aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.4/0034-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.4/0034-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch')
-rw-r--r--target/linux/brcm2708/patches-4.4/0034-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch2022
1 files changed, 2022 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.4/0034-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch b/target/linux/brcm2708/patches-4.4/0034-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch
new file mode 100644
index 0000000000..c53bea399e
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.4/0034-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch
@@ -0,0 +1,2022 @@
+From 9fccc853c4977f9a125de717e7eee0f25895362e Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Wed, 25 Mar 2015 17:49:47 +0000
+Subject: [PATCH 034/127] Adding bcm2835-sdhost driver, and an overlay to
+ enable it
+
+BCM2835 has two SD card interfaces. This driver uses the other one.
+
+bcm2835-sdhost: Error handling fix, and code clarification
+
+bcm2835-sdhost: Adding overclocking option
+
+Allow a different clock speed to be substitued for a requested 50MHz.
+This option is exposed using the "overclock_50" DT parameter.
+Note that the sdhost interface is restricted to integer divisions of
+core_freq, and the highest sensible option for a core_freq of 250MHz
+is 84 (250/3 = 83.3MHz), the next being 125 (250/2) which is much too
+high.
+
+Use at your own risk.
+
+bcm2835-sdhost: Round up the overclock, so 62 works for 62.5Mhz
+
+Also only warn once for each overclock setting.
+
+bcm2835-sdhost: Improve error handling and recovery
+
+1) Expose the hw_reset method to the MMC framework, removing many
+ internal calls by the driver.
+
+2) Reduce overclock setting on error.
+
+3) Increase timeout to cope with high capacity cards.
+
+4) Add properties and parameters to control pio_limit and debug.
+
+5) Reduce messages at probe time.
+
+bcm2835-sdhost: Further improve overclock back-off
+
+bcm2835-sdhost: Clear HBLC for PIO mode
+
+Also update pio_limit default in overlay README.
+
+bcm2835-sdhost: Add the ERASE capability
+
+See: https://github.com/raspberrypi/linux/issues/1076
+
+bcm2835-sdhost: Ignore CRC7 for MMC CMD1
+
+It seems that the sdhost interface returns CRC7 errors for CMD1,
+which is the MMC-specific SEND_OP_COND. Returning these errors to
+the MMC layer causes a downward spiral, but ignoring them seems
+to be harmless.
+
+bcm2835-mmc/sdhost: Remove ARCH_BCM2835 differences
+
+The bcm2835-mmc driver (and -sdhost driver that copied from it)
+contains code to handle SDIO interrupts in a threaded interrupt
+handler rather than waking the MMC framework thread. The change
+follows a patch from Russell King that adds the facility as the
+preferred way of working.
+
+However, the new code path is only present in ARCH_BCM2835
+builds, which I have taken to be a way of testing the waters
+rather than making the change across the board; I can't see
+any technical reason why it wouldn't be enabled for MACH_BCM270X
+builds. So this patch standardises on the ARCH_BCM2835 code,
+removing the old code paths.
+
+bcm2835-sdhost: Don't log timeout errors unless debug=1
+
+The MMC card-discovery process generates timeouts. This is
+expected behaviour, so reporting it to the user serves no purpose.
+Suppress the reporting of timeout errors unless the debug flag
+is on.
+---
+ drivers/mmc/host/Kconfig | 10 +
+ drivers/mmc/host/Makefile | 1 +
+ drivers/mmc/host/bcm2835-sdhost.c | 1907 +++++++++++++++++++++++++++++++++++++
+ 3 files changed, 1918 insertions(+)
+ create mode 100644 drivers/mmc/host/bcm2835-sdhost.c
+
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -33,6 +33,16 @@ config MMC_BCM2835_PIO_DMA_BARRIER
+
+ If unsure, say 2 here.
+
++config MMC_BCM2835_SDHOST
++ tristate "Support for the SDHost controller on BCM2708/9"
++ depends on MACH_BCM2708 || MACH_BCM2709 || ARCH_BCM2835
++ help
++ This selects the SDHost controller on BCM2835/6.
++
++ If you have a controller with this interface, say Y or M here.
++
++ If unsure, say N.
++
+ config MMC_ARMMMCI
+ tristate "ARM AMBA Multimedia Card Interface support"
+ depends on ARM_AMBA
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c
+ obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o
+ obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o
+ obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
++obj-$(CONFIG_MMC_BCM2835_SDHOST) += bcm2835-sdhost.o
+ obj-$(CONFIG_MMC_BCM2835) += bcm2835-mmc.o
+ obj-$(CONFIG_MMC_WBSD) += wbsd.o
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+--- /dev/null
++++ b/drivers/mmc/host/bcm2835-sdhost.c
+@@ -0,0 +1,1907 @@
++/*
++ * BCM2835 SD host driver.
++ *
++ * Author: Phil Elwell <phil@raspberrypi.org>
++ * Copyright 2015
++ *
++ * Based on
++ * mmc-bcm2835.c by Gellert Weisz
++ * which is, in turn, based on
++ * sdhci-bcm2708.c by Broadcom
++ * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko
++ * sdhci.c and sdhci-pci.c by Pierre Ossman
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms and conditions of the GNU General Public License,
++ * version 2, as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define SAFE_READ_THRESHOLD 4
++#define SAFE_WRITE_THRESHOLD 4
++#define ALLOW_DMA 1
++#define ALLOW_CMD23 0
++#define ALLOW_FAST 1
++#define USE_BLOCK_IRQ 1
++
++#include <linux/delay.h>
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/host.h>
++#include <linux/mmc/sd.h>
++#include <linux/scatterlist.h>
++#include <linux/of_address.h>
++#include <linux/of_irq.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <linux/err.h>
++#include <linux/blkdev.h>
++#include <linux/dmaengine.h>
++#include <linux/dma-mapping.h>
++#include <linux/of_dma.h>
++#include <linux/time.h>
++
++#define DRIVER_NAME "sdhost-bcm2835"
++
++#define SDCMD 0x00 /* Command to SD card - 16 R/W */
++#define SDARG 0x04 /* Argument to SD card - 32 R/W */
++#define SDTOUT 0x08 /* Start value for timeout counter - 32 R/W */
++#define SDCDIV 0x0c /* Start value for clock divider - 11 R/W */
++#define SDRSP0 0x10 /* SD card response (31:0) - 32 R */
++#define SDRSP1 0x14 /* SD card response (63:32) - 32 R */
++#define SDRSP2 0x18 /* SD card response (95:64) - 32 R */
++#define SDRSP3 0x1c /* SD card response (127:96) - 32 R */
++#define SDHSTS 0x20 /* SD host status - 11 R */
++#define SDVDD 0x30 /* SD card power control - 1 R/W */
++#define SDEDM 0x34 /* Emergency Debug Mode - 13 R/W */
++#define SDHCFG 0x38 /* Host configuration - 2 R/W */
++#define SDHBCT 0x3c /* Host byte count (debug) - 32 R/W */
++#define SDDATA 0x40 /* Data to/from SD card - 32 R/W */
++#define SDHBLC 0x50 /* Host block count (SDIO/SDHC) - 9 R/W */
++
++#define SDCMD_NEW_FLAG 0x8000
++#define SDCMD_FAIL_FLAG 0x4000
++#define SDCMD_BUSYWAIT 0x800
++#define SDCMD_NO_RESPONSE 0x400
++#define SDCMD_LONG_RESPONSE 0x200
++#define SDCMD_WRITE_CMD 0x80
++#define SDCMD_READ_CMD 0x40
++#define SDCMD_CMD_MASK 0x3f
++
++#define SDCDIV_MAX_CDIV 0x7ff
++
++#define SDHSTS_BUSY_IRPT 0x400
++#define SDHSTS_BLOCK_IRPT 0x200
++#define SDHSTS_SDIO_IRPT 0x100
++#define SDHSTS_REW_TIME_OUT 0x80
++#define SDHSTS_CMD_TIME_OUT 0x40
++#define SDHSTS_CRC16_ERROR 0x20
++#define SDHSTS_CRC7_ERROR 0x10
++#define SDHSTS_FIFO_ERROR 0x08
++/* Reserved */
++/* Reserved */
++#define SDHSTS_DATA_FLAG 0x01
++
++#define SDHSTS_TRANSFER_ERROR_MASK (SDHSTS_CRC7_ERROR|SDHSTS_CRC16_ERROR|SDHSTS_REW_TIME_OUT|SDHSTS_FIFO_ERROR)
++#define SDHSTS_ERROR_MASK (SDHSTS_CMD_TIME_OUT|SDHSTS_TRANSFER_ERROR_MASK)
++
++#define SDHCFG_BUSY_IRPT_EN (1<<10)
++#define SDHCFG_BLOCK_IRPT_EN (1<<8)
++#define SDHCFG_SDIO_IRPT_EN (1<<5)
++#define SDHCFG_DATA_IRPT_EN (1<<4)
++#define SDHCFG_SLOW_CARD (1<<3)
++#define SDHCFG_WIDE_EXT_BUS (1<<2)
++#define SDHCFG_WIDE_INT_BUS (1<<1)
++#define SDHCFG_REL_CMD_LINE (1<<0)
++
