aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0781-dtoverlays-Add-overlay-for-the-Sony-IMX219-image-sen.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0781-dtoverlays-Add-overlay-for-the-Sony-IMX219-image-sen.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0781-dtoverlays-Add-overlay-for-the-Sony-IMX219-image-sen.patch180
1 files changed, 0 insertions, 180 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0781-dtoverlays-Add-overlay-for-the-Sony-IMX219-image-sen.patch b/target/linux/brcm2708/patches-4.19/950-0781-dtoverlays-Add-overlay-for-the-Sony-IMX219-image-sen.patch
deleted file mode 100644
index dca8481ec4..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0781-dtoverlays-Add-overlay-for-the-Sony-IMX219-image-sen.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From 7a4d12054b24c8cb980be4c6466b50c14beb78d3 Mon Sep 17 00:00:00 2001
-From: Dave Stevenson <dave.stevenson@raspberrypi.org>
-Date: Wed, 28 Aug 2019 13:35:19 +0100
-Subject: [PATCH 781/806] dtoverlays: Add overlay for the Sony IMX219 image
- sensor.
-
-Adds an overlay for the IMX219 image sensor, connected to the
-Unicam CSI2 receiver peripheral.
-
-Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
----
- arch/arm/boot/dts/overlays/Makefile | 1 +
- arch/arm/boot/dts/overlays/README | 12 ++
- arch/arm/boot/dts/overlays/imx219-overlay.dts | 129 ++++++++++++++++++
- 3 files changed, 142 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/imx219-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -77,6 +77,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- i2c6.dtbo \
- i2s-gpio28-31.dtbo \
- ilitek251x.dtbo \
-+ imx219.dtbo \
- iqaudio-codec.dtbo \
- iqaudio-dac.dtbo \
- iqaudio-dacplus.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1269,6 +1269,18 @@ Params: interrupt GPIO use
- touchscreen (in pixels)
-
-
-+Name: imx219
-+Info: Sony IMX219 camera module.
-+ Uses Unicam 1, which is the standard camera connector on most Pi
-+ variants.
-+Load: dtoverlay=imx219,<param>=<val>
-+Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45.
-+ Useful on Compute Modules.
-+
-+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45.
-+ This is required for Pi B+, 2, 0, and 0W.
-+
-+
- Name: iqaudio-codec
- Info: Configures the IQaudio Codec audio card
- Load: dtoverlay=iqaudio-codec
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/imx219-overlay.dts
-@@ -0,0 +1,129 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+// Definitions for IMX219 camera module on VC I2C bus
-+/dts-v1/;
-+/plugin/;
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/{
-+ compatible = "brcm,bcm2835";
-+
-+ fragment@0 {
-+ target = <&i2c_vc>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ imx219: imx219@10 {
-+ compatible = "sony,imx219";
-+ reg = <0x10>;
-+ status = "okay";
-+
-+ clocks = <&imx219_clk>;
-+ clock-names = "xclk";
-+
-+ VANA-supply = <&imx219_vana>; /* 2.8v */
-+ VDIG-supply = <&imx219_vdig>; /* 1.8v */
-+ VDDL-supply = <&imx219_vddl>; /* 1.2v */
-+
-+ imx219_clk: camera-clk {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <24000000>;
-+ };
-+
-+ port {
-+ imx219_0: endpoint {
-+ remote-endpoint = <&csi1_ep>;
-+ clock-lanes = <0>;
-+ data-lanes = <1 2>;
-+ clock-noncontinuous;
-+ link-frequencies =
-+ /bits/ 64 <297000000>;
-+ };
-+ };
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&csi1>;
-+ __overlay__ {
-+ status = "okay";
-+
-+ port {
-+ csi1_ep: endpoint {
-+ remote-endpoint = <&imx219_0>;
-+ };
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&i2c0_pins>;
-+ __dormant__ {
-+ brcm,pins = <28 29>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+ };
-+ fragment@3 {
-+ target = <&i2c0_pins>;
-+ __overlay__ {
-+ brcm,pins = <44 45>;
-+ brcm,function = <5>; /* alt1 */
-+ };
-+ };
-+ fragment@4 {
-+ target = <&i2c0_pins>;
-+ __dormant__ {
-+ brcm,pins = <0 1>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+ };
-+ fragment@5 {
-+ target = <&i2c_vc>;
-+ __overlay__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@6 {
-+ target-path="/";
-+ __overlay__ {
-+ imx219_vana: fixedregulator@0 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "imx219_vana";
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <2800000>;
-+ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ };
-+ imx219_vdig: fixedregulator@1 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "imx219_vdig";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ };
-+ imx219_vddl: fixedregulator@2 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "imx219_vddl";
-+ regulator-min-microvolt = <1200000>;
-+ regulator-max-microvolt = <1200000>;
-+ };
-+ };
-+ };
-+
-+ fragment@7 {
-+ target-path="/__overrides__";
-+ __overlay__ {
-+ cam0-pwdn-ctrl = <&imx219_vana>,"gpio:0";
-+ cam0-pwdn = <&imx219_vana>,"gpio:4";
-+ };
-+ };
-+
-+ __overrides__ {
-+ i2c_pins_0_1 = <0>,"-2-3+4";
-+ i2c_pins_28_29 = <0>,"+2-3-4";
-+ };
-+};