aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0561-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0561-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0561-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch825
1 files changed, 0 insertions, 825 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0561-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch b/target/linux/brcm2708/patches-4.19/950-0561-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch
deleted file mode 100644
index db6a8d0c6e..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0561-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch
+++ /dev/null
@@ -1,825 +0,0 @@
-From c3005e0dbe1f7f6d93833d5a43b12866873a312f Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric@anholt.net>
-Date: Wed, 12 Dec 2018 15:51:48 -0800
-Subject: [PATCH 561/703] soc: bcm: bcm2835-pm: Add support for power domains
- under a new binding.
-
-This provides a free software alternative to raspberrypi-power.c's
-firmware calls to manage power domains. It also exposes a reset line,
-where previously the vc4 driver had to try to force power off the
-domain in order to trigger a reset.
-
-Signed-off-by: Eric Anholt <eric@anholt.net>
-Acked-by: Rob Herring <robh@kernel.org>
-Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-(cherry picked from commit 670c672608a1ffcbc7ac0f872734843593bb8b15)
----
- drivers/mfd/bcm2835-pm.c | 36 +-
- drivers/soc/bcm/Kconfig | 11 +
- drivers/soc/bcm/Makefile | 1 +
- drivers/soc/bcm/bcm2835-power.c | 661 +++++++++++++++++++++++++++
- include/dt-bindings/soc/bcm2835-pm.h | 28 ++
- include/linux/mfd/bcm2835-pm.h | 1 +
- 6 files changed, 734 insertions(+), 4 deletions(-)
- create mode 100644 drivers/soc/bcm/bcm2835-power.c
- create mode 100644 include/dt-bindings/soc/bcm2835-pm.h
-
---- a/drivers/mfd/bcm2835-pm.c
-+++ b/drivers/mfd/bcm2835-pm.c
-@@ -3,7 +3,7 @@
- * PM MFD driver for Broadcom BCM2835
- *
- * This driver binds to the PM block and creates the MFD device for
-- * the WDT driver.
-+ * the WDT and power drivers.
- */
-
- #include <linux/delay.h>
-@@ -21,11 +21,16 @@ static const struct mfd_cell bcm2835_pm_
- { .name = "bcm2835-wdt" },
- };
-
-+static const struct mfd_cell bcm2835_power_devs[] = {
-+ { .name = "bcm2835-power" },
-+};
-+
- static int bcm2835_pm_probe(struct platform_device *pdev)
- {
- struct resource *res;
- struct device *dev = &pdev->dev;
- struct bcm2835_pm *pm;
-+ int ret;
-
- pm = devm_kzalloc(dev, sizeof(*pm), GFP_KERNEL);
- if (!pm)
-@@ -39,13 +44,36 @@ static int bcm2835_pm_probe(struct platf
- if (IS_ERR(pm->base))
- return PTR_ERR(pm->base);
-
-- return devm_mfd_add_devices(dev, -1,
-- bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs),
-- NULL, 0, NULL);
-+ ret = devm_mfd_add_devices(dev, -1,
-+ bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs),
-+ NULL, 0, NULL);
-+ if (ret)
-+ return ret;
-+
-+ /* We'll use the presence of the AXI ASB regs in the
-+ * bcm2835-pm binding as the key for whether we can reference
-+ * the full PM register range and support power domains.