++#define SDEDM_FORCE_DATA_MODE (1<<19)
++#define SDEDM_CLOCK_PULSE (1<<20)
++#define SDEDM_BYPASS (1<<21)
++
++#define SDEDM_WRITE_THRESHOLD_SHIFT 9
++#define SDEDM_READ_THRESHOLD_SHIFT 14
++#define SDEDM_THRESHOLD_MASK 0x1f
++
++#define MHZ 1000000
++
++
++struct bcm2835_host {
++ spinlock_t lock;
++
++ void __iomem *ioaddr;
++ u32 bus_addr;
++
++ struct mmc_host *mmc;
++
++ u32 pio_timeout; /* In jiffies */
++
++ int clock; /* Current clock speed */
++
++ bool slow_card; /* Force 11-bit divisor */
++
++ unsigned int max_clk; /* Max possible freq */
++
++ struct tasklet_struct finish_tasklet; /* Tasklet structures */
++
++ struct timer_list timer; /* Timer for timeouts */
++
++ struct timer_list pio_timer; /* PIO error detection timer */
++
++ struct sg_mapping_iter sg_miter; /* SG state for PIO */
++ unsigned int blocks; /* remaining PIO blocks */
++
++ int irq; /* Device IRQ */
++
++
++ /* cached registers */
++ u32 hcfg;
++ u32 cdiv;
++
++ struct mmc_request *mrq; /* Current request */
++ struct mmc_command *cmd; /* Current command */
++ struct mmc_data *data; /* Current data request */
++ unsigned int data_complete:1; /* Data finished before cmd */
++
++ unsigned int flush_fifo:1; /* Drain the fifo when finishing */
++
++ unsigned int use_busy:1; /* Wait for busy interrupt */
++
++ unsigned int debug:1; /* Enable debug output */
++
++ u32 thread_isr;
++
++ /*DMA part*/
++ struct dma_chan *dma_chan_rx; /* DMA channel for reads */
++ struct dma_chan *dma_chan_tx; /* DMA channel for writes */
++
++ bool allow_dma;
++ bool have_dma;
++ bool use_dma;
++ /*end of DMA part*/
++
++ int max_delay; /* maximum length of time spent waiting */
++ struct timeval stop_time; /* when the last stop was issued */
++ u32 delay_after_stop; /* minimum time between stop and subsequent data transfer */
++ u32 overclock_50; /* frequency to use when 50MHz is requested (in MHz) */
++ u32 overclock; /* Current frequency if overclocked, else zero */
++ u32 pio_limit; /* Maximum block count for PIO (0 = always DMA) */
++};
++
++
++static inline void bcm2835_sdhost_write(struct bcm2835_host *host, u32 val, int reg)
++{
++ writel(val, host->ioaddr + reg);
++}
++
++static inline u32 bcm2835_sdhost_read(struct bcm2835_host *host, int reg)
++{
++ return readl(host->ioaddr + reg);
++}
++
++static inline u32 bcm2835_sdhost_read_relaxed(struct bcm2835_host *host, int reg)
++{
++ return readl_relaxed(host->ioaddr + reg);
++}
++
++static void bcm2835_sdhost_dumpcmd(struct bcm2835_host *host,
++ struct mmc_command *cmd,
++ const char *label)
++{
++ if (cmd)
++ pr_info("%s:%c%s op %d arg 0x%x flags 0x%x - resp %08x %08x %08x %08x, err %d\n",
++ mmc_hostname(host->mmc),
++ (cmd == host->cmd) ? '>' : ' ',
++ label, cmd->opcode, cmd->arg, cmd->flags,
++ cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3],
++ cmd->error);
++}
++
++static void bcm2835_sdhost_dumpregs(struct bcm2835_host *host)
++{
++ bcm2835_sdhost_dumpcmd(host, host->mrq->sbc, "sbc");
++ bcm2835_sdhost_dumpcmd(host, host->mrq->cmd, "cmd");
++ if (host->mrq->data)
++ pr_err("%s: data blocks %x blksz %x - err %d\n",
++ mmc_hostname(host->mmc),
++ host->mrq->data->blocks,
++ host->mrq->data->blksz,
++ host->mrq->data->error);
++ bcm2835_sdhost_dumpcmd(host, host->mrq->stop, "stop");
++
++ pr_info("%s: =========== REGISTER DUMP ===========\n",
++ mmc_hostname(host->mmc));
++
++ pr_info("%s: SDCMD 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDCMD));
++ pr_info("%s: SDARG 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDARG));
++ pr_info("%s: SDTOUT 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDTOUT));
++ pr_info("%s: SDCDIV 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDCDIV));
++ pr_info("%s: SDRSP0 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDRSP0));
++ pr_info("%s: SDRSP1 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDRSP1));
++ pr_info("%s: SDRSP2 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDRSP2));
++ pr_info("%s: SDRSP3 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDRSP3));
++ pr_info("%s: SDHSTS 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDHSTS));
++ pr_info("%s: SDVDD 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDVDD));
++ pr_info("%s: SDEDM 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDEDM));
++ pr_info("%s: SDHCFG 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDHCFG));
++ pr_info("%s: SDHBCT 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDHBCT));
++ pr_info("%s: SDHBLC 0x%08x\n",
++ mmc_hostname(host->mmc),
++ bcm2835_sdhost_read(host, SDHBLC));
++
++ pr_info("%s: ===========================================\n",
++ mmc_hostname(host->mmc));
++}
++
++
++static void bcm2835_sdhost_set_power(struct bcm2835_host *host, bool on)
++{
++ bcm2835_sdhost_write(host, on ? 1 : 0, SDVDD);
++}
++
++
++static void bcm2835_sdhost_reset_internal(struct bcm2835_host *host)
++{
++ u32 temp;
++
++ bcm2835_sdhost_set_power(host, false);
++
++ bcm2835_sdhost_write(host, 0, SDCMD);
++ bcm2835_sdhost_write(host, 0, SDARG);
++ bcm2835_sdhost_write(host, 0xf00000, SDTOUT);
++ bcm2835_sdhost_write(host, 0, SDCDIV);
++ bcm2835_sdhost_write(host, 0x7f8, SDHSTS); /* Write 1s to clear */
++ bcm2835_sdhost_write(host, 0, SDHCFG);
++ bcm2835_sdhost_write(host, 0, SDHBCT);
++ bcm2835_sdhost_write(host, 0, SDHBLC);
++
++ /* Limit fifo usage due to silicon bug */
++ temp = bcm2835_sdhost_read(host, SDEDM);
++ temp &= ~((SDEDM_THRESHOLD_MASK<<SDEDM_READ_THRESHOLD_SHIFT) |
++ (SDEDM_THRESHOLD_MASK<<SDEDM_WRITE_THRESHOLD_SHIFT));
++ temp |= (SAFE_READ_THRESHOLD << SDEDM_READ_THRESHOLD_SHIFT) |
++ (SAFE_WRITE_THRESHOLD << SDEDM_WRITE_THRESHOLD_SHIFT);
++ bcm2835_sdhost_write(host, temp, SDEDM);
++ mdelay(10);
++ bcm2835_sdhost_set_power(host, true);
++ mdelay(10);
++ host->clock = 0;
++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG);
++ bcm2835_sdhost_write(host, host->cdiv, SDCDIV);
++ mmiowb();
++}
++
++
++static void bcm2835_sdhost_reset(struct mmc_host *mmc)
++{
++ struct bcm2835_host *host = mmc_priv(mmc);
++ unsigned long flags;
++ if (host->debug)
++ pr_info("%s: reset\n", mmc_hostname(mmc));
++ spin_lock_irqsave(&host->lock, flags);
++
++ bcm2835_sdhost_reset_internal(host);
++
++ spin_unlock_irqrestore(&host->lock, flags);
++}
++
++static void bcm2835_sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
++
++static void bcm2835_sdhost_init(struct bcm2835_host *host, int soft)
++{
++ pr_debug("bcm2835_sdhost_init(%d)\n", soft);
++
++ /* Set interrupt enables */
++ host->hcfg = SDHCFG_BUSY_IRPT_EN;
++
++ bcm2835_sdhost_reset_internal(host);
++
++ if (soft) {
++ /* force clock reconfiguration */
++ host->clock = 0;
++ bcm2835_sdhost_set_ios(host->mmc, &host->mmc->ios);
++ }
++}
++
++static bool bcm2835_sdhost_is_write_complete(struct bcm2835_host *host)
++{
++ bool write_complete = ((bcm2835_sdhost_read(host, SDEDM) & 0xf) == 1);
++
++ if (!write_complete) {
++ /* Request an IRQ for the last block */
++ host->hcfg |= SDHCFG_BLOCK_IRPT_EN;
++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG);
++ if ((bcm2835_sdhost_read(host, SDEDM) & 0xf) == 1) {
++ /* The write has now completed. Disable the interrupt
++ and clear the status flag */
++ host->hcfg &= ~SDHCFG_BLOCK_IRPT_EN;
++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG);
++ bcm2835_sdhost_write(host, SDHSTS_BLOCK_IRPT, SDHSTS);
++ write_complete = true;
++ }
++ }
++
++ return write_complete;
++}
++
++static void bcm2835_sdhost_wait_write_complete(struct bcm2835_host *host)
++{
++ int timediff;
++#ifdef DEBUG
++ static struct timeval start_time;
++ static int max_stall_time = 0;
++ static int total_stall_time = 0;
++ struct timeval before, after;
++
++ do_gettimeofday(&before);
++ if (max_stall_time == 0)
++ start_time = before;
++#endif
++
++ timediff = 0;
++
++ while (1) {
++ u32 edm = bcm2835_sdhost_read(host, SDEDM);
++ if ((edm & 0xf) == 1)
++ break;
++ timediff++;
