mode 100644
index 0000000000..9253e915ed
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/160-kmap_coherent.patch
@@ -0,0 +1,77 @@
+--- a/arch/mips/include/asm/cpu-features.h
++++ b/arch/mips/include/asm/cpu-features.h
+@@ -110,6 +110,9 @@
+ #ifndef cpu_has_pindexed_dcache
+ #define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+ #endif
++#ifndef cpu_use_kmap_coherent
++#define cpu_use_kmap_coherent 1
++#endif
+
+ /*
+ * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
+@@ -0,0 +1,13 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
++ */
++#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_use_kmap_coherent 0
++
++#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -507,7 +507,7 @@ static inline void local_r4k_flush_cache
+ */
+ map_coherent = (cpu_has_dc_aliases &&
+ page_mapped(page) && !Page_dcache_dirty(page));
+- if (map_coherent)
++ if (map_coherent && cpu_use_kmap_coherent)
+ vaddr = kmap_coherent(page, addr);
+ else
+ vaddr = kmap_atomic(page, KM_USER0);
+@@ -530,7 +530,7 @@ static inline void local_r4k_flush_cache
+ }
+
+ if (vaddr) {
+- if (map_coherent)
++ if (map_coherent && cpu_use_kmap_coherent)
+ kunmap_coherent();
+ else
+ kunmap_atomic(vaddr, KM_USER0);
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -208,7 +208,7 @@ void copy_user_highpage(struct page *to,
+ void *vfrom, *vto;
+
+ vto = kmap_atomic(to, KM_USER1);
+- if (cpu_has_dc_aliases &&
++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ page_mapped(from) && !Page_dcache_dirty(from)) {
+ vfrom = kmap_coherent(from, vaddr);
+ copy_page(vto, vfrom);
+@@ -230,7 +230,7 @@ void copy_to_user_page(struct vm_area_st
+ struct page *page, unsigned long vaddr, void *dst, const void *src,
+ unsigned long len)
+ {
+- if (cpu_has_dc_aliases &&
++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ page_mapped(page) && !Page_dcache_dirty(page)) {
+ void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+ memcpy(vto, src, len);
+@@ -248,7 +248,7 @@ void copy_from_user_page(struct vm_area_
+ struct page *page, unsigned long vaddr, void *dst, const void *src,
+ unsigned long len)
+ {
+- if (cpu_has_dc_aliases &&
++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ page_mapped(page) && !Page_dcache_dirty(page)) {
+ void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+ memcpy(dst, vfrom, len);
diff --git a/target/linux/brcm47xx/patches-3.2/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-3.2/210-b44_phy_fix.patch
new file mode 100644
index 0000000000..d9cf29f6e5
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/210-b44_phy_fix.patch
@@ -0,0 +1,61 @@
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -410,10 +410,41 @@ static void b44_wap54g10_workaround(stru
+ error:
+ pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
+ }
++
++static inline int startswith (const char *source, const char *cmp)
++{
++ return !strncmp(source,cmp,strlen(cmp));
++}
++
++static inline void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++ char buf[20];
++ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
++ if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0)
++ return;
++ if (simple_strtoul(buf, NULL, 0) == 100) {
++ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++ } else {
++ /* WL-HDD */
++ struct ssb_device *sdev = bp->sdev;
++ if (nvram_getenv("hardware_version", buf, sizeof(buf)) > 0)
++ return;
++ if (startswith(buf, "WL300-")) {
++ if (sdev->bus->sprom.et0phyaddr == 0 &&
++ sdev->bus->sprom.et1phyaddr == 1)
++ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++ }
++ }
++ return;
++}
+ #else
+ static inline void b44_wap54g10_workaround(struct b44 *bp)
+ {
+ }
++
++static inline void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++}
+ #endif
+
+ static int b44_setup_phy(struct b44 *bp)
+@@ -422,6 +453,7 @@ static int b44_setup_phy(struct b44 *bp)
+ int err;
+
+ b44_wap54g10_workaround(bp);
++ b44_bcm47xx_workarounds(bp);
+
+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+ return 0;
+@@ -2088,6 +2120,8 @@ static int __devinit b44_get_invariants(
+ * valid PHY address. */
+ bp->phy_addr &= 0x1F;
+
++ b44_bcm47xx_workarounds(bp);
++
+ memcpy(bp->dev->dev_addr, addr, 6);
+
+ if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
diff --git a/target/linux/brcm47xx/patches-3.2/211-b44_timeout_spam.patch b/target/linux/brcm47xx/patches-3.2/211-b44_timeout_spam.patch
new file mode 100644
index 0000000000..c2eb3ad90b
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/211-b44_timeout_spam.patch
@@ -0,0 +1,15 @@
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -187,10 +187,11 @@ static int b44_wait_bit(struct b44 *bp,
+ udelay(10);
+ }
+ if (i == timeout) {
++#if 0
+ if (net_ratelimit())
+ netdev_err(bp->dev, "BUG! Timeout waiting for bit %08x of register %lx to %s\n",
+ bit, reg, clear ? "clear" : "set");
+-
++#endif
+ return -ENODEV;
+ }
+ return 0;
diff --git a/target/linux/brcm47xx/patches-3.2/220-bcm5354.patch b/target/linux/brcm47xx/patches-3.2/220-bcm5354.patch
new file mode 100644
index 0000000000..84f7d61658
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/220-bcm5354.patch
@@ -0,0 +1,42 @@
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -318,6 +318,8 @@ void ssb_chipco_resume(struct ssb_chipco
+ void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
+ u32 *plltype, u32 *n, u32 *m)
+ {
++ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
++ return;
+ *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
+ *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ switch (*plltype) {
+@@ -341,6 +343,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
+ void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
+ u32 *plltype, u32 *n, u32 *m)
+ {
++ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
++ return;
+ *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
+ *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ switch (*plltype) {
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -241,6 +241,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+
+ if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
+ rate = 200000000;
++ } else if (bus->chip_id == 0x5354) {
++ rate = 240000000;
+ } else {
+ rate = ssb_calc_clock_rate(pll_type, n, m);
+ }
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -1105,6 +1105,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+
+ if (bus->chip_id == 0x5365) {
+ rate = 100000000;
++ } else if (bus->chip_id == 0x5354) {
++ rate = 120000000;
+ } else {
+ rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
+ if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
diff --git a/target/linux/brcm47xx/patches-3.2/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-3.2/280-activate_ssb_support_in_usb.patch
new file mode 100644
index 0000000000..c535c05db5
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/280-activate_ssb_support_in_usb.patch
@@ -0,0 +1,25 @@
+This prevents the options from being delete with make kernel_oldconfig.
