diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0274-overlays-Add-ds1621-to-the-i2c-sensor-overlay.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-4.14/950-0274-overlays-Add-ds1621-to-the-i2c-sensor-overlay.patch | 97 |
1 files changed, 0 insertions, 97 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0274-overlays-Add-ds1621-to-the-i2c-sensor-overlay.patch b/target/linux/brcm2708/patches-4.14/950-0274-overlays-Add-ds1621-to-the-i2c-sensor-overlay.patch deleted file mode 100644 index fb0298c52c..0000000000 --- a/target/linux/brcm2708/patches-4.14/950-0274-overlays-Add-ds1621-to-the-i2c-sensor-overlay.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 3c258618cbc0cddb7076b61a08755aa4f73d27db Mon Sep 17 00:00:00 2001 -From: Phil Elwell <phil@raspberrypi.org> -Date: Sun, 15 Apr 2018 10:36:15 +0100 -Subject: [PATCH 274/454] overlays: Add ds1621 to the i2c-sensor overlay - -The ds1621 enables the Dallas Semiconductors DS1621 temperature -sensor. - -See: https://github.com/raspberrypi/linux/issues/2509 - -Signed-off-by: Phil Elwell <phil@raspberrypi.org> ---- - arch/arm/boot/dts/overlays/README | 15 +++++++++------ - .../boot/dts/overlays/i2c-sensor-overlay.dts | 19 ++++++++++++++++++- - 2 files changed, 27 insertions(+), 7 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -821,8 +821,8 @@ Name: i2c-sensor - Info: Adds support for a number of I2C barometric pressure and temperature - sensors on i2c_arm - Load: dtoverlay=i2c-sensor,<param>=<val> --Params: addr Set the address for the BME280, BMP280, TMP102, -- HDC100X, LM75 or SHT3x -+Params: addr Set the address for the BME280, BMP280, DS1621, -+ HDC100X, LM75, SHT3x or TMP102 - - bme280 Select the Bosch Sensortronic BME280 - Valid addresses 0x76-0x77, default 0x76 -@@ -834,6 +834,9 @@ Params: addr Set the - bmp280 Select the Bosch Sensortronic BMP280 - Valid addresses 0x76-0x77, default 0x76 - -+ ds1621 Select the Dallas Semiconductors DS1621 temp -+ sensor. Valid addresses 0x48-9x4f, default 0x48 -+ - hdc100x Select the Texas Instruments HDC100x temp sensor - Valid addresses 0x40-0x43, default 0x40 - -@@ -844,6 +847,10 @@ Params: addr Set the - - lm75addr Deprecated - use addr parameter instead - -+ sht3x Select the Sensiron SHT3x temperature and -+ humidity sensor. Valid addresses 0x44-0x45, -+ default 0x44 -+ - si7020 Select the Silicon Labs Si7013/20/21 humidity/ - temperature sensor - -@@ -856,10 +863,6 @@ Params: addr Set the - veml6070 Select the Vishay VEML6070 ultraviolet light - sensor - -- sht3x Select the Sensiron SHT3x temperature and -- humidity sensor. Valid addresses 0x44-0x45, -- default 0x44 -- - - Name: i2c0-bcm2708 - Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations ---- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -@@ -186,9 +186,25 @@ - }; - }; - -+ fragment@12 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ds1621: ds1621@48 { -+ compatible = "ds1621"; -+ reg = <0x48>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ - __overrides__ { - addr = <&bme280>,"reg:0", <&bmp280>,"reg:0", <&tmp102>,"reg:0", -- <&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0"; -+ <&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0", -+ <&ds1621>,"reg:0"; - bme280 = <0>,"+0"; - bmp085 = <0>,"+1"; - bmp180 = <0>,"+2"; -@@ -202,5 +218,6 @@ - tsl4531 = <0>,"+9"; - veml6070 = <0>,"+10"; - sht3x = <0>,"+11"; -+ ds1621 = <0>,"+12"; - }; - }; |