aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm47xx/patches-2.6.25
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm47xx/patches-2.6.25')
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/001-ssb-fix-gpio-api.patch160
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/100-board_support.patch220
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch20
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/120-b44_ssb_support.patch1544
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/121-fix_b44_phyaddr.patch15
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch38
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch122
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch48
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/170-cpu_wait.patch12
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch22
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/230-ohci-ssb.patch345
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/240-ohci-ssb-pm.patch30
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch10
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch8
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch6
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch21
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch384
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/410-aec62xx_pci_enable.patch32
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch18
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/600-ssb-fix-pcidevices.patch65
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch21
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/602-ssb-fix-serial-on-new-devices.patch90
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/610-ssb-watchdog-fix.patch133
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch8
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/621-ssb-common-gpio-api.patch245
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/622-ssb-cardbus-fixes.patch116
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch40
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch14
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch211
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/800-cfe-workaround.patch23
30 files changed, 754 insertions, 3267 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.25/001-ssb-fix-gpio-api.patch b/target/linux/brcm47xx/patches-2.6.25/001-ssb-fix-gpio-api.patch
deleted file mode 100644
index f8d454f5a4..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/001-ssb-fix-gpio-api.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-Index: linux-2.6.23.16/drivers/ssb/driver_chipcommon.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_chipcommon.c 2008-02-19 14:37:06.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_chipcommon.c 2008-02-19 14:37:08.000000000 +0100
-@@ -39,12 +39,14 @@ static inline void chipco_write32(struct
- ssb_write32(cc->dev, offset, value);
- }
-
--static inline void chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
-- u32 mask, u32 value)
-+static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
-+ u32 mask, u32 value)
- {
- value &= mask;
- value |= chipco_read32(cc, offset) & ~mask;
- chipco_write32(cc, offset, value);
-+
-+ return value;
- }
-
- void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
-@@ -355,16 +357,37 @@ u32 ssb_chipco_gpio_in(struct ssb_chipco
- {
- return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
- }
-+EXPORT_SYMBOL(ssb_chipco_gpio_in);
-+
-+u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
-+{
-+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
-+}
-+EXPORT_SYMBOL(ssb_chipco_gpio_out);
-+
-+u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
-+{
-+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
-+}
-+EXPORT_SYMBOL(ssb_chipco_gpio_outen);
-+
-+u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
-+{
-+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
-+}
-+EXPORT_SYMBOL(ssb_chipco_gpio_control);
-
--void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
-+u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
-- chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
-+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
- }
-+EXPORT_SYMBOL(ssb_chipco_gpio_intmask);
-
--void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
-+u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
-- chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
-+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
- }
-+EXPORT_SYMBOL(ssb_chipco_gpio_polarity);
-
- #ifdef CONFIG_SSB_SERIAL
- int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
-Index: linux-2.6.23.16/drivers/ssb/driver_extif.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_extif.c 2008-02-19 14:37:06.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_extif.c 2008-02-19 14:37:08.000000000 +0100
-@@ -27,12 +27,14 @@ static inline void extif_write32(struct
- ssb_write32(extif->dev, offset, value);
- }
-
--static inline void extif_write32_masked(struct ssb_extif *extif, u16 offset,
-- u32 mask, u32 value)
-+static inline u32 extif_write32_masked(struct ssb_extif *extif, u16 offset,
-+ u32 mask, u32 value)
- {
- value &= mask;
- value |= extif_read32(extif, offset) & ~mask;
- extif_write32(extif, offset, value);
-+
-+ return value;
- }
-
- #ifdef CONFIG_SSB_SERIAL
-@@ -114,16 +116,30 @@ u32 ssb_extif_gpio_in(struct ssb_extif *
- {
- return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
- }
-+EXPORT_SYMBOL(ssb_extif_gpio_in);
-
--void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
-+u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
- {
- return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
- mask, value);
- }
-+EXPORT_SYMBOL(ssb_extif_gpio_out);
-
--void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
-+u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
- {
- return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
- mask, value);
- }
-+EXPORT_SYMBOL(ssb_extif_gpio_outen);
-+
-+u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value)
-+{
-+ return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
-+}
-+EXPORT_SYMBOL(ssb_extif_gpio_polarity);
-
-+u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value)
-+{
-+ return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
-+}
-+EXPORT_SYMBOL(ssb_extif_gpio_intmask);
-Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_chipcommon.h
-===================================================================
---- linux-2.6.23.16.orig/include/linux/ssb/ssb_driver_chipcommon.h 2008-02-19 14:37:06.000000000 +0100
-+++ linux-2.6.23.16/include/linux/ssb/ssb_driver_chipcommon.h 2008-02-19 14:37:08.000000000 +0100
-@@ -382,11 +382,13 @@ extern void ssb_chipco_set_clockmode(str
- extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
- u32 ticks);
-
-+/* Chipcommon GPIO pin access. */
- u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask);
--
--void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value);
--
--void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value);
-+u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value);
-+u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value);
-+u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
-+u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
-+u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
-
- #ifdef CONFIG_SSB_SERIAL
- extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
-Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_extif.h
-===================================================================
---- linux-2.6.23.16.orig/include/linux/ssb/ssb_driver_extif.h 2008-02-19 14:37:06.000000000 +0100
-+++ linux-2.6.23.16/include/linux/ssb/ssb_driver_extif.h 2008-02-19 14:37:08.000000000 +0100
-@@ -171,11 +171,12 @@ extern void ssb_extif_get_clockcontrol(s
- extern void ssb_extif_timing_init(struct ssb_extif *extif,
- unsigned long ns);
-
-+/* Extif GPIO pin access */
- u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
--
--void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
--
--void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
-+u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
-+u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
-+u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value);
-+u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value);
-
- #ifdef CONFIG_SSB_SERIAL
- extern int ssb_extif_serial_init(struct ssb_extif *extif,
diff --git a/target/linux/brcm47xx/patches-2.6.25/100-board_support.patch b/target/linux/brcm47xx/patches-2.6.25/100-board_support.patch
index 7f28f340fc..d094b9ba88 100644
--- a/target/linux/brcm47xx/patches-2.6.25/100-board_support.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/100-board_support.patch
@@ -1,154 +1,33 @@
-Index: linux-2.6.23/arch/mips/Kconfig
-===================================================================
---- linux-2.6.23.orig/arch/mips/Kconfig 2007-10-13 02:23:06.662507926 +0200
-+++ linux-2.6.23/arch/mips/Kconfig 2007-10-13 02:23:41.484492317 +0200
-@@ -4,6 +4,10 @@
- # Horrible source of confusion. Die, die, die ...
- select EMBEDDED
-
-+config CFE
-+ bool
-+ # Common Firmware Environment
-+
- mainmenu "Linux/MIPS Kernel Configuration"
-
- menu "Machine selection"
-@@ -44,6 +48,23 @@
- note that a kernel built with this option selected will not be
- able to run on normal units.
-
-+config BCM947XX
-+ bool "Support for BCM947xx based boards"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_LITTLE_ENDIAN
-+ select SSB
+Index: linux-2.6.25/arch/mips/Kconfig
+===================================================================
+--- linux-2.6.25.orig/arch/mips/Kconfig 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/arch/mips/Kconfig 2008-04-26 22:08:17.000000000 +0100
+@@ -50,8 +50,10 @@ config BCM47XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SSB
+ select SSB_SERIAL
+ select SSB_DRIVER_MIPS
+ select SSB_DRIVER_EXTIF
+ select SSB_DRIVER_PCICORE
-+ select SSB_PCICORE_HOSTMODE
-+ select CFE
-+ select GENERIC_GPIO
-+ help
-+ Support for BCM947xx based boards
-+
- config MIPS_COBALT
- bool "Cobalt Server"
- select DMA_NONCOHERENT
-Index: linux-2.6.23/arch/mips/kernel/cpu-probe.c
-===================================================================
---- linux-2.6.23.orig/arch/mips/kernel/cpu-probe.c 2007-10-13 02:23:06.666508151 +0200
-+++ linux-2.6.23/arch/mips/kernel/cpu-probe.c 2007-10-13 02:23:11.210767122 +0200
-@@ -793,6 +793,28 @@
- }
+ select SSB_PCICORE_HOSTMODE if PCI
+ select GENERIC_GPIO
+ select SYS_HAS_EARLY_PRINTK
+@@ -790,6 +792,7 @@ config CSRC_SB1250
+ config CFE
+ bool
++ # Common Firmware Environment
-+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
-+{
-+ decode_config1(c);
-+ switch (c->processor_id & 0xff00) {
-+ case PRID_IMP_BCM3302:
-+ c->cputype = CPU_BCM3302;
-+ c->isa_level = MIPS_CPU_ISA_M32R1;
-+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-+ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER;
-+ break;
-+ case PRID_IMP_BCM4710:
-+ c->cputype = CPU_BCM4710;
-+ c->isa_level = MIPS_CPU_ISA_M32R1;
-+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-+ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER;
-+ break;
-+ default:
-+ c->cputype = CPU_UNKNOWN;
-+ break;
-+ }
-+}
-+
- __init void cpu_probe(void)
- {
- struct cpuinfo_mips *c = &current_cpu_data;
-@@ -815,6 +837,9 @@
- case PRID_COMP_SIBYTE:
- cpu_probe_sibyte(c);
- break;
-+ case PRID_COMP_BROADCOM:
-+ cpu_probe_broadcom(c);
-+ break;
- case PRID_COMP_SANDCRAFT:
- cpu_probe_sandcraft(c);
- break;
-Index: linux-2.6.23/arch/mips/kernel/proc.c
-===================================================================
---- linux-2.6.23.orig/arch/mips/kernel/proc.c 2007-10-13 02:23:06.678508839 +0200
-+++ linux-2.6.23/arch/mips/kernel/proc.c 2007-10-13 02:23:11.210767122 +0200
-@@ -82,6 +82,8 @@
- [CPU_VR4181] = "NEC VR4181",
- [CPU_VR4181A] = "NEC VR4181A",
- [CPU_SR71000] = "Sandcraft SR71000",
-+ [CPU_BCM3302] = "Broadcom BCM3302",
-+ [CPU_BCM4710] = "Broadcom BCM4710",
- [CPU_PR4450] = "Philips PR4450",
- [CPU_LOONGSON2] = "ICT Loongson-2",
- };
-Index: linux-2.6.23/arch/mips/Makefile
-===================================================================
---- linux-2.6.23.orig/arch/mips/Makefile 2007-10-13 02:23:06.682509066 +0200
-+++ linux-2.6.23/arch/mips/Makefile 2007-10-13 02:23:11.210767122 +0200
-@@ -533,6 +533,18 @@
- load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
-
- #
-+# Broadcom BCM47XX boards
-+#
-+core-$(CONFIG_BCM947XX) += arch/mips/bcm947xx/
-+cflags-$(CONFIG_BCM947XX) += -Iarch/mips/bcm947xx/include -Iinclude/asm-mips/mach-bcm947xx
-+load-$(CONFIG_BCM947XX) := 0xffffffff80001000
-+
-+#
-+# Common Firmware Environment
-+#
-+core-$(CONFIG_CFE) += arch/mips/cfe/
-+
-+#
- # SNI RM
- #
- core-$(CONFIG_SNI_RM) += arch/mips/sni/
-Index: linux-2.6.23/arch/mips/mm/tlbex.c
-===================================================================
---- linux-2.6.23.orig/arch/mips/mm/tlbex.c 2007-10-13 02:23:06.694509748 +0200
-+++ linux-2.6.23/arch/mips/mm/tlbex.c 2007-10-13 02:26:00.272401391 +0200
-@@ -895,6 +895,8 @@
- case CPU_AU1550:
- case CPU_AU1200:
- case CPU_PR4450:
-+ case CPU_BCM3302:
-+ case CPU_BCM4710:
- i_nop(p);
- tlbw(p);
- break;
-Index: linux-2.6.23/drivers/Kconfig
-===================================================================
---- linux-2.6.23.orig/drivers/Kconfig 2007-10-13 02:23:06.702510206 +0200
-+++ linux-2.6.23/drivers/Kconfig 2007-10-13 02:23:11.214767346 +0200
-@@ -58,6 +58,8 @@
-
- source "drivers/hwmon/Kconfig"
-
-+source "drivers/ssb/Kconfig"
-+
- source "drivers/mfd/Kconfig"
-
- source "drivers/media/Kconfig"
-Index: linux-2.6.23/include/asm-mips/bootinfo.h
+ config DMA_COHERENT
+ bool
+Index: linux-2.6.25/include/asm-mips/bootinfo.h
===================================================================
---- linux-2.6.23.orig/include/asm-mips/bootinfo.h 2007-10-13 02:23:06.718511119 +0200
-+++ linux-2.6.23/include/asm-mips/bootinfo.h 2007-10-13 02:23:11.214767346 +0200
-@@ -208,6 +208,12 @@
- #define MACH_GROUP_WINDRIVER 28 /* Windriver boards */
- #define MACH_WRPPMC 1
+--- linux-2.6.25.orig/include/asm-mips/bootinfo.h 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/include/asm-mips/bootinfo.h 2008-04-26 21:57:10.000000000 +0100
+@@ -94,6 +94,12 @@
+ #define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */
+ #define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */
+/*
+ * Valid machtype for group Broadcom
@@ -158,51 +37,12 @@ Index: linux-2.6.23/include/asm-mips/bootinfo.h
+
#define CL_SIZE COMMAND_LINE_SIZE
- const char *get_system_type(void);
-Index: linux-2.6.23/include/asm-mips/cpu.h
-===================================================================
---- linux-2.6.23.orig/include/asm-mips/cpu.h 2007-10-13 02:23:06.726511570 +0200
-+++ linux-2.6.23/include/asm-mips/cpu.h 2007-10-13 02:27:43.994312161 +0200
-@@ -106,6 +106,13 @@
- #define PRID_IMP_SR71000 0x0400
-
- /*
-+ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
-+ */
-+
-+#define PRID_IMP_BCM4710 0x4000
-+#define PRID_IMP_BCM3302 0x9000
-+
-+/*
- * Definitions for 7:0 on legacy processors
- */
-
-@@ -217,8 +224,10 @@
- #define CPU_R14000 64
- #define CPU_LOONGSON1 65
- #define CPU_LOONGSON2 66
-+#define CPU_BCM3302 67
-+#define CPU_BCM4710 68
-
--#define CPU_LAST 66
-+#define CPU_LAST 68
-
- /*
- * ISA Level encodings
-Index: linux-2.6.23.1/drivers/Makefile
-===================================================================
---- linux-2.6.23.1.orig/drivers/Makefile 2008-01-27 04:34:31.000000000 +0100
-+++ linux-2.6.23.1/drivers/Makefile 2008-01-27 04:39:57.000000000 +0100
-@@ -89,3 +89,4 @@
- obj-$(CONFIG_PPC_PS3) += ps3/
- obj-$(CONFIG_OF) += of/
- obj-$(CONFIG_GPIO_DEVICE) += gpio/
-+obj-$(CONFIG_SSB) += ssb/
-Index: linux-2.6.23.1/include/linux/pci_ids.h
+ extern char *system_type;
+Index: linux-2.6.25/include/linux/pci_ids.h
===================================================================
---- linux-2.6.23.1.orig/include/linux/pci_ids.h 2008-01-27 04:55:18.000000000 +0100
-+++ linux-2.6.23.1/include/linux/pci_ids.h 2008-01-27 04:55:22.000000000 +0100
-@@ -1972,6 +1972,7 @@
+--- linux-2.6.25.orig/include/linux/pci_ids.h 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/include/linux/pci_ids.h 2008-04-26 21:57:10.000000000 +0100
+@@ -2000,6 +2000,7 @@
#define PCI_DEVICE_ID_TIGON3_5906M 0x1713
#define PCI_DEVICE_ID_BCM4401 0x4401
#define PCI_DEVICE_ID_BCM4401B0 0x4402
diff --git a/target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch b/target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch
index 7dc05b6c6a..11422b71d8 100644
--- a/target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch
@@ -1,25 +1,25 @@
-Index: linux-2.6.23/drivers/mtd/maps/Kconfig
+Index: linux-2.6.25/drivers/mtd/maps/Kconfig
===================================================================
---- linux-2.6.23.orig/drivers/mtd/maps/Kconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6.23/drivers/mtd/maps/Kconfig 2007-10-13 02:28:13.644001805 +0200
-@@ -352,6 +352,12 @@
+--- linux-2.6.25.orig/drivers/mtd/maps/Kconfig 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/drivers/mtd/maps/Kconfig 2008-04-26 21:57:12.000000000 +0100
+@@ -337,6 +337,12 @@ config MTD_CFI_FLAGADM
Mapping for the Flaga digital module. If you don't have one, ignore
this setting.
+config MTD_BCM47XX
+ tristate "BCM47xx flash device"
-+ depends on MIPS && MTD_CFI && BCM947XX
++ depends on MIPS && MTD_CFI && BCM47XX
+ help
+ Support for the flash chips on the BCM947xx board.
+
config MTD_WALNUT
tristate "Flash device mapped on IBM 405GP Walnut"
- depends on MTD_JEDECPROBE && WALNUT
-Index: linux-2.6.23/drivers/mtd/maps/Makefile
+ depends on MTD_JEDECPROBE && WALNUT && !PPC_MERGE
+Index: linux-2.6.25/drivers/mtd/maps/Makefile
===================================================================
---- linux-2.6.23.orig/drivers/mtd/maps/Makefile 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6.23/drivers/mtd/maps/Makefile 2007-10-13 02:27:56.727037761 +0200
-@@ -33,6 +33,7 @@
+--- linux-2.6.25.orig/drivers/mtd/maps/Makefile 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/drivers/mtd/maps/Makefile 2008-04-26 21:57:12.000000000 +0100
+@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcm
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
diff --git a/target/linux/brcm47xx/patches-2.6.25/120-b44_ssb_support.patch b/target/linux/brcm47xx/patches-2.6.25/120-b44_ssb_support.patch
deleted file mode 100644
index 29125c6755..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/120-b44_ssb_support.patch
+++ /dev/null
@@ -1,1544 +0,0 @@
-Index: linux-2.6.23.16/drivers/net/b44.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/net/b44.c 2008-02-19 01:35:58.000000000 +0100
-+++ linux-2.6.23.16/drivers/net/b44.c 2008-02-19 01:37:04.000000000 +0100
-@@ -1,7 +1,9 @@
--/* b44.c: Broadcom 4400 device driver.
-+/* b44.c: Broadcom 4400/47xx device driver.
- *
- * Copyright (C) 2002 David S. Miller (davem@redhat.com)
-- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
-+ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi)
-+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ * Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org)
- * Copyright (C) 2006 Broadcom Corporation.
- *
- * Distribute under GPL.
-@@ -21,11 +23,13 @@
- #include <linux/delay.h>
- #include <linux/init.h>
- #include <linux/dma-mapping.h>
-+#include <linux/ssb/ssb.h>
-
- #include <asm/uaccess.h>
- #include <asm/io.h>
- #include <asm/irq.h>
-
-+
- #include "b44.h"
-
- #define DRV_MODULE_NAME "b44"
-@@ -87,8 +91,8 @@
- static char version[] __devinitdata =
- DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
-
--MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller");
--MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver");
-+MODULE_AUTHOR("Felix Fietkau, Florian Schirmer, Pekka Pietikainen, David S. Miller");
-+MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver");
- MODULE_LICENSE("GPL");
- MODULE_VERSION(DRV_MODULE_VERSION);
-
-@@ -96,18 +100,11 @@ static int b44_debug = -1; /* -1 == use
- module_param(b44_debug, int, 0);
- MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value");
-
--static struct pci_device_id b44_pci_tbl[] = {
-- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401,
-- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B0,
-- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1,
-- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-- { } /* terminate list with empty entry */
-+static struct ssb_device_id b44_ssb_tbl[] = {
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET, SSB_ANY_REV),
-+ SSB_DEVTABLE_END
- };
-
--MODULE_DEVICE_TABLE(pci, b44_pci_tbl);
--
- static void b44_halt(struct b44 *);
- static void b44_init_rings(struct b44 *);
-
-@@ -119,6 +116,7 @@ static void b44_init_hw(struct b44 *, in
-
- static int dma_desc_align_mask;
- static int dma_desc_sync_size;
-+static int instance;
-
- static const char b44_gstrings[][ETH_GSTRING_LEN] = {
- #define _B44(x...) # x,
-@@ -126,35 +124,24 @@ B44_STAT_REG_DECLARE
- #undef _B44
- };
-
--static inline void b44_sync_dma_desc_for_device(struct pci_dev *pdev,
-- dma_addr_t dma_base,
-- unsigned long offset,
-- enum dma_data_direction dir)
--{
-- dma_sync_single_range_for_device(&pdev->dev, dma_base,
-- offset & dma_desc_align_mask,
-- dma_desc_sync_size, dir);
--}
--
--static inline void b44_sync_dma_desc_for_cpu(struct pci_dev *pdev,
-- dma_addr_t dma_base,
-- unsigned long offset,
-- enum dma_data_direction dir)
--{
-- dma_sync_single_range_for_cpu(&pdev->dev, dma_base,
-- offset & dma_desc_align_mask,
-- dma_desc_sync_size, dir);
--}
--
--static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
--{
-- return readl(bp->regs + reg);
--}
--
--static inline void bw32(const struct b44 *bp,
-- unsigned long reg, unsigned long val)
--{
-- writel(val, bp->regs + reg);
-+static inline void b44_sync_dma_desc_for_device(struct ssb_device *sdev,
-+ dma_addr_t dma_base,
-+ unsigned long offset,
-+ enum dma_data_direction dir)
-+{
-+ dma_sync_single_range_for_device(sdev->dev, dma_base,
-+ offset & dma_desc_align_mask,
-+ dma_desc_sync_size, dir);
-+}
-+
-+static inline void b44_sync_dma_desc_for_cpu(struct ssb_device *sdev,
-+ dma_addr_t dma_base,
-+ unsigned long offset,
-+ enum dma_data_direction dir)
-+{
-+ dma_sync_single_range_for_cpu(sdev->dev, dma_base,
-+ offset & dma_desc_align_mask,
-+ dma_desc_sync_size, dir);
- }
-
- static int b44_wait_bit(struct b44 *bp, unsigned long reg,
-@@ -182,117 +169,29 @@ static int b44_wait_bit(struct b44 *bp,
- return 0;
- }
-
--/* Sonics SiliconBackplane support routines. ROFL, you should see all the
-- * buzz words used on this company's website :-)
-- *
-- * All of these routines must be invoked with bp->lock held and
-- * interrupts disabled.
