1 files changed, 0 insertions, 36 deletions
diff --git a/target/linux/brcm2708/patches-4.4/0149-BCM270X_DT-at86rf233-overlay-drop-to-3MHz.patch b/target/linux/brcm2708/patches-4.4/0149-BCM270X_DT-at86rf233-overlay-drop-to-3MHz.patch
deleted file mode 100644
index f0326ab1e5..0000000000
--- a/target/linux/brcm2708/patches-4.4/0149-BCM270X_DT-at86rf233-overlay-drop-to-3MHz.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 02062281b451fd98412ed607e8d662c0a8d3c19d Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Thu, 18 Feb 2016 15:28:14 +0000
-Subject: [PATCH] BCM270X_DT: at86rf233 overlay - drop to 3MHz
-
-The consensus is that 6MHz is too fast, but that 3MHz is OK.
-
-See: https://github.com/raspberrypi/linux/issues/1294
-     https://github.com/raspberrypi/linux/issues/1151
----
- arch/arm/boot/dts/overlays/README                | 2 +-
- arch/arm/boot/dts/overlays/at86rf233-overlay.dts | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -188,7 +188,7 @@ Load:   dtoverlay=at86rf233,<param>=<val
- Params: interrupt               GPIO used for INT (default 23)
-         reset                   GPIO used for Reset (default 24)
-         sleep                   GPIO used for Sleep (default 25)
--        speed                   SPI bus speed in Hz (default 6000000)
-+        speed                   SPI bus speed in Hz (default 3000000)
-         trim                    Fine tuning of the internal capacitance
-                                 arrays (0=+0pF, 15=+4.5pF, default 15)
- 
---- a/arch/arm/boot/dts/overlays/at86rf233-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/at86rf233-overlay.dts
-@@ -25,7 +25,7 @@
- 				interrupts = <23 4>; /* active high */
- 				reset-gpio = <&gpio 24 1>;
- 				sleep-gpio = <&gpio 25 1>;
--				spi-max-frequency = <6000000>;
-+				spi-max-frequency = <3000000>;
- 				xtal-trim = /bits/ 8 <0xf>;
- 			};
- 		};