-+ */
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (res) {
-+ pm->asb = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(pm->asb))
-+ return PTR_ERR(pm->asb);
-+
-+ ret = devm_mfd_add_devices(dev, -1,
-+ bcm2835_power_devs,
-+ ARRAY_SIZE(bcm2835_power_devs),
-+ NULL, 0, NULL);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
- }
-
- static const struct of_device_id bcm2835_pm_of_match[] = {
- { .compatible = "brcm,bcm2835-pm-wdt", },
-+ { .compatible = "brcm,bcm2835-pm", },
- {},
- };
- MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match);
---- a/drivers/soc/bcm/Kconfig
-+++ b/drivers/soc/bcm/Kconfig
-@@ -1,5 +1,16 @@
- menu "Broadcom SoC drivers"
-
-+config BCM2835_POWER
-+ bool "BCM2835 power domain driver"
-+ depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
-+ select PM_GENERIC_DOMAINS if PM
-+ select RESET_CONTROLLER
-+ help
-+ This enables support for the BCM2835 power domains and reset
-+ controller. Any usage of power domains by the Raspberry Pi
-+ firmware means that Linux usage of the same power domain
-+ must be accessed using the RASPBERRYPI_POWER driver
-+
- config RASPBERRYPI_POWER
- bool "Raspberry Pi power domain driver"
- depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
---- a/drivers/soc/bcm/Makefile
-+++ b/drivers/soc/bcm/Makefile
-@@ -1,2 +1,3 @@
-+obj-$(CONFIG_BCM2835_POWER) += bcm2835-power.o
- obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o
- obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
---- /dev/null
-+++ b/drivers/soc/bcm/bcm2835-power.c
-@@ -0,0 +1,661 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Power domain driver for Broadcom BCM2835
-+ *
-+ * Copyright (C) 2018 Broadcom
-+ */
-+
-+#include <dt-bindings/soc/bcm2835-pm.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/mfd/bcm2835-pm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_domain.h>
-+#include <linux/reset-controller.h>
-+#include <linux/types.h>
-+
-+#define PM_GNRIC 0x00
-+#define PM_AUDIO 0x04
-+#define PM_STATUS 0x18
-+#define PM_RSTC 0x1c
-+#define PM_RSTS 0x20
-+#define PM_WDOG 0x24
-+#define PM_PADS0 0x28
-+#define PM_PADS2 0x2c
-+#define PM_PADS3 0x30
-+#define PM_PADS4 0x34
-+#define PM_PADS5 0x38
-+#define PM_PADS6 0x3c
-+#define PM_CAM0 0x44
-+#define PM_CAM0_LDOHPEN BIT(2)
-+#define PM_CAM0_LDOLPEN BIT(1)
-+#define PM_CAM0_CTRLEN BIT(0)
-+
-+#define PM_CAM1 0x48
-+#define PM_CAM1_LDOHPEN BIT(2)
-+#define PM_CAM1_LDOLPEN BIT(1)
-+#define PM_CAM1_CTRLEN BIT(0)
-+
-+#define PM_CCP2TX 0x4c
-+#define PM_CCP2TX_LDOEN BIT(1)
-+#define PM_CCP2TX_CTRLEN BIT(0)
-+
-+#define PM_DSI0 0x50
-+#define PM_DSI0_LDOHPEN BIT(2)
-+#define PM_DSI0_LDOLPEN BIT(1)
-+#define PM_DSI0_CTRLEN BIT(0)
-+
-+#define PM_DSI1 0x54
-+#define PM_DSI1_LDOHPEN BIT(2)
-+#define PM_DSI1_LDOLPEN BIT(1)
-+#define PM_DSI1_CTRLEN BIT(0)
-+
-+#define PM_HDMI 0x58
-+#define PM_HDMI_RSTDR BIT(19)
-+#define PM_HDMI_LDOPD BIT(1)
-+#define PM_HDMI_CTRLEN BIT(0)
-+
-+#define PM_USB 0x5c
-+/* The power gates must be enabled with this bit before enabling the LDO in the
-+ * USB block.