++ if (timediff > 5000000) {
++#ifdef DEBUG
++ do_gettimeofday(&after);
++ timediff = (after.tv_sec - before.tv_sec)*1000000 +
++ (after.tv_usec - before.tv_usec);
++
++ pr_err(" wait_write_complete - still waiting after %dus\n",
++ timediff);
++#else
++ pr_err(" wait_write_complete - still waiting after %d retries\n",
++ timediff);
++#endif
++ bcm2835_sdhost_dumpregs(host);
++ host->data->error = -ETIMEDOUT;
++ return;
++ }
++ }
++
++#ifdef DEBUG
++ do_gettimeofday(&after);
++ timediff = (after.tv_sec - before.tv_sec)*1000000 + (after.tv_usec - before.tv_usec);
++
++ total_stall_time += timediff;
++ if (timediff > max_stall_time)
++ max_stall_time = timediff;
++
++ if ((after.tv_sec - start_time.tv_sec) > 10) {
++ pr_debug(" wait_write_complete - max wait %dus, total %dus\n",
++ max_stall_time, total_stall_time);
++ start_time = after;
++ max_stall_time = 0;
++ total_stall_time = 0;
++ }
++#endif
++}
++
++static void bcm2835_sdhost_finish_data(struct bcm2835_host *host);
++
++static void bcm2835_sdhost_dma_complete(void *param)
++{
++ struct bcm2835_host *host = param;
++ struct dma_chan *dma_chan;
++ unsigned long flags;
++ u32 dir_data;
++
++ spin_lock_irqsave(&host->lock, flags);
++
++ if (host->data) {
++ bool write_complete;
++ if (USE_BLOCK_IRQ)
++ write_complete = bcm2835_sdhost_is_write_complete(host);
++ else {
++ bcm2835_sdhost_wait_write_complete(host);
++ write_complete = true;
++ }
++ pr_debug("dma_complete() - write_complete=%d\n",
++ write_complete);
++
++ if (write_complete || (host->data->flags & MMC_DATA_READ))
++ {
++ if (write_complete) {
++ dma_chan = host->dma_chan_tx;
++ dir_data = DMA_TO_DEVICE;
++ } else {
++ dma_chan = host->dma_chan_rx;
++ dir_data = DMA_FROM_DEVICE;
++ }
++
++ dma_unmap_sg(dma_chan->device->dev,
++ host->data->sg, host->data->sg_len,
++ dir_data);
++
++ bcm2835_sdhost_finish_data(host);
++ }
++ }
++
++ spin_unlock_irqrestore(&host->lock, flags);
++}
++
++static bool data_transfer_wait(struct bcm2835_host *host)
++{
++ unsigned long timeout = 1000000;
++ while (timeout)
++ {
++ u32 sdhsts = bcm2835_sdhost_read(host, SDHSTS);
++ if (sdhsts & SDHSTS_DATA_FLAG) {
++ bcm2835_sdhost_write(host, SDHSTS_DATA_FLAG, SDHSTS);
++ break;
++ }
++ timeout--;
++ }
++ if (timeout == 0) {
++ pr_err("%s: Data %s timeout\n",
++ mmc_hostname(host->mmc),
++ (host->data->flags & MMC_DATA_READ) ? "read" : "write");
++ bcm2835_sdhost_dumpregs(host);
++ host->data->error = -ETIMEDOUT;
++ return false;
++ }
++ return true;
++}
++
++static void bcm2835_sdhost_read_block_pio(struct bcm2835_host *host)
++{
++ unsigned long flags;
++ size_t blksize, len;
++ u32 *buf;
++
++ blksize = host->data->blksz;
++
++ local_irq_save(flags);
++
++ while (blksize) {
++ if (!sg_miter_next(&host->sg_miter))
++ BUG();
++
++ len = min(host->sg_miter.length, blksize);
++ BUG_ON(len % 4);
++
++ blksize -= len;
++ host->sg_miter.consumed = len;
++
++ buf = (u32 *)host->sg_miter.addr;
++
++ while (len) {
++ if (!data_transfer_wait(host))
++ break;
++
++ *(buf++) = bcm2835_sdhost_read(host, SDDATA);
++ len -= 4;
++ }
++
++ if (host->data->error)
++ break;
++ }
++
++ sg_miter_stop(&host->sg_miter);
++
++ local_irq_restore(flags);
++}
++
++static void bcm2835_sdhost_write_block_pio(struct bcm2835_host *host)
++{
++ unsigned long flags;
++ size_t blksize, len;
++ u32 *buf;
++
++ blksize = host->data->blksz;
++
++ local_irq_save(flags);
++
++ while (blksize) {
++ if (!sg_miter_next(&host->sg_miter))
++ BUG();
++
++ len = min(host->sg_miter.length, blksize);
++ BUG_ON(len % 4);
++
++ blksize -= len;
++ host->sg_miter.consumed = len;
++
++ buf = host->sg_miter.addr;
++
++ while (len) {
++ if (!data_transfer_wait(host))
++ break;
++
++ bcm2835_sdhost_write(host, *(buf++), SDDATA);
++ len -= 4;
++ }
++
++ if (host->data->error)
++ break;
++ }
++
++ sg_miter_stop(&host->sg_miter);
++
++ local_irq_restore(flags);
++}
++
++
++static void bcm2835_sdhost_transfer_pio(struct bcm2835_host *host)
++{
++ u32 sdhsts;
++ bool is_read;
++ BUG_ON(!host->data);
++
++ is_read = (host->data->flags & MMC_DATA_READ) != 0;
++ if (is_read)
++ bcm2835_sdhost_read_block_pio(host);
++ else
++ bcm2835_sdhost_write_block_pio(host);
++
++ sdhsts = bcm2835_sdhost_read(host, SDHSTS);
++ if (sdhsts & (SDHSTS_CRC16_ERROR |
++ SDHSTS_CRC7_ERROR |
++ SDHSTS_FIFO_ERROR)) {
++ pr_err("%s: %s transfer error - HSTS %x\n",
++ mmc_hostname(host->mmc),
++ is_read ? "read" : "write",
++ sdhsts);
++ host->data->error = -EILSEQ;
++ } else if ((sdhsts & (SDHSTS_CMD_TIME_OUT |
++ SDHSTS_REW_TIME_OUT))) {
++ pr_err("%s: %s timeout error - HSTS %x\n",
++ mmc_hostname(host->mmc),
++ is_read ? "read" : "write",
++ sdhsts);
++ host->data->error = -ETIMEDOUT;
++ } else if (!is_read && !host->data->error) {
++ /* Start a timer in case a transfer error occurs because
++ there is no error interrupt */
++ mod_timer(&host->pio_timer, jiffies + host->pio_timeout);
++ }
++}
++
++
++static void bcm2835_sdhost_transfer_dma(struct bcm2835_host *host)
++{
++ u32 len, dir_data, dir_slave;
++ struct dma_async_tx_descriptor *desc = NULL;
++ struct dma_chan *dma_chan;
++
++ pr_debug("bcm2835_sdhost_transfer_dma()\n");
++
++ WARN_ON(!host->data);
++
++ if (!host->data)
++ return;
++
++ if (host->data->flags & MMC_DATA_READ) {
++ dma_chan = host->dma_chan_rx;
++ dir_data = DMA_FROM_DEVICE;
++ dir_slave = DMA_DEV_TO_MEM;
++ } else {
++ dma_chan = host->dma_chan_tx;
++ dir_data = DMA_TO_DEVICE;
++ dir_slave = DMA_MEM_TO_DEV;
++ }
++
++ BUG_ON(!dma_chan->device);
++ BUG_ON(!dma_chan->device->dev);
++ BUG_ON(!host->data->sg);
++
++ len = dma_map_sg(dma_chan->device->dev, host->data->sg,
++ host->data->sg_len, dir_data);
++ if (len > 0) {
++ desc = dmaengine_prep_slave_sg(dma_chan, host->data->sg,
++ len, dir_slave,
++ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
++ } else {
++ dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n");
++ }
++ if (desc) {
++ desc->callback = bcm2835_sdhost_dma_complete;
++ desc->callback_param = host;
++ dmaengine_submit(desc);
++ dma_async_issue_pending(dma_chan);
++ }
++
++}
++
++
++static void bcm2835_sdhost_set_transfer_irqs(struct bcm2835_host *host)
++{
++ u32 all_irqs = SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN |
++ SDHCFG_BUSY_IRPT_EN;
++ if (host->use_dma)
++ host->hcfg = (host->hcfg & ~all_irqs) |
++ SDHCFG_BUSY_IRPT_EN;
++ else
++ host->hcfg = (host->hcfg & ~all_irqs) |
++ SDHCFG_DATA_IRPT_EN |
++ SDHCFG_BUSY_IRPT_EN;
++
++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG);
++}
++
++
++static void bcm2835_sdhost_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd)
++{
++ struct mmc_data *data = cmd->data;
++
++ WARN_ON(host->data);
++
++ if (!data)
++ return;
++
++ /* Sanity checks */
++ BUG_ON(data->blksz * data->blocks > 524288);
++ BUG_ON(data->blksz > host->mmc->max_blk_size);
++ BUG_ON(data->blocks > 65535);
++
++ host->data = data;
++ host->data_complete = 0;
++ host->flush_fifo = 0;
++ host->data->bytes_xfered = 0;
++
++ host->use_dma = host->have_dma && (data->blocks > host->pio_limit);
++ if (!host->use_dma) {
++ int flags;
++
++ flags = SG_MITER_ATOMIC;
++ if (data->flags & MMC_DATA_READ)
++ flags |= SG_MITER_TO_SG;
++ else
++ flags |= SG_MITER_FROM_SG;
++ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
++ host->blocks = data->blocks;
++ }
++
++ bcm2835_sdhost_set_transfer_irqs(host);
++
++ bcm2835_sdhost_write(host, data->blksz, SDHBCT);
++ bcm2835_sdhost_write(host, host->use_dma ? data->blocks : 0, SDHBLC);
++
++ BUG_ON(!host->data);
++}
++
++
++void bcm2835_sdhost_send_command(struct bcm2835_host *host, struct mmc_command *cmd)
++{
++ u32 sdcmd, sdhsts;
++ unsigned long timeout;
++ int delay;
++
++ WARN_ON(host->cmd);
++
++ if (cmd->data)
++ pr_debug("%s: send_command %d 0x%x "
++ "(flags 0x%x) - %s %d*%d\n",
++ mmc_hostname(host->mmc),
++ cmd->opcode, cmd->arg, cmd->flags,
++ (cmd->data->flags & MMC_DATA_READ) ?