+---
+ drivers/ssb/Kconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
+ config BCMA_HOST_SOC
+ bool
+ depends on BCMA_DRIVER_MIPS
++ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
+
+ config BCMA_SFLASH
+ bool
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -147,6 +147,7 @@ config SSB_SFLASH
+ config SSB_EMBEDDED
+ bool
+ depends on SSB_DRIVER_MIPS
++ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
+ default y
+
+ config SSB_DRIVER_EXTIF
diff --git a/target/linux/brcm47xx/patches-3.2/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-3.2/300-fork_cacheflush.patch
new file mode 100644
index 0000000000..686fb1b945
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/300-fork_cacheflush.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/include/asm/cacheflush.h
++++ b/arch/mips/include/asm/cacheflush.h
+@@ -32,7 +32,7 @@
+ extern void (*flush_cache_all)(void);
+ extern void (*__flush_cache_all)(void);
+ extern void (*flush_cache_mm)(struct mm_struct *mm);
+-#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
++#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+ extern void (*flush_cache_range)(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end);
+ extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
diff --git a/target/linux/brcm47xx/patches-3.2/301-kmod-fuse-dcache-bug-r4k.patch b/target/linux/brcm47xx/patches-3.2/301-kmod-fuse-dcache-bug-r4k.patch
new file mode 100644
index 0000000000..bfdcbc7c11
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/301-kmod-fuse-dcache-bug-r4k.patch
@@ -0,0 +1,28 @@
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -373,7 +373,7 @@ static inline void local_r4k___flush_cac
+ }
+ }
+
+-static void r4k___flush_cache_all(void)
++void r4k___flush_cache_all(void)
+ {
+ r4k_on_each_cpu(local_r4k___flush_cache_all, NULL);
+ }
+@@ -537,7 +537,7 @@ static inline void local_r4k_flush_cache
+ }
+ }
+
+-static void r4k_flush_cache_page(struct vm_area_struct *vma,
++void r4k_flush_cache_page(struct vm_area_struct *vma,
+ unsigned long addr, unsigned long pfn)
+ {
+ struct flush_cache_page_args args;
+@@ -1506,3 +1506,7 @@ void __cpuinit r4k_cache_init(void)
+ coherency_setup();
+ #endif
+ }
++
++/* fuse package DCACHE BUG patch exports */
++void (*fuse_flush_cache_all)(void) = r4k___flush_cache_all;
++EXPORT_SYMBOL(fuse_flush_cache_all);
diff --git a/target/linux/brcm47xx/patches-3.2/302-kmod-fuse-dcache-bug-fuse.patch b/target/linux/brcm47xx/patches-3.2/302-kmod-fuse-dcache-bug-fuse.patch
new file mode 100644
index 0000000000..6465e74768
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/302-kmod-fuse-dcache-bug-fuse.patch
@@ -0,0 +1,46 @@
+--- a/fs/fuse/dev.c
++++ b/fs/fuse/dev.c
+@@ -651,11 +651,20 @@ static int fuse_copy_fill(struct fuse_co
+ return lock_request(cs->fc, cs->req);
+ }
+
++#ifdef DCACHE_BUG
++extern void (*fuse_flush_cache_all)(void);
++#endif
++
+ /* Do as much copy to/from userspace buffer as we can */
+ static int fuse_copy_do(struct fuse_copy_state *cs, void **val, unsigned *size)
+ {
+ unsigned ncpy = min(*size, cs->len);
+ if (val) {
++#ifdef DCACHE_BUG
++ // patch from mailing list, it is very important, otherwise,
++ // can't mount, or ls mount point will hang
++ fuse_flush_cache_all();
++#endif
+ if (cs->write)
+ memcpy(cs->buf, *val, ncpy);
+ else
+--- a/fs/fuse/fuse_i.h
++++ b/fs/fuse/fuse_i.h
+@@ -8,6 +8,7 @@
+
+ #ifndef _FS_FUSE_I_H
+ #define _FS_FUSE_I_H
++#define DCACHE_BUG
+
+ #include <linux/fuse.h>
+ #include <linux/fs.h>
+--- a/fs/fuse/inode.c
++++ b/fs/fuse/inode.c
+@@ -1211,6 +1211,10 @@ static int __init fuse_init(void)
+ printk(KERN_INFO "fuse init (API version %i.%i)\n",
+ FUSE_KERNEL_VERSION, FUSE_KERNEL_MINOR_VERSION);
+
++#ifdef DCACHE_BUG
++ printk("fuse init DCACHE_BUG workaround enabled\n");
++#endif
++
+ INIT_LIST_HEAD(&fuse_conn_list);
+ res = fuse_fs_init();
+ if (res)
diff --git a/target/linux/brcm47xx/patches-3.2/310-no_highpage.patch b/target/linux/brcm47xx/patches-3.2/310-no_highpage.patch
new file mode 100644
index 0000000000..2bc05c4562
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/310-no_highpage.patch
@@ -0,0 +1,66 @@
+--- a/arch/mips/include/asm/page.h
++++ b/arch/mips/include/asm/page.h
+@@ -43,6 +43,7 @@
+ #ifndef __ASSEMBLY__
+
+ #include <linux/pfn.h>
++#include <asm/cpu-features.h>
+ #include <asm/io.h>
+
+ extern void build_clear_page(void);
+@@ -78,13 +79,16 @@ static inline void clear_user_page(void
+ flush_data_cache_page((unsigned long)addr);
+ }
+
+-extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+- struct page *to);
+-struct vm_area_struct;
+-extern void copy_user_highpage(struct page *to, struct page *from,
+- unsigned long vaddr, struct vm_area_struct *vma);
++static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
++ struct page *to)
++{
++ extern void (*flush_data_cache_page)(unsigned long addr);
+
+-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
++ copy_page(vto, vfrom);
++ if (!cpu_has_ic_fills_f_dc ||
++ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
++ flush_data_cache_page((unsigned long)vto);
++}
+
+ /*
+ * These are used to make use of C type-checking..