-+ */
-+#define PM_USB_CTRLEN BIT(0)
-+
-+#define PM_PXLDO 0x60
-+#define PM_PXBG 0x64
-+#define PM_DFT 0x68
-+#define PM_SMPS 0x6c
-+#define PM_XOSC 0x70
-+#define PM_SPAREW 0x74
-+#define PM_SPARER 0x78
-+#define PM_AVS_RSTDR 0x7c
-+#define PM_AVS_STAT 0x80
-+#define PM_AVS_EVENT 0x84
-+#define PM_AVS_INTEN 0x88
-+#define PM_DUMMY 0xfc
-+
-+#define PM_IMAGE 0x108
-+#define PM_GRAFX 0x10c
-+#define PM_PROC 0x110
-+#define PM_ENAB BIT(12)
-+#define PM_ISPRSTN BIT(8)
-+#define PM_H264RSTN BIT(7)
-+#define PM_PERIRSTN BIT(6)
-+#define PM_V3DRSTN BIT(6)
-+#define PM_ISFUNC BIT(5)
-+#define PM_MRDONE BIT(4)
-+#define PM_MEMREP BIT(3)
-+#define PM_ISPOW BIT(2)
-+#define PM_POWOK BIT(1)
-+#define PM_POWUP BIT(0)
-+#define PM_INRUSH_SHIFT 13
-+#define PM_INRUSH_3_5_MA 0
-+#define PM_INRUSH_5_MA 1
-+#define PM_INRUSH_10_MA 2
-+#define PM_INRUSH_20_MA 3
-+#define PM_INRUSH_MASK (3 << PM_INRUSH_SHIFT)
-+
-+#define PM_PASSWORD 0x5a000000
-+
-+#define PM_WDOG_TIME_SET 0x000fffff
-+#define PM_RSTC_WRCFG_CLR 0xffffffcf
-+#define PM_RSTS_HADWRH_SET 0x00000040
-+#define PM_RSTC_WRCFG_SET 0x00000030
-+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
-+#define PM_RSTC_RESET 0x00000102
-+
-+#define PM_READ(reg) readl(power->base + (reg))
-+#define PM_WRITE(reg, val) writel(PM_PASSWORD | (val), power->base + (reg))
-+
-+#define ASB_BRDG_VERSION 0x00
-+#define ASB_CPR_CTRL 0x04
-+
-+#define ASB_V3D_S_CTRL 0x08
-+#define ASB_V3D_M_CTRL 0x0c
-+#define ASB_ISP_S_CTRL 0x10
-+#define ASB_ISP_M_CTRL 0x14
-+#define ASB_H264_S_CTRL 0x18
-+#define ASB_H264_M_CTRL 0x1c
-+
-+#define ASB_REQ_STOP BIT(0)
-+#define ASB_ACK BIT(1)
-+#define ASB_EMPTY BIT(2)
-+#define ASB_FULL BIT(3)
-+
-+#define ASB_AXI_BRDG_ID 0x20
-+
-+#define ASB_READ(reg) readl(power->asb + (reg))
-+#define ASB_WRITE(reg, val) writel(PM_PASSWORD | (val), power->asb + (reg))
-+
-+struct bcm2835_power_domain {
-+ struct generic_pm_domain base;
-+ struct bcm2835_power *power;
-+ u32 domain;
-+ struct clk *clk;
-+};
-+
-+struct bcm2835_power {
-+ struct device *dev;
-+ /* PM registers. */
-+ void __iomem *base;
-+ /* AXI Async bridge registers. */
-+ void __iomem *asb;
-+
-+ struct genpd_onecell_data pd_xlate;
-+ struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT];
-+ struct reset_controller_dev reset;
-+};
-+
-+static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
-+{
-+ u64 start = ktime_get_ns();
-+
-+ /* Enable the module's async AXI bridges. */
-+ ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
-+ while (ASB_READ(reg) & ASB_ACK) {
-+ cpu_relax();
-+ if (ktime_get_ns() - start >= 1000)
-+ return -ETIMEDOUT;
-+ }
-+
-+ return 0;
-+}
-+
-+static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
-+{
-+ u64 start = ktime_get_ns();
-+
-+ /* Enable the module's async AXI bridges. */
-+ ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
-+ while (!(ASB_READ(reg) & ASB_ACK)) {
-+ cpu_relax();
-+ if (ktime_get_ns() - start >= 1000)
-+ return -ETIMEDOUT;
-+ }
-+
-+ return 0;
-+}
-+
-+static int bcm2835_power_power_off(struct bcm2835_power_domain *pd, u32 pm_reg)
-+{
-+ struct bcm2835_power *power = pd->power;
-+
-+ /* Enable functional isolation */
-+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISFUNC);
-+
-+ /* Enable electrical isolation */
-+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISPOW);
-+
-+ /* Open the power switches. */
-+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_POWUP);
-+
-+ return 0;
-+}
-+
-+static int bcm2835_power_power_on(struct bcm2835_power_domain *pd, u32 pm_reg)
-+{
-+ struct bcm2835_power *power = pd->power;
-+ struct device *dev = power->dev;
-+ u64 start;
-+ int ret;
-+ int inrush;
-+ bool powok;
-+
-+ /* If it was already powered on by the fw, leave it that way. */
-+ if (PM_READ(pm_reg) & PM_POWUP)
-+ return 0;
-+
-+ /* Enable power. Allowing too much current at once may result
-+ * in POWOK never getting set, so start low and ramp it up as
-+ * necessary to succeed.