++ "read" : "write", cmd->data->blocks,
++ cmd->data->blksz);
++ else
++ pr_debug("%s: send_command %d 0x%x (flags 0x%x)\n",
++ mmc_hostname(host->mmc),
++ cmd->opcode, cmd->arg, cmd->flags);
++
++ /* Wait max 100 ms */
++ timeout = 10000;
++
++ while (bcm2835_sdhost_read(host, SDCMD) & SDCMD_NEW_FLAG) {
++ if (timeout == 0) {
++ pr_err("%s: previous command never completed.\n",
++ mmc_hostname(host->mmc));
++ bcm2835_sdhost_dumpregs(host);
++ cmd->error = -EIO;
++ tasklet_schedule(&host->finish_tasklet);
++ return;
++ }
++ timeout--;
++ udelay(10);
++ }
++
++ delay = (10000 - timeout)/100;
++ if (delay > host->max_delay) {
++ host->max_delay = delay;
++ pr_warning("%s: controller hung for %d ms\n",
++ mmc_hostname(host->mmc),
++ host->max_delay);
++ }
++
++ timeout = jiffies;
++ if (!cmd->data && cmd->busy_timeout > 9000)
++ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
++ else
++ timeout += 10 * HZ;
++ mod_timer(&host->timer, timeout);
++
++ host->cmd = cmd;
++
++ /* Clear any error flags */
++ sdhsts = bcm2835_sdhost_read(host, SDHSTS);
++ if (sdhsts & SDHSTS_ERROR_MASK)
++ bcm2835_sdhost_write(host, sdhsts, SDHSTS);
++
++ bcm2835_sdhost_prepare_data(host, cmd);
++
++ bcm2835_sdhost_write(host, cmd->arg, SDARG);
++
++ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
++ pr_err("%s: unsupported response type!\n",
++ mmc_hostname(host->mmc));
++ cmd->error = -EINVAL;
++ tasklet_schedule(&host->finish_tasklet);
++ return;
++ }
++
++ sdcmd = cmd->opcode & SDCMD_CMD_MASK;
++
++ if (!(cmd->flags & MMC_RSP_PRESENT))
++ sdcmd |= SDCMD_NO_RESPONSE;
++ else {
++ if (cmd->flags & MMC_RSP_136)
++ sdcmd |= SDCMD_LONG_RESPONSE;
++ if (cmd->flags & MMC_RSP_BUSY) {
++ sdcmd |= SDCMD_BUSYWAIT;
++ host->use_busy = 1;
++ }
++ }
++
++ if (cmd->data) {
++ if (host->delay_after_stop) {
++ struct timeval now;
++ int time_since_stop;
++ do_gettimeofday(&now);
++ time_since_stop = (now.tv_sec - host->stop_time.tv_sec);
++ if (time_since_stop < 2) {
++ /* Possibly less than one second */
++ time_since_stop = time_since_stop * 1000000 +
++ (now.tv_usec - host->stop_time.tv_usec);
++ if (time_since_stop < host->delay_after_stop)
++ udelay(host->delay_after_stop -
++ time_since_stop);
++ }
++ }
++
++ if (cmd->data->flags & MMC_DATA_WRITE)
++ sdcmd |= SDCMD_WRITE_CMD;
++ if (cmd->data->flags & MMC_DATA_READ)
++ sdcmd |= SDCMD_READ_CMD;
++ }
++
++ bcm2835_sdhost_write(host, sdcmd | SDCMD_NEW_FLAG, SDCMD);
++}
++
++
++static void bcm2835_sdhost_finish_command(struct bcm2835_host *host);
++static void bcm2835_sdhost_transfer_complete(struct bcm2835_host *host);
++
++static void bcm2835_sdhost_finish_data(struct bcm2835_host *host)
++{
++ struct mmc_data *data;
++
++ data = host->data;
++ BUG_ON(!data);
++
++ pr_debug("finish_data(error %d, stop %d, sbc %d)\n",
++ data->error, data->stop ? 1 : 0,
++ host->mrq->sbc ? 1 : 0);
++
++ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN);
++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG);
++
++ if (data->error) {
++ data->bytes_xfered = 0;
++ } else
++ data->bytes_xfered = data->blksz * data->blocks;
++
++ host->data_complete = 1;
++
++ if (host->cmd) {
++ /*
++ * Data managed to finish before the
++ * command completed. Make sure we do
++ * things in the proper order.