-- */
--
--#define SB_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */
--#define BCM4400_PCI_CORE_ADDR 0x18002000 /* Address of PCI core on BCM4400 cards */
--
--static u32 ssb_get_core_rev(struct b44 *bp)
--{
-- return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK);
--}
--
--static u32 ssb_pci_setup(struct b44 *bp, u32 cores)
--{
-- u32 bar_orig, pci_rev, val;
--
-- pci_read_config_dword(bp->pdev, SSB_BAR0_WIN, &bar_orig);
-- pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR);
-- pci_rev = ssb_get_core_rev(bp);
--
-- val = br32(bp, B44_SBINTVEC);
-- val |= cores;
-- bw32(bp, B44_SBINTVEC, val);
--
-- val = br32(bp, SSB_PCI_TRANS_2);
-- val |= SSB_PCI_PREF | SSB_PCI_BURST;
-- bw32(bp, SSB_PCI_TRANS_2, val);
--
-- pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig);
--
-- return pci_rev;
--}
--
--static void ssb_core_disable(struct b44 *bp)
--{
-- if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET)
-- return;
--
-- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK));
-- b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0);
-- b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1);
-- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK |
-- SBTMSLOW_REJECT | SBTMSLOW_RESET));
-- br32(bp, B44_SBTMSLOW);
-- udelay(1);
-- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET));
-- br32(bp, B44_SBTMSLOW);
-- udelay(1);
--}
--
--static void ssb_core_reset(struct b44 *bp)
-+static inline void __b44_cam_read(struct b44 *bp, unsigned char *data, int index)
- {
- u32 val;
-
-- ssb_core_disable(bp);
-- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC));
-- br32(bp, B44_SBTMSLOW);
-- udelay(1);
--
-- /* Clear SERR if set, this is a hw bug workaround. */
-- if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR)
-- bw32(bp, B44_SBTMSHIGH, 0);
--
-- val = br32(bp, B44_SBIMSTATE);
-- if (val & (SBIMSTATE_IBE | SBIMSTATE_TO))
-- bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO));
--
-- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC));
-- br32(bp, B44_SBTMSLOW);
-- udelay(1);
-+ bw32(bp, B44_CAM_CTRL, (CAM_CTRL_READ |
-+ (index << CAM_CTRL_INDEX_SHIFT)));
-
-- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK));
-- br32(bp, B44_SBTMSLOW);
-- udelay(1);
--}
-+ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);
-
--static int ssb_core_unit(struct b44 *bp)
--{
--#if 0
-- u32 val = br32(bp, B44_SBADMATCH0);
-- u32 base;
-+ val = br32(bp, B44_CAM_DATA_LO);
-
-- type = val & SBADMATCH0_TYPE_MASK;
-- switch (type) {
-- case 0:
-- base = val & SBADMATCH0_BS0_MASK;
-- break;
-+ data[2] = (val >> 24) & 0xFF;
-+ data[3] = (val >> 16) & 0xFF;
-+ data[4] = (val >> 8) & 0xFF;
-+ data[5] = (val >> 0) & 0xFF;
-
-- case 1:
-- base = val & SBADMATCH0_BS1_MASK;
-- break;
-+ val = br32(bp, B44_CAM_DATA_HI);
-
-- case 2:
-- default:
-- base = val & SBADMATCH0_BS2_MASK;
-- break;
-- };
--#endif
-- return 0;
-+ data[0] = (val >> 8) & 0xFF;
-+ data[1] = (val >> 0) & 0xFF;
- }
-
--static int ssb_is_core_up(struct b44 *bp)
--{
-- return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK))
-- == SBTMSLOW_CLOCK);
--}
--
--static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
-+static inline void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
- {
- u32 val;
-
-@@ -328,14 +227,14 @@ static void b44_enable_ints(struct b44 *
- bw32(bp, B44_IMASK, bp->imask);
- }
-
--static int b44_readphy(struct b44 *bp, int reg, u32 *val)
-+static int __b44_readphy(struct b44 *bp, int phy_addr, int reg, u32 *val)
- {
- int err;
-
- bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
- bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
- (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) |
-- (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+ (phy_addr << MDIO_DATA_PMD_SHIFT) |
- (reg << MDIO_DATA_RA_SHIFT) |
- (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
- err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
-@@ -344,18 +243,34 @@ static int b44_readphy(struct b44 *bp, i
- return err;
- }
-
--static int b44_writephy(struct b44 *bp, int reg, u32 val)
-+static int __b44_writephy(struct b44 *bp, int phy_addr, int reg, u32 val)
- {
- bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
- bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
- (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) |
-- (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+ (phy_addr << MDIO_DATA_PMD_SHIFT) |
- (reg << MDIO_DATA_RA_SHIFT) |
- (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) |
- (val & MDIO_DATA_DATA)));
- return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
- }
-
-+static inline int b44_readphy(struct b44 *bp, int reg, u32 *val)
-+{
-+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+ return 0;
-+
-+ return __b44_readphy(bp, bp->phy_addr, reg, val);
-+}
-+
-+static inline int b44_writephy(struct b44 *bp, int reg, u32 val)
-+{
-+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+ return 0;
-+
-+ return __b44_writephy(bp, bp->phy_addr, reg, val);
-+}
-+
- /* miilib interface */
- /* FIXME FIXME: phy_id is ignored, bp->phy_addr use is unconditional
- * due to code existing before miilib use was added to this driver.
-@@ -384,6 +299,8 @@ static int b44_phy_reset(struct b44 *bp)
- u32 val;
- int err;
-
-+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+ return 0;
- err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
- if (err)
- return err;
-@@ -442,11 +359,27 @@ static void b44_set_flow_ctrl(struct b44
- __b44_set_flow_ctrl(bp, pause_enab);
- }
-
-+
-+extern char *nvram_get(char *name); //FIXME: move elsewhere
- static int b44_setup_phy(struct b44 *bp)
- {
- u32 val;
- int err;
-
-+ /*
-+ * workaround for bad hardware design in Linksys WAP54G v1.0
-+ * see https://dev.openwrt.org/ticket/146
-+ * check and reset bit "isolate"
-+ */
-+ if ((atoi(nvram_get("boardnum")) == 2) &&
-+ (__b44_readphy(bp, 0, MII_BMCR, &val) == 0) &&
-+ (val & BMCR_ISOLATE) &&
-+ (__b44_writephy(bp, 0, MII_BMCR, val & ~BMCR_ISOLATE) != 0)) {
-+ printk(KERN_WARNING PFX "PHY: cannot reset MII transceiver isolate bit.\n");
-+ }
-+
-+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+ return 0;
- if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
- goto out;
- if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
-@@ -542,6 +475,19 @@ static void b44_check_phy(struct b44 *bp
- {
- u32 bmsr, aux;
-
-+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) {
-+ bp->flags |= B44_FLAG_100_BASE_T;
-+ bp->flags |= B44_FLAG_FULL_DUPLEX;
-+ if (!netif_carrier_ok(bp->dev)) {
-+ u32 val = br32(bp, B44_TX_CTRL);
-+ val |= TX_CTRL_DUPLEX;
-+ bw32(bp, B44_TX_CTRL, val);
-+ netif_carrier_on(bp->dev);
-+ b44_link_report(bp);
-+ }
-+ return;
-+ }
-+
- if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
- !b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
- (bmsr != 0xffff)) {
-@@ -617,10 +563,10 @@ static void b44_tx(struct b44 *bp)
-
- BUG_ON(skb == NULL);
-
-- pci_unmap_single(bp->pdev,
-+ dma_unmap_single(bp->sdev->dev,
- pci_unmap_addr(rp, mapping),
- skb->len,
-- PCI_DMA_TODEVICE);
-+ DMA_TO_DEVICE);
- rp->skb = NULL;
- dev_kfree_skb_irq(skb);
- }
-@@ -657,9 +603,9 @@ static int b44_alloc_rx_skb(struct b44 *
- if (skb == NULL)
- return -ENOMEM;
-
-- mapping = pci_map_single(bp->pdev, skb->data,
-+ mapping = dma_map_single(bp->sdev->dev, skb->data,
- RX_PKT_BUF_SZ,
-- PCI_DMA_FROMDEVICE);
-+ DMA_FROM_DEVICE);
-
- /* Hardware bug work-around, the chip is unable to do PCI DMA
- to/from anything above 1GB :-( */
-@@ -667,18 +613,18 @@ static int b44_alloc_rx_skb(struct b44 *
- mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
- /* Sigh... */
- if (!dma_mapping_error(mapping))
-- pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
-+ dma_unmap_single(bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
- dev_kfree_skb_any(skb);
- skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA);
- if (skb == NULL)
- return -ENOMEM;
-- mapping = pci_map_single(bp->pdev, skb->data,
-+ mapping = dma_map_single(bp->sdev->dev, skb->data,
- RX_PKT_BUF_SZ,
-- PCI_DMA_FROMDEVICE);
-+ DMA_FROM_DEVICE);
- if (dma_mapping_error(mapping) ||
- mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
- if (!dma_mapping_error(mapping))
-- pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
-+ dma_unmap_single(bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
- dev_kfree_skb_any(skb);
- return -ENOMEM;
- }
-@@ -705,9 +651,9 @@ static int b44_alloc_rx_skb(struct b44 *
- dp->addr = cpu_to_le32((u32) mapping + RX_PKT_OFFSET + bp->dma_offset);
-
- if (bp->flags & B44_FLAG_RX_RING_HACK)
-- b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma,
-- dest_idx * sizeof(dp),
-- DMA_BIDIRECTIONAL);
-+ b44_sync_dma_desc_for_device(bp->sdev, bp->rx_ring_dma,
-+ dest_idx * sizeof(dp),
-+ DMA_BIDIRECTIONAL);
-
- return RX_PKT_BUF_SZ;
- }
-@@ -734,9 +680,9 @@ static void b44_recycle_rx(struct b44 *b
- pci_unmap_addr(src_map, mapping));
-
- if (bp->flags & B44_FLAG_RX_RING_HACK)
-- b44_sync_dma_desc_for_cpu(bp->pdev, bp->rx_ring_dma,
-- src_idx * sizeof(src_desc),
-- DMA_BIDIRECTIONAL);
-+ b44_sync_dma_desc_for_cpu(bp->sdev, bp->rx_ring_dma,
-+ src_idx * sizeof(src_desc),
-+ DMA_BIDIRECTIONAL);
-
- ctrl = src_desc->ctrl;
- if (dest_idx == (B44_RX_RING_SIZE - 1))
-@@ -750,13 +696,13 @@ static void b44_recycle_rx(struct b44 *b
- src_map->skb = NULL;
-
- if (bp->flags & B44_FLAG_RX_RING_HACK)
-- b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma,
-- dest_idx * sizeof(dest_desc),
-- DMA_BIDIRECTIONAL);
-+ b44_sync_dma_desc_for_device(bp->sdev, bp->rx_ring_dma,
-+ dest_idx * sizeof(dest_desc),
-+ DMA_BIDIRECTIONAL);
-
-- pci_dma_sync_single_for_device(bp->pdev, le32_to_cpu(src_desc->addr),
-+ dma_sync_single_for_device(bp->sdev->dev, le32_to_cpu(src_desc->addr),
- RX_PKT_BUF_SZ,
-- PCI_DMA_FROMDEVICE);
-+ DMA_FROM_DEVICE);
- }
-
- static int b44_rx(struct b44 *bp, int budget)
-@@ -776,9 +722,9 @@ static int b44_rx(struct b44 *bp, int bu
- struct rx_header *rh;
- u16 len;
-
-- pci_dma_sync_single_for_cpu(bp->pdev, map,
-+ dma_sync_single_for_cpu(bp->sdev->dev, map,
- RX_PKT_BUF_SZ,
-- PCI_DMA_FROMDEVICE);
-+ DMA_FROM_DEVICE);
- rh = (struct rx_header *) skb->data;
- len = le16_to_cpu(rh->len);
- if ((len > (RX_PKT_BUF_SZ - RX_PKT_OFFSET)) ||
-@@ -810,8 +756,8 @@ static int b44_rx(struct b44 *bp, int bu
- skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
- if (skb_size < 0)
- goto drop_it;
-- pci_unmap_single(bp->pdev, map,
-- skb_size, PCI_DMA_FROMDEVICE);
-+ dma_unmap_single(bp->sdev->dev, map,
-+ skb_size, DMA_FROM_DEVICE);
- /* Leave out rx_header */
- skb_put(skb, len + RX_PKT_OFFSET);
- skb_pull(skb, RX_PKT_OFFSET);
-@@ -982,24 +928,24 @@ static int b44_start_xmit(struct sk_buff
- goto err_out;
- }
-
-- mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
-+ mapping = dma_map_single(bp->sdev->dev, skb->data, len, DMA_TO_DEVICE);
- if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) {
- struct sk_buff *bounce_skb;
-
- /* Chip can't handle DMA to/from >1GB, use bounce buffer */
- if (!dma_mapping_error(mapping))
-- pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
-+ dma_unmap_single(bp->sdev->dev, mapping, len, DMA_TO_DEVICE);
-
- bounce_skb = __dev_alloc_skb(len, GFP_ATOMIC | GFP_DMA);
- if (!bounce_skb)
- goto err_out;
-
-- mapping = pci_map_single(bp->pdev, bounce_skb->data,
-- len, PCI_DMA_TODEVICE);
-+ mapping = dma_map_single(bp->sdev->dev, bounce_skb->data,
-+ len, DMA_TO_DEVICE);
- if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) {
- if (!dma_mapping_error(mapping))
-- pci_unmap_single(bp->pdev, mapping,
-- len, PCI_DMA_TODEVICE);
-+ dma_unmap_single(bp->sdev->dev, mapping,
-+ len, DMA_TO_DEVICE);
- dev_kfree_skb_any(bounce_skb);
- goto err_out;
- }
-@@ -1022,9 +968,9 @@ static int b44_start_xmit(struct sk_buff
- bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset);
-
- if (bp->flags & B44_FLAG_TX_RING_HACK)
-- b44_sync_dma_desc_for_device(bp->pdev, bp->tx_ring_dma,
-- entry * sizeof(bp->tx_ring[0]),
-- DMA_TO_DEVICE);
-+ b44_sync_dma_desc_for_device(bp->sdev, bp->tx_ring_dma,
-+ entry * sizeof(bp->tx_ring[0]),
-+ DMA_TO_DEVICE);
-
- entry = NEXT_TX(entry);
-
-@@ -1097,10 +1043,10 @@ static void b44_free_rings(struct b44 *b
-
- if (rp->skb == NULL)
- continue;
-- pci_unmap_single(bp->pdev,
-+ dma_unmap_single(bp->sdev->dev,
- pci_unmap_addr(rp, mapping),
- RX_PKT_BUF_SZ,
-- PCI_DMA_FROMDEVICE);
-+ DMA_FROM_DEVICE);
- dev_kfree_skb_any(rp->skb);
- rp->skb = NULL;
- }
-@@ -1111,10 +1057,10 @@ static void b44_free_rings(struct b44 *b
-
- if (rp->skb == NULL)
- continue;
-- pci_unmap_single(bp->pdev,
-+ dma_unmap_single(bp->sdev->dev,
- pci_unmap_addr(rp, mapping),
- rp->skb->len,
-- PCI_DMA_TODEVICE);
-+ DMA_TO_DEVICE);
- dev_kfree_skb_any(rp->skb);
- rp->skb = NULL;
- }
-@@ -1136,14 +1082,14 @@ static void b44_init_rings(struct b44 *b
- memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
-
- if (bp->flags & B44_FLAG_RX_RING_HACK)
-- dma_sync_single_for_device(&bp->pdev->dev, bp->rx_ring_dma,
-- DMA_TABLE_BYTES,
-- PCI_DMA_BIDIRECTIONAL);
-+ dma_sync_single_for_device(bp->sdev->dev, bp->rx_ring_dma,
-+ DMA_TABLE_BYTES,
-+ DMA_BIDIRECTIONAL);
-
- if (bp->flags & B44_FLAG_TX_RING_HACK)
-- dma_sync_single_for_device(&bp->pdev->dev, bp->tx_ring_dma,
-- DMA_TABLE_BYTES,
-- PCI_DMA_TODEVICE);
-+ dma_sync_single_for_device(bp->sdev->dev, bp->tx_ring_dma,
-+ DMA_TABLE_BYTES,
-+ DMA_TO_DEVICE);
-
- for (i = 0; i < bp->rx_pending; i++) {
- if (b44_alloc_rx_skb(bp, -1, i) < 0)
-@@ -1163,24 +1109,24 @@ static void b44_free_consistent(struct b
- bp->tx_buffers = NULL;
- if (bp->rx_ring) {
- if (bp->flags & B44_FLAG_RX_RING_HACK) {
-- dma_unmap_single(&bp->pdev->dev, bp->rx_ring_dma,
-- DMA_TABLE_BYTES,
-- DMA_BIDIRECTIONAL);
-+ dma_unmap_single(bp->sdev->dev, bp->rx_ring_dma,
-+ DMA_TABLE_BYTES,
-+ DMA_BIDIRECTIONAL);
- kfree(bp->rx_ring);
- } else
-- pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
-+ dma_free_coherent(bp->sdev->dev, DMA_TABLE_BYTES,
- bp->rx_ring, bp->rx_ring_dma);
- bp->rx_ring = NULL;
- bp->flags &= ~B44_FLAG_RX_RING_HACK;
- }
- if (bp->tx_ring) {
- if (bp->flags & B44_FLAG_TX_RING_HACK) {
-- dma_unmap_single(&bp->pdev->dev, bp->tx_ring_dma,
-- DMA_TABLE_BYTES,
-- DMA_TO_DEVICE);
-+ dma_unmap_single(bp->sdev->dev, bp->tx_ring_dma,
-+ DMA_TABLE_BYTES,
-+ DMA_TO_DEVICE);
- kfree(bp->tx_ring);
- } else
-- pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
-+ dma_free_coherent(bp->sdev->dev, DMA_TABLE_BYTES,
- bp->tx_ring, bp->tx_ring_dma);
- bp->tx_ring = NULL;
- bp->flags &= ~B44_FLAG_TX_RING_HACK;
-@@ -1206,7 +1152,7 @@ static int b44_alloc_consistent(struct b
- goto out_err;
-
- size = DMA_TABLE_BYTES;
-- bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma);
-+ bp->rx_ring = dma_alloc_coherent(bp->sdev->dev, size, &bp->rx_ring_dma, GFP_ATOMIC);
- if (!bp->rx_ring) {
- /* Allocation may have failed due to pci_alloc_consistent
- insisting on use of GFP_DMA, which is more restrictive
-@@ -1218,9 +1164,9 @@ static int b44_alloc_consistent(struct b
- if (!rx_ring)
- goto out_err;
-
-- rx_ring_dma = dma_map_single(&bp->pdev->dev, rx_ring,
-- DMA_TABLE_BYTES,
-- DMA_BIDIRECTIONAL);
-+ rx_ring_dma = dma_map_single(bp->sdev->dev, rx_ring,
-+ DMA_TABLE_BYTES,
-+ DMA_BIDIRECTIONAL);
-
- if (dma_mapping_error(rx_ring_dma) ||
- rx_ring_dma + size > DMA_30BIT_MASK) {
-@@ -1233,9 +1179,9 @@ static int b44_alloc_consistent(struct b
- bp->flags |= B44_FLAG_RX_RING_HACK;
- }
-
-- bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma);
-+ bp->tx_ring = dma_alloc_coherent(bp->sdev->dev, size, &bp->tx_ring_dma, GFP_ATOMIC);
- if (!bp->tx_ring) {
-- /* Allocation may have failed due to pci_alloc_consistent
-+ /* Allocation may have failed due to dma_alloc_coherent
- insisting on use of GFP_DMA, which is more restrictive
- than necessary... */
- struct dma_desc *tx_ring;
-@@ -1245,9 +1191,9 @@ static int b44_alloc_consistent(struct b
- if (!tx_ring)
- goto out_err;
-
-- tx_ring_dma = dma_map_single(&bp->pdev->dev, tx_ring,
-- DMA_TABLE_BYTES,
-- DMA_TO_DEVICE);
-+ tx_ring_dma = dma_map_single(bp->sdev->dev, tx_ring,
-+ DMA_TABLE_BYTES,
-+ DMA_TO_DEVICE);
-
- if (dma_mapping_error(tx_ring_dma) ||
- tx_ring_dma + size > DMA_30BIT_MASK) {
-@@ -1282,7 +1228,9 @@ static void b44_clear_stats(struct b44 *
- /* bp->lock is held. */
- static void b44_chip_reset(struct b44 *bp)
- {
-- if (ssb_is_core_up(bp)) {
-+ struct ssb_device *sdev = bp->sdev;
-+
-+ if (ssb_device_is_enabled(bp->sdev)) {
- bw32(bp, B44_RCV_LAZY, 0);
- bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
- b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 200, 1);
-@@ -1294,19 +1242,24 @@ static void b44_chip_reset(struct b44 *b
- }
- bw32(bp, B44_DMARX_CTRL, 0);
- bp->rx_prod = bp->rx_cons = 0;
-- } else {
-- ssb_pci_setup(bp, (bp->core_unit == 0 ?
-- SBINTVEC_ENET0 :
-- SBINTVEC_ENET1));
- }
-
-- ssb_core_reset(bp);
--
-+ ssb_device_enable(bp->sdev, 0);
- b44_clear_stats(bp);
-
-- /* Make PHY accessible. */
-- bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
-+ switch (sdev->bus->bustype) {
-+ case SSB_BUSTYPE_SSB:
-+ bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
-+ (((ssb_clockspeed(sdev->bus) + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO)
-+ & MDIO_CTRL_MAXF_MASK)));
-+ break;
-+ case SSB_BUSTYPE_PCI:
-+ case SSB_BUSTYPE_PCMCIA:
-+ bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
- (0x0d & MDIO_CTRL_MAXF_MASK)));
-+ break;
-+ }
-+
- br32(bp, B44_MDIO_CTRL);
-
- if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
-@@ -1349,6 +1302,7 @@ static int b44_set_mac_addr(struct net_d
- {
- struct b44 *bp = netdev_priv(dev);
- struct sockaddr *addr = p;
-+ u32 val;
-
- if (netif_running(dev))
- return -EBUSY;
-@@ -1359,7 +1313,11 @@ static int b44_set_mac_addr(struct net_d
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
- spin_lock_irq(&bp->lock);
-- __b44_set_mac_addr(bp);
-+
-+ val = br32(bp, B44_RXCONFIG);
-+ if (!(val & RXCONFIG_CAM_ABSENT))
-+ __b44_set_mac_addr(bp);
-+
- spin_unlock_irq(&bp->lock);
-
- return 0;
-@@ -1445,18 +1403,6 @@ out:
- return err;
- }
-
--#if 0
--/*static*/ void b44_dump_state(struct b44 *bp)
--{
-- u32 val32, val32_2, val32_3, val32_4, val32_5;
-- u16 val16;
--
-- pci_read_config_word(bp->pdev, PCI_STATUS, &val16);
-- printk("DEBUG: PCI status [%04x] \n", val16);
--
--}
--#endif
--
- #ifdef CONFIG_NET_POLL_CONTROLLER
- /*
- * Polling receive - used by netconsole and other diagnostic tools
-@@ -1570,7 +1516,6 @@ static void b44_setup_pseudo_magicp(stru
- static void b44_setup_wol(struct b44 *bp)
- {
- u32 val;
-- u16 pmval;
-
- bw32(bp, B44_RXCONFIG, RXCONFIG_ALLMULTI);
-
-@@ -1594,13 +1539,6 @@ static void b44_setup_wol(struct b44 *bp
- } else {
- b44_setup_pseudo_magicp(bp);
- }
--
-- val = br32(bp, B44_SBTMSLOW);
-- bw32(bp, B44_SBTMSLOW, val | SBTMSLOW_PE);
--
-- pci_read_config_word(bp->pdev, SSB_PMCSR, &pmval);
-- pci_write_config_word(bp->pdev, SSB_PMCSR, pmval | SSB_PE);
--
- }
-
- static int b44_close(struct net_device *dev)
-@@ -1700,7 +1638,7 @@ static void __b44_set_rx_mode(struct net
-
- val = br32(bp, B44_RXCONFIG);
- val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
-- if (dev->flags & IFF_PROMISC) {
-+ if ((dev->flags & IFF_PROMISC) || (val & RXCONFIG_CAM_ABSENT)) {
- val |= RXCONFIG_PROMISC;
- bw32(bp, B44_RXCONFIG, val);
- } else {
-@@ -1747,12 +1685,8 @@ static void b44_set_msglevel(struct net_
-
- static void b44_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
- {
-- struct b44 *bp = netdev_priv(dev);
-- struct pci_dev *pci_dev = bp->pdev;
--
- strcpy (info->driver, DRV_MODULE_NAME);
- strcpy (info->version, DRV_MODULE_VERSION);
-- strcpy (info->bus_info, pci_name(pci_dev));
- }
-
- static int b44_nway_reset(struct net_device *dev)
-@@ -2035,6 +1969,245 @@ static const struct ethtool_ops b44_etht
- .get_ethtool_stats = b44_get_ethtool_stats,
- };
-
-+static int b44_ethtool_ioctl (struct net_device *dev, void __user *useraddr)
-+{
-+ struct b44 *bp = dev->priv;
-+ u32 ethcmd;
-+
-+ if (copy_from_user (&ethcmd, useraddr, sizeof (ethcmd)))
-+ return -EFAULT;
-+
-+ switch (ethcmd) {
-+ case ETHTOOL_GDRVINFO: {
-+ struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
-+ strcpy (info.driver, DRV_MODULE_NAME);
-+ strcpy (info.version, DRV_MODULE_VERSION);
-+ memset(&info.fw_version, 0, sizeof(info.fw_version));
-+ info.eedump_len = 0;
-+ info.regdump_len = 0;
-+ if (copy_to_user (useraddr, &info, sizeof (info)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+
-+ case ETHTOOL_GSET: {
-+ struct ethtool_cmd cmd = { ETHTOOL_GSET };
-+
-+ if (!(bp->flags & B44_FLAG_INIT_COMPLETE))
-+ return -EAGAIN;
-+ cmd.supported = (SUPPORTED_Autoneg);
-+ cmd.supported |= (SUPPORTED_100baseT_Half |
-+ SUPPORTED_100baseT_Full |
-+ SUPPORTED_10baseT_Half |
-+ SUPPORTED_10baseT_Full |
-+ SUPPORTED_MII);
-+
-+ cmd.advertising = 0;
-+ if (bp->flags & B44_FLAG_ADV_10HALF)
-+ cmd.advertising |= ADVERTISE_10HALF;
-+ if (bp->flags & B44_FLAG_ADV_10FULL)
-+ cmd.advertising |= ADVERTISE_10FULL;
-+ if (bp->flags & B44_FLAG_ADV_100HALF)
-+ cmd.advertising |= ADVERTISE_100HALF;
-+ if (bp->flags & B44_FLAG_ADV_100FULL)
-+ cmd.advertising |= ADVERTISE_100FULL;
-+ cmd.advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
-+ cmd.speed = (bp->flags & B44_FLAG_100_BASE_T) ?