-+ */
-+ powok = false;
-+ for (inrush = PM_INRUSH_3_5_MA; inrush <= PM_INRUSH_20_MA; inrush++) {
-+ PM_WRITE(pm_reg,
-+ (PM_READ(pm_reg) & ~PM_INRUSH_MASK) |
-+ (inrush << PM_INRUSH_SHIFT) |
-+ PM_POWUP);
-+
-+ start = ktime_get_ns();
-+ while (!(powok = !!(PM_READ(pm_reg) & PM_POWOK))) {
-+ cpu_relax();
-+ if (ktime_get_ns() - start >= 3000)
-+ break;
-+ }
-+ }
-+ if (!powok) {
-+ dev_err(dev, "Timeout waiting for %s power OK\n",
-+ pd->base.name);
-+ ret = -ETIMEDOUT;
-+ goto err_disable_powup;
-+ }
-+
-+ /* Disable electrical isolation */
-+ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_ISPOW);
-+
-+ /* Repair memory */
-+ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_MEMREP);
-+ start = ktime_get_ns();
-+ while (!(PM_READ(pm_reg) & PM_MRDONE)) {
-+ cpu_relax();
-+ if (ktime_get_ns() - start >= 1000) {
-+ dev_err(dev, "Timeout waiting for %s memory repair\n",
-+ pd->base.name);
-+ ret = -ETIMEDOUT;
-+ goto err_disable_ispow;
-+ }
-+ }
-+
-+ /* Disable functional isolation */
-+ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_ISFUNC);
-+
-+ return 0;
-+
-+err_disable_ispow:
-+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISPOW);
-+err_disable_powup:
-+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~(PM_POWUP | PM_INRUSH_MASK));
-+ return ret;
-+}
-+
-+static int bcm2835_asb_power_on(struct bcm2835_power_domain *pd,
-+ u32 pm_reg,
-+ u32 asb_m_reg,
-+ u32 asb_s_reg,
-+ u32 reset_flags)
-+{
-+ struct bcm2835_power *power = pd->power;
-+ int ret;
-+
-+ ret = clk_prepare_enable(pd->clk);
-+ if (ret) {
-+ dev_err(power->dev, "Failed to enable clock for %s\n",
-+ pd->base.name);
-+ return ret;
-+ }
-+
-+ /* Wait 32 clocks for reset to propagate, 1 us will be enough */
-+ udelay(1);
-+
-+ clk_disable_unprepare(pd->clk);
-+
-+ /* Deassert the resets. */
-+ PM_WRITE(pm_reg, PM_READ(pm_reg) | reset_flags);
-+
-+ ret = clk_prepare_enable(pd->clk);
-+ if (ret) {
-+ dev_err(power->dev, "Failed to enable clock for %s\n",
-+ pd->base.name);
-+ goto err_enable_resets;
-+ }
-+
-+ ret = bcm2835_asb_enable(power, asb_m_reg);
-+ if (ret) {
-+ dev_err(power->dev, "Failed to enable ASB master for %s\n",
-+ pd->base.name);
-+ goto err_disable_clk;
-+ }
-+ ret = bcm2835_asb_enable(power, asb_s_reg);
-+ if (ret) {
-+ dev_err(power->dev, "Failed to enable ASB slave for %s\n",
-+ pd->base.name);
-+ goto err_disable_asb_master;
-+ }
-+
-+ return 0;
-+
-+err_disable_asb_master:
-+ bcm2835_asb_disable(power, asb_m_reg);
-+err_disable_clk:
-+ clk_disable_unprepare(pd->clk);
-+err_enable_resets:
-+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~reset_flags);
-+ return ret;
-+}
-+
-+static int bcm2835_asb_power_off(struct bcm2835_power_domain *pd,