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -202,30 +202,6 @@ void kunmap_coherent(void)
+ preempt_check_resched();
+ }
+
+-void copy_user_highpage(struct page *to, struct page *from,
+- unsigned long vaddr, struct vm_area_struct *vma)
+-{
+- void *vfrom, *vto;
+-
+- vto = kmap_atomic(to, KM_USER1);
+- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+- page_mapped(from) && !Page_dcache_dirty(from)) {
+- vfrom = kmap_coherent(from, vaddr);
+- copy_page(vto, vfrom);
+- kunmap_coherent();
+- } else {
+- vfrom = kmap_atomic(from, KM_USER0);
+- copy_page(vto, vfrom);
+- kunmap_atomic(vfrom, KM_USER0);
+- }
+- if ((!cpu_has_ic_fills_f_dc) ||
+- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+- flush_data_cache_page((unsigned long)vto);
+- kunmap_atomic(vto, KM_USER1);
+- /* Make sure this page is cleared on other CPU's too before using it */
+- smp_wmb();
+-}
+-
+ void copy_to_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr, void *dst, const void *src,
+ unsigned long len)
diff --git a/target/linux/brcm47xx/patches-3.2/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-3.2/400-arch-bcm47xx.patch
new file mode 100644
index 0000000000..5dd7fd771d
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/400-arch-bcm47xx.patch
@@ -0,0 +1,56 @@
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -199,3 +199,30 @@ int nvram_getenv(char *name, char *val,
+ return NVRAM_ERR_ENVNOTFOUND;
+ }
+ EXPORT_SYMBOL(nvram_getenv);
++
++char *nvram_get(const char *name)
++{
++ char *var, *value, *end, *eq;
++
++ if (!name)
++ return NULL;
++
++ if (!nvram_buf[0])
++ early_nvram_init();
++
++ /* Look for name=value and return value */
++ var = &nvram_buf[sizeof(struct nvram_header)];
++ end = nvram_buf + sizeof(nvram_buf) - 2;
++ end[0] = end[1] = '\0';
++ for (; *var; var = value + strlen(value) + 1) {
++ eq = strchr(var, '=');
++ if (!eq)
++ break;
++ value = eq + 1;
++ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
++ return value;
++ }
++
++ return NULL;
++}
++EXPORT_SYMBOL(nvram_get);
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -469,3 +469,20 @@ static int __init bcm47xx_register_flash
+ return -1;
+ }
+ fs_initcall(bcm47xx_register_flash);
++
++static int __init bcm47xx_register_gpiodev(void)
++{
++ static struct resource res = {
++ .start = 0xFFFFFFFF,
++ };
++ struct platform_device *pdev;
++
++ pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
++ if (!pdev) {
++ printk(KERN_ERR "bcm47xx: GPIODEV init failed\n");
++ return -ENODEV;
++ }
++
++ return 0;
++}
++device_initcall(bcm47xx_register_gpiodev);
diff --git a/target/linux/brcm47xx/patches-3.2/601-mips-remove-pci-collision-check.patch b/target/linux/brcm47xx/patches-3.2/601-mips-remove-pci-collision-check.patch
new file mode 100644
index 0000000000..7860ca0dd8
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/601-mips-remove-pci-collision-check.patch
@@ -0,0 +1,18 @@
+--- a/arch/mips/pci/pci.c
++++ b/arch/mips/pci/pci.c
+@@ -185,12 +185,10 @@ static int pcibios_enable_resources(stru
+ if ((idx == PCI_ROM_RESOURCE) &&
+ (!(r->flags & IORESOURCE_ROM_ENABLE)))
+ continue;
+- if (!r->start && r->end) {
+- printk(KERN_ERR "PCI: Device %s not available "
+- "because of resource collisions\n",
++ if (!r->start && r->end)
++ printk(KERN_WARNING "PCI: Device %s resource"
++ "collisions detected. Ignoring...\n",
+ pci_name(dev));
+- return -EINVAL;
+- }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
diff --git a/target/linux/brcm47xx/patches-3.2/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-3.2/610-pci_ide_fix.patch
new file mode 100644
index 0000000000..f254b203bd
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/610-pci_ide_fix.patch
@@ -0,0 +1,14 @@
+--- a/include/linux/ide.h
++++ b/include/linux/ide.h
+@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
+ hw->io_ports.ctl_addr = ctl_addr;
+ }
+
++#if defined CONFIG_BCM47XX
++# define MAX_HWIFS 2
++#else
+ #define MAX_HWIFS 10
++#endif
+
+ /*
+ * Now for the data we need to maintain per-drive: ide_drive_t
diff --git a/target/linux/brcm47xx/patches-3.2/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-3.2/700-ssb-gigabit-ethernet-driver.patch
new file mode 100644
index 0000000000..2cc9f60b80
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/700-ssb-gigabit-ethernet-driver.patch
@@ -0,0 +1,325 @@
+--- a/drivers/net/ethernet/broadcom/tg3.c
++++ b/drivers/net/ethernet/broadcom/tg3.c
+@@ -44,6 +44,7 @@
+ #include <linux/prefetch.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/firmware.h>
++#include <linux/ssb/ssb_driver_gige.h>
+
+ #include <net/checksum.h>
+ #include <net/ip.h>
+@@ -530,7 +531,8 @@ static void _tw32_flush(struct tg3 *tp,
+ static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
+ {
+ tp->write32_mbox(tp, off, val);
+- if (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND))
++ if (tg3_flag(tp, FLUSH_POSTED_WRITES) ||
++ (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND)))
+ tp->read32_mbox(tp, off);
+ }
+
+@@ -540,7 +542,7 @@ static void tg3_write32_tx_mbox(struct t
+ writel(val, mbox);
+ if (tg3_flag(tp, TXD_MBOX_HWBUG))
+ writel(val, mbox);
+- if (tg3_flag(tp, MBOX_WRITE_REORDER))
++ if (tg3_flag(tp, MBOX_WRITE_REORDER) || tg3_flag(tp, FLUSH_POSTED_WRITES))
+ readl(mbox);
+ }
+
+@@ -943,7 +945,7 @@ static void tg3_switch_clocks(struct tg3
+
+ #define PHY_BUSY_LOOPS 5000
+
+-static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
++static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
+ {
+ u32 frame_val;
+ unsigned int loops;
+@@ -957,7 +959,7 @@ static int tg3_readphy(struct tg3 *tp, i
+
+ *val = 0x0;
+
+- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
++ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ MI_COM_PHY_ADDR_MASK);
+ frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
+ MI_COM_REG_ADDR_MASK);
+@@ -992,7 +994,12 @@ static int tg3_readphy(struct tg3 *tp, i
+ return ret;
+ }
+
+-static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
++static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
++{
++ return __tg3_readphy(tp, tp->phy_addr, reg, val);
++}
++
++static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
+ {
+ u32 frame_val;
+ unsigned int loops;
+@@ -1008,7 +1015,7 @@ static int tg3_writephy(struct tg3 *tp,
+ udelay(80);
+ }
+
+- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
++ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ MI_COM_PHY_ADDR_MASK);
+ frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
+ MI_COM_REG_ADDR_MASK);
+@@ -1041,6 +1048,11 @@ static int tg3_writephy(struct tg3 *tp,
+ return ret;
+ }
+
++static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
++{
++ return __tg3_writephy(tp, tp->phy_addr, reg, val);
++}
++
+ static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val)
+ {
+ int err;
+@@ -2963,6 +2975,9 @@ static int tg3_nvram_read(struct tg3 *tp
+ {
+ int ret;
+
++ if (tg3_flag(tp, IS_SSB_CORE))
++ return -ENODEV;
++
+ if (!tg3_flag(tp, NVRAM))
+ return tg3_nvram_read_using_eeprom(tp, offset, val);
+
+@@ -3045,9 +3060,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
+ return -ENODEV;
+ }
+
+- /* Clear firmware's nvram arbitration. */
+- if (tg3_flag(tp, NVRAM))
+- tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
++ if (!tg3_flag(tp, IS_SSB_CORE)) {
++ /* Clear firmware's nvram arbitration. */
++ if (tg3_flag(tp, NVRAM))
++ tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
++ }
++
+ return 0;
+ }
+
+@@ -3166,6 +3184,11 @@ static int tg3_load_tso_firmware(struct
+ unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
+ int err, i;
+
++ if (tg3_flag(tp, IS_SSB_CORE)) {