-+ SPEED_100 : SPEED_10;
-+ cmd.duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
-+ DUPLEX_FULL : DUPLEX_HALF;
-+ cmd.port = 0;
-+ cmd.phy_address = bp->phy_addr;
-+ cmd.transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ?
-+ XCVR_INTERNAL : XCVR_EXTERNAL;
-+ cmd.autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
-+ AUTONEG_DISABLE : AUTONEG_ENABLE;
-+ cmd.maxtxpkt = 0;
-+ cmd.maxrxpkt = 0;
-+ if (copy_to_user(useraddr, &cmd, sizeof(cmd)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ case ETHTOOL_SSET: {
-+ struct ethtool_cmd cmd;
-+
-+ if (!(bp->flags & B44_FLAG_INIT_COMPLETE))
-+ return -EAGAIN;
-+
-+ if (copy_from_user(&cmd, useraddr, sizeof(cmd)))
-+ return -EFAULT;
-+
-+ /* We do not support gigabit. */
-+ if (cmd.autoneg == AUTONEG_ENABLE) {
-+ if (cmd.advertising &
-+ (ADVERTISED_1000baseT_Half |
-+ ADVERTISED_1000baseT_Full))
-+ return -EINVAL;
-+ } else if ((cmd.speed != SPEED_100 &&
-+ cmd.speed != SPEED_10) ||
-+ (cmd.duplex != DUPLEX_HALF &&
-+ cmd.duplex != DUPLEX_FULL)) {
-+ return -EINVAL;
-+ }
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ if (cmd.autoneg == AUTONEG_ENABLE) {
-+ bp->flags &= ~B44_FLAG_FORCE_LINK;
-+ bp->flags &= ~(B44_FLAG_ADV_10HALF |
-+ B44_FLAG_ADV_10FULL |
-+ B44_FLAG_ADV_100HALF |
-+ B44_FLAG_ADV_100FULL);
-+ if (cmd.advertising & ADVERTISE_10HALF)
-+ bp->flags |= B44_FLAG_ADV_10HALF;
-+ if (cmd.advertising & ADVERTISE_10FULL)
-+ bp->flags |= B44_FLAG_ADV_10FULL;
-+ if (cmd.advertising & ADVERTISE_100HALF)
-+ bp->flags |= B44_FLAG_ADV_100HALF;
-+ if (cmd.advertising & ADVERTISE_100FULL)
-+ bp->flags |= B44_FLAG_ADV_100FULL;
-+ } else {
-+ bp->flags |= B44_FLAG_FORCE_LINK;
-+ if (cmd.speed == SPEED_100)
-+ bp->flags |= B44_FLAG_100_BASE_T;
-+ if (cmd.duplex == DUPLEX_FULL)
-+ bp->flags |= B44_FLAG_FULL_DUPLEX;
-+ }
-+
-+ b44_setup_phy(bp);
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ return 0;
-+ }
-+
-+ case ETHTOOL_GMSGLVL: {
-+ struct ethtool_value edata = { ETHTOOL_GMSGLVL };
-+ edata.data = bp->msg_enable;
-+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ case ETHTOOL_SMSGLVL: {
-+ struct ethtool_value edata;
-+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
-+ return -EFAULT;
-+ bp->msg_enable = edata.data;
-+ return 0;
-+ }
-+ case ETHTOOL_NWAY_RST: {
-+ u32 bmcr;
-+ int r;
-+
-+ spin_lock_irq(&bp->lock);
-+ b44_readphy(bp, MII_BMCR, &bmcr);
-+ b44_readphy(bp, MII_BMCR, &bmcr);
-+ r = -EINVAL;
-+ if (bmcr & BMCR_ANENABLE) {
-+ b44_writephy(bp, MII_BMCR,
-+ bmcr | BMCR_ANRESTART);
-+ r = 0;
-+ }
-+ spin_unlock_irq(&bp->lock);
-+
-+ return r;
-+ }
-+ case ETHTOOL_GLINK: {
-+ struct ethtool_value edata = { ETHTOOL_GLINK };
-+ edata.data = netif_carrier_ok(bp->dev) ? 1 : 0;
-+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ case ETHTOOL_GRINGPARAM: {
-+ struct ethtool_ringparam ering = { ETHTOOL_GRINGPARAM };
-+
-+ ering.rx_max_pending = B44_RX_RING_SIZE - 1;
-+ ering.rx_pending = bp->rx_pending;
-+
-+ /* XXX ethtool lacks a tx_max_pending, oops... */
-+
-+ if (copy_to_user(useraddr, &ering, sizeof(ering)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ case ETHTOOL_SRINGPARAM: {
-+ struct ethtool_ringparam ering;
-+
-+ if (copy_from_user(&ering, useraddr, sizeof(ering)))
-+ return -EFAULT;
-+
-+ if ((ering.rx_pending > B44_RX_RING_SIZE - 1) ||
-+ (ering.rx_mini_pending != 0) ||
-+ (ering.rx_jumbo_pending != 0) ||
-+ (ering.tx_pending > B44_TX_RING_SIZE - 1))
-+ return -EINVAL;
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ bp->rx_pending = ering.rx_pending;
-+ bp->tx_pending = ering.tx_pending;
-+
-+ b44_halt(bp);
-+ b44_init_rings(bp);
-+ b44_init_hw(bp, 1);
-+ netif_wake_queue(bp->dev);
-+ spin_unlock_irq(&bp->lock);
-+
-+ b44_enable_ints(bp);
-+
-+ return 0;
-+ }
-+ case ETHTOOL_GPAUSEPARAM: {
-+ struct ethtool_pauseparam epause = { ETHTOOL_GPAUSEPARAM };
-+
-+ epause.autoneg =
-+ (bp->flags & B44_FLAG_PAUSE_AUTO) != 0;
-+ epause.rx_pause =
-+ (bp->flags & B44_FLAG_RX_PAUSE) != 0;
-+ epause.tx_pause =
-+ (bp->flags & B44_FLAG_TX_PAUSE) != 0;
-+ if (copy_to_user(useraddr, &epause, sizeof(epause)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ case ETHTOOL_SPAUSEPARAM: {
-+ struct ethtool_pauseparam epause;
-+
-+ if (copy_from_user(&epause, useraddr, sizeof(epause)))
-+ return -EFAULT;
-+
-+ spin_lock_irq(&bp->lock);
-+ if (epause.autoneg)
-+ bp->flags |= B44_FLAG_PAUSE_AUTO;
-+ else
-+ bp->flags &= ~B44_FLAG_PAUSE_AUTO;
-+ if (epause.rx_pause)
-+ bp->flags |= B44_FLAG_RX_PAUSE;
-+ else
-+ bp->flags &= ~B44_FLAG_RX_PAUSE;
-+ if (epause.tx_pause)
-+ bp->flags |= B44_FLAG_TX_PAUSE;
-+ else
-+ bp->flags &= ~B44_FLAG_TX_PAUSE;
-+ if (bp->flags & B44_FLAG_PAUSE_AUTO) {
-+ b44_halt(bp);
-+ b44_init_rings(bp);
-+ b44_init_hw(bp, 1);
-+ } else {
-+ __b44_set_flow_ctrl(bp, bp->flags);
-+ }
-+ spin_unlock_irq(&bp->lock);
-+
-+ b44_enable_ints(bp);
-+
-+ return 0;
-+ }
-+ };
-+
-+ return -EOPNOTSUPP;
-+}
-+
- static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- {
- struct mii_ioctl_data *data = if_mii(ifr);
-@@ -2044,40 +2217,64 @@ static int b44_ioctl(struct net_device *
- if (!netif_running(dev))
- goto out;
-
-- spin_lock_irq(&bp->lock);
-- err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
-- spin_unlock_irq(&bp->lock);
--out:
-- return err;
--}
-+ switch (cmd) {
-+ case SIOCETHTOOL:
-+ return b44_ethtool_ioctl(dev, (void __user*) ifr->ifr_data);
-
--/* Read 128-bytes of EEPROM. */
--static int b44_read_eeprom(struct b44 *bp, u8 *data)
--{
-- long i;
-- __le16 *ptr = (__le16 *) data;
-+ case SIOCGMIIPHY:
-+ data->phy_id = bp->phy_addr;
-
-- for (i = 0; i < 128; i += 2)
-- ptr[i / 2] = cpu_to_le16(readw(bp->regs + 4096 + i));
-+ /* fallthru */
-+ case SIOCGMIIREG: {
-+ u32 mii_regval;
-+ spin_lock_irq(&bp->lock);
-+ err = __b44_readphy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
-+ spin_unlock_irq(&bp->lock);
-
-- return 0;
-+ data->val_out = mii_regval;
-+
-+ return err;
-+ }
-+
-+ case SIOCSMIIREG:
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+
-+ spin_lock_irq(&bp->lock);
-+ err = __b44_writephy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
-+ spin_unlock_irq(&bp->lock);
-+
-+ return err;
-+
-+ default:
-+ break;
-+ };
-+ return -EOPNOTSUPP;
-+
-+out:
-+ return err;
- }
-
- static int __devinit b44_get_invariants(struct b44 *bp)
- {
-- u8 eeprom[128];
-- int err;
-+ struct ssb_device *sdev = bp->sdev;
-+ int err = 0;
-+ u8 *addr;
-
-- err = b44_read_eeprom(bp, &eeprom[0]);
-- if (err)
-- goto out;
-+ bp->dma_offset = ssb_dma_translation(sdev);
-
-- bp->dev->dev_addr[0] = eeprom[79];
-- bp->dev->dev_addr[1] = eeprom[78];
-- bp->dev->dev_addr[2] = eeprom[81];
-- bp->dev->dev_addr[3] = eeprom[80];
-- bp->dev->dev_addr[4] = eeprom[83];
-- bp->dev->dev_addr[5] = eeprom[82];
-+ switch (instance) {
-+ case 1:
-+ addr = sdev->bus->sprom.et0mac;
-+ bp->phy_addr = sdev->bus->sprom.et0phyaddr;
-+ break;
-+ default:
-+ addr = sdev->bus->sprom.et1mac;
-+ bp->phy_addr = sdev->bus->sprom.et1phyaddr;
-+ break;
-+ }
-+
-+ memcpy(bp->dev->dev_addr, addr, 6);
-
- if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
- printk(KERN_ERR PFX "Invalid MAC address found in EEPROM\n");
-@@ -2086,103 +2283,52 @@ static int __devinit b44_get_invariants(
-
- memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len);
-
-- bp->phy_addr = eeprom[90] & 0x1f;
--
- bp->imask = IMASK_DEF;
-
-- bp->core_unit = ssb_core_unit(bp);
-- bp->dma_offset = SB_PCI_DMA;
--
- /* XXX - really required?
- bp->flags |= B44_FLAG_BUGGY_TXPTR;
- */
-
-- if (ssb_get_core_rev(bp) >= 7)
-+ if (bp->sdev->id.revision >= 7)
- bp->flags |= B44_FLAG_B0_ANDLATER;
-
--out:
- return err;
- }
-
--static int __devinit b44_init_one(struct pci_dev *pdev,
-- const struct pci_device_id *ent)
-+static int __devinit b44_init_one(struct ssb_device *sdev,
-+ const struct ssb_device_id *ent)
- {
- static int b44_version_printed = 0;
-- unsigned long b44reg_base, b44reg_len;
- struct net_device *dev;
- struct b44 *bp;
- int err, i;
-
-+ instance++;
-+
- if (b44_version_printed++ == 0)
- printk(KERN_INFO "%s", version);
-
-- err = pci_enable_device(pdev);
-- if (err) {
-- dev_err(&pdev->dev, "Cannot enable PCI device, "
-- "aborting.\n");
-- return err;
-- }
--
-- if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-- dev_err(&pdev->dev,
-- "Cannot find proper PCI device "
-- "base address, aborting.\n");
-- err = -ENODEV;
-- goto err_out_disable_pdev;
-- }
--
-- err = pci_request_regions(pdev, DRV_MODULE_NAME);
-- if (err) {
-- dev_err(&pdev->dev,
-- "Cannot obtain PCI resources, aborting.\n");
-- goto err_out_disable_pdev;
-- }
--
-- pci_set_master(pdev);
--
-- err = pci_set_dma_mask(pdev, (u64) DMA_30BIT_MASK);
-- if (err) {
-- dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n");
-- goto err_out_free_res;
-- }
--
-- err = pci_set_consistent_dma_mask(pdev, (u64) DMA_30BIT_MASK);
-- if (err) {
-- dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n");
-- goto err_out_free_res;
-- }
--
-- b44reg_base = pci_resource_start(pdev, 0);
-- b44reg_len = pci_resource_len(pdev, 0);
--
- dev = alloc_etherdev(sizeof(*bp));
- if (!dev) {
-- dev_err(&pdev->dev, "Etherdev alloc failed, aborting.\n");
-+ dev_err(sdev->dev, "Etherdev alloc failed, aborting.\n");
- err = -ENOMEM;
-- goto err_out_free_res;
-+ goto out;
- }
-
- SET_MODULE_OWNER(dev);
-- SET_NETDEV_DEV(dev,&pdev->dev);
-+ SET_NETDEV_DEV(dev,sdev->dev);
-
- /* No interesting netdevice features in this card... */
- dev->features |= 0;
-
- bp = netdev_priv(dev);
-- bp->pdev = pdev;
-+ bp->sdev = sdev;
- bp->dev = dev;
-
- bp->msg_enable = netif_msg_init(b44_debug, B44_DEF_MSG_ENABLE);
-
- spin_lock_init(&bp->lock);
-
-- bp->regs = ioremap(b44reg_base, b44reg_len);
-- if (bp->regs == 0UL) {
-- dev_err(&pdev->dev, "Cannot map device registers, aborting.\n");
-- err = -ENOMEM;
-- goto err_out_free_dev;
-- }
--
- bp->rx_pending = B44_DEF_RX_RING_PENDING;
- bp->tx_pending = B44_DEF_TX_RING_PENDING;
-
-@@ -2201,16 +2347,16 @@ static int __devinit b44_init_one(struct
- dev->poll_controller = b44_poll_controller;
- #endif
- dev->change_mtu = b44_change_mtu;
-- dev->irq = pdev->irq;
-+ dev->irq = sdev->irq;
- SET_ETHTOOL_OPS(dev, &b44_ethtool_ops);
-
- netif_carrier_off(dev);
-
- err = b44_get_invariants(bp);
- if (err) {
-- dev_err(&pdev->dev,
-+ dev_err(sdev->dev,
- "Problem fetching invariants of chip, aborting.\n");
-- goto err_out_iounmap;
-+ goto err_out_free_dev;
- }
-
- bp->mii_if.dev = dev;
-@@ -2229,61 +2375,52 @@ static int __devinit b44_init_one(struct
-
- err = register_netdev(dev);
- if (err) {
-- dev_err(&pdev->dev, "Cannot register net device, aborting.\n");
-- goto err_out_iounmap;
-+ dev_err(sdev->dev, "Cannot register net device, aborting.\n");
-+ goto out;
- }
-
-- pci_set_drvdata(pdev, dev);
--
-- pci_save_state(bp->pdev);
-+ ssb_set_drvdata(sdev, dev);
-
- /* Chip reset provides power to the b44 MAC & PCI cores, which
- * is necessary for MAC register access.
- */
- b44_chip_reset(bp);
-
-- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
-+ printk(KERN_INFO "%s: Broadcom 10/100BaseT Ethernet ", dev->name);
- for (i = 0; i < 6; i++)
- printk("%2.2x%c", dev->dev_addr[i],
- i == 5 ? '\n' : ':');
-
-- return 0;
-+ /* Initialize phy */
-+ spin_lock_irq(&bp->lock);
-+ b44_chip_reset(bp);
-+ spin_unlock_irq(&bp->lock);
-
--err_out_iounmap:
-- iounmap(bp->regs);
-+ return 0;
-
- err_out_free_dev:
- free_netdev(dev);
-
--err_out_free_res:
-- pci_release_regions(pdev);
--
--err_out_disable_pdev:
-- pci_disable_device(pdev);
-- pci_set_drvdata(pdev, NULL);
-+out:
- return err;
- }
-
--static void __devexit b44_remove_one(struct pci_dev *pdev)
-+static void __devexit b44_remove_one(struct ssb_device *pdev)
- {
-- struct net_device *dev = pci_get_drvdata(pdev);
-- struct b44 *bp = netdev_priv(dev);
-+ struct net_device *dev = ssb_get_drvdata(pdev);
-
- unregister_netdev(dev);
-- iounmap(bp->regs);
- free_netdev(dev);
-- pci_release_regions(pdev);
-- pci_disable_device(pdev);
-- pci_set_drvdata(pdev, NULL);
-+ ssb_set_drvdata(pdev, NULL);
- }
-
--static int b44_suspend(struct pci_dev *pdev, pm_message_t state)
-+static int b44_suspend(struct ssb_device *pdev, pm_message_t state)
- {
-- struct net_device *dev = pci_get_drvdata(pdev);
-+ struct net_device *dev = ssb_get_drvdata(pdev);
- struct b44 *bp = netdev_priv(dev);
-
- if (!netif_running(dev))
-- return 0;
-+ return 0;
-
- del_timer_sync(&bp->timer);
-
-@@ -2301,33 +2438,22 @@ static int b44_suspend(struct pci_dev *p
- b44_init_hw(bp, B44_PARTIAL_RESET);
- b44_setup_wol(bp);
- }
-- pci_disable_device(pdev);
-+
- return 0;
- }
-
--static int b44_resume(struct pci_dev *pdev)
-+static int b44_resume(struct ssb_device *pdev)
- {
-- struct net_device *dev = pci_get_drvdata(pdev);
-+ struct net_device *dev = ssb_get_drvdata(pdev);
- struct b44 *bp = netdev_priv(dev);
- int rc = 0;
-
-- pci_restore_state(pdev);
-- rc = pci_enable_device(pdev);
-- if (rc) {
-- printk(KERN_ERR PFX "%s: pci_enable_device failed\n",
-- dev->name);
-- return rc;
-- }
--
-- pci_set_master(pdev);
--
- if (!netif_running(dev))
- return 0;
-
- rc = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev);
- if (rc) {
- printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name);
-- pci_disable_device(pdev);
- return rc;
- }
-
-@@ -2346,29 +2472,31 @@ static int b44_resume(struct pci_dev *pd
- return 0;
- }
-
--static struct pci_driver b44_driver = {
-+static struct ssb_driver b44_driver = {
- .name = DRV_MODULE_NAME,
-- .id_table = b44_pci_tbl,
-+ .id_table = b44_ssb_tbl,
- .probe = b44_init_one,
- .remove = __devexit_p(b44_remove_one),
-- .suspend = b44_suspend,
-- .resume = b44_resume,
-+ .suspend = b44_suspend,
-+ .resume = b44_resume,
- };
-
- static int __init b44_init(void)
- {
- unsigned int dma_desc_align_size = dma_get_cache_alignment();
-
-+ instance = 0;
-+
- /* Setup paramaters for syncing RX/TX DMA descriptors */
- dma_desc_align_mask = ~(dma_desc_align_size - 1);
- dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc));
-
-- return pci_register_driver(&b44_driver);
-+ return ssb_driver_register(&b44_driver);
- }
-
- static void __exit b44_cleanup(void)
- {
-- pci_unregister_driver(&b44_driver);
-+ ssb_driver_unregister(&b44_driver);
- }
-
- module_init(b44_init);
-Index: linux-2.6.23.16/drivers/net/b44.h
-===================================================================
---- linux-2.6.23.16.orig/drivers/net/b44.h 2008-02-19 01:35:58.000000000 +0100
-+++ linux-2.6.23.16/drivers/net/b44.h 2008-02-19 01:36:00.000000000 +0100
-@@ -129,6 +129,7 @@
- #define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */
- #define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */
- #define RXCONFIG_RFILT 0x00000080 /* Reject Filter */
-+#define RXCONFIG_CAM_ABSENT 0x00000100 /* CAM Absent */
- #define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */
- #define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */
- #define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */
-@@ -227,75 +228,9 @@
- #define B44_RX_PAUSE 0x05D4UL /* MIB RX Pause Packets */
- #define B44_RX_NPAUSE 0x05D8UL /* MIB RX Non-Pause Packets */
-
--/* Silicon backplane register definitions */
--#define B44_SBIMSTATE 0x0F90UL /* SB Initiator Agent State */
--#define SBIMSTATE_PC 0x0000000f /* Pipe Count */
--#define SBIMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */
--#define SBIMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */
--#define SBIMSTATE_AP_TS 0x00000010 /* Use timeslices only */
--#define SBIMSTATE_AP_TK 0x00000020 /* Use token only */
--#define SBIMSTATE_AP_RSV 0x00000030 /* Reserved */
--#define SBIMSTATE_IBE 0x00020000 /* In Band Error */
--#define SBIMSTATE_TO 0x00040000 /* Timeout */
--#define B44_SBINTVEC 0x0F94UL /* SB Interrupt Mask */
--#define SBINTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
--#define SBINTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
--#define SBINTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */
--#define SBINTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */
--#define SBINTVEC_USB 0x00000010 /* Enable interrupts for usb */
--#define SBINTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */
--#define SBINTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
--#define B44_SBTMSLOW 0x0F98UL /* SB Target State Low */
--#define SBTMSLOW_RESET 0x00000001 /* Reset */
--#define SBTMSLOW_REJECT 0x00000002 /* Reject */
--#define SBTMSLOW_CLOCK 0x00010000 /* Clock Enable */
--#define SBTMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
--#define SBTMSLOW_PE 0x40000000 /* Power Management Enable */
--#define SBTMSLOW_BE 0x80000000 /* BIST Enable */
--#define B44_SBTMSHIGH 0x0F9CUL /* SB Target State High */
--#define SBTMSHIGH_SERR 0x00000001 /* S-error */
--#define SBTMSHIGH_INT 0x00000002 /* Interrupt */
--#define SBTMSHIGH_BUSY 0x00000004 /* Busy */
--#define SBTMSHIGH_GCR 0x20000000 /* Gated Clock Request */
--#define SBTMSHIGH_BISTF 0x40000000 /* BIST Failed */
--#define SBTMSHIGH_BISTD 0x80000000 /* BIST Done */
--#define B44_SBIDHIGH 0x0FFCUL /* SB Identification High */
--#define SBIDHIGH_RC_MASK 0x0000000f /* Revision Code */
--#define SBIDHIGH_CC_MASK 0x0000fff0 /* Core Code */
--#define SBIDHIGH_CC_SHIFT 4
--#define SBIDHIGH_VC_MASK 0xffff0000 /* Vendor Code */
--#define SBIDHIGH_VC_SHIFT 16
--
--/* SSB PCI config space registers. */
--#define SSB_PMCSR 0x44
--#define SSB_PE 0x100
--#define SSB_BAR0_WIN 0x80
--#define SSB_BAR1_WIN 0x84
--#define SSB_SPROM_CONTROL 0x88
--#define SSB_BAR1_CONTROL 0x8c
--
--/* SSB core and host control registers. */
--#define SSB_CONTROL 0x0000UL
--#define SSB_ARBCONTROL 0x0010UL
--#define SSB_ISTAT 0x0020UL
--#define SSB_IMASK 0x0024UL
--#define SSB_MBOX 0x0028UL
--#define SSB_BCAST_ADDR 0x0050UL
--#define SSB_BCAST_DATA 0x0054UL
--#define SSB_PCI_TRANS_0 0x0100UL
--#define SSB_PCI_TRANS_1 0x0104UL
--#define SSB_PCI_TRANS_2 0x0108UL
--#define SSB_SPROM 0x0800UL
--
--#define SSB_PCI_MEM 0x00000000
--#define SSB_PCI_IO 0x00000001
--#define SSB_PCI_CFG0 0x00000002
--#define SSB_PCI_CFG1 0x00000003
--#define SSB_PCI_PREF 0x00000004
--#define SSB_PCI_BURST 0x00000008
--#define SSB_PCI_MASK0 0xfc000000
--#define SSB_PCI_MASK1 0xfc000000
--#define SSB_PCI_MASK2 0xc0000000
-+#define br32(bp, REG) ssb_read32((bp)->sdev, (REG))
-+#define bw32(bp, REG, VAL) ssb_write32((bp)->sdev, (REG), (VAL))
-+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
-
- /* 4400 PHY registers */
- #define B44_MII_AUXCTRL 24 /* Auxiliary Control */
-@@ -346,10 +281,12 @@ struct rx_header {
-
- struct ring_info {
- struct sk_buff *skb;
-- DECLARE_PCI_UNMAP_ADDR(mapping);
-+ dma_addr_t mapping;
- };
-
- #define B44_MCAST_TABLE_SIZE 32
-+#define B44_PHY_ADDR_NO_PHY 30
-+#define B44_MDC_RATIO 5000000
-
- #define B44_STAT_REG_DECLARE \
- _B44(tx_good_octets) \
-@@ -425,9 +362,10 @@ struct b44 {
-
- u32 dma_offset;
- u32 flags;
--#define B44_FLAG_B0_ANDLATER 0x00000001
-+#define B44_FLAG_INIT_COMPLETE 0x00000001
- #define B44_FLAG_BUGGY_TXPTR 0x00000002
- #define B44_FLAG_REORDER_BUG 0x00000004
-+#define B44_FLAG_B0_ANDLATER 0x00000008
- #define B44_FLAG_PAUSE_AUTO 0x00008000
- #define B44_FLAG_FULL_DUPLEX 0x00010000
- #define B44_FLAG_100_BASE_T 0x00020000
-@@ -450,8 +388,7 @@ struct b44 {
- struct net_device_stats stats;
- struct b44_hw_stats hw_stats;
-
-- void __iomem *regs;
-- struct pci_dev *pdev;
-+ struct ssb_device *sdev;
- struct net_device *dev;
-
- dma_addr_t rx_ring_dma, tx_ring_dma;
-Index: linux-2.6.23.16/drivers/net/Kconfig
-===================================================================
---- linux-2.6.23.16.orig/drivers/net/Kconfig 2008-02-19 01:35:58.000000000 +0100
-+++ linux-2.6.23.16/drivers/net/Kconfig 2008-02-19 01:36:00.000000000 +0100
-@@ -1577,7 +1577,7 @@ config APRICOT
-
- config B44
- tristate "Broadcom 4400 ethernet support"
-- depends on NET_PCI && PCI
-+ depends on SSB && EXPERIMENTAL
- select MII
- help
- If you have a network (Ethernet) controller of this type, say Y and
diff --git a/target/linux/brcm47xx/patches-2.6.25/121-fix_b44_phyaddr.patch b/target/linux/brcm47xx/patches-2.6.25/121-fix_b44_phyaddr.patch
deleted file mode 100644
index c93d517923..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/121-fix_b44_phyaddr.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-Index: linux-2.6.23.16/drivers/net/b44.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/net/b44.c 2008-03-22 19:52:40.000000000 -0700
-+++ linux-2.6.23.16/drivers/net/b44.c 2008-03-22 19:52:41.000000000 -0700
-@@ -2273,6 +2273,10 @@
- bp->phy_addr = sdev->bus->sprom.et1phyaddr;
- break;
- }
-+ /* Some ROMs have buggy PHY addresses with the high
-+ * bits set (sign extension?). Truncate them to a
-+ * valid PHY address. */
-+ bp->phy_addr &= 0x1F;
-
- memcpy(bp->dev->dev_addr, addr, 6);
-
diff --git a/target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch b/target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch
index eea4e26026..ae66ab7a64 100644