-+ u32 pm_reg,
-+ u32 asb_m_reg,
-+ u32 asb_s_reg,
-+ u32 reset_flags)
-+{
-+ struct bcm2835_power *power = pd->power;
-+ int ret;
-+
-+ ret = bcm2835_asb_disable(power, asb_s_reg);
-+ if (ret) {
-+ dev_warn(power->dev, "Failed to disable ASB slave for %s\n",
-+ pd->base.name);
-+ return ret;
-+ }
-+ ret = bcm2835_asb_disable(power, asb_m_reg);
-+ if (ret) {
-+ dev_warn(power->dev, "Failed to disable ASB master for %s\n",
-+ pd->base.name);
-+ bcm2835_asb_enable(power, asb_s_reg);
-+ return ret;
-+ }
-+
-+ clk_disable_unprepare(pd->clk);
-+
-+ /* Assert the resets. */
-+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~reset_flags);
-+
-+ return 0;
-+}
-+
-+static int bcm2835_power_pd_power_on(struct generic_pm_domain *domain)
-+{
-+ struct bcm2835_power_domain *pd =
-+ container_of(domain, struct bcm2835_power_domain, base);
-+ struct bcm2835_power *power = pd->power;
-+
-+ switch (pd->domain) {
-+ case BCM2835_POWER_DOMAIN_GRAFX:
-+ return bcm2835_power_power_on(pd, PM_GRAFX);
-+
-+ case BCM2835_POWER_DOMAIN_GRAFX_V3D:
-+ return bcm2835_asb_power_on(pd, PM_GRAFX,
-+ ASB_V3D_M_CTRL, ASB_V3D_S_CTRL,
-+ PM_V3DRSTN);
-+
-+ case BCM2835_POWER_DOMAIN_IMAGE:
-+ return bcm2835_power_power_on(pd, PM_IMAGE);
-+
-+ case BCM2835_POWER_DOMAIN_IMAGE_PERI:
-+ return bcm2835_asb_power_on(pd, PM_IMAGE,
-+ 0, 0,
-+ PM_PERIRSTN);
-+
-+ case BCM2835_POWER_DOMAIN_IMAGE_ISP:
-+ return bcm2835_asb_power_on(pd, PM_IMAGE,
-+ ASB_ISP_M_CTRL, ASB_ISP_S_CTRL,
-+ PM_ISPRSTN);
-+
-+ case BCM2835_POWER_DOMAIN_IMAGE_H264:
-+ return bcm2835_asb_power_on(pd, PM_IMAGE,
-+ ASB_H264_M_CTRL, ASB_H264_S_CTRL,
-+ PM_H264RSTN);
-+
-+ case BCM2835_POWER_DOMAIN_USB:
-+ PM_WRITE(PM_USB, PM_USB_CTRLEN);
-+ return 0;
-+
-+ case BCM2835_POWER_DOMAIN_DSI0:
-+ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN);
-+ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN | PM_DSI0_LDOHPEN);
-+ return 0;
-+
-+ case BCM2835_POWER_DOMAIN_DSI1:
-+ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN);
-+ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN | PM_DSI1_LDOHPEN);
-+ return 0;
-+
-+ case BCM2835_POWER_DOMAIN_CCP2TX:
-+ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN);
-+ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN | PM_CCP2TX_LDOEN);
-+ return 0;
-+
-+ case BCM2835_POWER_DOMAIN_HDMI:
-+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_RSTDR);
-+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_CTRLEN);
-+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_LDOPD);
-+ usleep_range(100, 200);
-+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_RSTDR);
-+ return 0;
-+
-+ default:
-+ dev_err(power->dev, "Invalid domain %d\n", pd->domain);