++ /* We don't use firmware. */
++ return 0;
++ }
++
+ if (tg3_flag(tp, HW_TSO_1) ||
+ tg3_flag(tp, HW_TSO_2) ||
+ tg3_flag(tp, HW_TSO_3))
+@@ -3512,8 +3535,10 @@ static int tg3_power_down_prepare(struct
+ tg3_frob_aux_power(tp, true);
+
+ /* Workaround for unstable PLL clock */
+- if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
+- (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) {
++ if ((tp->phy_id & TG3_PHY_ID_MASK) != TG3_PHY_ID_BCM5750_2 &&
++ /* !!! FIXME !!! */
++ ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
++ (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) {
+ u32 val = tr32(0x7d00);
+
+ val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
+@@ -4041,6 +4066,14 @@ relink:
+ if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
+ tg3_phy_copper_begin(tp);
+
++ if (tg3_flag(tp, ROBOSWITCH)) {
++ current_link_up = 1;
++ current_speed = SPEED_1000; /* FIXME */
++ current_duplex = DUPLEX_FULL;
++ tp->link_config.active_speed = current_speed;
++ tp->link_config.active_duplex = current_duplex;
++ }
++
+ tg3_readphy(tp, MII_BMSR, &bmsr);
+ if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) ||
+ (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
+@@ -7747,6 +7780,11 @@ static int tg3_chip_reset(struct tg3 *tp
+ }
+ }
+
++ if (tg3_flag(tp, IS_SSB_CORE)) {
++ /* We don't use firmware. */
++ return 0;
++ }
++
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ tw32(VCPU_STATUS, tr32(VCPU_STATUS) | VCPU_STATUS_DRV_RESET);
+ tw32(GRC_VCPU_EXT_CTRL,
+@@ -7845,6 +7883,14 @@ static int tg3_chip_reset(struct tg3 *tp
+ tw32(0x5000, 0x400);
+ }
+
++ if (tg3_flag(tp, IS_SSB_CORE)) {
++ /* BCM4785: In order to avoid repercussions from using potentially
++ * defective internal ROM, stop the Rx RISC CPU, which is not
++ * required. */
++ tg3_stop_fw(tp);
++ tg3_halt_cpu(tp, RX_CPU_BASE);
++ }
++
+ tw32(GRC_MODE, tp->grc_mode);
+
+ if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
+@@ -9220,6 +9266,11 @@ static void tg3_timer(unsigned long __op
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
+ tg3_chk_missed_msi(tp);
+
++ if (tg3_flag(tp, FLUSH_POSTED_WRITES)) {
++ /* BCM4785: Flush posted writes from GbE to host memory. */
++ tr32(HOSTCC_MODE);
++ }
++
+ if (!tg3_flag(tp, TAGGED_STATUS)) {
+ /* All of this garbage is because when using non-tagged
+ * IRQ status the mailbox/status_block protocol the chip
+@@ -9509,6 +9560,11 @@ static int tg3_request_firmware(struct t
+ return -ENOENT;
+ }
+
++ if (tg3_flag(tp, IS_SSB_CORE)) {
++ /* We don't use firmware. */
++ return 0;
++ }
++
+ fw_data = (void *)tp->fw->data;
+
+ /* Firmware blob starts with version numbers, followed by
+@@ -10867,6 +10923,11 @@ static int tg3_test_nvram(struct tg3 *tp
+ if (tg3_flag(tp, NO_NVRAM))
+ return 0;
+
++ if (tg3_flag(tp, IS_SSB_CORE)) {
++ /* We don't have NVRAM. */
++ return 0;
++ }
++
+ if (tg3_nvram_read(tp, 0, &magic) != 0)
+ return -EIO;
+
+@@ -11827,7 +11888,7 @@ static int tg3_ioctl(struct net_device *
+ return -EAGAIN;
+
+ spin_lock_bh(&tp->lock);
+- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
++ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
+ spin_unlock_bh(&tp->lock);
+
+ data->val_out = mii_regval;
+@@ -11843,7 +11904,7 @@ static int tg3_ioctl(struct net_device *
+ return -EAGAIN;
+
+ spin_lock_bh(&tp->lock);
+- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
++ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+ spin_unlock_bh(&tp->lock);
+
+ return err;
+@@ -12573,6 +12634,13 @@ static void __devinit tg3_get_5720_nvram
+ /* Chips other than 5700/5701 use the NVRAM for fetching info. */
+ static void __devinit tg3_nvram_init(struct tg3 *tp)
+ {
++ if (tg3_flag(tp, IS_SSB_CORE)) {
++ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
++ tg3_flag_clear(tp, NVRAM);
++ tg3_flag_clear(tp, NVRAM_BUFFERED);
++ return;
++ }
++
+ tw32_f(GRC_EEPROM_ADDR,
+ (EEPROM_ADDR_FSM_RESET |
+ (EEPROM_DEFAULT_CLOCK_PERIOD <<
+@@ -12839,6 +12907,9 @@ static int tg3_nvram_write_block(struct
+ {
+ int ret;
+
++ if (tg3_flag(tp, IS_SSB_CORE))
++ return -ENODEV;
++
+ if (tg3_flag(tp, EEPROM_WRITE_PROT)) {
+ tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
+ ~GRC_LCLCTRL_GPIO_OUTPUT1);
+@@ -14263,6 +14334,11 @@ static int __devinit tg3_get_invariants(
+ }
+ }
+
++ if (tg3_flag(tp, FLUSH_POSTED_WRITES)) {
++ tp->write32_tx_mbox = tg3_write_flush_reg32;
++ tp->write32_rx_mbox = tg3_write_flush_reg32;
++ }
++
+ /* Get eeprom hw config before calling tg3_set_power_state().
+ * In particular, the TG3_FLAG_IS_NIC flag must be
+ * determined before calling tg3_set_power_state() so that
+@@ -14673,6 +14749,8 @@ static int __devinit tg3_get_device_addr
+ }
+
+ if (!is_valid_ether_addr(&dev->dev_addr[0])) {
++ if (tg3_flag(tp, IS_SSB_CORE))
++ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
+ #ifdef CONFIG_SPARC
+ if (!tg3_get_default_macaddr_sparc(tp))
+ return 0;
+@@ -15171,6 +15249,7 @@ static char * __devinit tg3_phy_string(s
+ case TG3_PHY_ID_BCM5704: return "5704";
+ case TG3_PHY_ID_BCM5705: return "5705";
+ case TG3_PHY_ID_BCM5750: return "5750";
++ case TG3_PHY_ID_BCM5750_2: return "5750-2";
+ case TG3_PHY_ID_BCM5752: return "5752";
+ case TG3_PHY_ID_BCM5714: return "5714";
+ case TG3_PHY_ID_BCM5780: return "5780";
+@@ -15366,6 +15445,13 @@ static int __devinit tg3_init_one(struct
+ tp->msg_enable = tg3_debug;
+ else
+ tp->msg_enable = TG3_DEF_MSG_ENABLE;
++ if (pdev_is_ssb_gige_core(pdev)) {
++ tg3_flag_set(tp, IS_SSB_CORE);
++ if (ssb_gige_must_flush_posted_writes(pdev))
++ tg3_flag_set(tp, FLUSH_POSTED_WRITES);
++ if (ssb_gige_have_roboswitch(pdev))
++ tg3_flag_set(tp, ROBOSWITCH);
++ }
+
+ /* The word/byte swap controls here control register access byte
+ * swapping. DMA data byte swapping is controlled in the GRC_MODE
+--- a/drivers/net/ethernet/broadcom/tg3.h
++++ b/drivers/net/ethernet/broadcom/tg3.h
+@@ -2922,6 +2922,9 @@ enum TG3_FLAGS {
+ TG3_FLAG_5717_PLUS,
+ TG3_FLAG_4K_FIFO_LIMIT,
+ TG3_FLAG_RESET_TASK_PENDING,
++ TG3_FLAG_IS_SSB_CORE,
++ TG3_FLAG_FLUSH_POSTED_WRITES,
++ TG3_FLAG_ROBOSWITCH,
+
+ /* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */
+ TG3_FLAG_NUMBER_OF_FLAGS, /* Last entry in enum TG3_FLAGS */
+@@ -3071,6 +3074,7 @@ struct tg3 {
+ #define TG3_PHY_ID_BCM5704 0x60008190
+ #define TG3_PHY_ID_BCM5705 0x600081a0
+ #define TG3_PHY_ID_BCM5750 0x60008180
++#define TG3_PHY_ID_BCM5750_2 0xbc050cd0
+ #define TG3_PHY_ID_BCM5752 0x60008100
+ #define TG3_PHY_ID_BCM5714 0x60008340
+ #define TG3_PHY_ID_BCM5780 0x60008350
+@@ -3108,7 +3112,7 @@ struct tg3 {
+ (X) == TG3_PHY_ID_BCM5906 || (X) == TG3_PHY_ID_BCM5761 || \
+ (X) == TG3_PHY_ID_BCM5718C || (X) == TG3_PHY_ID_BCM5718S || \
+ (X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM5719C || \
+- (X) == TG3_PHY_ID_BCM8002)
++ (X) == TG3_PHY_ID_BCM8002 || (X) == TG3_PHY_ID_BCM5750_2)
+
+ u32 phy_flags;
+ #define TG3_PHYFLG_IS_LOW_POWER 0x00000001
diff --git a/target/linux/brcm47xx/patches-3.2/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-3.2/812-disable_wgt634u_crap.patch
new file mode 100644
index 0000000000..6bc34549fe
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/812-disable_wgt634u_crap.patch
@@ -0,0 +1,180 @@
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -4,4 +4,3 @@
+ #
+
+ obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o
+-obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
+--- a/arch/mips/bcm47xx/wgt634u.c
++++ /dev/null
+@@ -1,170 +0,0 @@
+-/*
+- * This file is subject to the terms and conditions of the GNU General Public
+- * License. See the file "COPYING" in the main directory of this archive
+- * for more details.