--- a/target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch
@@ -1,8 +1,8 @@
-Index: linux-2.6.23/arch/mips/Kconfig
+Index: linux-2.6.25/arch/mips/Kconfig
===================================================================
---- linux-2.6.23.orig/arch/mips/Kconfig 2007-10-13 02:23:41.484492317 +0200
-+++ linux-2.6.23/arch/mips/Kconfig 2007-10-13 02:47:02.784347843 +0200
-@@ -192,7 +192,6 @@
+--- linux-2.6.25.orig/arch/mips/Kconfig 2008-04-26 21:57:10.000000000 +0100
++++ linux-2.6.25/arch/mips/Kconfig 2008-04-26 21:57:13.000000000 +0100
+@@ -228,7 +228,6 @@ config MIPS_MALTA
select I8259
select MIPS_BOARDS_GEN
select MIPS_BONITO64
@@ -10,7 +10,7 @@ Index: linux-2.6.23/arch/mips/Kconfig
select PCI_GT64XXX_PCI0
select MIPS_MSC
select SWAP_IO_SPACE
-@@ -1281,13 +1280,6 @@
+@@ -1421,13 +1420,6 @@ config IP22_CPU_SCACHE
bool
select BOARD_SCACHE
@@ -24,11 +24,11 @@ Index: linux-2.6.23/arch/mips/Kconfig
config R5000_CPU_SCACHE
bool
select BOARD_SCACHE
-Index: linux-2.6.23/arch/mips/kernel/cpu-probe.c
+Index: linux-2.6.25/arch/mips/kernel/cpu-probe.c
===================================================================
---- linux-2.6.23.orig/arch/mips/kernel/cpu-probe.c 2007-10-13 02:23:11.210767122 +0200
-+++ linux-2.6.23/arch/mips/kernel/cpu-probe.c 2007-10-13 02:47:02.788348072 +0200
-@@ -701,6 +701,8 @@
+--- linux-2.6.25.orig/arch/mips/kernel/cpu-probe.c 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/arch/mips/kernel/cpu-probe.c 2008-04-26 21:57:13.000000000 +0100
+@@ -704,6 +704,8 @@ static inline void cpu_probe_mips(struct
break;
case PRID_IMP_25KF:
c->cputype = CPU_25KF;
@@ -37,19 +37,19 @@ Index: linux-2.6.23/arch/mips/kernel/cpu-probe.c
break;
case PRID_IMP_34K:
c->cputype = CPU_34K;
-Index: linux-2.6.23/arch/mips/mm/c-r4k.c
+Index: linux-2.6.25/arch/mips/mm/c-r4k.c
===================================================================
---- linux-2.6.23.orig/arch/mips/mm/c-r4k.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6.23/arch/mips/mm/c-r4k.c 2007-10-13 02:47:02.792348301 +0200
-@@ -1086,7 +1086,6 @@
+--- linux-2.6.25.orig/arch/mips/mm/c-r4k.c 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/arch/mips/mm/c-r4k.c 2008-04-26 22:08:15.000000000 +0100
+@@ -1103,7 +1103,6 @@ static void __init loongson2_sc_init(voi
extern int r5k_sc_init(void);
extern int rm7k_sc_init(void);
-extern int mips_sc_init(void);
- static void __init setup_scache(void)
+ static void __cpuinit setup_scache(void)
{
-@@ -1140,29 +1139,17 @@
+@@ -1157,29 +1156,17 @@ static void __cpuinit setup_scache(void)
#endif
default:
@@ -84,11 +84,11 @@ Index: linux-2.6.23/arch/mips/mm/c-r4k.c
/* compute a couple of other cache variables */
c->scache.waysize = scache_size / c->scache.ways;
-Index: linux-2.6.23/arch/mips/mm/Makefile
+Index: linux-2.6.25/arch/mips/mm/Makefile
===================================================================
---- linux-2.6.23.orig/arch/mips/mm/Makefile 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6.23/arch/mips/mm/Makefile 2007-10-13 02:47:23.393522295 +0200
-@@ -31,6 +31,5 @@
+--- linux-2.6.25.orig/arch/mips/mm/Makefile 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/arch/mips/mm/Makefile 2008-04-26 21:57:13.000000000 +0100
+@@ -32,6 +32,5 @@ obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex-
obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o
obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o
obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
diff --git a/target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch
index d19ba81fad..a5f9a88ced 100644
--- a/target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch
@@ -1,23 +1,23 @@
-Index: linux-2.6.23/arch/mips/kernel/genex.S
+Index: linux-2.6.25/arch/mips/kernel/genex.S
===================================================================
---- linux-2.6.23.orig/arch/mips/kernel/genex.S 2007-10-13 11:29:46.219648163 +0200
-+++ linux-2.6.23/arch/mips/kernel/genex.S 2007-10-13 11:29:49.619841933 +0200
-@@ -51,6 +51,10 @@
+--- linux-2.6.25.orig/arch/mips/kernel/genex.S 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/arch/mips/kernel/genex.S 2008-04-26 21:57:14.000000000 +0100
+@@ -51,6 +51,10 @@ NESTED(except_vec1_generic, 0, sp)
NESTED(except_vec3_generic, 0, sp)
.set push
.set noat
-+#ifdef CONFIG_BCM947XX
++#ifdef CONFIG_BCM47XX
+ nop
+ nop
+#endif
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
#endif
-Index: linux-2.6.23/arch/mips/mm/c-r4k.c
+Index: linux-2.6.25/arch/mips/mm/c-r4k.c
===================================================================
---- linux-2.6.23.orig/arch/mips/mm/c-r4k.c 2007-10-13 11:29:46.227648623 +0200
-+++ linux-2.6.23/arch/mips/mm/c-r4k.c 2007-10-13 11:29:49.619841933 +0200
-@@ -30,6 +30,9 @@
+--- linux-2.6.25.orig/arch/mips/mm/c-r4k.c 2008-04-26 21:57:13.000000000 +0100
++++ linux-2.6.25/arch/mips/mm/c-r4k.c 2008-04-26 21:57:14.000000000 +0100
+@@ -33,6 +33,9 @@
#include <asm/cacheflush.h> /* for run_uncached() */
@@ -27,7 +27,7 @@ Index: linux-2.6.23/arch/mips/mm/c-r4k.c
/*
* Special Variant of smp_call_function for use by cache functions:
*
-@@ -94,6 +97,9 @@
+@@ -97,6 +100,9 @@ static void __cpuinit r4k_blast_dcache_p
{
unsigned long dc_lsize = cpu_dcache_line_size();
@@ -37,7 +37,7 @@ Index: linux-2.6.23/arch/mips/mm/c-r4k.c
if (dc_lsize == 0)
r4k_blast_dcache_page = (void *)cache_noop;
else if (dc_lsize == 16)
-@@ -108,6 +114,9 @@
+@@ -111,6 +117,9 @@ static void __cpuinit r4k_blast_dcache_p
{
unsigned long dc_lsize = cpu_dcache_line_size();
@@ -47,7 +47,7 @@ Index: linux-2.6.23/arch/mips/mm/c-r4k.c
if (dc_lsize == 0)
r4k_blast_dcache_page_indexed = (void *)cache_noop;
else if (dc_lsize == 16)
-@@ -122,6 +131,9 @@
+@@ -125,6 +134,9 @@ static void __cpuinit r4k_blast_dcache_s
{
unsigned long dc_lsize = cpu_dcache_line_size();
@@ -57,7 +57,7 @@ Index: linux-2.6.23/arch/mips/mm/c-r4k.c
if (dc_lsize == 0)
r4k_blast_dcache = (void *)cache_noop;
else if (dc_lsize == 16)
-@@ -623,6 +635,8 @@
+@@ -630,6 +642,8 @@ static void local_r4k_flush_cache_sigtra
unsigned long addr = (unsigned long) arg;
R4600_HIT_CACHEOP_WAR_IMPL;
@@ -66,10 +66,10 @@ Index: linux-2.6.23/arch/mips/mm/c-r4k.c
if (dc_lsize)
protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
if (!cpu_icache_snoops_remote_store && scache_size)
-@@ -1198,6 +1212,17 @@
+@@ -1215,6 +1229,17 @@ static void __cpuinit coherency_setup(vo
* silly idea of putting something else there ...
*/
- switch (current_cpu_data.cputype) {
+ switch (current_cpu_type()) {
+ case CPU_BCM3302:
+ {
+ u32 cm;
@@ -84,12 +84,12 @@ Index: linux-2.6.23/arch/mips/mm/c-r4k.c
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
-@@ -1228,6 +1253,15 @@
- /* Default cache error handler for R4000 and R5000 family */
- set_uncached_handler (0x100, &except_vec2_generic, 0x80);
+@@ -1254,6 +1279,15 @@ void __cpuinit r4k_cache_init(void)
+ break;
+ }
+ /* Check if special workarounds are required */
-+#ifdef CONFIG_BCM947XX
++#ifdef CONFIG_BCM47XX
+ if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & 0xff) == 0) {
+ printk("Enabling BCM4710A0 cache workarounds.\n");
+ bcm4710 = 1;
@@ -100,11 +100,11 @@ Index: linux-2.6.23/arch/mips/mm/c-r4k.c
probe_pcache();
setup_scache();
-@@ -1273,5 +1307,13 @@
+@@ -1303,5 +1337,13 @@ void __cpuinit r4k_cache_init(void)
build_clear_page();
build_copy_page();
local_r4k___flush_cache_all(NULL);
-+#ifdef CONFIG_BCM947XX
++#ifdef CONFIG_BCM47XX
+ {
+ static void (*_coherency_setup)(void);
+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
@@ -114,39 +114,39 @@ Index: linux-2.6.23/arch/mips/mm/c-r4k.c
coherency_setup();
+#endif
}
-Index: linux-2.6.23/arch/mips/mm/tlbex.c
+Index: linux-2.6.25/arch/mips/mm/tlbex.c
===================================================================
---- linux-2.6.23.orig/arch/mips/mm/tlbex.c 2007-10-13 11:29:46.235649074 +0200
-+++ linux-2.6.23/arch/mips/mm/tlbex.c 2007-10-13 11:35:46.076155216 +0200
-@@ -1273,6 +1273,9 @@
- /* No need for i_nop */
+--- linux-2.6.25.orig/arch/mips/mm/tlbex.c 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/arch/mips/mm/tlbex.c 2008-04-26 21:57:14.000000000 +0100
+@@ -677,6 +677,9 @@ static void __cpuinit build_r4000_tlb_re
+ /* No need for uasm_i_nop */
}
-+#ifdef CONFIG_BCM947XX
-+ i_nop(&p);
++#ifdef CONFIG_BCM47XX
++ uasm_i_nop(&p);
+#endif
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
-@@ -1708,6 +1711,9 @@
- struct reloc **r, unsigned int pte,
+@@ -1084,6 +1087,9 @@ build_r4000_tlbchange_handler_head(u32 *
+ struct uasm_reloc **r, unsigned int pte,
unsigned int ptr)
{
-+#ifdef CONFIG_BCM947XX
-+ i_nop(p);
++#ifdef CONFIG_BCM47XX
++ uasm_i_nop(p);
+#endif
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
#else
-Index: linux-2.6.23/include/asm-mips/r4kcache.h
+Index: linux-2.6.25/include/asm-mips/r4kcache.h
===================================================================
---- linux-2.6.23.orig/include/asm-mips/r4kcache.h 2007-10-13 11:29:46.255650214 +0200
-+++ linux-2.6.23/include/asm-mips/r4kcache.h 2007-10-13 11:29:49.631842613 +0200
+--- linux-2.6.25.orig/include/asm-mips/r4kcache.h 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/include/asm-mips/r4kcache.h 2008-04-26 21:57:14.000000000 +0100
@@ -17,6 +17,20 @@
#include <asm/cpu-features.h>
#include <asm/mipsmtregs.h>
-+#ifdef CONFIG_BCM947XX
++#ifdef CONFIG_BCM47XX
+#include <asm/paccess.h>
+#include <linux/ssb/ssb.h>
+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE + SSB_IMSTATE)))
@@ -163,7 +163,7 @@ Index: linux-2.6.23/include/asm-mips/r4kcache.h
/*
* This macro return a properly sign-extended address suitable as base address
* for indexed cache operations. Two issues here:
-@@ -150,6 +164,7 @@
+@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
static inline void flush_dcache_line_indexed(unsigned long addr)
{
__dflush_prologue
@@ -171,7 +171,7 @@ Index: linux-2.6.23/include/asm-mips/r4kcache.h
cache_op(Index_Writeback_Inv_D, addr);
__dflush_epilogue
}
-@@ -169,6 +184,7 @@
+@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
static inline void flush_dcache_line(unsigned long addr)
{
__dflush_prologue
@@ -179,7 +179,7 @@ Index: linux-2.6.23/include/asm-mips/r4kcache.h
cache_op(Hit_Writeback_Inv_D, addr);
__dflush_epilogue
}
-@@ -176,6 +192,7 @@
+@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
static inline void invalidate_dcache_line(unsigned long addr)
{
__dflush_prologue
@@ -187,7 +187,7 @@ Index: linux-2.6.23/include/asm-mips/r4kcache.h
cache_op(Hit_Invalidate_D, addr);
__dflush_epilogue
}
-@@ -208,6 +225,7 @@
+@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
*/
static inline void protected_flush_icache_line(unsigned long addr)
{
@@ -195,7 +195,7 @@ Index: linux-2.6.23/include/asm-mips/r4kcache.h
protected_cache_op(Hit_Invalidate_I, addr);
}
-@@ -219,6 +237,7 @@
+@@ -219,6 +237,7 @@ static inline void protected_flush_icach
*/
static inline void protected_writeback_dcache_line(unsigned long addr)
{
@@ -203,7 +203,7 @@ Index: linux-2.6.23/include/asm-mips/r4kcache.h
protected_cache_op(Hit_Writeback_Inv_D, addr);
}
-@@ -339,8 +358,52 @@
+@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
: "r" (base), \
"i" (op));
@@ -257,23 +257,23 @@ Index: linux-2.6.23/include/asm-mips/r4kcache.h
static inline void blast_##pfx##cache##lsize(void) \
{ \
unsigned long start = INDEX_BASE; \
-@@ -352,6 +415,7 @@
+@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
\
__##pfx##flush_prologue \
\
+ war \
for (ws = 0; ws < ws_end; ws += ws_inc) \
for (addr = start; addr < end; addr += lsize * 32) \
- cache##lsize##_unroll32(addr|ws,indexop); \
-@@ -366,6 +430,7 @@
+ cache##lsize##_unroll32(addr|ws, indexop); \
+@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
\
__##pfx##flush_prologue \
\
+ war \
do { \
- cache##lsize##_unroll32(start,hitop); \
+ cache##lsize##_unroll32(start, hitop); \
start += lsize * 32; \
-@@ -384,6 +449,8 @@
+@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
current_cpu_data.desc.waybit; \
unsigned long ws, addr; \
\
@@ -282,7 +282,7 @@ Index: linux-2.6.23/include/asm-mips/r4kcache.h
__##pfx##flush_prologue \
\
for (ws = 0; ws < ws_end; ws += ws_inc) \
-@@ -393,28 +460,30 @@
+@@ -393,35 +460,37 @@ static inline void blast_##pfx##cache##l
__##pfx##flush_epilogue \
}
@@ -295,6 +295,13 @@ Index: linux-2.6.23/include/asm-mips/r4kcache.h
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
+-
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
@@ -304,6 +311,13 @@ Index: linux-2.6.23/include/asm-mips/r4kcache.h
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
++
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
/* build blast_xxx_range, protected_blast_xxx_range */
-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
@@ -323,7 +337,7 @@ Index: linux-2.6.23/include/asm-mips/r4kcache.h
prot##cache_op(hitop, addr); \
if (addr == aend) \
break; \
-@@ -424,13 +493,13 @@
+@@ -431,13 +500,13 @@ static inline void prot##blast_##pfx##ca
__##pfx##flush_epilogue \
}
@@ -344,15 +358,15 @@ Index: linux-2.6.23/include/asm-mips/r4kcache.h
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
#endif /* _ASM_R4KCACHE_H */
-Index: linux-2.6.23/include/asm-mips/stackframe.h
+Index: linux-2.6.25/include/asm-mips/stackframe.h
===================================================================
---- linux-2.6.23.orig/include/asm-mips/stackframe.h 2007-10-13 11:29:46.263650671 +0200
-+++ linux-2.6.23/include/asm-mips/stackframe.h 2007-10-13 11:33:38.504885346 +0200
-@@ -350,6 +350,10 @@
+--- linux-2.6.25.orig/include/asm-mips/stackframe.h 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/include/asm-mips/stackframe.h 2008-04-26 21:57:14.000000000 +0100
+@@ -359,6 +359,10 @@
.macro RESTORE_SP_AND_RET
LONG_L sp, PT_R29(sp)
.set mips3
-+#ifdef CONFIG_BCM947XX
++#ifdef CONFIG_BCM47XX
+ nop
+ nop
+#endif
diff --git a/target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch
index 8a3bd0ec74..1b50bb3809 100644
--- a/target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch
@@ -1,38 +1,38 @@
-Index: linux-2.6.23/arch/mips/mm/init.c
+Index: linux-2.6.25/arch/mips/mm/init.c
===================================================================
---- linux-2.6.23.orig/arch/mips/mm/init.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6.23/arch/mips/mm/init.c 2007-10-13 02:57:18.483434538 +0200
-@@ -211,7 +211,7 @@
+--- linux-2.6.25.orig/arch/mips/mm/init.c 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/arch/mips/mm/init.c 2008-04-26 22:07:48.000000000 +0100
+@@ -211,7 +211,7 @@ void copy_user_highpage(struct page *to,
void *vfrom, *vto;
vto = kmap_atomic(to, KM_USER1);
-- if (cpu_has_dc_aliases && !Page_dcache_dirty(from)) {
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && !Page_dcache_dirty(from)) {
+- if (cpu_has_dc_aliases &&
++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ page_mapped(from) && !Page_dcache_dirty(from)) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
- kunmap_coherent();
-@@ -234,7 +234,7 @@
+@@ -235,7 +235,7 @@ void copy_to_user_page(struct vm_area_st
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
-- if (cpu_has_dc_aliases) {
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent) {
+- if (cpu_has_dc_aliases &&
++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ page_mapped(page) && !Page_dcache_dirty(page)) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
- kunmap_coherent();
-@@ -250,7 +250,7 @@
+@@ -255,7 +255,7 @@ void copy_from_user_page(struct vm_area_
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
-- if (cpu_has_dc_aliases) {
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent) {
- void *vfrom =
- kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+- if (cpu_has_dc_aliases &&
++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ page_mapped(page) && !Page_dcache_dirty(page)) {
+ void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);
-Index: linux-2.6.23/include/asm-mips/mach-bcm947xx/cpu-feature-overrides.h
+Index: linux-2.6.25/include/asm-mips/mach-bcm47xx/cpu-feature-overrides.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23/include/asm-mips/mach-bcm947xx/cpu-feature-overrides.h 2007-10-13 02:56:22.020216880 +0200
++++ linux-2.6.25/include/asm-mips/mach-bcm47xx/cpu-feature-overrides.h 2008-04-26 21:57:15.000000000 +0100
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
@@ -41,16 +41,16 @@ Index: linux-2.6.23/include/asm-mips/mach-bcm947xx/cpu-feature-overrides.h
+ *
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
-+#ifndef __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H
++#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_use_kmap_coherent 0
+
-+#endif /* __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H */
-Index: linux-2.6.23/include/asm-mips/cpu-features.h
++#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
+Index: linux-2.6.25/include/asm-mips/cpu-features.h
===================================================================
---- linux-2.6.23.orig/include/asm-mips/cpu-features.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6.23/include/asm-mips/cpu-features.h 2007-10-13 02:56:22.028217337 +0200
+--- linux-2.6.25.orig/include/asm-mips/cpu-features.h 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/include/asm-mips/cpu-features.h 2008-04-26 21:57:15.000000000 +0100
@@ -101,6 +101,9 @@
#ifndef cpu_has_pindexed_dcache
#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
diff --git a/target/linux/brcm47xx/patches-2.6.25/170-cpu_wait.patch b/target/linux/brcm47xx/patches-2.6.25/170-cpu_wait.patch
deleted file mode 100644
index 62b3b12b8f..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/170-cpu_wait.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-Index: linux-2.6.23/arch/mips/kernel/cpu-probe.c
-===================================================================
---- linux-2.6.23.orig/arch/mips/kernel/cpu-probe.c 2007-10-13 02:47:02.788348072 +0200
-+++ linux-2.6.23/arch/mips/kernel/cpu-probe.c 2007-10-13 02:57:46.293019312 +0200
-@@ -159,6 +159,7 @@
- case CPU_5KC:
- case CPU_25KF:
- case CPU_PR4450:
-+ case CPU_BCM3302:
- cpu_wait = r4k_wait;
- break;
-
diff --git a/target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch
index 53818aba6d..2e1f77c5d0 100644
--- a/target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.23.16/drivers/ssb/driver_chipcommon.c
+Index: linux-2.6.25/drivers/ssb/driver_chipcommon.c
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_chipcommon.c 2008-02-19 13:46:08.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_chipcommon.c 2008-02-19 13:46:17.000000000 +0100
+--- linux-2.6.25.orig/drivers/ssb/driver_chipcommon.c 2008-04-27 21:36:52.000000000 +0100
++++ linux-2.6.25/drivers/ssb/driver_chipcommon.c 2008-04-27 21:43:50.000000000 +0100
@@ -270,6 +270,8 @@ void ssb_chipco_resume(struct ssb_chipco
void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
u32 *plltype, u32 *n, u32 *m)
@@ -20,11 +20,11 @@ Index: linux-2.6.23.16/drivers/ssb/driver_chipcommon.c
*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
switch (*plltype) {
-Index: linux-2.6.23.16/drivers/ssb/driver_mipscore.c
+Index: linux-2.6.25/drivers/ssb/driver_mipscore.c
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_mipscore.c 2008-02-19 13:46:08.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_mipscore.c 2008-02-19 13:46:17.000000000 +0100
-@@ -160,6 +160,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+--- linux-2.6.25.orig/drivers/ssb/driver_mipscore.c 2008-04-17 03:49:44.000000000 +0100
++++ linux-2.6.25/drivers/ssb/driver_mipscore.c 2008-04-27 21:43:50.000000000 +0100
+@@ -161,6 +161,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
rate = 200000000;
@@ -33,11 +33,11 @@ Index: linux-2.6.23.16/drivers/ssb/driver_mipscore.c
} else {
rate = ssb_calc_clock_rate(pll_type, n, m);
}
-Index: linux-2.6.23.16/drivers/ssb/main.c
+Index: linux-2.6.25/drivers/ssb/main.c
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/main.c 2008-02-19 13:46:08.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/main.c 2008-02-19 13:46:17.000000000 +0100
-@@ -862,6 +862,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+--- linux-2.6.25.orig/drivers/ssb/main.c 2008-04-17 03:49:44.000000000 +0100
++++ linux-2.6.25/drivers/ssb/main.c 2008-04-27 21:43:50.000000000 +0100
+@@ -867,6 +867,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
if (bus->chip_id == 0x5365) {
rate = 100000000;
diff --git a/target/linux/brcm47xx/patches-2.6.25/230-ohci-ssb.patch b/target/linux/brcm47xx/patches-2.6.25/230-ohci-ssb.patch
deleted file mode 100644
index 5be1a66c58..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/230-ohci-ssb.patch
+++ /dev/null
@@ -1,345 +0,0 @@
-From: Michael Buesch <mb@bu3sch.de>
-Date: Wed, 10 Oct 2007 06:47:17 +0000 (-0700)
-Subject: USB: ohci SSB bus glue
-X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fralf%2Flinux.git;a=commitdiff_plain;h=c604e851486eabcbeb73e984279d436ce121fd5d
-
-USB: ohci SSB bus glue
-
-This adds SSB bus glue for the USB OHCI HCD.