-+ return -EINVAL;
-+ }
-+}
-+
-+static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain)
-+{
-+ struct bcm2835_power_domain *pd =
-+ container_of(domain, struct bcm2835_power_domain, base);
-+ struct bcm2835_power *power = pd->power;
-+
-+ switch (pd->domain) {
-+ case BCM2835_POWER_DOMAIN_GRAFX:
-+ return bcm2835_power_power_off(pd, PM_GRAFX);
-+
-+ case BCM2835_POWER_DOMAIN_GRAFX_V3D:
-+ return bcm2835_asb_power_off(pd, PM_GRAFX,
-+ ASB_V3D_M_CTRL, ASB_V3D_S_CTRL,
-+ PM_V3DRSTN);
-+
-+ case BCM2835_POWER_DOMAIN_IMAGE:
-+ return bcm2835_power_power_off(pd, PM_IMAGE);
-+
-+ case BCM2835_POWER_DOMAIN_IMAGE_PERI:
-+ return bcm2835_asb_power_off(pd, PM_IMAGE,
-+ 0, 0,
-+ PM_PERIRSTN);
-+
-+ case BCM2835_POWER_DOMAIN_IMAGE_ISP:
-+ return bcm2835_asb_power_off(pd, PM_IMAGE,
-+ ASB_ISP_M_CTRL, ASB_ISP_S_CTRL,
-+ PM_ISPRSTN);
-+
-+ case BCM2835_POWER_DOMAIN_IMAGE_H264:
-+ return bcm2835_asb_power_off(pd, PM_IMAGE,
-+ ASB_H264_M_CTRL, ASB_H264_S_CTRL,
-+ PM_H264RSTN);
-+
-+ case BCM2835_POWER_DOMAIN_USB:
-+ PM_WRITE(PM_USB, 0);
-+ return 0;
-+
-+ case BCM2835_POWER_DOMAIN_DSI0:
-+ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN);
-+ PM_WRITE(PM_DSI0, 0);
-+ return 0;
-+
-+ case BCM2835_POWER_DOMAIN_DSI1:
-+ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN);
-+ PM_WRITE(PM_DSI1, 0);
-+ return 0;
-+
-+ case BCM2835_POWER_DOMAIN_CCP2TX:
-+ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN);
-+ PM_WRITE(PM_CCP2TX, 0);
-+ return 0;
-+
-+ case BCM2835_POWER_DOMAIN_HDMI:
-+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_LDOPD);
-+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_CTRLEN);
-+ return 0;
-+
-+ default:
-+ dev_err(power->dev, "Invalid domain %d\n", pd->domain);
-+ return -EINVAL;
-+ }
-+}
-+
-+static void
-+bcm2835_init_power_domain(struct bcm2835_power *power,
-+ int pd_xlate_index, const char *name)
-+{
-+ struct device *dev = power->dev;
-+ struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index];
-+
-+ dom->clk = devm_clk_get(dev->parent, name);
-+
-+ dom->base.name = name;
-+ dom->base.power_on = bcm2835_power_pd_power_on;
-+ dom->base.power_off = bcm2835_power_pd_power_off;
-+
-+ dom->domain = pd_xlate_index;
-+ dom->power = power;
-+
-+ /* XXX: on/off at boot? */
-+ pm_genpd_init(&dom->base, NULL, true);
-+
-+ power->pd_xlate.domains[pd_xlate_index] = &dom->base;
-+}
-+
-+/** bcm2835_reset_reset - Resets a block that has a reset line in the
-+ * PM block.
-+ *
-+ * The consumer of the reset controller must have the power domain up
-+ * -- there's no reset ability with the power domain down. To reset
-+ * the sub-block, we just disable its access to memory through the
-+ * ASB, reset, and re-enable.