+- *
+- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+- */
+-
+-#include <linux/platform_device.h>
+-#include <linux/module.h>
+-#include <linux/leds.h>
+-#include <linux/mtd/physmap.h>
+-#include <linux/ssb/ssb.h>
+-#include <linux/interrupt.h>
+-#include <linux/reboot.h>
+-#include <linux/gpio.h>
+-#include <asm/mach-bcm47xx/bcm47xx.h>
+-
+-/* GPIO definitions for the WGT634U */
+-#define WGT634U_GPIO_LED 3
+-#define WGT634U_GPIO_RESET 2
+-#define WGT634U_GPIO_TP1 7
+-#define WGT634U_GPIO_TP2 6
+-#define WGT634U_GPIO_TP3 5
+-#define WGT634U_GPIO_TP4 4
+-#define WGT634U_GPIO_TP5 1
+-
+-static struct gpio_led wgt634u_leds[] = {
+- {
+- .name = "power",
+- .gpio = WGT634U_GPIO_LED,
+- .active_low = 1,
+- .default_trigger = "heartbeat",
+- },
+-};
+-
+-static struct gpio_led_platform_data wgt634u_led_data = {
+- .num_leds = ARRAY_SIZE(wgt634u_leds),
+- .leds = wgt634u_leds,
+-};
+-
+-static struct platform_device wgt634u_gpio_leds = {
+- .name = "leds-gpio",
+- .id = -1,
+- .dev = {
+- .platform_data = &wgt634u_led_data,
+- }
+-};
+-
+-
+-/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
+- firmware. */
+-static struct mtd_partition wgt634u_partitions[] = {
+- {
+- .name = "cfe",
+- .offset = 0,
+- .size = 0x60000, /* 384k */
+- .mask_flags = MTD_WRITEABLE /* force read-only */
+- },
+- {
+- .name = "config",
+- .offset = 0x60000,
+- .size = 0x20000 /* 128k */
+- },
+- {
+- .name = "linux",
+- .offset = 0x80000,
+- .size = 0x140000 /* 1280k */
+- },
+- {
+- .name = "jffs",
+- .offset = 0x1c0000,
+- .size = 0x620000 /* 6272k */
+- },
+- {
+- .name = "nvram",
+- .offset = 0x7e0000,
+- .size = 0x20000 /* 128k */
+- },
+-};
+-
+-static struct physmap_flash_data wgt634u_flash_data = {
+- .parts = wgt634u_partitions,
+- .nr_parts = ARRAY_SIZE(wgt634u_partitions)
+-};
+-
+-static struct resource wgt634u_flash_resource = {
+- .flags = IORESOURCE_MEM,
+-};
+-
+-static struct platform_device wgt634u_flash = {
+- .name = "physmap-flash",
+- .id = 0,
+- .dev = { .platform_data = &wgt634u_flash_data, },
+- .resource = &wgt634u_flash_resource,
+- .num_resources = 1,
+-};
+-
+-/* Platform devices */
+-static struct platform_device *wgt634u_devices[] __initdata = {
+- &wgt634u_flash,
+- &wgt634u_gpio_leds,
+-};
+-
+-static irqreturn_t gpio_interrupt(int irq, void *ignored)
+-{
+- int state;
+-
+- /* Interrupts are shared, check if the current one is
+- a GPIO interrupt. */
+- if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
+- SSB_CHIPCO_IRQ_GPIO))
+- return IRQ_NONE;
+-
+- state = gpio_get_value(WGT634U_GPIO_RESET);
+-
+- /* Interrupt are level triggered, revert the interrupt polarity
+- to clear the interrupt. */
+- gpio_polarity(WGT634U_GPIO_RESET, state);
+-
+- if (!state) {
+- printk(KERN_INFO "Reset button pressed");
+- ctrl_alt_del();
+- }
+-
+- return IRQ_HANDLED;
+-}
+-
+-static int __init wgt634u_init(void)
+-{
+- /* There is no easy way to detect that we are running on a WGT634U
+- * machine. Use the MAC address as an heuristic. Netgear Inc. has
+- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
+- */
+- u8 *et0mac;
+-
+- if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
+- return -ENODEV;
+-
+- et0mac = bcm47xx_bus.ssb.sprom.et0mac;
+-
+- if (et0mac[0] == 0x00 &&
+- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
+- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
+- struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
+-
+- printk(KERN_INFO "WGT634U machine detected.\n");
+-
+- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
+- gpio_interrupt, IRQF_SHARED,
+- "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
+- gpio_direction_input(WGT634U_GPIO_RESET);
+- gpio_intmask(WGT634U_GPIO_RESET, 1);
+- ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
+- SSB_CHIPCO_IRQ_GPIO,
+- SSB_CHIPCO_IRQ_GPIO);
+- }
+-
+- wgt634u_flash_data.width = mcore->pflash.buswidth;
+- wgt634u_flash_resource.start = mcore->pflash.window;
+- wgt634u_flash_resource.end = mcore->pflash.window
+- + mcore->pflash.window_size
+- - 1;
+- return platform_add_devices(wgt634u_devices,
+- ARRAY_SIZE(wgt634u_devices));
+- } else
+- return -ENODEV;
+-}
+-
+-module_init(wgt634u_init);
diff --git a/target/linux/brcm47xx/patches-3.2/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-3.2/820-wgt634u-nvram-fix.patch
new file mode 100644
index 0000000000..88a40e2bc3
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/820-wgt634u-nvram-fix.patch
@@ -0,0 +1,305 @@
+The Netgear wgt634u uses a different format for storing the
+configuration. This patch is needed to read out the correct
+configuration. The cfe_env.c file uses a different method way to read
+out the configuration than the in kernel cfe config reader.