-
-Signed-off-by: Michael Buesch <mb@bu3sch.de>
-Signed-off-by: John W. Linville <linville@tuxdriver.com>
-Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
-Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
----
-
-Index: linux-2.6.23.16/drivers/usb/host/Kconfig
-===================================================================
---- linux-2.6.23.16.orig/drivers/usb/host/Kconfig 2008-02-19 00:47:29.000000000 +0100
-+++ linux-2.6.23.16/drivers/usb/host/Kconfig 2008-02-19 00:47:51.000000000 +0100
-@@ -154,6 +154,19 @@ config USB_OHCI_HCD_PCI
- Enables support for PCI-bus plug-in USB controller cards.
- If unsure, say Y.
-
-+config USB_OHCI_HCD_SSB
-+ bool "OHCI support for Broadcom SSB OHCI core"
-+ depends on USB_OHCI_HCD && SSB && EXPERIMENTAL
-+ default n
-+ ---help---
-+ Support for the Sonics Silicon Backplane (SSB) attached
-+ Broadcom USB OHCI core.
-+
-+ This device is present in some embedded devices with
-+ Broadcom based SSB bus.
-+
-+ If unsure, say N.
-+
- config USB_OHCI_BIG_ENDIAN_DESC
- bool
- depends on USB_OHCI_HCD
-Index: linux-2.6.23.16/drivers/usb/host/ohci-hcd.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/usb/host/ohci-hcd.c 2008-02-19 00:47:29.000000000 +0100
-+++ linux-2.6.23.16/drivers/usb/host/ohci-hcd.c 2008-02-19 00:47:51.000000000 +0100
-@@ -926,11 +926,17 @@ MODULE_LICENSE ("GPL");
- #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
- #endif
-
-+#ifdef CONFIG_USB_OHCI_HCD_SSB
-+#include "ohci-ssb.c"
-+#define SSB_OHCI_DRIVER ssb_ohci_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(OF_PLATFORM_DRIVER) && \
- !defined(SA1111_DRIVER) && \
-- !defined(PS3_SYSTEM_BUS_DRIVER)
-+ !defined(PS3_SYSTEM_BUS_DRIVER) && \
-+ !defined(SSB_OHCI_DRIVER)
- #error "missing bus glue for ohci-hcd"
- #endif
-
-@@ -975,10 +981,20 @@ static int __init ohci_hcd_mod_init(void
- goto error_pci;
- #endif
-
-+#ifdef SSB_OHCI_DRIVER
-+ retval = ssb_driver_register(&SSB_OHCI_DRIVER);
-+ if (retval)
-+ goto error_ssb;
-+#endif
-+
- return retval;
-
- /* Error path */
-+#ifdef SSB_OHCI_DRIVER
-+ error_ssb:
-+#endif
- #ifdef PCI_DRIVER
-+ pci_unregister_driver(&PCI_DRIVER);
- error_pci:
- #endif
- #ifdef SA1111_DRIVER
-@@ -1003,6 +1019,9 @@ module_init(ohci_hcd_mod_init);
-
- static void __exit ohci_hcd_mod_exit(void)
- {
-+#ifdef SSB_OHCI_DRIVER
-+ ssb_driver_unregister(&SSB_OHCI_DRIVER);
-+#endif
- #ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
- #endif
-Index: linux-2.6.23.16/drivers/usb/host/ohci-ssb.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.16/drivers/usb/host/ohci-ssb.c 2008-02-19 00:47:51.000000000 +0100
-@@ -0,0 +1,247 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Broadcom USB-core OHCI driver
-+ *
-+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Derived from the USBcore related parts of Broadcom-SB
-+ * Copyright 2005 Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/ssb/ssb.h>
-+
-+
-+#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
-+
-+struct ssb_ohci_device {
-+ struct ohci_hcd ohci; /* _must_ be at the beginning. */
-+
-+ u32 enable_flags;
-+};
-+
-+static inline
-+struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
-+{
-+ return (struct ssb_ohci_device *)(hcd->hcd_priv);
-+}
-+
-+
-+static int ssb_ohci_reset(struct usb_hcd *hcd)
-+{
-+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-+ struct ohci_hcd *ohci = &ohcidev->ohci;
-+ int err;
-+
-+ ohci_hcd_init(ohci);
-+ err = ohci_init(ohci);
-+
-+ return err;
-+}
-+
-+static int ssb_ohci_start(struct usb_hcd *hcd)
-+{
-+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-+ struct ohci_hcd *ohci = &ohcidev->ohci;
-+ int err;
-+
-+ err = ohci_run(ohci);
-+ if (err < 0) {
-+ ohci_err(ohci, "can't start\n");
-+ ohci_stop(hcd);
-+ }
-+
-+ return err;
-+}
-+
-+#ifdef CONFIG_PM
-+static int ssb_ohci_hcd_suspend(struct usb_hcd *hcd, pm_message_t message)
-+{
-+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-+ struct ohci_hcd *ohci = &ohcidev->ohci;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&ohci->lock, flags);
-+
-+ ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-+ ohci_readl(ohci, &ohci->regs->intrdisable); /* commit write */
-+
-+ /* make sure snapshot being resumed re-enumerates everything */
-+ if (message.event == PM_EVENT_PRETHAW)
-+ ohci_usb_reset(ohci);
-+
-+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-+
-+ spin_unlock_irqrestore(&ohci->lock, flags);
-+ return 0;
-+}
-+
-+static int ssb_ohci_hcd_resume(struct usb_hcd *hcd)
-+{
-+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-+ usb_hcd_resume_root_hub(hcd);
-+ return 0;
-+}
-+#endif /* CONFIG_PM */
-+
-+static const struct hc_driver ssb_ohci_hc_driver = {
-+ .description = "ssb-usb-ohci",
-+ .product_desc = "SSB OHCI Controller",
-+ .hcd_priv_size = sizeof(struct ssb_ohci_device),
-+
-+ .irq = ohci_irq,
-+ .flags = HCD_MEMORY | HCD_USB11,
-+
-+ .reset = ssb_ohci_reset,
-+ .start = ssb_ohci_start,
-+ .stop = ohci_stop,
-+ .shutdown = ohci_shutdown,
-+
-+#ifdef CONFIG_PM
-+ .suspend = ssb_ohci_hcd_suspend,
-+ .resume = ssb_ohci_hcd_resume,
-+#endif
-+
-+ .urb_enqueue = ohci_urb_enqueue,
-+ .urb_dequeue = ohci_urb_dequeue,
-+ .endpoint_disable = ohci_endpoint_disable,
-+
-+ .get_frame_number = ohci_get_frame,
-+
-+ .hub_status_data = ohci_hub_status_data,
-+ .hub_control = ohci_hub_control,
-+ .hub_irq_enable = ohci_rhsc_enable,
-+ .bus_suspend = ohci_bus_suspend,
-+ .bus_resume = ohci_bus_resume,
-+
-+ .start_port_reset = ohci_start_port_reset,
-+};
-+
-+static void ssb_ohci_detach(struct ssb_device *dev)
-+{
-+ struct usb_hcd *hcd = ssb_get_drvdata(dev);
-+
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ usb_put_hcd(hcd);
-+ ssb_device_disable(dev, 0);
-+}
-+
-+static int ssb_ohci_attach(struct ssb_device *dev)
-+{
-+ struct ssb_ohci_device *ohcidev;
-+ struct usb_hcd *hcd;
-+ int err = -ENOMEM;
-+ u32 tmp, flags = 0;
-+
-+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
-+ flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-+
-+ ssb_device_enable(dev, flags);
-+
-+ hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
-+ dev->dev->bus_id);
-+ if (!hcd)
-+ goto err_dev_disable;
-+ ohcidev = hcd_to_ssb_ohci(hcd);
-+ ohcidev->enable_flags = flags;
-+
-+ tmp = ssb_read32(dev, SSB_ADMATCH0);
-+ hcd->rsrc_start = ssb_admatch_base(tmp);
-+ hcd->rsrc_len = ssb_admatch_size(tmp);
-+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs)
-+ goto err_put_hcd;
-+ err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
-+ if (err)
-+ goto err_iounmap;
-+
-+ ssb_set_drvdata(dev, hcd);
-+
-+ return err;
-+
-+err_iounmap:
-+ iounmap(hcd->regs);
-+err_put_hcd:
-+ usb_put_hcd(hcd);
-+err_dev_disable:
-+ ssb_device_disable(dev, flags);
-+ return err;
-+}
-+
-+static int ssb_ohci_probe(struct ssb_device *dev,
-+ const struct ssb_device_id *id)
-+{
-+ int err;
-+ u16 chipid_top;
-+
-+ /* USBcores are only connected on embedded devices. */
-+ chipid_top = (dev->bus->chip_id & 0xFF00);
-+ if (chipid_top != 0x4700 && chipid_top != 0x5300)
-+ return -ENODEV;
-+
-+ /* TODO: Probably need checks here; is the core connected? */
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ /* We currently always attach SSB_DEV_USB11_HOSTDEV
-+ * as HOST OHCI. If we want to attach it as Client device,
-+ * we must branch here and call into the (yet to
-+ * be written) Client mode driver. Same for remove(). */
-+
-+ err = ssb_ohci_attach(dev);
-+
-+ return err;
-+}
-+
-+static void ssb_ohci_remove(struct ssb_device *dev)
-+{
-+ ssb_ohci_detach(dev);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
-+{
-+ ssb_device_disable(dev, 0);
-+
-+ return 0;
-+}
-+
-+static int ssb_ohci_resume(struct ssb_device *dev)
-+{
-+ struct usb_hcd *hcd = ssb_get_drvdata(dev);
-+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-+
-+ ssb_device_enable(dev, ohcidev->enable_flags);
-+
-+ return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ssb_ohci_suspend NULL
-+#define ssb_ohci_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct ssb_device_id ssb_ohci_table[] = {
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-+ SSB_DEVTABLE_END
-+};
-+MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
-+
-+static struct ssb_driver ssb_ohci_driver = {
-+ .name = KBUILD_MODNAME,
-+ .id_table = ssb_ohci_table,
-+ .probe = ssb_ohci_probe,
-+ .remove = ssb_ohci_remove,
-+ .suspend = ssb_ohci_suspend,
-+ .resume = ssb_ohci_resume,
-+};
diff --git a/target/linux/brcm47xx/patches-2.6.25/240-ohci-ssb-pm.patch b/target/linux/brcm47xx/patches-2.6.25/240-ohci-ssb-pm.patch
deleted file mode 100644
index 81ba45bee8..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/240-ohci-ssb-pm.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Al Viro <viro@ftp.linux.org.uk>
-Date: Sat, 13 Oct 2007 21:29:47 +0000 (+0100)
-Subject: Fix ohci-ssb with !CONFIG_PM
-X-Git-Tag: linux-2.6.24-rc1~57^2~38
-X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fralf%2Flinux.git;a=commitdiff_plain;h=4735b37cf434175c2b7b36b3b68f1e60e8ec8527;hp=d773b33972a663cfaf066e966f87922a74088a1e
-
-Fix ohci-ssb with !CONFIG_PM
-
-ohci_bus_{suspend,resume} exists only if we have CONFIG_PM; do the same
-thing as other subdrivers...
-
-Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
-
-diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
-index bc3e785..fe70e72 100644
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -117,8 +117,10 @@ static const struct hc_driver ssb_ohci_hc_driver = {
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
-+#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-+#endif
-
- .start_port_reset = ohci_start_port_reset,
- };
diff --git a/target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch b/target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch
index 45493958b2..b4575c43a4 100644
--- a/target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch
@@ -1,6 +1,8 @@
---- a/drivers/usb/host/ohci-ssb.c 2007-11-05 07:56:56.000000000 -0800
-+++ b/drivers/usb/host/ohci-ssb.c 2007-11-05 08:26:15.000000000 -0800
-@@ -142,10 +142,59 @@
+Index: linux-2.6.25/drivers/usb/host/ohci-ssb.c
+===================================================================
+--- linux-2.6.25.orig/drivers/usb/host/ohci-ssb.c 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/drivers/usb/host/ohci-ssb.c 2008-04-26 22:07:53.000000000 +0100
+@@ -142,10 +142,59 @@ static int ssb_ohci_attach(struct ssb_de
int err = -ENOMEM;
u32 tmp, flags = 0;
@@ -62,7 +64,7 @@
hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
dev->dev->bus_id);
-@@ -235,6 +284,7 @@
+@@ -235,6 +284,7 @@ static int ssb_ohci_resume(struct ssb_de
static const struct ssb_device_id ssb_ohci_table[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
diff --git a/target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch b/target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch
index 5c2d5223e9..afeeaa3f49 100644
--- a/target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch
@@ -1,6 +1,8 @@
---- linux-2.6.23.1/drivers/usb/host/ohci-ssb.c 2007-11-26 14:01:22.000000000 -0500
-+++ linux-2.6.23.1.new/drivers/usb/host/ohci-ssb.c 2007-11-26 14:16:08.000000000 -0500
-@@ -195,6 +195,11 @@
+Index: linux-2.6.25/drivers/usb/host/ohci-ssb.c
+===================================================================
+--- linux-2.6.25.orig/drivers/usb/host/ohci-ssb.c 2008-04-26 21:57:17.000000000 +0100
++++ linux-2.6.25/drivers/usb/host/ohci-ssb.c 2008-04-26 21:57:17.000000000 +0100
+@@ -195,6 +195,11 @@ static int ssb_ohci_attach(struct ssb_de
else
ssb_device_enable(dev, 0);
diff --git a/target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch
index 1620bf48ad..a13ba435fa 100644
--- a/target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.23/include/asm-mips/cacheflush.h
+Index: linux-2.6.25/include/asm-mips/cacheflush.h
===================================================================
---- linux-2.6.23.orig/include/asm-mips/cacheflush.h 2007-10-13 11:01:52.780284289 +0200
-+++ linux-2.6.23/include/asm-mips/cacheflush.h 2007-10-13 11:02:16.289624011 +0200
+--- linux-2.6.25.orig/include/asm-mips/cacheflush.h 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/include/asm-mips/cacheflush.h 2008-04-26 21:57:18.000000000 +0100
@@ -32,7 +32,7 @@
extern void (*flush_cache_all)(void);
extern void (*__flush_cache_all)(void);
diff --git a/target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch b/target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch
index 16e7e3f36c..c43332b547 100644
--- a/target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch
@@ -1,8 +1,8 @@
-Index: linux-2.6.23/arch/mips/mm/init.c
+Index: linux-2.6.25/arch/mips/mm/init.c
===================================================================
---- linux-2.6.23.orig/arch/mips/mm/init.c 2007-10-13 11:46:58.762489429 +0200
-+++ linux-2.6.23/arch/mips/mm/init.c 2007-10-13 11:47:36.092616749 +0200
-@@ -205,31 +205,6 @@
+--- linux-2.6.25.orig/arch/mips/mm/init.c 2008-04-26 21:57:15.000000000 +0100
++++ linux-2.6.25/arch/mips/mm/init.c 2008-04-26 21:57:19.000000000 +0100
+@@ -205,32 +205,6 @@ void kunmap_coherent(void)
preempt_check_resched();
}
@@ -12,7 +12,8 @@ Index: linux-2.6.23/arch/mips/mm/init.c
- void *vfrom, *vto;
-
- vto = kmap_atomic(to, KM_USER1);
-- if (cpu_has_dc_aliases && cpu_use_kmap_coherent && !Page_dcache_dirty(from)) {
+- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+- page_mapped(from) && !Page_dcache_dirty(from)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
- kunmap_coherent();
@@ -34,11 +35,11 @@ Index: linux-2.6.23/arch/mips/mm/init.c
void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
-Index: linux-2.6.23/include/asm-mips/page.h
+Index: linux-2.6.25/include/asm-mips/page.h
===================================================================
---- linux-2.6.23.orig/include/asm-mips/page.h 2007-10-13 11:45:50.518600430 +0200
-+++ linux-2.6.23/include/asm-mips/page.h 2007-10-13 11:47:26.472068504 +0200
-@@ -35,6 +35,7 @@
+--- linux-2.6.25.orig/include/asm-mips/page.h 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/include/asm-mips/page.h 2008-04-26 21:57:19.000000000 +0100
+@@ -32,6 +32,7 @@
#ifndef __ASSEMBLY__
#include <linux/pfn.h>
@@ -46,7 +47,7 @@ Index: linux-2.6.23/include/asm-mips/page.h
#include <asm/io.h>
/*
-@@ -67,13 +68,16 @@
+@@ -64,13 +65,16 @@ static inline void clear_user_page(void
flush_data_cache_page((unsigned long)addr);
}
diff --git a/target/linux/brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch
new file mode 100644
index 0000000000..df041da653
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch
@@ -0,0 +1,384 @@
+Index: linux-2.6.25.1/arch/mips/bcm47xx/irq.c
+===================================================================
+--- linux-2.6.25.1.orig/arch/mips/bcm47xx/irq.c 2008-05-14 14:36:58.000000000 +0100
++++ linux-2.6.25.1/arch/mips/bcm47xx/irq.c 2008-05-14 14:37:06.000000000 +0100
+@@ -1,5 +1,6 @@
+ /*
+ * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
++ * Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+@@ -23,10 +24,19 @@
+ */
+
+ #include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/init.h>
+ #include <linux/interrupt.h>
+ #include <linux/irq.h>
++#include <linux/pci.h>
++#include <linux/ssb/ssb.h>
++
+ #include <asm/irq_cpu.h>
+
++
++extern struct ssb_bus ssb_bcm47xx;
++
++
+ void plat_irq_dispatch(void)
+ {
+ u32 cause;
+@@ -53,3 +63,19 @@ void __init arch_init_irq(void)
+ {
+ mips_cpu_irq_init();
+ }
++
++int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ int res;
++
++ res = ssb_pcibios_map_irq(dev, slot, pin);
++ if (res < 0) {
++ printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
++ dev->dev.bus_id);
++ return 0;
++ }
++ /* IRQ-0 and IRQ-1 are software interrupts. */
++ WARN_ON((res == 0) || (res == 1));
++
++ return res;
++}
+Index: linux-2.6.25.1/arch/mips/bcm47xx/setup.c
+===================================================================
+--- linux-2.6.25.1.orig/arch/mips/bcm47xx/setup.c 2008-05-14 14:36:58.000000000 +0100
++++ linux-2.6.25.1/arch/mips/bcm47xx/setup.c 2008-05-14 14:37:06.000000000 +0100
+@@ -2,7 +2,7 @@
+ * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
+ * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+- * Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
++ * Copyright (C) 2006-2008 Michael Buesch <mb@bu3sch.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+@@ -25,23 +25,52 @@
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
++#include <linux/init.h>
+ #include <linux/types.h>
+-#include <linux/ssb/ssb.h>
++#include <linux/tty.h>
++#include <linux/serial.h>
++#include <linux/serial_core.h>
++#include <linux/serial_reg.h>
++#include <linux/serial_8250.h>
+ #include <asm/bootinfo.h>
+-#include <asm/reboot.h>
+ #include <asm/time.h>
+-#include <bcm47xx.h>
++#include <asm/reboot.h>
+ #include <asm/fw/cfe/cfe_api.h>
++#include <linux/pm.h>
++#include <linux/ssb/ssb.h>
++#include <linux/ssb/ssb_embedded.h>
++
++#include "include/nvram.h"
+
+ struct ssb_bus ssb_bcm47xx;
+ EXPORT_SYMBOL(ssb_bcm47xx);
+
++extern void bcm47xx_pci_init(void);
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ int err;
++
++ err = ssb_pcibios_plat_dev_init(dev);
++ if (err) {
++ printk(KERN_ALERT "PCI: Failed to init device %s\n",
++ pci_name(dev));
++ }
++
++ return err;
++}
++
+ static void bcm47xx_machine_restart(char *command)
+ {
+ printk(KERN_ALERT "Please stand by while rebooting the system...\n");
+ local_irq_disable();
++ /* CFE has a reboot callback, but that does not work.
++ * Oopses with: Reserved instruction in kernel code.