-+ */
-+static int bcm2835_reset_reset(struct reset_controller_dev *rcdev,
-+ unsigned long id)
-+{
-+ struct bcm2835_power *power = container_of(rcdev, struct bcm2835_power,
-+ reset);
-+ struct bcm2835_power_domain *pd;
-+ int ret;
-+
-+ switch (id) {
-+ case BCM2835_RESET_V3D:
-+ pd = &power->domains[BCM2835_POWER_DOMAIN_GRAFX_V3D];
-+ break;
-+ case BCM2835_RESET_H264:
-+ pd = &power->domains[BCM2835_POWER_DOMAIN_IMAGE_H264];
-+ break;
-+ case BCM2835_RESET_ISP:
-+ pd = &power->domains[BCM2835_POWER_DOMAIN_IMAGE_ISP];
-+ break;
-+ default:
-+ dev_err(power->dev, "Bad reset id %ld\n", id);
-+ return -EINVAL;
-+ }
-+
-+ ret = bcm2835_power_pd_power_off(&pd->base);
-+ if (ret)
-+ return ret;
-+
-+ return bcm2835_power_pd_power_on(&pd->base);
-+}
-+
-+static int bcm2835_reset_status(struct reset_controller_dev *rcdev,
-+ unsigned long id)
-+{
-+ struct bcm2835_power *power = container_of(rcdev, struct bcm2835_power,
-+ reset);
-+
-+ switch (id) {
-+ case BCM2835_RESET_V3D:
-+ return !PM_READ(PM_GRAFX & PM_V3DRSTN);
-+ case BCM2835_RESET_H264:
-+ return !PM_READ(PM_IMAGE & PM_H264RSTN);
-+ case BCM2835_RESET_ISP:
-+ return !PM_READ(PM_IMAGE & PM_ISPRSTN);
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+const struct reset_control_ops bcm2835_reset_ops = {
-+ .reset = bcm2835_reset_reset,
-+ .status = bcm2835_reset_status,
-+};
-+
-+static const char *const power_domain_names[] = {
-+ [BCM2835_POWER_DOMAIN_GRAFX] = "grafx",
-+ [BCM2835_POWER_DOMAIN_GRAFX_V3D] = "v3d",
-+
-+ [BCM2835_POWER_DOMAIN_IMAGE] = "image",
-+ [BCM2835_POWER_DOMAIN_IMAGE_PERI] = "peri_image",
-+ [BCM2835_POWER_DOMAIN_IMAGE_H264] = "h264",
-+ [BCM2835_POWER_DOMAIN_IMAGE_ISP] = "isp",
-+
-+ [BCM2835_POWER_DOMAIN_USB] = "usb",
-+ [BCM2835_POWER_DOMAIN_DSI0] = "dsi0",
-+ [BCM2835_POWER_DOMAIN_DSI1] = "dsi1",
-+ [BCM2835_POWER_DOMAIN_CAM0] = "cam0",
-+ [BCM2835_POWER_DOMAIN_CAM1] = "cam1",
-+ [BCM2835_POWER_DOMAIN_CCP2TX] = "ccp2tx",
-+ [BCM2835_POWER_DOMAIN_HDMI] = "hdmi",
-+};
-+
-+static int bcm2835_power_probe(struct platform_device *pdev)
-+{
-+ struct bcm2835_pm *pm = dev_get_drvdata(pdev->dev.parent);
-+ struct device *dev = &pdev->dev;
-+ struct bcm2835_power *power;
-+ static const struct {
-+ int parent, child;
-+ } domain_deps[] = {
-+ { BCM2835_POWER_DOMAIN_GRAFX, BCM2835_POWER_DOMAIN_GRAFX_V3D },
-+ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_PERI },
-+ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_H264 },
-+ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_ISP },
-+ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_USB },
-+ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 },
-+ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 },
-+ };
-+ int ret, i;
-+ u32 id;
-+
-+ power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL);
-+ if (!power)
-+ return -ENOMEM;
-+ platform_set_drvdata(pdev, power);
-+
-+ power->dev = dev;
-+ power->base = pm->base;
