aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.4/0325-BCM270X_DT-Move-vc4-node-contents-to-bcm2708_common..patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.4/0325-BCM270X_DT-Move-vc4-node-contents-to-bcm2708_common..patch')
-rw-r--r--target/linux/brcm2708/patches-4.4/0325-BCM270X_DT-Move-vc4-node-contents-to-bcm2708_common..patch324
1 files changed, 0 insertions, 324 deletions
diff --git a/target/linux/brcm2708/patches-4.4/0325-BCM270X_DT-Move-vc4-node-contents-to-bcm2708_common..patch b/target/linux/brcm2708/patches-4.4/0325-BCM270X_DT-Move-vc4-node-contents-to-bcm2708_common..patch
deleted file mode 100644
index 38aa269c00..0000000000
--- a/target/linux/brcm2708/patches-4.4/0325-BCM270X_DT-Move-vc4-node-contents-to-bcm2708_common..patch
+++ /dev/null
@@ -1,324 +0,0 @@
-From 7802e183f782f20a30d629cef099c911c07e0e4d Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric@anholt.net>
-Date: Fri, 6 May 2016 11:48:35 -0700
-Subject: [PATCH] BCM270X_DT: Move vc4 node contents to bcm2708_common.dtsi.
-
-This should clarify what's going on with the overlay: The hardware is
-always present, we're just enabling the DT node so that the vc4 driver
-probes.
-
-The interrupts are left in the overlay, because the firmware doesn't
-check node status before masking out the vc4 interrupts.
-
-By having the nodes in the common file, we'll be able to correctly
-connect the HDMI HPD GPIO so that we can detect whether an HDMI
-monitor is connected.
-
-Signed-off-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/bcm2708_common.dtsi | 51 +++++++
- arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 160 ++++++++++-----------
- 2 files changed, 129 insertions(+), 82 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2708_common.dtsi
-+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
-@@ -1,4 +1,7 @@
-+#include "dt-bindings/clock/bcm2835.h"
- #include <dt-bindings/clock/bcm2835-aux.h>
-+#include "dt-bindings/power/raspberrypi-power.h"
-+#include "dt-bindings/gpio/gpio.h"
- #include "skeleton.dtsi"
-
- / {
-@@ -170,6 +173,18 @@
- status = "disabled";
- };
-
-+ pixelvalve0: pixelvalve@7e206000 {
-+ compatible = "brcm,bcm2835-pixelvalve0";
-+ reg = <0x7e206000 0x100>;
-+ status = "disabled";
-+ };
-+
-+ pixelvalve1: pixelvalve@7e207000 {
-+ compatible = "brcm,bcm2835-pixelvalve1";
-+ reg = <0x7e207000 0x100>;
-+ status = "disabled";
-+ };
-+
- pwm: pwm@7e20c000 {
- compatible = "brcm,bcm2835-pwm";
- reg = <0x7e20c000 0x28>;
-@@ -227,6 +242,12 @@
- status = "disabled";
- };
-
-+ hvs: hvs@7e400000 {
-+ compatible = "brcm,bcm2835-hvs";
-+ reg = <0x7e400000 0x6000>;
-+ status = "disabled";
-+ };
-+
- i2c1: i2c@7e804000 {
- compatible = "brcm,bcm2708-i2c";
- reg = <0x7e804000 0x1000>;
-@@ -261,6 +282,25 @@
- status = "disabled";
- };
-
-+ pixelvalve2: pixelvalve@7e807000 {
-+ compatible = "brcm,bcm2835-pixelvalve2";
-+ reg = <0x7e807000 0x100>;
-+ status = "disabled";
-+ };
-+
-+ hdmi: hdmi@7e902000 {
-+ compatible = "brcm,bcm2835-hdmi";
-+ reg = <0x7e902000 0x600>,
-+ <0x7e808000 0x100>;
-+ ddc = <&i2c2>;
-+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-+ clocks = <&cprman BCM2835_PLLH_PIX>,
-+ <&cprman BCM2835_CLOCK_HSM>;
-+ clock-names = "pixel", "hdmi";
-+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-+ status = "disabled";
-+ };
-+
- usb: usb@7e980000 {
- compatible = "brcm,bcm2708-usb";
- reg = <0x7e980000 0x10000>,
-@@ -269,6 +309,12 @@
- <1 9>;
- };
-
-+ v3d: v3d@7ec00000 {
-+ compatible = "brcm,vc4-v3d";
-+ reg = <0x7ec00000 0x1000>;
-+ status = "disabled";
-+ };
-+
- firmware: firmware {
- compatible = "raspberrypi,bcm2835-firmware";
- mboxes = <&mailbox>;
-@@ -303,6 +349,11 @@
- firmware = <&firmware>;
- };
-
-+ gpu: gpu {
-+ compatible = "brcm,bcm2835-vc4";
-+ status = "disabled";
-+ };
-+
- /* Onboard audio */
- audio: audio {
- compatible = "brcm,bcm2835-audio";
---- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