++ */
++
+ /* Set the watchdog timer to reset immediately */
+- ssb_chipco_watchdog_timer_set(&ssb_bcm47xx.chipco, 1);
++ if (ssb_watchdog_timer_set(&ssb_bcm47xx, 1))
++ printk(KERN_EMERG "SSB watchdog-triggered reboot failed!\n");
+ while (1)
+ cpu_relax();
+ }
+@@ -50,12 +79,13 @@ static void bcm47xx_machine_halt(void)
+ {
+ /* Disable interrupts and watchdog and spin forever */
+ local_irq_disable();
+- ssb_chipco_watchdog_timer_set(&ssb_bcm47xx.chipco, 0);
++ if (ssb_watchdog_timer_set(&ssb_bcm47xx, 0))
++ printk(KERN_EMERG "Failed to disable SSB watchdog!\n");
+ while (1)
+ cpu_relax();
+ }
+
+-static void str2eaddr(char *str, char *dest)
++static void e_aton(char *str, char *dest)
+ {
+ int i = 0;
+
+@@ -72,52 +102,141 @@ static void str2eaddr(char *str, char *d
+ }
+ }
+
+-static int bcm47xx_get_invariants(struct ssb_bus *bus,
+- struct ssb_init_invariants *iv)
++static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
+ {
+- char buf[100];
++ char *s;
+
+- /* Fill boardinfo structure */
+- memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
++ memset(sprom, 0xFF, sizeof(struct ssb_sprom));
+
+- if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+- if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
+- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+- if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
+- iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
+-
+- /* Fill sprom structure */
+- memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
+- iv->sprom.revision = 3;
+-
+- if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+- str2eaddr(buf, iv->sprom.et0mac);
+- if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+- str2eaddr(buf, iv->sprom.et1mac);
+- if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+- iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
+- if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+- iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
+- if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+- iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
+- if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+- iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
++ sprom->revision = 1;
++ if ((s = nvram_get("il0macaddr")))
++ e_aton(s, sprom->il0mac);
++ if ((s = nvram_get("et0macaddr")))
++ e_aton(s, sprom->et0mac);
++ if ((s = nvram_get("et1macaddr")))
++ e_aton(s, sprom->et1mac);
++ if ((s = nvram_get("et0phyaddr")))
++ sprom->et0phyaddr = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("et1phyaddr")))
++ sprom->et1phyaddr = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("et0mdcport")))
++ sprom->et0mdcport = !!simple_strtoul(s, NULL, 10);
++ if ((s = nvram_get("et1mdcport")))
++ sprom->et1mdcport = !!simple_strtoul(s, NULL, 10);
++ if ((s = nvram_get("pa0b0")))
++ sprom->pa0b0 = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("pa0b1")))
++ sprom->pa0b1 = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("pa0b2")))
++ sprom->pa0b2 = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("pa1b0")))
++ sprom->pa1b0 = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("pa1b1")))
++ sprom->pa1b1 = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("pa1b2")))
++ sprom->pa1b2 = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("wl0gpio0")))
++ sprom->gpio0 = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("wl0gpio1")))
++ sprom->gpio1 = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("wl0gpio2")))
++ sprom->gpio2 = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("wl0gpio3")))
++ sprom->gpio3 = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("pa0maxpwr")))
++ sprom->maxpwr_bg = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("pa1maxpwr")))
++ sprom->maxpwr_a = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("pa0itssit")))
++ sprom->itssi_bg = simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("pa1itssit")))
++ sprom->itssi_a = simple_strtoul(s, NULL, 0);
++ sprom->boardflags_lo = 0;
++ if ((s = nvram_get("boardflags")))
++ sprom->boardflags_lo = simple_strtoul(s, NULL, 0);
++ sprom->boardflags_hi = 0;
++ if ((s = nvram_get("boardflags2")))
++ sprom->boardflags_hi = simple_strtoul(s, NULL, 0);
++}
++
++static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv)
++{
++ char *s;
++
++ iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
++ if ((s = nvram_get("boardtype")))
++ iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0);
++ if ((s = nvram_get("boardrev")))
++ iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0);
++
++ bcm47xx_fill_sprom(&iv->sprom);
++
++ if ((s = nvram_get("cardbus")))
++ iv->has_cardbus_slot = !!simple_strtoul(s, NULL, 10);
+
+ return 0;
+ }
+
+ void __init plat_mem_setup(void)
+ {
+- int err;
++ int i, err;
++ char *s;
++ struct ssb_mipscore *mcore;
++
++ err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants);
++ if (err) {
++ const char *msg = "Failed to initialize SSB bus (err %d)\n";
++ printk(msg, err); /* Make sure the message gets out of the box. */
++ panic(msg, err);
++ }
++ mcore = &ssb_bcm47xx.mipscore;
++
++ s = nvram_get("kernel_args");
++ if (s && !strncmp(s, "console=ttyS1", 13)) {
++ struct ssb_serial_port port;
++
++ printk("Swapping serial ports!\n");
++ /* swap serial ports */
++ memcpy(&port, &mcore->serial_ports[0], sizeof(port));
++ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port));
++ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
++ }
+
+- err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
+- bcm47xx_get_invariants);
+- if (err)
+- panic("Failed to initialize SSB bus (err %d)\n", err);
++ for (i = 0; i < mcore->nr_serial_ports; i++) {
++ struct ssb_serial_port *port = &(mcore->serial_ports[i]);
++ struct uart_port s;
++
++ memset(&s, 0, sizeof(s));
++ s.line = i;
++ s.membase = port->regs;
++ s.irq = port->irq + 2;
++ s.uartclk = port->baud_base;
++ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
++ s.iotype = SERIAL_IO_MEM;
++ s.regshift = port->reg_shift;
++
++ early_serial_setup(&s);
++ }
++ printk("Serial init done.\n");
+
+ _machine_restart = bcm47xx_machine_restart;
+ _machine_halt = bcm47xx_machine_halt;
+ pm_power_off = bcm47xx_machine_halt;
+ }
+
++static int __init bcm47xx_register_gpiodev(void)
++{
++ static struct resource res = {
++ .start = 0xFFFFFFFF,
++ };
++ struct platform_device *pdev;
++
++ pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
++ if (!pdev) {
++ printk(KERN_ERR "bcm47xx: GPIODEV init failed\n");
++ return -ENODEV;
++ }
++
++ return 0;
++}
++device_initcall(bcm47xx_register_gpiodev);
+Index: linux-2.6.25.1/arch/mips/bcm47xx/time.c
+===================================================================
+--- linux-2.6.25.1.orig/arch/mips/bcm47xx/time.c 2008-05-14 14:36:58.000000000 +0100
++++ linux-2.6.25.1/arch/mips/bcm47xx/time.c 2008-05-14 14:37:06.000000000 +0100
+@@ -22,11 +22,17 @@
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+-
+ #include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/serial_reg.h>
++#include <linux/interrupt.h>
+ #include <linux/ssb/ssb.h>
++#include <asm/addrspace.h>
++#include <asm/io.h>
+ #include <asm/time.h>
+-#include <bcm47xx.h>
++
++extern struct ssb_bus ssb_bcm47xx;
+
+ void __init plat_time_init(void)
+ {
+Index: linux-2.6.25.1/arch/mips/bcm47xx/nvram.c
+===================================================================
+--- linux-2.6.25.1.orig/arch/mips/bcm47xx/nvram.c 2008-05-14 14:36:58.000000000 +0100
++++ linux-2.6.25.1/arch/mips/bcm47xx/nvram.c 2008-05-14 14:37:06.000000000 +0100
+@@ -24,10 +24,10 @@
+ #include <asm/io.h>
+ #include <asm/uaccess.h>
+
+-#include <nvram.h>
++#include "include/nvram.h"
+
+ #define MB * 1048576
+-extern struct ssb_bus ssb;
++extern struct ssb_bus ssb_bcm47xx;
+
+ static char nvram_buf[NVRAM_SPACE];
+ static int cfe_env;
+@@ -36,7 +36,7 @@ extern char *cfe_env_get(char *nv_buf, c
+ /* Probe for NVRAM header */
+ static void __init early_nvram_init(void)
+ {
+- struct ssb_mipscore *mcore = &ssb.mipscore;
++ struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+ struct nvram_header *header;
+ int i;
+ u32 base, lim, off;
+Index: linux-2.6.25.1/arch/mips/bcm47xx/Makefile
+===================================================================
+--- linux-2.6.25.1.orig/arch/mips/bcm47xx/Makefile 2008-05-14 14:36:58.000000000 +0100
++++ linux-2.6.25.1/arch/mips/bcm47xx/Makefile 2008-05-14 14:37:06.000000000 +0100
+@@ -3,4 +3,4 @@
+ # under Linux.
+ #
+
+-obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
++obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
+Index: linux-2.6.25.1/arch/mips/Kconfig
+===================================================================
+--- linux-2.6.25.1.orig/arch/mips/Kconfig 2008-05-14 14:47:43.000000000 +0100
++++ linux-2.6.25.1/arch/mips/Kconfig 2008-05-14 14:48:15.000000000 +0100
+@@ -54,6 +54,7 @@ config BCM47XX
+ select SSB_DRIVER_MIPS
+ select SSB_DRIVER_EXTIF
+ select SSB_DRIVER_PCICORE
++ select SSB_B43_PCI_BRIDGE
+ select SSB_PCICORE_HOSTMODE if PCI
+ select GENERIC_GPIO
+ select SYS_HAS_EARLY_PRINTK
diff --git a/target/linux/brcm47xx/patches-2.6.25/410-aec62xx_pci_enable.patch b/target/linux/brcm47xx/patches-2.6.25/410-aec62xx_pci_enable.patch
deleted file mode 100644
index ae2be766f9..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/410-aec62xx_pci_enable.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-diff -Naur a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
---- a/drivers/ide/pci/aec62xx.c 2007-10-12 18:43:44.000000000 +0200
-+++ b/drivers/ide/pci/aec62xx.c 2007-11-14 14:12:51.000000000 +0100
-@@ -248,7 +248,14 @@
-
- static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d)
- {
-- unsigned long dma_base = pci_resource_start(dev, 4);
-+ unsigned long dma_base;
-+ int err;
-+
-+ err = pci_enable_device(dev);
-+ if (err)
-+ return err;
-+
-+ dma_base = pci_resource_start(dev, 4);
-
- if (inb(dma_base + 2) & 0x10) {
- d->name = (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) ?
-@@ -256,7 +263,11 @@
- d->udma_mask = 0x7f; /* udma0-6 */
- }
-
-- return ide_setup_pci_device(dev, d);
-+ err = ide_setup_pci_device(dev, d);
-+ if(err)
-+ pci_disable_device(dev);
-+
-+ return err;
- }
-
- static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
diff --git a/target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch b/target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch
index b545bba264..59c1d1d754 100644
--- a/target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch
@@ -1,8 +1,8 @@
-Index: linux-2.6.23.1/scripts/gen_initramfs_list.sh
+Index: linux-2.6.25/scripts/gen_initramfs_list.sh
===================================================================
---- linux-2.6.23.1.orig/scripts/gen_initramfs_list.sh 2007-11-16 02:26:47.821227881 +0100
-+++ linux-2.6.23.1/scripts/gen_initramfs_list.sh 2007-11-16 02:45:42.753904007 +0100
-@@ -287,7 +287,7 @@
+--- linux-2.6.25.orig/scripts/gen_initramfs_list.sh 2008-04-26 21:57:00.000000000 +0100
++++ linux-2.6.25/scripts/gen_initramfs_list.sh 2008-04-26 21:57:20.000000000 +0100
+@@ -287,7 +287,7 @@ if [ ! -z ${output_file} ]; then
if [ "${is_cpio_compressed}" = "compressed" ]; then
cat ${cpio_tfile} > ${output_file}
else
@@ -11,11 +11,11 @@ Index: linux-2.6.23.1/scripts/gen_initramfs_list.sh
fi
[ -z ${cpio_file} ] && rm ${cpio_tfile}
fi
-Index: linux-2.6.23.1/init/initramfs.c
+Index: linux-2.6.25/init/initramfs.c
===================================================================
---- linux-2.6.23.1.orig/init/initramfs.c 2007-11-16 02:26:47.829228332 +0100
-+++ linux-2.6.23.1/init/initramfs.c 2007-11-16 03:03:09.661563882 +0100
-@@ -441,6 +441,69 @@
+--- linux-2.6.25.orig/init/initramfs.c 2008-04-26 21:56:21.000000000 +0100
++++ linux-2.6.25/init/initramfs.c 2008-04-26 21:57:20.000000000 +0100
+@@ -441,6 +441,69 @@ static void __init flush_window(void)
outcnt = 0;
}
@@ -85,7 +85,7 @@ Index: linux-2.6.23.1/init/initramfs.c
static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only)
{
int written;
-@@ -475,12 +538,28 @@
+@@ -475,12 +538,28 @@ static char * __init unpack_to_rootfs(ch
inptr = 0;
outcnt = 0; /* bytes in output buffer */
bytes_out = 0;
diff --git a/target/linux/brcm47xx/patches-2.6.25/600-ssb-fix-pcidevices.patch b/target/linux/brcm47xx/patches-2.6.25/600-ssb-fix-pcidevices.patch
deleted file mode 100644
index 01bd9ffea2..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/600-ssb-fix-pcidevices.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-Index: linux-2.6.23.16/drivers/ssb/driver_pcicore.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_pcicore.c 2008-02-16 17:55:20.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_pcicore.c 2008-02-16 17:55:35.000000000 +0100
-@@ -66,6 +66,7 @@ int pcibios_plat_dev_init(struct pci_dev
- base = &ssb_pcicore_pcibus_iobase;
- else
- base = &ssb_pcicore_pcibus_membase;
-+ res->flags |= IORESOURCE_PCI_FIXED;
- if (res->end) {
- size = res->end - res->start + 1;
- if (*base & (size - 1))
-@@ -88,10 +89,12 @@ int pcibios_plat_dev_init(struct pci_dev
-
- static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
- {
-+ u8 lat;
-+
- if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
- return;
-
-- ssb_printk(KERN_INFO "PCI: fixing up bridge\n");
-+ ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
-
- /* Enable PCI bridge bus mastering and memory space */
- pci_set_master(dev);
-@@ -101,7 +104,10 @@ static void __init ssb_fixup_pcibridge(s
- pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
-
- /* Make sure our latency is high enough to handle the devices behind us */
-- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8);
-+ lat = 168;
-+ ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
-+ pci_name(dev), lat);
-+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
- }
- DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
-
-@@ -279,14 +285,14 @@ static struct resource ssb_pcicore_mem_r
- .name = "SSB PCIcore external memory",
- .start = SSB_PCI_DMA,
- .end = SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1,
-- .flags = IORESOURCE_MEM,
-+ .flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED,
- };
-
- static struct resource ssb_pcicore_io_resource = {
- .name = "SSB PCIcore external I/O",
- .start = 0x100,
- .end = 0x7FF,
-- .flags = IORESOURCE_IO,
-+ .flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED,
- };
-
- static struct pci_controller ssb_pcicore_controller = {
-@@ -344,7 +350,8 @@ static void ssb_pcicore_init_hostmode(st
- /* Ok, ready to run, register it to the system.
- * The following needs change, if we want to port hostmode
- * to non-MIPS platform. */
-- set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000));
-+ ssb_pcicore_controller.io_map_base = (unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000);
-+ set_io_port_base(ssb_pcicore_controller.io_map_base);
- /* Give some time to the PCI controller to configure itself with the new
- * values. Not waiting at this point causes crashes of the machine. */
- mdelay(10);
diff --git a/target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch b/target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch
index 8ab28a75e2..aa3ac25168 100644
--- a/target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch
@@ -2,20 +2,23 @@ The SSB pcicore driver does create some MMIO resource collisions.
However, the pcicore PCI-fixup routine fixes these collisions afterwards.
Remove this sanity check for now until we find a better solution.
--mb
-Index: linux-2.6.23.16/arch/mips/pci/pci.c
+Index: linux-2.6.25.1/arch/mips/pci/pci.c
===================================================================
---- linux-2.6.23.16.orig/arch/mips/pci/pci.c 2008-02-16 17:55:20.000000000 +0100
-+++ linux-2.6.23.16/arch/mips/pci/pci.c 2008-02-16 17:57:39.000000000 +0100
-@@ -177,10 +177,8 @@ static int pcibios_enable_resources(stru
+--- linux-2.6.25.1.orig/arch/mips/pci/pci.c 2008-05-08 22:37:55.000000000 +0100
++++ linux-2.6.25.1/arch/mips/pci/pci.c 2008-05-09 07:39:55.000000000 +0100
+@@ -182,12 +182,10 @@ static int pcibios_enable_resources(stru
+ if ((idx == PCI_ROM_RESOURCE) &&
+ (!(r->flags & IORESOURCE_ROM_ENABLE)))
continue;
-
- r = &dev->resource[idx];
- if (!r->start && r->end) {
-- printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+- printk(KERN_ERR "PCI: Device %s not available "
+- "because of resource collisions\n",
++ if (!r->start && r->end)
++ printk(KERN_WARNING "PCI: Device %s resource"
++ "collisions detected. Ignoring...\n",
+ pci_name(dev));
- return -EINVAL;
- }
-+ if (!r->start && r->end)
-+ printk(KERN_WARNING "PCI: Device %s resource collisions detected. Ignoring...\n", pci_name(dev));
if (r->flags & IORESOURCE_IO)
cmd |= PCI_COMMAND_IO;
if (r->flags & IORESOURCE_MEM)
diff --git a/target/linux/brcm47xx/patches-2.6.25/602-ssb-fix-serial-on-new-devices.patch b/target/linux/brcm47xx/patches-2.6.25/602-ssb-fix-serial-on-new-devices.patch
deleted file mode 100644
index d80b86e78a..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/602-ssb-fix-serial-on-new-devices.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-Index: linux-2.6.23.16/drivers/ssb/driver_chipcommon.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_chipcommon.c 2008-02-19 14:37:26.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_chipcommon.c 2008-02-19 14:37:27.000000000 +0100
-@@ -403,6 +403,7 @@ int ssb_chipco_serial_init(struct ssb_ch
- unsigned int irq;
- u32 baud_base, div;
- u32 i, n;
-+ unsigned int ccrev = cc->dev->id.revision;
-
- plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- irq = ssb_mips_irq(cc->dev);
-@@ -414,14 +415,39 @@ int ssb_chipco_serial_init(struct ssb_ch
- chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
- div = 1;
- } else {
-- if (cc->dev->id.revision >= 11) {
-+ if (ccrev == 20) {
-+ /* BCM5354 uses constant 25MHz clock */
-+ baud_base = 25000000;
-+ div = 48;
-+ /* Set the override bit so we don't divide it */
-+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
-+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
-+ | SSB_CHIPCO_CORECTL_UARTCLK0);
-+ } else if ((ccrev >= 11) && (ccrev != 15)) {
- /* Fixed ALP clock */
- baud_base = 20000000;
-+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
-+ /* FIXME: baud_base is different for devices with a PMU */
-+ SSB_WARN_ON(1);
-+ }
- div = 1;
-+ if (ccrev >= 21) {
-+ /* Turn off UART clock before switching clocksource. */
-+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
-+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
-+ & ~SSB_CHIPCO_CORECTL_UARTCLKEN);
-+ }
- /* Set the override bit so we don't divide it */
- chipco_write32(cc, SSB_CHIPCO_CORECTL,
-- SSB_CHIPCO_CORECTL_UARTCLK0);
-- } else if (cc->dev->id.revision >= 3) {
-+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
-+ | SSB_CHIPCO_CORECTL_UARTCLK0);
-+ if (ccrev >= 21) {
-+ /* Re-enable the UART clock. */
-+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
-+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
-+ | SSB_CHIPCO_CORECTL_UARTCLKEN);
-+ }
-+ } else if (ccrev >= 3) {
- /* Internal backplane clock */
- baud_base = ssb_clockspeed(bus);
- div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
-@@ -433,7 +459,7 @@ int ssb_chipco_serial_init(struct ssb_ch
- }
-
- /* Clock source depends on strapping if UartClkOverride is unset */
-- if ((cc->dev->id.revision > 0) &&
-+ if ((ccrev > 0) &&
- !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
- if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
- SSB_CHIPCO_CAP_UARTCLK_INT) {
-@@ -455,7 +481,7 @@ int ssb_chipco_serial_init(struct ssb_ch
- cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
- uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
- /* Offset changed at after rev 0 */
-- if (cc->dev->id.revision == 0)
-+ if (ccrev == 0)
- uart_regs += (i * 8);
- else
- uart_regs += (i * 256);
-Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_chipcommon.h
-===================================================================
---- linux-2.6.23.16.orig/include/linux/ssb/ssb_driver_chipcommon.h 2008-02-19 14:37:26.000000000 +0100
-+++ linux-2.6.23.16/include/linux/ssb/ssb_driver_chipcommon.h 2008-02-19 14:37:27.000000000 +0100
-@@ -51,9 +51,12 @@
- #define SSB_CHIPCO_CAP_JTAGM 0x00400000 /* JTAG master present */
- #define SSB_CHIPCO_CAP_BROM 0x00800000 /* Internal boot ROM active */
- #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
-+#define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
-+#define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
- #define SSB_CHIPCO_CORECTL 0x0008
- #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
- #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
-+#define SSB_CHIPCO_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */
- #define SSB_CHIPCO_BIST 0x000C
- #define SSB_CHIPCO_OTPS 0x0010 /* OTP status */
- #define SSB_CHIPCO_OTPS_PROGFAIL 0x80000000
diff --git a/target/linux/brcm47xx/patches-2.6.25/610-ssb-watchdog-fix.patch b/target/linux/brcm47xx/patches-2.6.25/610-ssb-watchdog-fix.patch
deleted file mode 100644
index fecb8b50d0..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/610-ssb-watchdog-fix.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-Index: linux-2.6.23.16/drivers/ssb/Kconfig
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/Kconfig 2008-02-19 13:46:05.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/Kconfig 2008-02-19 13:46:33.000000000 +0100
-@@ -105,6 +105,12 @@ config SSB_DRIVER_MIPS
-
- If unsure, say N
-
-+# Assumption: We are on embedded, if we compile the MIPS core.
-+config SSB_EMBEDDED
-+ bool
-+ depends on SSB_DRIVER_MIPS
-+ default y
-+
- config SSB_DRIVER_EXTIF
- bool "SSB Broadcom EXTIF core driver (EXPERIMENTAL)"
- depends on SSB_DRIVER_MIPS && EXPERIMENTAL
-Index: linux-2.6.23.16/drivers/ssb/Makefile
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/Makefile 2008-02-19 13:46:05.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/Makefile 2008-02-19 13:46:33.000000000 +0100
-@@ -1,5 +1,6 @@
- # core
- ssb-y += main.o scan.o
-+ssb-$(CONFIG_SSB_EMBEDDED) += embedded.o
-
- # host support
- ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
-Index: linux-2.6.23.16/drivers/ssb/driver_extif.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_extif.c 2008-02-19 13:46:05.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_extif.c 2008-02-19 13:46:33.000000000 +0100
-@@ -37,6 +37,12 @@ static inline u32 extif_write32_masked(s
- return value;
- }
-
-+void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
-+ u32 ticks)
-+{
-+ extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks);
-+}
-+
- #ifdef CONFIG_SSB_SERIAL
- static bool serial_exists(u8 *regs)
- {
-Index: linux-2.6.23.16/drivers/ssb/embedded.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.16/drivers/ssb/embedded.c 2008-02-19 13:46:33.000000000 +0100
-@@ -0,0 +1,26 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Embedded systems support code
-+ *
-+ * Copyright 2005-2008, Broadcom Corporation
-+ * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/ssb/ssb_embedded.h>
-+
-+
-+int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks)
-+{
-+ if (ssb_chipco_available(&bus->chipco)) {
-+ ssb_chipco_watchdog_timer_set(&bus->chipco, ticks);
-+ return 0;
-+ }
-+ if (ssb_extif_available(&bus->extif)) {
-+ ssb_extif_watchdog_timer_set(&bus->extif, ticks);
-+ return 0;
-+ }
-+ return -ENODEV;
-+}
-Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_chipcommon.h
-===================================================================
---- linux-2.6.23.16.orig/include/linux/ssb/ssb_driver_chipcommon.h 2008-02-19 13:46:29.000000000 +0100
-+++ linux-2.6.23.16/include/linux/ssb/ssb_driver_chipcommon.h 2008-02-19 13:46:33.000000000 +0100
-@@ -360,6 +360,11 @@ struct ssb_chipcommon {
- u16 fast_pwrup_delay;
- };
-
-+static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-+{
-+ return (cc->dev != NULL);
-+}
-+
- extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
-
- #include <linux/pm.h>
-Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_extif.h
-===================================================================
---- linux-2.6.23.16.orig/include/linux/ssb/ssb_driver_extif.h 2008-02-19 13:46:05.000000000 +0100
-+++ linux-2.6.23.16/include/linux/ssb/ssb_driver_extif.h 2008-02-19 13:46:33.000000000 +0100
-@@ -178,6 +178,9 @@ u32 ssb_extif_gpio_outen(struct ssb_exti
- u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value);
- u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value);
-
-+extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
-+ u32 ticks);
-+
- #ifdef CONFIG_SSB_SERIAL
- extern int ssb_extif_serial_init(struct ssb_extif *extif,
- struct ssb_serial_port *ports);
-@@ -201,5 +204,11 @@ void ssb_extif_get_clockcontrol(struct s
- {
- }
-
-+static inline
-+void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
-+ u32 ticks)
-+{
-+}
-+
- #endif /* CONFIG_SSB_DRIVER_EXTIF */
- #endif /* LINUX_SSB_EXTIFCORE_H_ */
-Index: linux-2.6.23.16/include/linux/ssb/ssb_embedded.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.16/include/linux/ssb/ssb_embedded.h 2008-02-19 13:46:33.000000000 +0100
-@@ -0,0 +1,10 @@
-+#ifndef LINUX_SSB_EMBEDDED_H_
-+#define LINUX_SSB_EMBEDDED_H_
-+
-+#include <linux/types.h>
-+#include <linux/ssb/ssb.h>
-+
-+
-+extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
-+
-+#endif /* LINUX_SSB_EMBEDDED_H_ */
diff --git a/target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch b/target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch
index a36c046018..1efaf7c3f8 100644
--- a/target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch
@@ -1,8 +1,8 @@
-Index: linux-2.6.23.16/drivers/ssb/main.c
+Index: linux-2.6.25.1/drivers/ssb/main.c
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/main.c 2008-02-19 12:38:34.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/main.c 2008-02-19 12:48:25.000000000 +0100
-@@ -1163,7 +1163,9 @@ static int __init ssb_modinit(void)
+--- linux-2.6.25.1.orig/drivers/ssb/main.c 2008-05-10 08:35:23.000000000 +0100
++++ linux-2.6.25.1/drivers/ssb/main.c 2008-05-10 09:04:53.000000000 +0100
+@@ -1173,7 +1173,9 @@ static int __init ssb_modinit(void)
/* ssb must be initialized after PCI but before the ssb drivers.