-+ power->asb = pm->asb;
-+
-+ id = ASB_READ(ASB_AXI_BRDG_ID);
-+ if (id != 0x62726467 /* "BRDG" */) {
-+ dev_err(dev, "ASB register ID returned 0x%08x\n", id);
-+ return -ENODEV;
-+ }
-+
-+ power->pd_xlate.domains = devm_kcalloc(dev,
-+ ARRAY_SIZE(power_domain_names),
-+ sizeof(*power->pd_xlate.domains),
-+ GFP_KERNEL);
-+ if (!power->pd_xlate.domains)
-+ return -ENOMEM;
-+
-+ power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names);
-+
-+ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++)
-+ bcm2835_init_power_domain(power, i, power_domain_names[i]);
-+
-+ for (i = 0; i < ARRAY_SIZE(domain_deps); i++) {
-+ pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base,
-+ &power->domains[domain_deps[i].child].base);
-+ }
-+
-+ power->reset.owner = THIS_MODULE;
-+ power->reset.nr_resets = BCM2835_RESET_COUNT;
-+ power->reset.ops = &bcm2835_reset_ops;
-+ power->reset.of_node = dev->parent->of_node;
-+
-+ ret = devm_reset_controller_register(dev, &power->reset);
-+ if (ret)
-+ return ret;
-+
-+ of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate);
-+
-+ dev_info(dev, "Broadcom BCM2835 power domains driver");
-+ return 0;
-+}
-+
-+static int bcm2835_power_remove(struct platform_device *pdev)
-+{
-+ return 0;
-+}
-+
-+static struct platform_driver bcm2835_power_driver = {
-+ .probe = bcm2835_power_probe,
-+ .remove = bcm2835_power_remove,
-+ .driver = {
-+ .name = "bcm2835-power",
-+ },
-+};
-+module_platform_driver(bcm2835_power_driver);
-+
-+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
-+MODULE_DESCRIPTION("Driver for Broadcom BCM2835 PM power domains and reset");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/include/dt-bindings/soc/bcm2835-pm.h
-@@ -0,0 +1,28 @@
-+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
-+
-+#ifndef _DT_BINDINGS_ARM_BCM2835_PM_H
-+#define _DT_BINDINGS_ARM_BCM2835_PM_H
-+
-+#define BCM2835_POWER_DOMAIN_GRAFX 0
-+#define BCM2835_POWER_DOMAIN_GRAFX_V3D 1
-+#define BCM2835_POWER_DOMAIN_IMAGE 2
-+#define BCM2835_POWER_DOMAIN_IMAGE_PERI 3
-+#define BCM2835_POWER_DOMAIN_IMAGE_ISP 4
-+#define BCM2835_POWER_DOMAIN_IMAGE_H264 5
-+#define BCM2835_POWER_DOMAIN_USB 6
-+#define BCM2835_POWER_DOMAIN_DSI0 7
-+#define BCM2835_POWER_DOMAIN_DSI1 8
-+#define BCM2835_POWER_DOMAIN_CAM0 9
-+#define BCM2835_POWER_DOMAIN_CAM1 10
-+#define BCM2835_POWER_DOMAIN_CCP2TX 11
-+#define BCM2835_POWER_DOMAIN_HDMI 12
-+
-+#define BCM2835_POWER_DOMAIN_COUNT 13
-+
-+#define BCM2835_RESET_V3D 0
-+#define BCM2835_RESET_ISP 1
-+#define BCM2835_RESET_H264 2
-+
-+#define BCM2835_RESET_COUNT 3
-+
-+#endif /* _DT_BINDINGS_ARM_BCM2835_PM_H */
---- a/include/linux/mfd/bcm2835-pm.h
-+++ b/include/linux/mfd/bcm2835-pm.h
-@@ -8,6 +8,7 @@
- struct bcm2835_pm {
- struct device *dev;
- void __iomem *base;
-+ void __iomem *asb;
- };
-
- #endif /* BCM2835_MFD_PM_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-02 14:56:27 +0000