++ */
++ pr_debug("Finished early - HSTS %x\n",
++ bcm2835_sdhost_read(host, SDHSTS));
++ }
++ else
++ bcm2835_sdhost_transfer_complete(host);
++}
++
++
++static void bcm2835_sdhost_transfer_complete(struct bcm2835_host *host)
++{
++ struct mmc_data *data;
++
++ BUG_ON(host->cmd);
++ BUG_ON(!host->data);
++ BUG_ON(!host->data_complete);
++
++ data = host->data;
++ host->data = NULL;
++
++ pr_debug("transfer_complete(error %d, stop %d)\n",
++ data->error, data->stop ? 1 : 0);
++
++ /*
++ * Need to send CMD12 if -
++ * a) open-ended multiblock transfer (no CMD23)
++ * b) error in multiblock transfer
++ */
++ if (data->stop &&
++ (data->error ||
++ !host->mrq->sbc)) {
++ host->flush_fifo = 1;
++ bcm2835_sdhost_send_command(host, data->stop);
++ if (host->delay_after_stop)
++ do_gettimeofday(&host->stop_time);
++ if (!host->use_busy)
++ bcm2835_sdhost_finish_command(host);
++ } else {
++ tasklet_schedule(&host->finish_tasklet);
++ }
++}
++
++static void bcm2835_sdhost_finish_command(struct bcm2835_host *host)
++{
++ u32 sdcmd;
++ unsigned long timeout;
++#ifdef DEBUG
++ struct timeval before, after;
++ int timediff = 0;
++#endif
++
++ pr_debug("finish_command(%x)\n", bcm2835_sdhost_read(host, SDCMD));
++
++ BUG_ON(!host->cmd || !host->mrq);
++
++#ifdef DEBUG
++ do_gettimeofday(&before);
++#endif
++ /* Wait max 100 ms */
++ timeout = 10000;
++ for (sdcmd = bcm2835_sdhost_read(host, SDCMD);
++ (sdcmd & SDCMD_NEW_FLAG) && timeout;
++ timeout--) {
++ if (host->flush_fifo) {
++ while (bcm2835_sdhost_read(host, SDHSTS) &
++ SDHSTS_DATA_FLAG)
++ (void)bcm2835_sdhost_read(host, SDDATA);
++ }
++ udelay(10);
++ sdcmd = bcm2835_sdhost_read(host, SDCMD);
++ }
++#ifdef DEBUG
++ do_gettimeofday(&after);
++ timediff = (after.tv_sec - before.tv_sec)*1000000 +
++ (after.tv_usec - before.tv_usec);
++
++ pr_debug(" finish_command - waited %dus\n", timediff);
++#endif
++
++ if (timeout == 0) {
++ pr_err("%s: command never completed.\n",
++ mmc_hostname(host->mmc));
++ bcm2835_sdhost_dumpregs(host);
++ host->cmd->error = -EIO;
++ tasklet_schedule(&host->finish_tasklet);
++ return;
++ }
++
++ if (host->flush_fifo) {
++ for (timeout = 100;
++ (bcm2835_sdhost_read(host, SDHSTS) & SDHSTS_DATA_FLAG) && timeout;
++ timeout--) {
++ (void)bcm2835_sdhost_read(host, SDDATA);
++ }
++ host->flush_fifo = 0;
++ if (timeout == 0) {
++ pr_err("%s: FIFO never drained.\n",
++ mmc_hostname(host->mmc));
++ bcm2835_sdhost_dumpregs(host);
++ host->cmd->error = -EIO;
++ tasklet_schedule(&host->finish_tasklet);
++ return;
++ }
++ }
++
++ /* Check for errors */
++ if (sdcmd & SDCMD_FAIL_FLAG)
++ {
++ u32 sdhsts = bcm2835_sdhost_read(host, SDHSTS);
++
++ if (host->debug)
++ pr_info("%s: error detected - CMD %x, HSTS %03x, EDM %x\n",
++ mmc_hostname(host->mmc), sdcmd, sdhsts,
++ bcm2835_sdhost_read(host, SDEDM));
++
++ if ((sdhsts & SDHSTS_CRC7_ERROR) &&
++ (host->cmd->opcode == 1)) {
++ if (host->debug)
++ pr_info("%s: ignoring CRC7 error for CMD1\n",
++ mmc_hostname(host->mmc));
++ } else {
++ if (sdhsts & SDHSTS_CMD_TIME_OUT) {
++ if (host->debug)
++ pr_err("%s: command %d timeout\n",
++ mmc_hostname(host->mmc),
++ host->cmd->opcode);
++ host->cmd->error = -ETIMEDOUT;
++ } else {
++ pr_err("%s: unexpected command %d error\n",
++ mmc_hostname(host->mmc),
++ host->cmd->opcode);
++ bcm2835_sdhost_dumpregs(host);
++ host->cmd->error = -EIO;
++ }
++ tasklet_schedule(&host->finish_tasklet);
++ return;
++ }
++ }
++
++ if (host->cmd->flags & MMC_RSP_PRESENT) {
++ if (host->cmd->flags & MMC_RSP_136) {
++ int i;
++ for (i = 0; i < 4; i++)
++ host->cmd->resp[3 - i] = bcm2835_sdhost_read(host, SDRSP0 + i*4);
++ pr_debug("%s: finish_command %08x %08x %08x %08x\n",
++ mmc_hostname(host->mmc),
++ host->cmd->resp[0], host->cmd->resp[1], host->cmd->resp[2], host->cmd->resp[3]);
++ } else {
++ host->cmd->resp[0] = bcm2835_sdhost_read(host, SDRSP0);
++ pr_debug("%s: finish_command %08x\n",
++ mmc_hostname(host->mmc),
++ host->cmd->resp[0]);
++ }
++ }
++
++ host->cmd->error = 0;
++
++ if (host->cmd == host->mrq->sbc) {
++ /* Finished CMD23, now send actual command. */
++ host->cmd = NULL;
++ bcm2835_sdhost_send_command(host, host->mrq->cmd);
++
++ if (host->cmd->data && host->use_dma)
++ /* DMA transfer starts now, PIO starts after irq */
++ bcm2835_sdhost_transfer_dma(host);
++
++ if (!host->use_busy)
++ bcm2835_sdhost_finish_command(host);
++ } else if (host->cmd == host->mrq->stop)
++ /* Finished CMD12 */
++ tasklet_schedule(&host->finish_tasklet);
++ else {
++ /* Processed actual command. */
++ host->cmd = NULL;
++ if (!host->data)
++ tasklet_schedule(&host->finish_tasklet);
++ else if (host->data_complete)
++ bcm2835_sdhost_transfer_complete(host);
++ }
++}
++
++static void bcm2835_sdhost_timeout(unsigned long data)
++{
++ struct bcm2835_host *host;
++ unsigned long flags;
++
++ host = (struct bcm2835_host *)data;
++
++ spin_lock_irqsave(&host->lock, flags);
++
++ if (host->mrq) {
++ pr_err("%s: timeout waiting for hardware interrupt.\n",
++ mmc_hostname(host->mmc));
++ bcm2835_sdhost_dumpregs(host);
++
++ if (host->data) {
++ host->data->error = -ETIMEDOUT;
++ bcm2835_sdhost_finish_data(host);
++ } else {
++ if (host->cmd)
++ host->cmd->error = -ETIMEDOUT;
++ else
++ host->mrq->cmd->error = -ETIMEDOUT;
++
++ pr_debug("timeout_timer tasklet_schedule\n");
++ tasklet_schedule(&host->finish_tasklet);
++ }
++ }
++
++ mmiowb();
++ spin_unlock_irqrestore(&host->lock, flags);
++}
++
++static void bcm2835_sdhost_pio_timeout(unsigned long data)
++{
++ struct bcm2835_host *host;
++ unsigned long flags;
++
++ host = (struct bcm2835_host *)data;
++
++ spin_lock_irqsave(&host->lock, flags);
++
++ if (host->data) {
++ u32 sdhsts = bcm2835_sdhost_read(host, SDHSTS);
++
++ if (sdhsts & SDHSTS_REW_TIME_OUT) {
++ pr_err("%s: transfer timeout\n",
++ mmc_hostname(host->mmc));
++ if (host->debug)
++ bcm2835_sdhost_dumpregs(host);
++ } else {
++ pr_err("%s: unexpected transfer timeout\n",
++ mmc_hostname(host->mmc));
++ bcm2835_sdhost_dumpregs(host);
++ }
++
++ bcm2835_sdhost_write(host, SDHSTS_TRANSFER_ERROR_MASK,
++ SDHSTS);
++
++ host->data->error = -ETIMEDOUT;
++
++ bcm2835_sdhost_finish_data(host);
++ }
++
++ mmiowb();
++ spin_unlock_irqrestore(&host->lock, flags);
++}
++
++static void bcm2835_sdhost_enable_sdio_irq_nolock(struct bcm2835_host *host, int enable)
++{
++ if (enable)
++ host->hcfg |= SDHCFG_SDIO_IRPT_EN;
++ else
++ host->hcfg &= ~SDHCFG_SDIO_IRPT_EN;
++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG);
++ mmiowb();
++}
++
++static void bcm2835_sdhost_enable_sdio_irq(struct mmc_host *mmc, int enable)
++{
++ struct bcm2835_host *host = mmc_priv(mmc);
++ unsigned long flags;
++
++ pr_debug("%s: enable_sdio_irq(%d)\n", mmc_hostname(mmc), enable);
++ spin_lock_irqsave(&host->lock, flags);
++ bcm2835_sdhost_enable_sdio_irq_nolock(host, enable);
++ spin_unlock_irqrestore(&host->lock, flags);
++}
++
++static u32 bcm2835_sdhost_busy_irq(struct bcm2835_host *host, u32 intmask)
++{
++ const u32 handled = (SDHSTS_REW_TIME_OUT | SDHSTS_CMD_TIME_OUT |
++ SDHSTS_CRC16_ERROR | SDHSTS_CRC7_ERROR |
++ SDHSTS_FIFO_ERROR);
++
++ if (!host->cmd) {