* That means we must use some initcall between subsys_initcall
* and device_initcall. */
diff --git a/target/linux/brcm47xx/patches-2.6.25/621-ssb-common-gpio-api.patch b/target/linux/brcm47xx/patches-2.6.25/621-ssb-common-gpio-api.patch
deleted file mode 100644
index d1debcfe3a..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/621-ssb-common-gpio-api.patch
+++ /dev/null
@@ -1,245 +0,0 @@
-Index: linux-2.6.23.16/drivers/ssb/driver_chipcommon.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_chipcommon.c 2008-02-19 15:50:42.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_chipcommon.c 2008-02-19 15:50:44.000000000 +0100
-@@ -361,37 +361,31 @@ u32 ssb_chipco_gpio_in(struct ssb_chipco
- {
- return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
- }
--EXPORT_SYMBOL(ssb_chipco_gpio_in);
-
- u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
- }
--EXPORT_SYMBOL(ssb_chipco_gpio_out);
-
- u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
- }
--EXPORT_SYMBOL(ssb_chipco_gpio_outen);
-
- u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
- }
--EXPORT_SYMBOL(ssb_chipco_gpio_control);
-
- u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
- }
--EXPORT_SYMBOL(ssb_chipco_gpio_intmask);
-
- u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
- {
- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
- }
--EXPORT_SYMBOL(ssb_chipco_gpio_polarity);
-
- #ifdef CONFIG_SSB_SERIAL
- int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
-Index: linux-2.6.23.16/drivers/ssb/driver_extif.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_extif.c 2008-02-19 15:50:42.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_extif.c 2008-02-19 15:50:44.000000000 +0100
-@@ -122,30 +122,25 @@ u32 ssb_extif_gpio_in(struct ssb_extif *
- {
- return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
- }
--EXPORT_SYMBOL(ssb_extif_gpio_in);
-
- u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
- {
- return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
- mask, value);
- }
--EXPORT_SYMBOL(ssb_extif_gpio_out);
-
- u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
- {
- return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
- mask, value);
- }
--EXPORT_SYMBOL(ssb_extif_gpio_outen);
-
- u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value)
- {
- return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
- }
--EXPORT_SYMBOL(ssb_extif_gpio_polarity);
-
- u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value)
- {
- return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
- }
--EXPORT_SYMBOL(ssb_extif_gpio_intmask);
-Index: linux-2.6.23.16/drivers/ssb/embedded.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/embedded.c 2008-02-19 15:50:42.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/embedded.c 2008-02-19 15:51:01.000000000 +0100
-@@ -11,6 +11,8 @@
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
-
-+#include "ssb_private.h"
-+
-
- int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks)
- {
-@@ -24,3 +26,107 @@ int ssb_watchdog_timer_set(struct ssb_bu
- }
- return -ENODEV;
- }
-+
-+u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask)
-+{
-+ unsigned long flags;
-+ u32 res = 0;
-+
-+ spin_lock_irqsave(&bus->gpio_lock, flags);
-+ if (ssb_chipco_available(&bus->chipco))
-+ res = ssb_chipco_gpio_in(&bus->chipco, mask);
-+ else if (ssb_extif_available(&bus->extif))
-+ res = ssb_extif_gpio_in(&bus->extif, mask);
-+ else
-+ SSB_WARN_ON(1);
-+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
-+
-+ return res;
-+}
-+EXPORT_SYMBOL(ssb_gpio_in);
-+
-+u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value)
-+{
-+ unsigned long flags;
-+ u32 res = 0;
-+
-+ spin_lock_irqsave(&bus->gpio_lock, flags);
-+ if (ssb_chipco_available(&bus->chipco))
-+ res = ssb_chipco_gpio_out(&bus->chipco, mask, value);
-+ else if (ssb_extif_available(&bus->extif))
-+ res = ssb_extif_gpio_out(&bus->extif, mask, value);
-+ else
-+ SSB_WARN_ON(1);
-+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
-+
-+ return res;
-+}
-+EXPORT_SYMBOL(ssb_gpio_out);
-+
-+u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value)
-+{
-+ unsigned long flags;
-+ u32 res = 0;
-+
-+ spin_lock_irqsave(&bus->gpio_lock, flags);
-+ if (ssb_chipco_available(&bus->chipco))
-+ res = ssb_chipco_gpio_outen(&bus->chipco, mask, value);
-+ else if (ssb_extif_available(&bus->extif))
-+ res = ssb_extif_gpio_outen(&bus->extif, mask, value);
-+ else
-+ SSB_WARN_ON(1);
-+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
-+
-+ return res;
-+}
-+EXPORT_SYMBOL(ssb_gpio_outen);
-+
-+u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value)
-+{
-+ unsigned long flags;
-+ u32 res = 0;
-+
-+ spin_lock_irqsave(&bus->gpio_lock, flags);
-+ if (ssb_chipco_available(&bus->chipco))
-+ res = ssb_chipco_gpio_control(&bus->chipco, mask, value);
-+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
-+
-+ return res;
-+}
-+EXPORT_SYMBOL(ssb_gpio_control);
-+
-+u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value)
-+{
-+ unsigned long flags;
-+ u32 res = 0;
-+
-+ spin_lock_irqsave(&bus->gpio_lock, flags);
-+ if (ssb_chipco_available(&bus->chipco))
-+ res = ssb_chipco_gpio_intmask(&bus->chipco, mask, value);
-+ else if (ssb_extif_available(&bus->extif))
-+ res = ssb_extif_gpio_intmask(&bus->extif, mask, value);
-+ else
-+ SSB_WARN_ON(1);
-+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
-+
-+ return res;
-+}
-+EXPORT_SYMBOL(ssb_gpio_intmask);
-+
-+u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value)
-+{
-+ unsigned long flags;
-+ u32 res = 0;
-+
-+ spin_lock_irqsave(&bus->gpio_lock, flags);
-+ if (ssb_chipco_available(&bus->chipco))
-+ res = ssb_chipco_gpio_polarity(&bus->chipco, mask, value);
-+ else if (ssb_extif_available(&bus->extif))
-+ res = ssb_extif_gpio_polarity(&bus->extif, mask, value);
-+ else
-+ SSB_WARN_ON(1);
-+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
-+
-+ return res;
-+}
-+EXPORT_SYMBOL(ssb_gpio_polarity);
-Index: linux-2.6.23.16/include/linux/ssb/ssb.h
-===================================================================
---- linux-2.6.23.16.orig/include/linux/ssb/ssb.h 2008-02-19 15:50:42.000000000 +0100
-+++ linux-2.6.23.16/include/linux/ssb/ssb.h 2008-02-19 15:50:44.000000000 +0100
-@@ -283,6 +283,11 @@ struct ssb_bus {
- /* Contents of the SPROM. */
- struct ssb_sprom sprom;
-
-+#ifdef CONFIG_SSB_EMBEDDED
-+ /* Lock for GPIO register access. */
-+ spinlock_t gpio_lock;
-+#endif /* EMBEDDED */
-+
- /* Internal-only stuff follows. Do not touch. */
- struct list_head list;
- #ifdef CONFIG_SSB_DEBUG
-Index: linux-2.6.23.16/include/linux/ssb/ssb_embedded.h
-===================================================================
---- linux-2.6.23.16.orig/include/linux/ssb/ssb_embedded.h 2008-02-19 15:50:42.000000000 +0100
-+++ linux-2.6.23.16/include/linux/ssb/ssb_embedded.h 2008-02-19 15:50:44.000000000 +0100
-@@ -7,4 +7,12 @@
-
- extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
-
-+/* Generic GPIO API */
-+u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask);
-+u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value);
-+u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value);
-+u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value);
-+u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value);
-+u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value);
-+
- #endif /* LINUX_SSB_EMBEDDED_H_ */
-Index: linux-2.6.23.16/drivers/ssb/main.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/main.c 2008-02-19 15:50:42.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/main.c 2008-02-19 15:50:44.000000000 +0100
-@@ -571,6 +571,9 @@ static int ssb_bus_register(struct ssb_b
-
- spin_lock_init(&bus->bar_lock);
- INIT_LIST_HEAD(&bus->list);
-+#ifdef CONFIG_SSB_EMBEDDED
-+ spin_lock_init(&bus->gpio_lock);
-+#endif
-
- /* Powerup the bus */
- err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
diff --git a/target/linux/brcm47xx/patches-2.6.25/622-ssb-cardbus-fixes.patch b/target/linux/brcm47xx/patches-2.6.25/622-ssb-cardbus-fixes.patch
deleted file mode 100644
index 1d2779ed74..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/622-ssb-cardbus-fixes.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-Index: linux-2.6.23.16/drivers/ssb/driver_pcicore.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_pcicore.c 2008-02-19 16:37:14.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_pcicore.c 2008-02-19 17:25:26.000000000 +0100
-@@ -11,6 +11,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/pci.h>
- #include <linux/delay.h>
-+#include <linux/ssb/ssb_embedded.h>
-
- #include "ssb_private.h"
-
-@@ -27,6 +28,18 @@ void pcicore_write32(struct ssb_pcicore
- ssb_write32(pc->dev, offset, value);
- }
-
-+static inline
-+u16 pcicore_read16(struct ssb_pcicore *pc, u16 offset)
-+{
-+ return ssb_read16(pc->dev, offset);
-+}
-+
-+static inline
-+void pcicore_write16(struct ssb_pcicore *pc, u16 offset, u16 value)
-+{
-+ ssb_write16(pc->dev, offset, value);
-+}
-+
- /**************************************************
- * Code for hostmode operation.
- **************************************************/
-@@ -123,8 +136,10 @@ static u32 get_cfgspace_addr(struct ssb_
- u32 addr = 0;
- u32 tmp;
-
-- if (unlikely(pc->cardbusmode && dev > 1))
-+ /* We do only have one cardbus device behind the bridge. */
-+ if (pc->cardbusmode && (dev >= 1))
- goto out;
-+
- if (bus == 0) {
- /* Type 0 transaction */
- if (unlikely(dev >= SSB_PCI_SLOT_MAX))
-@@ -324,7 +339,16 @@ static void ssb_pcicore_init_hostmode(st
- pcicore_write32(pc, SSB_PCICORE_ARBCTL, val);
- udelay(1); /* Assertion time demanded by the PCI standard */
-
-- /*TODO cardbus mode */
-+ if (pc->dev->bus->has_cardbus_slot) {
-+ ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
-+ pc->cardbusmode = 1;
-+ /* GPIO 1 resets the bridge */
-+ ssb_gpio_out(pc->dev->bus, 1, 1);
-+ ssb_gpio_outen(pc->dev->bus, 1, 1);
-+ pcicore_write16(pc, SSB_PCICORE_SPROM(0),
-+ pcicore_read16(pc, SSB_PCICORE_SPROM(0))
-+ | 0x0400);
-+ }
-
- /* 64MB I/O window */
- pcicore_write32(pc, SSB_PCICORE_SBTOPCI0,
-Index: linux-2.6.23.16/drivers/ssb/main.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/main.c 2008-02-19 15:50:44.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/main.c 2008-02-19 16:38:31.000000000 +0100
-@@ -559,6 +559,7 @@ static int ssb_fetch_invariants(struct s
- goto out;
- memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
- memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
-+ bus->has_cardbus_slot = iv.has_cardbus_slot;
- out:
- return err;
- }
-Index: linux-2.6.23.16/include/linux/ssb/ssb.h
-===================================================================
---- linux-2.6.23.16.orig/include/linux/ssb/ssb.h 2008-02-19 15:50:44.000000000 +0100
-+++ linux-2.6.23.16/include/linux/ssb/ssb.h 2008-02-19 16:38:31.000000000 +0100
-@@ -282,6 +282,8 @@ struct ssb_bus {
- struct ssb_boardinfo boardinfo;
- /* Contents of the SPROM. */
- struct ssb_sprom sprom;
-+ /* If the board has a cardbus slot, this is set to true. */
-+ bool has_cardbus_slot;
-
- #ifdef CONFIG_SSB_EMBEDDED
- /* Lock for GPIO register access. */
-@@ -299,8 +301,13 @@ struct ssb_bus {
-
- /* The initialization-invariants. */
- struct ssb_init_invariants {
-+ /* Versioning information about the PCB. */
- struct ssb_boardinfo boardinfo;
-+ /* The SPROM information. That's either stored in an
-+ * EEPROM or NVRAM on the board. */
- struct ssb_sprom sprom;
-+ /* If the board has a cardbus slot, this is set to true. */
-+ bool has_cardbus_slot;
- };
- /* Type of function to fetch the invariants. */
- typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus,
-Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_pci.h
-===================================================================
---- linux-2.6.23.16.orig/include/linux/ssb/ssb_driver_pci.h 2008-02-13 20:27:17.000000000 +0100
-+++ linux-2.6.23.16/include/linux/ssb/ssb_driver_pci.h 2008-02-19 17:31:47.000000000 +0100
-@@ -51,6 +51,11 @@
- #define SSB_PCICORE_SBTOPCI1_MASK 0xFC000000
- #define SSB_PCICORE_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
- #define SSB_PCICORE_SBTOPCI2_MASK 0xC0000000
-+#define SSB_PCICORE_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
-+#define SSB_PCICORE_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
-+#define SSB_PCICORE_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
-+#define SSB_PCICORE_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */
-+#define SSB_PCICORE_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
-
- /* SBtoPCIx */
- #define SSB_PCICORE_SBTOPCI_MEM 0x00000000
diff --git a/target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch b/target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch
index 82b64a37b6..e3f7a6da64 100644
--- a/target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch
@@ -1,9 +1,9 @@
Add support for 8bit reads/writes to SSB.
-Index: linux-2.6.23.16/drivers/ssb/main.c
+Index: linux-2.6.25.1/drivers/ssb/main.c
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/main.c 2008-02-20 14:10:07.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/main.c 2008-02-20 18:34:48.000000000 +0100
-@@ -507,6 +507,14 @@ error:
+--- linux-2.6.25.1.orig/drivers/ssb/main.c 2008-05-10 09:04:53.000000000 +0100
++++ linux-2.6.25.1/drivers/ssb/main.c 2008-05-10 09:05:38.000000000 +0100
+@@ -508,6 +508,14 @@ error:
return err;
}
@@ -18,7 +18,7 @@ Index: linux-2.6.23.16/drivers/ssb/main.c
static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
{
struct ssb_bus *bus = dev->bus;
-@@ -523,6 +531,14 @@ static u32 ssb_ssb_read32(struct ssb_dev
+@@ -524,6 +532,14 @@ static u32 ssb_ssb_read32(struct ssb_dev
return readl(bus->mmio + offset);
}
@@ -33,7 +33,7 @@ Index: linux-2.6.23.16/drivers/ssb/main.c
static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
{
struct ssb_bus *bus = dev->bus;
-@@ -541,8 +557,10 @@ static void ssb_ssb_write32(struct ssb_d
+@@ -542,8 +558,10 @@ static void ssb_ssb_write32(struct ssb_d
/* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
static const struct ssb_bus_ops ssb_ssb_ops = {
@@ -44,11 +44,11 @@ Index: linux-2.6.23.16/drivers/ssb/main.c
.write16 = ssb_ssb_write16,
.write32 = ssb_ssb_write32,
};
-Index: linux-2.6.23.16/drivers/ssb/pci.c
+Index: linux-2.6.25.1/drivers/ssb/pci.c
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/pci.c 2008-02-20 14:10:03.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/pci.c 2008-02-20 14:10:07.000000000 +0100
-@@ -572,6 +572,19 @@ static inline int ssb_pci_assert_buspowe
+--- linux-2.6.25.1.orig/drivers/ssb/pci.c 2008-05-10 09:04:53.000000000 +0100
++++ linux-2.6.25.1/drivers/ssb/pci.c 2008-05-10 09:05:38.000000000 +0100
+@@ -577,6 +577,19 @@ static inline int ssb_pci_assert_buspowe
}
#endif /* DEBUG */
@@ -68,7 +68,7 @@ Index: linux-2.6.23.16/drivers/ssb/pci.c
static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset)
{
struct ssb_bus *bus = dev->bus;
-@@ -598,6 +611,19 @@ static u32 ssb_pci_read32(struct ssb_dev
+@@ -603,6 +616,19 @@ static u32 ssb_pci_read32(struct ssb_dev
return ioread32(bus->mmio + offset);
}
@@ -88,7 +88,7 @@ Index: linux-2.6.23.16/drivers/ssb/pci.c
static void ssb_pci_write16(struct ssb_device *dev, u16 offset, u16 value)
{
struct ssb_bus *bus = dev->bus;
-@@ -626,8 +652,10 @@ static void ssb_pci_write32(struct ssb_d
+@@ -631,8 +657,10 @@ static void ssb_pci_write32(struct ssb_d
/* Not "static", as it's used in main.c */
const struct ssb_bus_ops ssb_pci_ops = {
@@ -99,10 +99,10 @@ Index: linux-2.6.23.16/drivers/ssb/pci.c
.write16 = ssb_pci_write16,
.write32 = ssb_pci_write32,
};
-Index: linux-2.6.23.16/drivers/ssb/pcmcia.c
+Index: linux-2.6.25.1/drivers/ssb/pcmcia.c
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/pcmcia.c 2008-02-20 14:10:03.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/pcmcia.c 2008-02-20 14:10:07.000000000 +0100
+--- linux-2.6.25.1.orig/drivers/ssb/pcmcia.c 2008-05-10 09:04:53.000000000 +0100
++++ linux-2.6.25.1/drivers/ssb/pcmcia.c 2008-05-10 09:05:38.000000000 +0100
@@ -172,6 +172,22 @@ static int select_core_and_segment(struc
return 0;
}
@@ -158,10 +158,10 @@ Index: linux-2.6.23.16/drivers/ssb/pcmcia.c
.write16 = ssb_pcmcia_write16,
.write32 = ssb_pcmcia_write32,
};
-Index: linux-2.6.23.16/include/linux/ssb/ssb.h
+Index: linux-2.6.25.1/include/linux/ssb/ssb.h
===================================================================
---- linux-2.6.23.16.orig/include/linux/ssb/ssb.h 2008-02-20 14:10:07.000000000 +0100
-+++ linux-2.6.23.16/include/linux/ssb/ssb.h 2008-02-20 18:33:21.000000000 +0100
+--- linux-2.6.25.1.orig/include/linux/ssb/ssb.h 2008-05-10 09:04:53.000000000 +0100
++++ linux-2.6.25.1/include/linux/ssb/ssb.h 2008-05-10 09:05:38.000000000 +0100
@@ -72,8 +72,10 @@ struct ssb_device;
/* Lowlevel read/write operations on the device MMIO.
* Internal, don't use that outside of ssb. */
@@ -173,7 +173,7 @@ Index: linux-2.6.23.16/include/linux/ssb/ssb.h
void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
};
-@@ -344,6 +346,10 @@ void ssb_device_disable(struct ssb_devic
+@@ -348,6 +350,10 @@ void ssb_device_disable(struct ssb_devic
/* Device MMIO register read/write functions. */
@@ -184,7 +184,7 @@ Index: linux-2.6.23.16/include/linux/ssb/ssb.h
static inline u16 ssb_read16(struct ssb_device *dev, u16 offset)
{
return dev->ops->read16(dev, offset);
-@@ -352,6 +358,10 @@ static inline u32 ssb_read32(struct ssb_
+@@ -356,6 +362,10 @@ static inline u32 ssb_read32(struct ssb_
{
return dev->ops->read32(dev, offset);
}
diff --git a/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch b/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch
index 132b41dc5d..0463da5615 100644
--- a/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch
@@ -1,10 +1,10 @@
Allow registering PCI devices after early boot.
This is an ugly hack and needs to be rewritten before going upstream.
-Index: linux-2.6.23.16/arch/mips/pci/pci.c
+Index: linux-2.6.25/arch/mips/pci/pci.c
===================================================================
---- linux-2.6.23.16.orig/arch/mips/pci/pci.c 2008-02-20 16:06:36.000000000 +0100
-+++ linux-2.6.23.16/arch/mips/pci/pci.c 2008-02-20 16:09:33.000000000 +0100
+--- linux-2.6.25.orig/arch/mips/pci/pci.c 2008-04-27 21:49:19.000000000 +0100
++++ linux-2.6.25/arch/mips/pci/pci.c 2008-04-27 21:58:31.000000000 +0100
@@ -21,6 +21,17 @@
*/
int pci_probe_only;
@@ -146,11 +146,11 @@ Index: linux-2.6.23.16/arch/mips/pci/pci.c
return 0;
}
-Index: linux-2.6.23.16/drivers/ssb/main.c
+Index: linux-2.6.25/drivers/ssb/main.c
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/main.c 2008-02-20 16:06:36.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/main.c 2008-02-20 18:33:21.000000000 +0100
-@@ -1185,9 +1185,7 @@ static int __init ssb_modinit(void)
+--- linux-2.6.25.orig/drivers/ssb/main.c 2008-04-27 21:55:32.000000000 +0100
++++ linux-2.6.25/drivers/ssb/main.c 2008-04-27 21:58:31.000000000 +0100
+@@ -1191,9 +1191,7 @@ static int __init ssb_modinit(void)
/* ssb must be initialized after PCI but before the ssb drivers.