-@@ -5,129 +5,125 @@
- /dts-v1/;
- /plugin/;
-
--#include "dt-bindings/clock/bcm2835.h"
--#include "dt-bindings/power/raspberrypi-power.h"
--#include "dt-bindings/gpio/gpio.h"
--
- / {
- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-
- fragment@0 {
-+ target-path = "/chosen";
-+ __overlay__ {
-+ bootargs = "cma=256M@256M";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target-path = "/chosen";
-+ __dormant__ {
-+ bootargs = "cma=192M@256M";
-+ };
-+ };
-+
-+ fragment@2 {
-+ target-path = "/chosen";
-+ __dormant__ {
-+ bootargs = "cma=128M@128M";
-+ };
-+ };
-+
-+ fragment@3 {
-+ target-path = "/chosen";
-+ __dormant__ {
-+ bootargs = "cma=96M@128M";
-+ };
-+ };
-+
-+ fragment@4 {
-+ target-path = "/chosen";
-+ __dormant__ {
-+ bootargs = "cma=64M@64M";
-+ };
-+ };
-+
-+ fragment@5 {
- target = <&i2c2>;
- __overlay__ {
- status = "okay";
- };
- };
-
-- fragment@1 {
-+ fragment@6 {
- target = <&cprman>;
- __overlay__ {
- status = "okay";
- };
- };
-
-- fragment@2 {
-+ fragment@7 {
- target = <&fb>;
- __overlay__ {
- status = "disabled";
- };
- };
-
-- fragment@3 {
-- target = <&soc>;
-+ fragment@8 {
-+ target = <&pixelvalve0>;
- __overlay__ {
-- #address-cells = <1>;
-- #size-cells = <1>;
-+ interrupts = <2 13>; /* pwa0 */
-+ status = "okay";
-+ };
-+ };
-
-- pixelvalve@7e206000 {
-- compatible = "brcm,bcm2835-pixelvalve0";
-- reg = <0x7e206000 0x100>;
-- interrupts = <2 13>; /* pwa0 */
-- };
--
-- pixelvalve@7e207000 {
-- compatible = "brcm,bcm2835-pixelvalve1";
-- reg = <0x7e207000 0x100>;
-- interrupts = <2 14>; /* pwa1 */
-- };
--
-- hvs@7e400000 {
-- compatible = "brcm,bcm2835-hvs";
-- reg = <0x7e400000 0x6000>;
-- interrupts = <2 1>;
-- };
--
-- pixelvalve@7e807000 {
-- compatible = "brcm,bcm2835-pixelvalve2";
-- reg = <0x7e807000 0x100>;
-- interrupts = <2 10>; /* pixelvalve */
-- };
--
-- hdmi@7e902000 {
-- compatible = "brcm,bcm2835-hdmi";
-- reg = <0x7e902000 0x600>,
-- <0x7e808000 0x100>;
-- interrupts = <2 8>, <2 9>;
-- ddc = <&i2c2>;
-- hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-- clocks = <&cprman BCM2835_PLLH_PIX>,
-- <&cprman BCM2835_CLOCK_HSM>;
-- clock-names = "pixel", "hdmi";
-- power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-- };
--
-- v3d@7ec00000 {
-- compatible = "brcm,vc4-v3d";
-- reg = <0x7ec00000 0x1000>;
-- interrupts = <1 10>;
-- };
--
-- gpu@7e4c0000 {
-- compatible = "brcm,bcm2835-vc4";
-- };
-+ fragment@9 {
-+ target = <&pixelvalve1>;
-+ __overlay__ {
-+ interrupts = <2 14>; /* pwa1 */
-+ status = "okay";
- };
- };
-
-- fragment@4 {
-- target-path = "/chosen";
-- __overlay__ {
-- bootargs = "cma=256M@256M";
-+ fragment@10 {
-+ target = <&pixelvalve2>;
-+ __overlay__ {
-+ interrupts = <2 10>; /* pixelvalve */
-+ status = "okay";
- };
- };
-
-- fragment@5 {
-- target-path = "/chosen";
-- __dormant__ {
-- bootargs = "cma=192M@256M";
-+ fragment@11 {
-+ target = <&hvs>;
-+ __overlay__ {
-+ interrupts = <2 1>;
-+ status = "okay";
- };
- };
-
-- fragment@6 {
-- target-path = "/chosen";
-- __dormant__ {
-- bootargs = "cma=128M@128M";
-+ fragment@12 {
-+ target = <&hdmi>;
-+ __overlay__ {
-+ interrupts = <2 8>, <2 9>;
-+ status = "okay";
- };
- };
-
-- fragment@7 {
-- target-path = "/chosen";
-- __dormant__ {
-- bootargs = "cma=96M@128M";
-+ fragment@13 {
-+ target = <&v3d>;
-+ __overlay__ {
-+ interrupts = <1 10>;
-+ status = "okay";
- };
- };
-
-- fragment@8 {
-- target-path = "/chosen";
-- __dormant__ {
-- bootargs = "cma=64M@64M";
-+ fragment@14 {
-+ target = <&gpu>;
-+ __overlay__ {
-+ status = "okay";
- };
- };
-
- __overrides__ {
-- cma-256 = <0>,"+4-5-6-7-8";
-- cma-192 = <0>,"-4+5-6-7-8";
-- cma-128 = <0>,"-4-5+6-7-8";
-- cma-96 = <0>,"-4-5-6+7-8";
-- cma-64 = <0>,"-4-5-6-7+8";
-+ cma-256 = <0>,"+0-1-2-3-4";
-+ cma-192 = <0>,"-0+1-2-3-4";
-+ cma-128 = <0>,"-0-1+2-3-4";
-+ cma-96 = <0>,"-0-1-2+3-4";
-+ cma-64 = <0>,"-0-1-2-3+4";
- };
- };