+
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -3,4 +3,4 @@
+ # under Linux.
+ #
+
+-obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o
++obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o cfe_env.o
+--- /dev/null
++++ b/arch/mips/bcm47xx/cfe_env.c
+@@ -0,0 +1,229 @@
++/*
++ * CFE environment variable access
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++
++#define NVRAM_SIZE (0x1ff0)
++static char _nvdata[NVRAM_SIZE];
++static char _valuestr[256];
++
++/*
++ * TLV types. These codes are used in the "type-length-value"
++ * encoding of the items stored in the NVRAM device (flash or EEPROM)
++ *
++ * The layout of the flash/nvram is as follows:
++ *
++ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
++ *
++ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
++ * The "length" field marks the length of the data section, not
++ * including the type and length fields.
++ *
++ * Environment variables are stored as follows:
++ *
++ * <type_env> <length> <flags> <name> = <value>
++ *
++ * If bit 0 (low bit) is set, the length is an 8-bit value.
++ * If bit 0 (low bit) is clear, the length is a 16-bit value
++ *
++ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
++ * indicates the size of the length field.
++ *
++ * Flags are from the constants below:
++ *
++ */
++#define ENV_LENGTH_16BITS 0x00 /* for low bit */
++#define ENV_LENGTH_8BITS 0x01
++
++#define ENV_TYPE_USER 0x80
++
++#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
++#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
++
++/*
++ * The actual TLV types we support
++ */
++
++#define ENV_TLV_TYPE_END 0x00
++#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
++
++/*
++ * Environment variable flags
++ */
++
++#define ENV_FLG_NORMAL 0x00 /* normal read/write */
++#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
++#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
++
++#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
++#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
++
++
++/* *********************************************************************
++ * _nvram_read(buffer,offset,length)
++ *
++ * Read data from the NVRAM device
++ *
++ * Input parameters:
++ * buffer - destination buffer
++ * offset - offset of data to read
++ * length - number of bytes to read
++ *
++ * Return value:
++ * number of bytes read, or <0 if error occured
++ ********************************************************************* */
++static int
++_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
++{
++ int i;
++ if (offset > NVRAM_SIZE)
++ return -1;
++
++ for ( i = 0; i < length; i++) {
++ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
++ }
++ return length;
++}
++
++
++static char*
++_strnchr(const char *dest,int c,size_t cnt)
++{
++ while (*dest && (cnt > 0)) {
++ if (*dest == c) return (char *) dest;
++ dest++;
++ cnt--;
++ }
++ return NULL;
++}
++
++
++
++/*
++ * Core support API: Externally visible.
++ */
++
++/*
++ * Get the value of an NVRAM variable
++ * @param name name of variable to get
++ * @return value of variable or NULL if undefined
++ */
++
++char*
++cfe_env_get(unsigned char *nv_buf, char* name)
++{
++ int size;
++ unsigned char *buffer;
++ unsigned char *ptr;
++ unsigned char *envval;
++ unsigned int reclen;
++ unsigned int rectype;
++ int offset;
++ int flg;
++
++ if (!strcmp(name, "nvram_type"))
++ return "cfe";
++
++ size = NVRAM_SIZE;
++ buffer = &_nvdata[0];
++
++ ptr = buffer;
++ offset = 0;
++
++ /* Read the record type and length */
++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
++ goto error;
++ }
++
++ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
++
++ /* Adjust pointer for TLV type */
++ rectype = *(ptr);
++ offset++;
++ size--;
++
++ /*
++ * Read the length. It can be either 1 or 2 bytes
++ * depending on the code
++ */
++ if (rectype & ENV_LENGTH_8BITS) {
++ /* Read the record type and length - 8 bits */
++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
++ goto error;
++ }
++ reclen = *(ptr);
++ size--;
++ offset++;
++ }
++ else {
++ /* Read the record type and length - 16 bits, MSB first */
++ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
++ goto error;
++ }
++ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
++ size -= 2;
++ offset += 2;
++ }
++
++ if (reclen > size)
++ break; /* should not happen, bad NVRAM */
++
++ switch (rectype) {
++ case ENV_TLV_TYPE_ENV:
++ /* Read the TLV data */
++ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
++ goto error;
++ flg = *ptr++;
++ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
++ if (envval) {
++ *envval++ = '\0';
++ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
++ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
++#if 0
++ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
++#endif
++ if(!strcmp(ptr, name)){
++ return _valuestr;
++ }
++ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
++ return _valuestr;
++ }
++ break;
++
++ default:
++ /* Unknown TLV type, skip it. */
++ break;
++ }
++
++ /*
++ * Advance to next TLV
++ */
++
++ size -= (int)reclen;
++ offset += reclen;
++
++ /* Read the next record type */
++ ptr = buffer;
++ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
++ goto error;
++ }
++
++error:
++ return NULL;
++
++}
++
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -23,6 +23,8 @@
+ #include <asm/mach-bcm47xx/bus.h>
+
+ static char nvram_buf[NVRAM_SPACE];
++static int cfe_env;
++extern char *cfe_env_get(char *nv_buf, const char *name);
+
+ /* Probe for NVRAM header */
+ static void early_nvram_init_pflash(void)
+@@ -59,6 +61,25 @@ static void early_nvram_init_pflash(void
+ break;
+ #endif
+ }
++ cfe_env = 0;
++
++ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
++ if (lim >= 8 * 1024 * 1024) {
++ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
++ dst = (u32 *) nvram_buf;
++
++ if ((*src & 0xff00ff) == 0x000001) {
++ printk("early_nvram_init: WGT634U NVRAM found.\n");
++
++ for (i = 0; i < 0x1ff0; i++) {
++ if (*src == 0xFFFFFFFF)
++ break;
++ *dst++ = *src++;
++ }
++ cfe_env = 1;
++ return;
++ }
++ }
+
+ off = FLASH_MIN;
+ while (off <= lim) {
+@@ -181,6 +202,12 @@ int nvram_getenv(char *name, char *val,
+ if (!nvram_buf[0])
+ early_nvram_init();
+
++ if (cfe_env) {
++ value = cfe_env_get(nvram_buf, name);
++ snprintf(val, val_len, "%s", value);
++ return 0;
++ }
++
+ /* Look for name=value and return value */
+ var = &nvram_buf[sizeof(struct nvram_header)];
+ end = nvram_buf + sizeof(nvram_buf) - 2;
+@@ -210,6 +237,9 @@ char *nvram_get(const char *name)
+ if (!nvram_buf[0])
+ early_nvram_init();
+
++ if (cfe_env)
++ return cfe_env_get(nvram_buf, name);
++
+ /* Look for name=value and return value */
+ var = &nvram_buf[sizeof(struct nvram_header)];
+ end = nvram_buf + sizeof(nvram_buf) - 2;
diff --git a/target/linux/brcm47xx/patches-3.2/830-tg3_add_pci_ids.patch b/target/linux/brcm47xx/patches-3.2/830-tg3_add_pci_ids.patch
new file mode 100644
index 0000000000..cf266b60bf
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/830-tg3_add_pci_ids.patch
@@ -0,0 +1,47 @@
+commit 812bcf8f47b45a206948008144233bc47d5747ac
+Author: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu Dec 16 20:01:17 2010 +0100
+
+ Revert "tg3: Remove 5720, 5750, and 5750M"
+
+ This reverts commit 67b284d476bcb3d100e946da23d6cf9acfd0465c.