* That means we must use some initcall between subsys_initcall
* and device_initcall. */
diff --git a/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch
index 1b97d126c9..ec3f81d195 100644
--- a/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch
+++ b/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch
@@ -1,8 +1,8 @@
-Index: linux-2.6.23.16/drivers/ssb/Kconfig
+Index: linux-2.6.25.1/drivers/ssb/Kconfig
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/Kconfig 2008-03-19 11:16:18.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/Kconfig 2008-03-19 11:16:18.000000000 +0100
-@@ -120,4 +120,13 @@ config SSB_DRIVER_EXTIF
+--- linux-2.6.25.1.orig/drivers/ssb/Kconfig 2008-05-07 22:45:24.000000000 +0100
++++ linux-2.6.25.1/drivers/ssb/Kconfig 2008-05-07 22:57:40.000000000 +0100
+@@ -125,4 +125,13 @@ config SSB_DRIVER_EXTIF
If unsure, say N
@@ -16,10 +16,10 @@ Index: linux-2.6.23.16/drivers/ssb/Kconfig
+ If unsure, say N
+
endmenu
-Index: linux-2.6.23.16/drivers/ssb/Makefile
+Index: linux-2.6.25.1/drivers/ssb/Makefile
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/Makefile 2008-03-19 11:16:18.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/Makefile 2008-03-19 11:16:18.000000000 +0100
+--- linux-2.6.25.1.orig/drivers/ssb/Makefile 2008-05-07 22:45:24.000000000 +0100
++++ linux-2.6.25.1/drivers/ssb/Makefile 2008-05-07 22:57:40.000000000 +0100
@@ -11,6 +11,7 @@ ssb-y += driver_chipcommon.o
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
@@ -28,10 +28,10 @@ Index: linux-2.6.23.16/drivers/ssb/Makefile
# b43 pci-ssb-bridge driver
# Not strictly a part of SSB, but kept here for convenience
-Index: linux-2.6.23.16/drivers/ssb/driver_gige.c
+Index: linux-2.6.25.1/drivers/ssb/driver_gige.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.16/drivers/ssb/driver_gige.c 2008-03-19 11:16:18.000000000 +0100
++++ linux-2.6.25.1/drivers/ssb/driver_gige.c 2008-05-07 22:57:40.000000000 +0100
@@ -0,0 +1,294 @@
+/*
+ * Sonics Silicon Backplane
@@ -327,10 +327,10 @@ Index: linux-2.6.23.16/drivers/ssb/driver_gige.c
+{
+ return ssb_driver_register(&ssb_gige_driver);
+}
-Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_gige.h
+Index: linux-2.6.25.1/include/linux/ssb/ssb_driver_gige.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.16/include/linux/ssb/ssb_driver_gige.h 2008-03-19 11:16:18.000000000 +0100
++++ linux-2.6.25.1/include/linux/ssb/ssb_driver_gige.h 2008-05-07 22:57:40.000000000 +0100
@@ -0,0 +1,174 @@
+#ifndef LINUX_SSB_DRIVER_GIGE_H_
+#define LINUX_SSB_DRIVER_GIGE_H_
@@ -506,11 +506,11 @@ Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_gige.h
+
+#endif /* CONFIG_SSB_DRIVER_GIGE */
+#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
-Index: linux-2.6.23.16/drivers/ssb/driver_pcicore.c
+Index: linux-2.6.25.1/drivers/ssb/driver_pcicore.c
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_pcicore.c 2008-03-19 11:16:18.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_pcicore.c 2008-03-19 11:16:18.000000000 +0100
-@@ -60,74 +60,6 @@ static DEFINE_SPINLOCK(cfgspace_lock);
+--- linux-2.6.25.1.orig/drivers/ssb/driver_pcicore.c 2008-05-07 22:45:24.000000000 +0100
++++ linux-2.6.25.1/drivers/ssb/driver_pcicore.c 2008-05-07 22:57:40.000000000 +0100
+@@ -60,78 +60,6 @@ static DEFINE_SPINLOCK(cfgspace_lock);
/* Core to access the external PCI config space. Can only have one. */
static struct ssb_pcicore *extpci_core;
@@ -565,7 +565,10 @@ Index: linux-2.6.23.16/drivers/ssb/driver_pcicore.c
-
- /* Enable PCI bridge bus mastering and memory space */
- pci_set_master(dev);
-- pcibios_enable_device(dev, ~0);
+- if (pcibios_enable_device(dev, ~0) < 0) {
+- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
+- return;
+- }
-
- /* Enable PCI bridge BAR1 prefetch and burst */
- pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
@@ -582,10 +585,11 @@ Index: linux-2.6.23.16/drivers/ssb/driver_pcicore.c
-{
- return ssb_mips_irq(extpci_core->dev) + 2;
-}
-
+-
static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
unsigned int bus, unsigned int dev,
-@@ -317,6 +249,92 @@ static struct pci_controller ssb_pcicore
+ unsigned int func, unsigned int off)
+@@ -320,6 +248,95 @@ static struct pci_controller ssb_pcicore
.mem_offset = 0x24000000,
};
@@ -652,7 +656,10 @@ Index: linux-2.6.23.16/drivers/ssb/driver_pcicore.c
+
+ /* Enable PCI bridge bus mastering and memory space */
+ pci_set_master(dev);
-+ pcibios_enable_device(dev, ~0);
++ if (pcibios_enable_device(dev, ~0) < 0) {
++ ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
++ return;
++ }
+
+ /* Enable PCI bridge BAR1 prefetch and burst */
+ pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
@@ -678,10 +685,10 @@ Index: linux-2.6.23.16/drivers/ssb/driver_pcicore.c
static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
{
u32 val;
-Index: linux-2.6.23.16/drivers/ssb/embedded.c
+Index: linux-2.6.25.1/drivers/ssb/embedded.c
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/embedded.c 2008-03-19 11:16:18.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/embedded.c 2008-03-19 11:16:18.000000000 +0100
+--- linux-2.6.25.1.orig/drivers/ssb/embedded.c 2008-05-07 22:45:24.000000000 +0100
++++ linux-2.6.25.1/drivers/ssb/embedded.c 2008-05-07 22:57:40.000000000 +0100
@@ -10,6 +10,9 @@
#include <linux/ssb/ssb.h>
@@ -783,11 +790,11 @@ Index: linux-2.6.23.16/drivers/ssb/embedded.c
+
+ return -ENODEV;
+}
-Index: linux-2.6.23.16/include/linux/ssb/ssb.h
+Index: linux-2.6.25.1/include/linux/ssb/ssb.h
===================================================================
---- linux-2.6.23.16.orig/include/linux/ssb/ssb.h 2008-03-19 11:16:18.000000000 +0100
-+++ linux-2.6.23.16/include/linux/ssb/ssb.h 2008-03-19 11:16:18.000000000 +0100
-@@ -422,5 +422,12 @@ extern int ssb_bus_powerup(struct ssb_bu
+--- linux-2.6.25.1.orig/include/linux/ssb/ssb.h 2008-05-07 22:45:33.000000000 +0100
++++ linux-2.6.25.1/include/linux/ssb/ssb.h 2008-05-07 22:57:40.000000000 +0100
+@@ -426,5 +426,12 @@ extern int ssb_bus_powerup(struct ssb_bu
extern u32 ssb_admatch_base(u32 adm);
extern u32 ssb_admatch_size(u32 adm);
@@ -800,10 +807,10 @@ Index: linux-2.6.23.16/include/linux/ssb/ssb.h
+#endif /* CONFIG_SSB_EMBEDDED */
#endif /* LINUX_SSB_H_ */
-Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_pci.h
+Index: linux-2.6.25.1/include/linux/ssb/ssb_driver_pci.h
===================================================================
---- linux-2.6.23.16.orig/include/linux/ssb/ssb_driver_pci.h 2008-03-19 11:16:18.000000000 +0100
-+++ linux-2.6.23.16/include/linux/ssb/ssb_driver_pci.h 2008-03-19 11:16:18.000000000 +0100
+--- linux-2.6.25.1.orig/include/linux/ssb/ssb_driver_pci.h 2008-05-07 22:45:24.000000000 +0100
++++ linux-2.6.25.1/include/linux/ssb/ssb_driver_pci.h 2008-05-07 22:57:40.000000000 +0100
@@ -1,6 +1,11 @@
#ifndef LINUX_SSB_PCICORE_H_
#define LINUX_SSB_PCICORE_H_
@@ -843,10 +850,10 @@ Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_pci.h
+
#endif /* CONFIG_SSB_DRIVER_PCICORE */
#endif /* LINUX_SSB_PCICORE_H_ */
-Index: linux-2.6.23.16/drivers/ssb/main.c
+Index: linux-2.6.25.1/drivers/ssb/main.c
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/main.c 2008-03-19 11:16:18.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/main.c 2008-03-19 11:16:18.000000000 +0100
+--- linux-2.6.25.1.orig/drivers/ssb/main.c 2008-05-07 22:45:33.000000000 +0100
++++ linux-2.6.25.1/drivers/ssb/main.c 2008-05-07 22:57:40.000000000 +0100
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/ssb/ssb.h>
@@ -881,7 +888,7 @@ Index: linux-2.6.23.16/drivers/ssb/main.c
static struct ssb_device *ssb_device_get(struct ssb_device *dev)
{
if (dev)
-@@ -1175,7 +1195,14 @@ static int __init ssb_modinit(void)
+@@ -1181,7 +1201,14 @@ static int __init ssb_modinit(void)
err = b43_pci_ssb_bridge_init();
if (err) {
ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
@@ -897,7 +904,7 @@ Index: linux-2.6.23.16/drivers/ssb/main.c
/* don't fail SSB init because of this */
err = 0;
}
-@@ -1189,6 +1216,7 @@ fs_initcall(ssb_modinit);
+@@ -1195,6 +1222,7 @@ fs_initcall(ssb_modinit);
static void __exit ssb_modexit(void)
{
@@ -905,10 +912,10 @@ Index: linux-2.6.23.16/drivers/ssb/main.c
b43_pci_ssb_bridge_exit();
bus_unregister(&ssb_bustype);
}
-Index: linux-2.6.23.16/drivers/ssb/ssb_private.h
+Index: linux-2.6.25.1/drivers/ssb/ssb_private.h
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/ssb_private.h 2008-03-19 11:16:15.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/ssb_private.h 2008-03-19 11:16:18.000000000 +0100
+--- linux-2.6.25.1.orig/drivers/ssb/ssb_private.h 2008-05-07 22:45:24.000000000 +0100
++++ linux-2.6.25.1/drivers/ssb/ssb_private.h 2008-05-07 22:57:40.000000000 +0100
@@ -118,6 +118,8 @@ extern u32 ssb_calc_clock_rate(u32 pllty
extern int ssb_devices_freeze(struct ssb_bus *bus);
extern int ssb_devices_thaw(struct ssb_bus *bus);
@@ -917,11 +924,11 @@ Index: linux-2.6.23.16/drivers/ssb/ssb_private.h
+ int (*func)(struct ssb_bus *bus, unsigned long data));
/* b43_pci_bridge.c */
- #ifdef CONFIG_SSB_PCIHOST
-Index: linux-2.6.23.16/drivers/net/tg3.c
+ #ifdef CONFIG_SSB_B43_PCI_BRIDGE
+Index: linux-2.6.25.1/drivers/net/tg3.c
===================================================================
---- linux-2.6.23.16.orig/drivers/net/tg3.c 2008-03-19 11:16:15.000000000 +0100
-+++ linux-2.6.23.16/drivers/net/tg3.c 2008-03-19 11:16:18.000000000 +0100
+--- linux-2.6.25.1.orig/drivers/net/tg3.c 2008-05-07 22:45:24.000000000 +0100
++++ linux-2.6.25.1/drivers/net/tg3.c 2008-05-07 22:57:40.000000000 +0100
@@ -38,6 +38,7 @@
#include <linux/workqueue.h>
#include <linux/prefetch.h>
@@ -930,7 +937,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
#include <net/checksum.h>
#include <net/ip.h>
-@@ -410,8 +411,9 @@ static void _tw32_flush(struct tg3 *tp,
+@@ -425,8 +426,9 @@ static void _tw32_flush(struct tg3 *tp,
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
tp->write32_mbox(tp, off, val);
@@ -942,7 +949,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
tp->read32_mbox(tp, off);
}
-@@ -623,7 +625,7 @@ static void tg3_switch_clocks(struct tg3
+@@ -706,7 +708,7 @@ static void tg3_switch_clocks(struct tg3
#define PHY_BUSY_LOOPS 5000
@@ -951,7 +958,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
{
u32 frame_val;
unsigned int loops;
-@@ -637,7 +639,7 @@ static int tg3_readphy(struct tg3 *tp, i
+@@ -720,7 +722,7 @@ static int tg3_readphy(struct tg3 *tp, i
*val = 0x0;
@@ -960,7 +967,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
-@@ -672,7 +674,12 @@ static int tg3_readphy(struct tg3 *tp, i
+@@ -755,7 +757,12 @@ static int tg3_readphy(struct tg3 *tp, i
return ret;
}
@@ -974,7 +981,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
{
u32 frame_val;
unsigned int loops;
-@@ -688,7 +695,7 @@ static int tg3_writephy(struct tg3 *tp,
+@@ -771,7 +778,7 @@ static int tg3_writephy(struct tg3 *tp,
udelay(80);
}
@@ -983,8 +990,8 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
-@@ -721,6 +728,11 @@ static int tg3_writephy(struct tg3 *tp,
- return ret;
+@@ -810,6 +817,11 @@ static void tg3_phydsp_write(struct tg3
+ tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
}
+static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
@@ -995,22 +1002,22 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
{
u32 phy;
-@@ -1988,6 +2000,14 @@ static int tg3_setup_copper_phy(struct t
- tp->link_config.active_duplex = current_duplex;
- }
+@@ -2250,6 +2262,14 @@ static int tg3_setup_copper_phy(struct t
+ }
+ }
-+ if (tp->tg3_flags3 & TG3_FLG3_ROBOSWITCH) {
-+ current_link_up = 1;
-+ current_speed = SPEED_1000; //FIXME
-+ current_duplex = DUPLEX_FULL;
-+ tp->link_config.active_speed = current_speed;
-+ tp->link_config.active_duplex = current_duplex;
-+ }
++ if (tp->tg3_flags & TG3_FLG3_ROBOSWITCH) {
++ current_link_up = 1;
++ current_speed = SPEED_1000; //FIXME
++ current_duplex = DUPLEX_FULL;
++ tp->link_config.active_speed = current_speed;
++ tp->link_config.active_duplex = current_duplex;
++ }
+
- if (current_link_up == 1 &&
- (tp->link_config.active_duplex == DUPLEX_FULL) &&
- (tp->link_config.autoneg == AUTONEG_ENABLE)) {
-@@ -4813,6 +4833,11 @@ static int tg3_poll_fw(struct tg3 *tp)
+ if (current_link_up == 1 &&
+ tp->link_config.active_duplex == DUPLEX_FULL)
+ tg3_setup_flow_control(tp, lcl_adv, rmt_adv);
+@@ -5197,6 +5217,11 @@ static int tg3_poll_fw(struct tg3 *tp)
int i;
u32 val;
@@ -1022,7 +1029,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
/* Wait up to 20ms for init done. */
for (i = 0; i < 200; i++) {
-@@ -5040,6 +5065,14 @@ static int tg3_chip_reset(struct tg3 *tp
+@@ -5435,6 +5460,14 @@ static int tg3_chip_reset(struct tg3 *tp
tw32(0x5000, 0x400);
}
@@ -1037,7 +1044,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
tw32(GRC_MODE, tp->grc_mode);
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-@@ -5308,9 +5341,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
+@@ -5704,9 +5737,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
return -ENODEV;
}
@@ -1053,7 +1060,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
return 0;
}
-@@ -5391,6 +5427,11 @@ static int tg3_load_5701_a0_firmware_fix
+@@ -5787,6 +5823,11 @@ static int tg3_load_5701_a0_firmware_fix
struct fw_info info;
int err, i;
@@ -1065,7 +1072,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
info.text_base = TG3_FW_TEXT_ADDR;
info.text_len = TG3_FW_TEXT_LEN;
info.text_data = &tg3FwText[0];
-@@ -5949,6 +5990,11 @@ static int tg3_load_tso_firmware(struct
+@@ -6345,6 +6386,11 @@ static int tg3_load_tso_firmware(struct
unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
int err, i;
@@ -1077,7 +1084,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
return 0;
-@@ -6850,6 +6896,11 @@ static void tg3_timer(unsigned long __op
+@@ -7306,6 +7352,11 @@ static void tg3_timer(unsigned long __op
spin_lock(&tp->lock);
@@ -1089,9 +1096,9 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
/* All of this garbage is because when using non-tagged
* IRQ status the mailbox/status_block protocol the chip
-@@ -8432,6 +8483,11 @@ static int tg3_test_nvram(struct tg3 *tp
- u32 *buf, csum, magic;
- int i, j, err = 0, size;
+@@ -8906,6 +8957,11 @@ static int tg3_test_nvram(struct tg3 *tp
+ __le32 *buf;
+ int i, j, k, err = 0, size;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't have NVRAM. */
@@ -1101,7 +1108,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
if (tg3_nvram_read_swab(tp, 0, &magic) != 0)
return -EIO;
-@@ -9154,7 +9210,7 @@ static int tg3_ioctl(struct net_device *
+@@ -9689,7 +9745,7 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
@@ -1110,7 +1117,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
spin_unlock_bh(&tp->lock);
data->val_out = mii_regval;
-@@ -9173,7 +9229,7 @@ static int tg3_ioctl(struct net_device *
+@@ -9708,7 +9764,7 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
@@ -1119,7 +1126,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
spin_unlock_bh(&tp->lock);
return err;
-@@ -9571,6 +9627,12 @@ static void __devinit tg3_get_5906_nvram
+@@ -10177,6 +10233,12 @@ static void __devinit tg3_get_5906_nvram
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void __devinit tg3_nvram_init(struct tg3 *tp)
{
@@ -1132,7 +1139,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
-@@ -9706,6 +9768,9 @@ static int tg3_nvram_read(struct tg3 *tp
+@@ -10317,6 +10379,9 @@ static int tg3_nvram_read(struct tg3 *tp
{
int ret;
@@ -1142,7 +1149,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
return tg3_nvram_read_using_eeprom(tp, offset, val);
-@@ -9938,6 +10003,9 @@ static int tg3_nvram_write_block(struct
+@@ -10563,6 +10628,9 @@ static int tg3_nvram_write_block(struct
{
int ret;
@@ -1152,7 +1159,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
~GRC_LCLCTRL_GPIO_OUTPUT1);
-@@ -10804,7 +10872,6 @@ static int __devinit tg3_get_invariants(
+@@ -11610,7 +11678,6 @@ static int __devinit tg3_get_invariants(
tp->write32 = tg3_write_flush_reg32;
}
@@ -1160,7 +1167,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
tp->write32_tx_mbox = tg3_write32_tx_mbox;
-@@ -10840,6 +10907,11 @@ static int __devinit tg3_get_invariants(
+@@ -11646,6 +11713,11 @@ static int __devinit tg3_get_invariants(
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
@@ -1172,7 +1179,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLG2_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
-@@ -11184,6 +11256,10 @@ static int __devinit tg3_get_device_addr
+@@ -12017,6 +12089,10 @@ static int __devinit tg3_get_device_addr
}
if (!is_valid_ether_addr(&dev->dev_addr[0])) {
@@ -1180,10 +1187,10 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
+ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
+ }
+ if (!is_valid_ether_addr(&dev->dev_addr[0])) {
- #ifdef CONFIG_SPARC64
+ #ifdef CONFIG_SPARC
if (!tg3_get_default_macaddr_sparc(tp))
return 0;
-@@ -11675,6 +11751,7 @@ static char * __devinit tg3_phy_string(s
+@@ -12508,6 +12584,7 @@ static char * __devinit tg3_phy_string(s
case PHY_ID_BCM5704: return "5704";
case PHY_ID_BCM5705: return "5705";
case PHY_ID_BCM5750: return "5750";
@@ -1191,7 +1198,7 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
case PHY_ID_BCM5752: return "5752";
case PHY_ID_BCM5714: return "5714";
case PHY_ID_BCM5780: return "5780";
-@@ -11859,6 +11936,13 @@ static int __devinit tg3_init_one(struct
+@@ -12695,6 +12772,13 @@ static int __devinit tg3_init_one(struct
tp->msg_enable = tg3_debug;
else
tp->msg_enable = TG3_DEF_MSG_ENABLE;
@@ -1205,44 +1212,42 @@ Index: linux-2.6.23.16/drivers/net/tg3.c
/* The word/byte swap controls here control register access byte
* swapping. DMA data byte swapping is controlled in the GRC_MODE
-Index: linux-2.6.23.16/drivers/net/tg3.h
+Index: linux-2.6.25.1/drivers/net/tg3.h
===================================================================
---- linux-2.6.23.16.orig/drivers/net/tg3.h 2008-03-19 11:16:15.000000000 +0100
-+++ linux-2.6.23.16/drivers/net/tg3.h 2008-03-19 11:16:18.000000000 +0100
-@@ -2279,6 +2279,10 @@ struct tg3 {
- #define TG3_FLG2_PHY_JITTER_BUG 0x20000000
- #define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
- #define TG3_FLG2_PHY_ADJUST_TRIM 0x80000000
-+ u32 tg3_flags3;
-+#define TG3_FLG3_IS_SSB_CORE 0x00000001
-+#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00000002
-+#define TG3_FLG3_ROBOSWITCH 0x00000004
+--- linux-2.6.25.1.orig/drivers/net/tg3.h 2008-05-07 22:45:24.000000000 +0100
++++ linux-2.6.25.1/drivers/net/tg3.h 2008-05-07 23:02:12.000000000 +0100
+@@ -2477,6 +2477,9 @@ struct tg3 {
+ #define TG3_FLG3_ENABLE_APE 0x00000002
+ #define TG3_FLG3_5761_5784_AX_FIXES 0x00000004
+ #define TG3_FLG3_5701_DMA_BUG 0x00000008
++#define TG3_FLG3_IS_SSB_CORE 0x00000010
++#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00000020
++#define TG3_FLG3_ROBOSWITCH 0x00000040
struct timer_list timer;
u16 timer_counter;
-@@ -2333,6 +2337,7 @@ struct tg3 {
+@@ -2532,6 +2535,7 @@ struct tg3 {
#define PHY_ID_BCM5714 0x60008340
#define PHY_ID_BCM5780 0x60008350
#define PHY_ID_BCM5755 0xbc050cc0
+#define PHY_ID_BCM5750_2 0xbc050cd0
#define PHY_ID_BCM5787 0xbc050ce0
#define PHY_ID_BCM5756 0xbc050ed0
- #define PHY_ID_BCM5906 0xdc00ac40
-@@ -2364,7 +2369,8 @@ struct tg3 {
- (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \
+ #define PHY_ID_BCM5784 0xbc050fa0
+@@ -2568,7 +2572,7 @@ struct tg3 {
(X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \
(X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
-- (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM8002)
-+ (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM8002 || \
-+ (X) == PHY_ID_BCM5750_2)
+ (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM5761 || \
+- (X) == PHY_ID_BCM8002)
++ (X) == PHY_ID_BCM8002 || (X) == PHY_ID_BCM5750_2)
struct tg3_hw_stats *hw_stats;
dma_addr_t stats_mapping;
-Index: linux-2.6.23.16/drivers/ssb/driver_mipscore.c
+Index: linux-2.6.25.1/drivers/ssb/driver_mipscore.c
===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_mipscore.c 2008-03-19 11:16:18.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_mipscore.c 2008-03-19 11:16:18.000000000 +0100
-@@ -211,6 +211,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+--- linux-2.6.25.1.orig/drivers/ssb/driver_mipscore.c 2008-05-07 22:45:33.000000000 +0100
++++ linux-2.6.25.1/drivers/ssb/driver_mipscore.c 2008-05-07 22:57:40.000000000 +0100
+@@ -212,6 +212,7 @@ void ssb_mipscore_init(struct ssb_mipsco
/* fallthrough */
case SSB_DEV_PCI:
case SSB_DEV_ETHERNET:
diff --git a/target/linux/brcm47xx/patches-2.6.25/800-cfe-workaround.patch b/target/linux/brcm47xx/patches-2.6.25/800-cfe-workaround.patch
new file mode 100644
index 0000000000..361f006c5f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.25/800-cfe-workaround.patch
@@ -0,0 +1,23 @@
+Index: linux-2.6.25.1/arch/mips/bcm47xx/prom.c
+===================================================================
+--- linux-2.6.25.1.orig/arch/mips/bcm47xx/prom.c 2008-05-14 14:46:44.000000000 +0100
++++ linux-2.6.25.1/arch/mips/bcm47xx/prom.c 2008-05-14 17:05:43.000000000 +0100
+@@ -83,9 +83,18 @@ static __init void prom_init_cfe(void)
+ }
+ }
+
++ if (((unsigned int)prom_vec == 0x80300000) ||
++ ((unsigned int)prom_vec == 0x80400000)) {
++ /* WRT54G series workaround */
++ cfe_eptseal = CFE_EPTSEAL;
++ cfe_ept = 0xBFC00500;
++ cfe_handle = (uint32_t)argc;
++ }
++
+ if (cfe_eptseal != CFE_EPTSEAL) {
+ /* too early for panic to do any good */
+ printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
++ *(unsigned int*)0xb8000064 = 0x1;
+ while (1) ;
+ }
+