++ pr_err("%s: got command busy interrupt 0x%08x even "
++ "though no command operation was in progress.\n",
++ mmc_hostname(host->mmc), (unsigned)intmask);
++ bcm2835_sdhost_dumpregs(host);
++ return 0;
++ }
++
++ if (!host->use_busy) {
++ pr_err("%s: got command busy interrupt 0x%08x even "
++ "though not expecting one.\n",
++ mmc_hostname(host->mmc), (unsigned)intmask);
++ bcm2835_sdhost_dumpregs(host);
++ return 0;
++ }
++ host->use_busy = 0;
++
++ if (intmask & SDHSTS_ERROR_MASK)
++ {
++ pr_err("sdhost_busy_irq: intmask %x, data %p\n", intmask, host->mrq->data);
++ if (intmask & SDHSTS_CRC7_ERROR)
++ host->cmd->error = -EILSEQ;
++ else if (intmask & (SDHSTS_CRC16_ERROR |
++ SDHSTS_FIFO_ERROR)) {
++ if (host->mrq->data)
++ host->mrq->data->error = -EILSEQ;
++ else
++ host->cmd->error = -EILSEQ;
++ } else if (intmask & SDHSTS_REW_TIME_OUT) {
++ if (host->mrq->data)
++ host->mrq->data->error = -ETIMEDOUT;
++ else
++ host->cmd->error = -ETIMEDOUT;
++ } else if (intmask & SDHSTS_CMD_TIME_OUT)
++ host->cmd->error = -ETIMEDOUT;
++
++ bcm2835_sdhost_dumpregs(host);
++ tasklet_schedule(&host->finish_tasklet);
++ }
++ else
++ bcm2835_sdhost_finish_command(host);
++
++ return handled;
++}
++
++static u32 bcm2835_sdhost_data_irq(struct bcm2835_host *host, u32 intmask)
++{
++ const u32 handled = (SDHSTS_REW_TIME_OUT |
++ SDHSTS_CRC16_ERROR |
++ SDHSTS_FIFO_ERROR);
++
++ /* There are no dedicated data/space available interrupt
++ status bits, so it is necessary to use the single shared
++ data/space available FIFO status bits. It is therefore not
++ an error to get here when there is no data transfer in
++ progress. */
++ if (!host->data)
++ return 0;
++
++ if (intmask & (SDHSTS_CRC16_ERROR |
++ SDHSTS_FIFO_ERROR |
++ SDHSTS_REW_TIME_OUT)) {
++ if (intmask & (SDHSTS_CRC16_ERROR |
++ SDHSTS_FIFO_ERROR))
++ host->data->error = -EILSEQ;
++ else
++ host->data->error = -ETIMEDOUT;
++
++ bcm2835_sdhost_dumpregs(host);
++ tasklet_schedule(&host->finish_tasklet);
++ return handled;
++ }
++
++ /* Use the block interrupt for writes after the first block */
++ if (host->data->flags & MMC_DATA_WRITE) {
++ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN);
++ host->hcfg |= SDHCFG_BLOCK_IRPT_EN;
++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG);
++ if (host->data->error)
++ bcm2835_sdhost_finish_data(host);
++ else
++ bcm2835_sdhost_transfer_pio(host);
++ } else {
++ if (!host->data->error) {
++ bcm2835_sdhost_transfer_pio(host);
++ host->blocks--;
++ }
++ if ((host->blocks == 0) || host->data->error)
++ bcm2835_sdhost_finish_data(host);
++ }
++
++ return handled;
++}
++
++static u32 bcm2835_sdhost_block_irq(struct bcm2835_host *host, u32 intmask)
++{
++ struct dma_chan *dma_chan;
++ u32 dir_data;
++ const u32 handled = (SDHSTS_REW_TIME_OUT |
++ SDHSTS_CRC16_ERROR |
++ SDHSTS_FIFO_ERROR);
++
++ if (!host->data) {
++ pr_err("%s: got block interrupt 0x%08x even "
++ "though no data operation was in progress.\n",
++ mmc_hostname(host->mmc), (unsigned)intmask);
++ bcm2835_sdhost_dumpregs(host);
++ return handled;
++ }
++
++ if (intmask & (SDHSTS_CRC16_ERROR |
++ SDHSTS_FIFO_ERROR |
++ SDHSTS_REW_TIME_OUT)) {
++ if (intmask & (SDHSTS_CRC16_ERROR |
++ SDHSTS_FIFO_ERROR))
++ host->data->error = -EILSEQ;
++ else
++ host->data->error = -ETIMEDOUT;
++
++ if (host->debug)
++ bcm2835_sdhost_dumpregs(host);
++ tasklet_schedule(&host->finish_tasklet);
++ return handled;
++ }
++
++ if (!host->use_dma) {
++ BUG_ON(!host->blocks);
++ host->blocks--;
++ if ((host->blocks == 0) || host->data->error) {
++ /* Cancel the timer */
++ del_timer(&host->pio_timer);
++
++ bcm2835_sdhost_finish_data(host);
++ } else {
++ bcm2835_sdhost_transfer_pio(host);
++
++ /* Reset the timer */
++ mod_timer(&host->pio_timer,
++ jiffies + host->pio_timeout);
++ }
++ } else if (host->data->flags & MMC_DATA_WRITE) {
++ dma_chan = host->dma_chan_tx;
++ dir_data = DMA_TO_DEVICE;
++ dma_unmap_sg(dma_chan->device->dev,
++ host->data->sg, host->data->sg_len,
++ dir_data);
++
++ bcm2835_sdhost_finish_data(host);
++ }
++
++ return handled;
++}
++
++
++static irqreturn_t bcm2835_sdhost_irq(int irq, void *dev_id)
++{
++ irqreturn_t result = IRQ_NONE;
++ struct bcm2835_host *host = dev_id;
++ u32 unexpected = 0, early = 0;
++ int loops = 0;
++
++ spin_lock(&host->lock);
++
++ for (loops = 0; loops < 1; loops++) {
++ u32 intmask, handled;
++
++ intmask = bcm2835_sdhost_read(host, SDHSTS);
++ handled = intmask & (SDHSTS_BUSY_IRPT |
++ SDHSTS_BLOCK_IRPT |
++ SDHSTS_SDIO_IRPT |
++ SDHSTS_DATA_FLAG);
++ if ((handled == SDHSTS_DATA_FLAG) &&
++ (loops == 0) && !host->data) {
++ pr_err("%s: sdhost_irq data interrupt 0x%08x even "
++ "though no data operation was in progress.\n",
++ mmc_hostname(host->mmc),
++ (unsigned)intmask);
++
++ bcm2835_sdhost_dumpregs(host);
++ }
++
++ if (!handled)
++ break;
++
++ if (loops)
++ early |= handled;
++
++ result = IRQ_HANDLED;
++
++ /* Clear all interrupts and notifications */
++ bcm2835_sdhost_write(host, intmask, SDHSTS);
++
++ if (intmask & SDHSTS_BUSY_IRPT)
++ handled |= bcm2835_sdhost_busy_irq(host, intmask);
++
++ /* There is no true data interrupt status bit, so it is
++ necessary to qualify the data flag with the interrupt
++ enable bit */
++ if ((intmask & SDHSTS_DATA_FLAG) &&
++ (host->hcfg & SDHCFG_DATA_IRPT_EN))
++ handled |= bcm2835_sdhost_data_irq(host, intmask);
++
++ if (intmask & SDHSTS_BLOCK_IRPT)
++ handled |= bcm2835_sdhost_block_irq(host, intmask);
++
++ if (intmask & SDHSTS_SDIO_IRPT) {
++ bcm2835_sdhost_enable_sdio_irq_nolock(host, false);
++ host->thread_isr |= SDHSTS_SDIO_IRPT;
++ result = IRQ_WAKE_THREAD;
++ }
++
++ unexpected |= (intmask & ~handled);
++ }
++
++ mmiowb();
++
++ spin_unlock(&host->lock);
++
++ if (early)
++ pr_debug("%s: early %x (loops %d)\n",
++ mmc_hostname(host->mmc), early, loops);
++
++ if (unexpected) {
++ pr_err("%s: unexpected interrupt 0x%08x.\n",
++ mmc_hostname(host->mmc), unexpected);
++ bcm2835_sdhost_dumpregs(host);
++ }
++
++ return result;
++}
++
++static irqreturn_t bcm2835_sdhost_thread_irq(int irq, void *dev_id)
++{
++ struct bcm2835_host *host = dev_id;
++ unsigned long flags;
++ u32 isr;
++
++ spin_lock_irqsave(&host->lock, flags);
++ isr = host->thread_isr;
++ host->thread_isr = 0;
++ spin_unlock_irqrestore(&host->lock, flags);
++
++ if (isr & SDHSTS_SDIO_IRPT) {
++ sdio_run_irqs(host->mmc);
++
++/* Is this necessary? Why re-enable an interrupt which is enabled?
++ spin_lock_irqsave(&host->lock, flags);
++ if (host->flags & SDHSTS_SDIO_IRPT_ENABLED)
++ bcm2835_sdhost_enable_sdio_irq_nolock(host, true);
++ spin_unlock_irqrestore(&host->lock, flags);
++*/
++ }
++
++ return isr ? IRQ_HANDLED : IRQ_NONE;
++}
++
++
++
++void bcm2835_sdhost_set_clock(struct bcm2835_host *host, unsigned int clock)
++{
++ int div = 0; /* Initialized for compiler warning */
++ unsigned int input_clock = clock;
++
++ if (host->debug)
++ pr_info("%s: set_clock(%d)\n", mmc_hostname(host->mmc), clock);
++
++ if ((host->overclock_50 > 50) &&
++ (clock == 50*MHZ)) {
++ clock = host->overclock_50 * MHZ + (MHZ - 1);
++ }
++
++ /* The SDCDIV register has 11 bits, and holds (div - 2).