+
+--- a/drivers/net/ethernet/broadcom/tg3.c
++++ b/drivers/net/ethernet/broadcom/tg3.c
+@@ -248,9 +248,12 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_t
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5901_2)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5704S_2)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705F)},
++ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5720)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5721)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5722)},
++ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)},
++ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750M)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752)},
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -2082,6 +2082,7 @@
+ #define PCI_DEVICE_ID_NX2_57711E 0x1650
+ #define PCI_DEVICE_ID_TIGON3_5705 0x1653
+ #define PCI_DEVICE_ID_TIGON3_5705_2 0x1654
++#define PCI_DEVICE_ID_TIGON3_5720 0x1658
+ #define PCI_DEVICE_ID_TIGON3_5721 0x1659
+ #define PCI_DEVICE_ID_TIGON3_5722 0x165a
+ #define PCI_DEVICE_ID_TIGON3_5723 0x165b
+@@ -2097,11 +2098,13 @@
+ #define PCI_DEVICE_ID_TIGON3_5754M 0x1672
+ #define PCI_DEVICE_ID_TIGON3_5755M 0x1673
+ #define PCI_DEVICE_ID_TIGON3_5756 0x1674
++#define PCI_DEVICE_ID_TIGON3_5750 0x1676
+ #define PCI_DEVICE_ID_TIGON3_5751 0x1677
+ #define PCI_DEVICE_ID_TIGON3_5715 0x1678
+ #define PCI_DEVICE_ID_TIGON3_5715S 0x1679
+ #define PCI_DEVICE_ID_TIGON3_5754 0x167a
+ #define PCI_DEVICE_ID_TIGON3_5755 0x167b
++#define PCI_DEVICE_ID_TIGON3_5750M 0x167c
+ #define PCI_DEVICE_ID_TIGON3_5751M 0x167d
+ #define PCI_DEVICE_ID_TIGON3_5751F 0x167e
+ #define PCI_DEVICE_ID_TIGON3_5787F 0x167f
diff --git a/target/linux/brcm47xx/patches-3.2/900-bcm47xx_wdt-noprescale.patch b/target/linux/brcm47xx/patches-3.2/900-bcm47xx_wdt-noprescale.patch
new file mode 100644
index 0000000000..d60247e91a
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/900-bcm47xx_wdt-noprescale.patch
@@ -0,0 +1,104 @@
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -31,6 +31,7 @@
+
+ #define WDT_DEFAULT_TIME 30 /* seconds */
+ #define WDT_MAX_TIME 255 /* seconds */
++#define WDT_SHIFT 15 /* 32.768 KHz on cores with slow WDT clock */
+
+ static int wdt_time = WDT_DEFAULT_TIME;
+ static int nowayout = WATCHDOG_NOWAYOUT;
+@@ -50,20 +51,20 @@ static unsigned long bcm47xx_wdt_busy;
+ static char expect_release;
+ static struct timer_list wdt_timer;
+ static atomic_t ticks;
++static int needs_sw_scale;
+
+-static inline void bcm47xx_wdt_hw_start(void)
++static inline void bcm47xx_wdt_hw_start(u32 ticks)
+ {
+- /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
+ switch (bcm47xx_bus_type) {
+ #ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
++ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, ticks);
+ break;
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
+- 0xfffffff);
++ ticks);
+ break;
+ #endif
+ }
+@@ -88,33 +89,34 @@ static inline int bcm47xx_wdt_hw_stop(vo
+ static void bcm47xx_timer_tick(unsigned long unused)
+ {
+ if (!atomic_dec_and_test(&ticks)) {
+- bcm47xx_wdt_hw_start();
++ /* This is 2,5s on 100Mhz clock and 2s on 133 Mhz */
++ bcm47xx_wdt_hw_start(0xfffffff);
+ mod_timer(&wdt_timer, jiffies + HZ);
+ } else {
+- printk(KERN_CRIT DRV_NAME "Watchdog will fire soon!!!\n");
++ printk(KERN_CRIT DRV_NAME ": Watchdog will fire soon!!!\n");
+ }
+ }
+
+-static inline void bcm47xx_wdt_pet(void)
++static void bcm47xx_wdt_pet(void)
+ {
+- atomic_set(&ticks, wdt_time);
++ if(needs_sw_scale)
++ atomic_set(&ticks, wdt_time);
++ else
++ bcm47xx_wdt_hw_start(wdt_time << WDT_SHIFT);
+ }
+
+ static void bcm47xx_wdt_start(void)
+ {
+ bcm47xx_wdt_pet();
+- bcm47xx_timer_tick(0);
+-}
+-
+-static void bcm47xx_wdt_pause(void)
+-{
+- del_timer_sync(&wdt_timer);
+- bcm47xx_wdt_hw_stop();
++ if(needs_sw_scale)
++ bcm47xx_timer_tick(0);
+ }
+
+ static void bcm47xx_wdt_stop(void)
+ {
+- bcm47xx_wdt_pause();
++ if(needs_sw_scale)
++ del_timer_sync(&wdt_timer);
++ bcm47xx_wdt_hw_stop();
+ }
+
+ static int bcm47xx_wdt_settimeout(int new_time)
+@@ -266,7 +268,20 @@ static int __init bcm47xx_wdt_init(void)
+ if (bcm47xx_wdt_hw_stop() < 0)
+ return -ENODEV;
+
+- setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
++ /* FIXME Other cores */
++#ifdef BCM47XX_BUS_TYPE_BCMA
++ if(bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA &&
++ bcm47xx_bus.ssb.chip_id == 0x5354) {
++ /* Slow WDT clock, no pre-scaling */
++ needs_sw_scale = 0;
++ } else {
++#endif
++ /* Fast WDT clock, needs software pre-scaling */
++ needs_sw_scale = 1;
++ setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
++#ifdef BCM47XX_BUS_TYPE_BCMA
++ }
++#endif
+
+ if (bcm47xx_wdt_settimeout(wdt_time)) {
+ bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME);
diff --git a/target/linux/brcm47xx/patches-3.2/920-cache-wround.patch b/target/linux/brcm47xx/patches-3.2/920-cache-wround.patch
new file mode 100644
index 0000000000..0f6f76596b
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/920-cache-wround.patch
@@ -0,0 +1,138 @@
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -20,10 +20,28 @@
+ #ifdef CONFIG_BCM47XX
+ #include <asm/paccess.h>
+ #include <linux/ssb/ssb.h>
+-#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
++#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
++
++static inline unsigned long bcm4710_dummy_rreg(void)
++{
++ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
++}
++
++#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
++
++static inline unsigned long bcm4710_fill_tlb(void *addr)
++{
++ return *(unsigned long *)addr;
++}
++
++#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
++
++static inline void bcm4710_protected_fill_tlb(void *addr)
++{
++ unsigned long x;
++ get_dbe(x, (unsigned long *)addr);;
++}
+
+-#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
+-#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
+ #else
+ #define BCM4710_DUMMY_RREG()
+
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -914,6 +914,9 @@ build_get_pgde32(u32 **p, unsigned int t
+ #endif
+ uasm_i_addu(p, ptr, tmp, ptr);
+ #else
++#ifdef CONFIG_BCM47XX
++ uasm_i_nop(p);
++#endif