++ But in data mode the max is 50MHz wihout a minimum, and only the
++ bottom 3 bits are used. Since the switch over is automatic (unless
++ we have marked the card as slow...), chosen values have to make
++ sense in both modes.
++ Ident mode must be 100-400KHz, so can range check the requested
++ clock. CMD15 must be used to return to data mode, so this can be
++ monitored.
++
++ clock 250MHz -> 0->125MHz, 1->83.3MHz, 2->62.5MHz, 3->50.0MHz
++ 4->41.7MHz, 5->35.7MHz, 6->31.3MHz, 7->27.8MHz
++
++ 623->400KHz/27.8MHz
++ reset value (507)->491159/50MHz
++
++ BUT, the 3-bit clock divisor in data mode is too small if the
++ core clock is higher than 250MHz, so instead use the SLOW_CARD
++ configuration bit to force the use of the ident clock divisor
++ at all times.
++ */
++
++ host->mmc->actual_clock = 0;
++
++ if (clock < 100000) {
++ /* Can't stop the clock, but make it as slow as possible
++ * to show willing
++ */
++ host->cdiv = SDCDIV_MAX_CDIV;
++ bcm2835_sdhost_write(host, host->cdiv, SDCDIV);
++ return;
++ }
++
++ div = host->max_clk / clock;
++ if (div < 2)
++ div = 2;
++ if ((host->max_clk / div) > clock)
++ div++;
++ div -= 2;
++
++ if (div > SDCDIV_MAX_CDIV)
++ div = SDCDIV_MAX_CDIV;
++
++ clock = host->max_clk / (div + 2);
++ host->mmc->actual_clock = clock;
++
++ if (clock > input_clock) {
++ /* Save the closest value, to make it easier
++ to reduce in the event of error */
++ host->overclock_50 = (clock/MHZ);
++
++ if (clock != host->overclock) {
++ pr_warn("%s: overclocking to %dHz\n",
++ mmc_hostname(host->mmc), clock);
++ host->overclock = clock;
++ }
++ }
++ else if (host->overclock)
++ {
++ host->overclock = 0;
++ if (clock == 50 * MHZ)
++ pr_warn("%s: cancelling overclock\n",
++ mmc_hostname(host->mmc));
++ }
++
++ host->cdiv = div;
++ bcm2835_sdhost_write(host, host->cdiv, SDCDIV);
++
++ /* Set the timeout to 500ms */
++ bcm2835_sdhost_write(host, host->mmc->actual_clock/2, SDTOUT);
++
++ if (host->debug)
++ pr_info("%s: clock=%d -> max_clk=%d, cdiv=%x (actual clock %d)\n",
++ mmc_hostname(host->mmc), input_clock,
++ host->max_clk, host->cdiv, host->mmc->actual_clock);
++}
++
++static void bcm2835_sdhost_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct bcm2835_host *host;
++ unsigned long flags;
++
++ host = mmc_priv(mmc);
++
++ if (host->debug) {
++ struct mmc_command *cmd = mrq->cmd;
++ BUG_ON(!cmd);
++ if (cmd->data)
++ pr_info("%s: cmd %d 0x%x (flags 0x%x) - %s %d*%d\n",
++ mmc_hostname(mmc),
++ cmd->opcode, cmd->arg, cmd->flags,
++ (cmd->data->flags & MMC_DATA_READ) ?
++ "read" : "write", cmd->data->blocks,
++ cmd->data->blksz);
++ else
++ pr_info("%s: cmd %d 0x%x (flags 0x%x)\n",
++ mmc_hostname(mmc),
++ cmd->opcode, cmd->arg, cmd->flags);
++ }
++
++ /* Reset the error statuses in case this is a retry */
++ if (mrq->cmd)
++ mrq->cmd->error = 0;
++ if (mrq->data)
++ mrq->data->error = 0;
++ if (mrq->stop)
++ mrq->stop->error = 0;
++
++ if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
++ pr_err("%s: unsupported block size (%d bytes)\n",
++ mmc_hostname(mmc), mrq->data->blksz);
++ mrq->cmd->error = -EINVAL;
++ mmc_request_done(mmc, mrq);
++ return;
++ }
++
++ spin_lock_irqsave(&host->lock, flags);
++
++ WARN_ON(host->mrq != NULL);
++
++ host->mrq = mrq;
++
++ if (mrq->sbc)
++ bcm2835_sdhost_send_command(host, mrq->sbc);
++ else
++ bcm2835_sdhost_send_command(host, mrq->cmd);
++
++ mmiowb();
++ spin_unlock_irqrestore(&host->lock, flags);
++
++ if (!mrq->sbc && mrq->cmd->data && host->use_dma)
++ /* DMA transfer starts now, PIO starts after irq */
++ bcm2835_sdhost_transfer_dma(host);
++
++ if (!host->use_busy)
++ bcm2835_sdhost_finish_command(host);
++}
++
++
++static void bcm2835_sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++
++ struct bcm2835_host *host = mmc_priv(mmc);
++ unsigned long flags;
++
++ if (host->debug)
++ pr_info("%s: ios clock %d, pwr %d, bus_width %d, "
++ "timing %d, vdd %d, drv_type %d\n",
++ mmc_hostname(mmc),
++ ios->clock, ios->power_mode, ios->bus_width,
++ ios->timing, ios->signal_voltage, ios->drv_type);
++
++ spin_lock_irqsave(&host->lock, flags);
++
++ if (!ios->clock || ios->clock != host->clock) {
++ bcm2835_sdhost_set_clock(host, ios->clock);
++ host->clock = ios->clock;
++ }
++
++ /* set bus width */
++ host->hcfg &= ~SDHCFG_WIDE_EXT_BUS;
++ if (ios->bus_width == MMC_BUS_WIDTH_4)
++ host->hcfg |= SDHCFG_WIDE_EXT_BUS;
++
++ host->hcfg |= SDHCFG_WIDE_INT_BUS;
++
++ /* Disable clever clock switching, to cope with fast core clocks */
++ host->hcfg |= SDHCFG_SLOW_CARD;
++
++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG);
++
++ mmiowb();
++
++ spin_unlock_irqrestore(&host->lock, flags);
++}
++
++static int bcm2835_sdhost_multi_io_quirk(struct mmc_card *card,
++ unsigned int direction,
++ u32 blk_pos, int blk_size)
++{
++ /* There is a bug in the host controller hardware that makes
++ reading the final sector of the card as part of a multiple read
++ problematic. Detect that case and shorten the read accordingly.
++ */
++ /* csd.capacity is in weird units - convert to sectors */
++ u32 card_sectors = (card->csd.capacity << (card->csd.read_blkbits - 9));
++
++ if ((direction == MMC_DATA_READ) &&
++ ((blk_pos + blk_size) == card_sectors))
++ blk_size--;
++
++ return blk_size;
++}
++
++
++static struct mmc_host_ops bcm2835_sdhost_ops = {
++ .request = bcm2835_sdhost_request,
++ .set_ios = bcm2835_sdhost_set_ios,
++ .enable_sdio_irq = bcm2835_sdhost_enable_sdio_irq,
++ .hw_reset = bcm2835_sdhost_reset,
++ .multi_io_quirk = bcm2835_sdhost_multi_io_quirk,
++};
++
++
++static void bcm2835_sdhost_tasklet_finish(unsigned long param)
++{
++ struct bcm2835_host *host;
++ unsigned long flags;
++ struct mmc_request *mrq;
++
++ host = (struct bcm2835_host *)param;
++
++ spin_lock_irqsave(&host->lock, flags);
++
++ /*
++ * If this tasklet gets rescheduled while running, it will
++ * be run again afterwards but without any active request.
++ */
++ if (!host->mrq) {
++ spin_unlock_irqrestore(&host->lock, flags);
++ return;
++ }
++
++ del_timer(&host->timer);
++
++ mrq = host->mrq;
++
++ /* Drop the overclock after any data corruption, or after any
++ error overclocked */
++ if (host->overclock) {
++ if ((mrq->cmd && mrq->cmd->error) ||
++ (mrq->data && mrq->data->error) ||
++ (mrq->stop && mrq->stop->error)) {
++ host->overclock_50--;
++ pr_warn("%s: reducing overclock due to errors\n",
++ mmc_hostname(host->mmc));
++ bcm2835_sdhost_set_clock(host,50*MHZ);
++ mrq->cmd->error = -EILSEQ;
++ mrq->cmd->retries = 1;
++ }
++ }
++
++ host->mrq = NULL;
++ host->cmd = NULL;
++ host->data = NULL;
++
++ mmiowb();
++
++ spin_unlock_irqrestore(&host->lock, flags);
++ mmc_request_done(host->mmc, mrq);
++}
++
++
++
++int bcm2835_sdhost_add_host(struct bcm2835_host *host)
++{
++ struct mmc_host *mmc;
++ struct dma_slave_config cfg;
++ char pio_limit_string[20];
++ int ret;
++
++ mmc = host->mmc;
++
++ bcm2835_sdhost_reset_internal(host);
++
++ mmc->f_max = host->max_clk;
++ mmc->f_min = host->max_clk / SDCDIV_MAX_CDIV;
++
++ mmc->max_busy_timeout = (~(unsigned int)0)/(mmc->f_max/1000);
++
++ pr_debug("f_max %d, f_min %d, max_busy_timeout %d\n",
++ mmc->f_max, mmc->f_min, mmc->max_busy_timeout);
++
++ /* host controller capabilities */
++ mmc->caps |= /* MMC_CAP_SDIO_IRQ |*/ MMC_CAP_4_BIT_DATA |
++ MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
++ MMC_CAP_NEEDS_POLL | MMC_CAP_HW_RESET | MMC_CAP_ERASE |
++ (ALLOW_CMD23 * MMC_CAP_CMD23);
++
++ spin_lock_init(&host->lock);
++
++ if (host->allow_dma) {
++ if (IS_ERR_OR_NULL(host->dma_chan_tx) ||
++ IS_ERR_OR_NULL(host->dma_chan_rx)) {
++ pr_err("%s: unable to initialise DMA channels. "
++ "Falling back to PIO\n",
++ mmc_hostname(mmc));
++ host->have_dma = false;
++ } else {
++ host->have_dma = true;
++
++ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ cfg.slave_id = 13; /* DREQ channel */
++
++ cfg.direction = DMA_MEM_TO_DEV;
++ cfg.src_addr = 0;
++ cfg.dst_addr = host->bus_addr + SDDATA;
++ ret = dmaengine_slave_config(host->dma_chan_tx, &cfg);
++
++ cfg.direction = DMA_DEV_TO_MEM;
++ cfg.src_addr = host->bus_addr + SDDATA;
++ cfg.dst_addr = 0;
++ ret = dmaengine_slave_config(host->dma_chan_rx, &cfg);
++ }
++ } else {
++ host->have_dma = false;
++ }
++
++ mmc->max_segs = 128;
++ mmc->max_req_size = 524288;
++ mmc->max_seg_size = mmc->max_req_size;
++ mmc->max_blk_size = 512;
++ mmc->max_blk_count = 65535;
++
++ /* report supported voltage ranges */
++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
++
++ tasklet_init(&host->finish_tasklet,
++ bcm2835_sdhost_tasklet_finish, (unsigned long)host);
++
++ setup_timer(&host->timer, bcm2835_sdhost_timeout,
++ (unsigned long)host);
++
++ setup_timer(&host->pio_timer, bcm2835_sdhost_pio_timeout,
++ (unsigned long)host);
++
++ bcm2835_sdhost_init(host, 0);
++ ret = request_threaded_irq(host->irq, bcm2835_sdhost_irq,
++ bcm2835_sdhost_thread_irq,
++ IRQF_SHARED, mmc_hostname(mmc), host);
++ if (ret) {
++ pr_err("%s: failed to request IRQ %d: %d\n",
++ mmc_hostname(mmc), host->irq, ret);
++ goto untasklet;
++ }
++
++ mmiowb();
++ mmc_add_host(mmc);
++
++ pio_limit_string[0] = '\0';
++ if (host->have_dma && (host->pio_limit > 0))
++ sprintf(pio_limit_string, " (>%d)", host->pio_limit);
++ pr_info("%s: %s loaded - DMA %s%s\n",
++ mmc_hostname(mmc), DRIVER_NAME,
++ host->have_dma ? "enabled" : "disabled",
++ pio_limit_string);
++
++ return 0;
++
++untasklet:
++ tasklet_kill(&host->finish_tasklet);
++
++ return ret;
++}
++
++static int bcm2835_sdhost_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct device_node *node = dev->of_node;
++ struct clk *clk;
++ struct resource *iomem;
++ struct bcm2835_host *host;
++ struct mmc_host *mmc;
++ const __be32 *addr;
++ int ret;
++
++ pr_debug("bcm2835_sdhost_probe\n");
++ mmc = mmc_alloc_host(sizeof(*host), dev);
++ if (!mmc)
++ return -ENOMEM;
++
++ mmc->ops = &bcm2835_sdhost_ops;
++ host = mmc_priv(mmc);
++ host->mmc = mmc;
++ host->pio_timeout = msecs_to_jiffies(500);
++ host->max_delay = 1; /* Warn if over 1ms */
++ spin_lock_init(&host->lock);
++
++ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ host->ioaddr = devm_ioremap_resource(dev, iomem);
++ if (IS_ERR(host->ioaddr)) {
++ ret = PTR_ERR(host->ioaddr);
++ goto err;
++ }
++
++ addr = of_get_address(node, 0, NULL, NULL);
++ if (!addr) {
++ dev_err(dev, "could not get DMA-register address\n");
++ return -ENODEV;
++ }
++ host->bus_addr = be32_to_cpup(addr);
++ pr_debug(" - ioaddr %lx, iomem->start %lx, bus_addr %lx\n",
++ (unsigned long)host->ioaddr,
++ (unsigned long)iomem->start,
++ (unsigned long)host->bus_addr);
++
++ host->allow_dma = ALLOW_DMA;
++
++ if (node) {
++ /* Read any custom properties */
++ of_property_read_u32(node,
++ "brcm,delay-after-stop",
++ &host->delay_after_stop);
++ of_property_read_u32(node,
++ "brcm,overclock-50",
++ &host->overclock_50);
++ of_property_read_u32(node,
++ "brcm,pio-limit",
++ &host->pio_limit);
++ host->allow_dma = ALLOW_DMA &&
++ !of_property_read_bool(node, "brcm,force-pio");
++ host->debug = of_property_read_bool(node, "brcm,debug");
++ }
++
++ if (host->allow_dma) {
++ if (node) {
++ host->dma_chan_tx =
++ dma_request_slave_channel(dev, "tx");
++ host->dma_chan_rx =
++ dma_request_slave_channel(dev, "rx");
++ } else {
++ dma_cap_mask_t mask;
++
++ dma_cap_zero(mask);
++ /* we don't care about the channel, any would work */
++ dma_cap_set(DMA_SLAVE, mask);
++ host->dma_chan_tx =
++ dma_request_channel(mask, NULL, NULL);
++ host->dma_chan_rx =
++ dma_request_channel(mask, NULL, NULL);
++ }
++ }
++
++ clk = devm_clk_get(dev, NULL);
++ if (IS_ERR(clk)) {
++ dev_err(dev, "could not get clk\n");
++ ret = PTR_ERR(clk);
++ goto err;
++ }
++
++ host->max_clk = clk_get_rate(clk);
++
++ host->irq = platform_get_irq(pdev, 0);
++ if (host->irq <= 0) {
++ dev_err(dev, "get IRQ failed\n");
++ ret = -EINVAL;
++ goto err;
++ }
++
++ pr_debug(" - max_clk %lx, irq %d\n",
++ (unsigned long)host->max_clk,
++ (int)host->irq);
++
++ if (node)
++ mmc_of_parse(mmc);
++ else
++ mmc->caps |= MMC_CAP_4_BIT_DATA;
++
++ ret = bcm2835_sdhost_add_host(host);
++ if (ret)
++ goto err;
++
++ platform_set_drvdata(pdev, host);
++
++ pr_debug("bcm2835_sdhost_probe -> OK\n");
++
++ return 0;
++
++err:
++ pr_debug("bcm2835_sdhost_probe -> err %d\n", ret);
++ mmc_free_host(mmc);
++
++ return ret;
++}
++
++static int bcm2835_sdhost_remove(struct platform_device *pdev)
++{
++ struct bcm2835_host *host = platform_get_drvdata(pdev);
++
++ pr_debug("bcm2835_sdhost_remove\n");
++
++ mmc_remove_host(host->mmc);
++
++ bcm2835_sdhost_set_power(host, false);
++
++ free_irq(host->irq, host);
++
++ del_timer_sync(&host->timer);
++
++ tasklet_kill(&host->finish_tasklet);
++
++ mmc_free_host(host->mmc);
++ platform_set_drvdata(pdev, NULL);
++
++ pr_debug("bcm2835_sdhost_remove - OK\n");
++ return 0;
++}
++
++
++static const struct of_device_id bcm2835_sdhost_match[] = {
++ { .compatible = "brcm,bcm2835-sdhost" },
++ { }
++};
++MODULE_DEVICE_TABLE(of, bcm2835_sdhost_match);
++
++
++
++static struct platform_driver bcm2835_sdhost_driver = {
++ .probe = bcm2835_sdhost_probe,
++ .remove = bcm2835_sdhost_remove,
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = bcm2835_sdhost_match,
++ },
++};
++module_platform_driver(bcm2835_sdhost_driver);
++
++MODULE_ALIAS("platform:sdhost-bcm2835");
++MODULE_DESCRIPTION("BCM2835 SDHost driver");
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Phil Elwell");