+ UASM_i_LA_mostly(p, ptr, pgdc);
+ #endif
+ uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
+@@ -1264,12 +1267,12 @@ static void __cpuinit build_r4000_tlb_re
+ /* No need for uasm_i_nop */
+ }
+
+-#ifdef CONFIG_BCM47XX
+- uasm_i_nop(&p);
+-#endif
+ #ifdef CONFIG_64BIT
+ build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
+ #else
++# ifdef CONFIG_BCM47XX
++ uasm_i_nop(&p);
++# endif
+ build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
+ #endif
+
+@@ -1281,6 +1284,9 @@ static void __cpuinit build_r4000_tlb_re
+ build_update_entries(&p, K0, K1);
+ build_tlb_write_entry(&p, &l, &r, tlb_random);
+ uasm_l_leave(&l, p);
++#ifdef CONFIG_BCM47XX
++ uasm_i_nop(&p);
++#endif
+ uasm_i_eret(&p); /* return from trap */
+ }
+ #ifdef CONFIG_HUGETLB_PAGE
+@@ -1797,12 +1803,12 @@ build_r4000_tlbchange_handler_head(u32 *
+ {
+ struct work_registers wr = build_get_work_registers(p);
+
+-#ifdef CONFIG_BCM47XX
+- uasm_i_nop(p);
+-#endif
+ #ifdef CONFIG_64BIT
+ build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
+ #else
++# ifdef CONFIG_BCM47XX
++ uasm_i_nop(p);
++# endif
+ build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
+ #endif
+
+@@ -1841,6 +1847,9 @@ build_r4000_tlbchange_handler_tail(u32 *
+ build_tlb_write_entry(p, l, r, tlb_indexed);
+ uasm_l_leave(l, *p);
+ build_restore_work_registers(p);
++#ifdef CONFIG_BCM47XX
++ uasm_i_nop(p);
++#endif
+ uasm_i_eret(p); /* return from trap */
+
+ #ifdef CONFIG_64BIT
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -22,6 +22,19 @@
+ #include <asm/page.h>
+ #include <asm/thread_info.h>
+
++#ifdef CONFIG_BCM47XX
++# ifdef eret
++# undef eret
++# endif
++# define eret \
++ .set push; \
++ .set noreorder; \
++ nop; \
++ nop; \
++ eret; \
++ .set pop;
++#endif
++
+ #define PANIC_PIC(msg) \
+ .set push; \
+ .set reorder; \
+@@ -54,7 +67,6 @@ NESTED(except_vec3_generic, 0, sp)
+ .set noat
+ #ifdef CONFIG_BCM47XX
+ nop
+- nop
+ #endif
+ #if R5432_CP0_INTERRUPT_WAR
+ mfc0 k0, CP0_INDEX
+@@ -79,6 +91,9 @@ NESTED(except_vec3_r4000, 0, sp)
+ .set push
+ .set mips3
+ .set noat
++#ifdef CONFIG_BCM47XX
++ nop
++#endif
+ mfc0 k1, CP0_CAUSE
+ li k0, 31<<2
+ andi k1, k1, 0x7c
diff --git a/target/linux/brcm47xx/patches-3.2/940-bcm47xx-yenta.patch b/target/linux/brcm47xx/patches-3.2/940-bcm47xx-yenta.patch
new file mode 100644
index 0000000000..c65958eda8
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/940-bcm47xx-yenta.patch
@@ -0,0 +1,46 @@
+--- a/drivers/pcmcia/yenta_socket.c
++++ b/drivers/pcmcia/yenta_socket.c
+@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
+ * Probe for usable interrupts using the force
+ * register to generate bogus card status events.
+ */
++#ifndef CONFIG_BCM47XX
++ /* WRT54G3G does not like this */
+ cb_writel(socket, CB_SOCKET_EVENT, -1);
+ cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
+ reg = exca_readb(socket, I365_CSCINT);
+@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
+ }
+ cb_writel(socket, CB_SOCKET_MASK, 0);
+ exca_writeb(socket, I365_CSCINT, reg);
++#endif
+
+ mask = probe_irq_mask(val) & 0xffff;
+
+@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
+ else
+ socket->socket.irq_mask = 0;
+
++ /* irq mask probing is broken for the WRT54G3G */
++ if (socket->socket.irq_mask == 0)
++ socket->socket.irq_mask = 0x6f8;
++
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "ISA IRQ mask 0x%04x, PCI irq %d\n",
+ socket->socket.irq_mask, socket->cb_irq);
+@@ -1257,6 +1264,15 @@ static int __devinit yenta_probe(struct
+ dev_printk(KERN_INFO, &dev->dev,
+ "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+
++ /* Generate an interrupt on card insert/remove */
++ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
++
++ /* Set up Multifunction Routing Status Register */
++ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
++
++ /* Switch interrupts to parallelized */
++ config_writeb(socket, 0x92, 0x64);
++
+ yenta_fixup_parent_bridge(dev->subordinate);
+
+ /* Register it with the pcmcia layer.. */
diff --git a/target/linux/brcm47xx/patches-3.2/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-3.2/976-ssb_increase_pci_delay.patch
new file mode 100644
index 0000000000..ab57225e7f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/976-ssb_increase_pci_delay.patch
@@ -0,0 +1,11 @@
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -373,7 +373,7 @@ static void __devinit ssb_pcicore_init_h
+ set_io_port_base(ssb_pcicore_controller.io_map_base);
+ /* Give some time to the PCI controller to configure itself with the new
+ * values. Not waiting at this point causes crashes of the machine. */
+- mdelay(10);
++ mdelay(300);
+ register_pci_controller(&ssb_pcicore_controller);
+ }
+
diff --git a/target/linux/brcm47xx/patches-3.2/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.2/980-wnr834b_no_cardbus_invariant.patch
new file mode 100644
index 0000000000..2207a5ced5
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/980-wnr834b_no_cardbus_invariant.patch
@@ -0,0 +1,13 @@
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -278,6 +278,10 @@ static int bcm47xx_get_invariants(struct
+ if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+ iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
+
++ /* Do not indicate cardbus for Netgear WNR834B V1 and V2 */
++ if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot)
++ iv->has_cardbus_slot = 0;
++
+ return 0;
+ }
+
diff --git a/target/linux/brcm47xx/patches-3.2/999-wl_exports.patch b/target/linux/brcm47xx/patches-3.2/999-wl_exports.patch
new file mode 100644
index 0000000000..5f8e8d3508
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.2/999-wl_exports.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -22,7 +22,8 @@
+ #include <asm/mach-bcm47xx/bcm47xx.h>
+ #include <asm/mach-bcm47xx/bus.h>
+
+-static char nvram_buf[NVRAM_SPACE];
++char nvram_buf[NVRAM_SPACE];
++EXPORT_SYMBOL(nvram_buf);
+ static int cfe_env;
+ extern char *cfe_env_get(char *nv_buf, const char *name);
+
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -57,6 +57,7 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_inv);
+
+ #endif /* CONFIG_DMA_NONCOHERENT */
+