aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm63xx/patches-5.10/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm63xx/patches-5.10/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch')
-rw-r--r--target/linux/bcm63xx/patches-5.10/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch247
1 files changed, 0 insertions, 247 deletions
diff --git a/target/linux/bcm63xx/patches-5.10/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/bcm63xx/patches-5.10/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
deleted file mode 100644
index 44cbf75fe3..0000000000
--- a/target/linux/bcm63xx/patches-5.10/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
+++ /dev/null
@@ -1,247 +0,0 @@
-From 7fa63fdde703aaabaa7199ae879219737a98a3f3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 6 Jan 2012 12:24:18 +0100
-Subject: [PATCH] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
-
-Only connect/disconnect the phy during probe and remove, not during any
-open/close. The phy seldom changes during the runtime, and disconnecting
-the phy during close will prevent it from keeping any configuration over
-a down/up cycle.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 158 +++++++++++++--------------
- 1 file changed, 78 insertions(+), 80 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -892,10 +892,8 @@ static int bcm_enet_open(struct net_devi
- struct bcm_enet_priv *priv;
- struct sockaddr addr;
- struct device *kdev;
-- struct phy_device *phydev;
- int i, ret;
- unsigned int size;
-- char phy_id[MII_BUS_ID_SIZE + 3];
- void *p;
- u32 val;
-
-@@ -903,31 +901,10 @@ static int bcm_enet_open(struct net_devi
- kdev = &priv->pdev->dev;
-
- if (priv->has_phy) {
-- /* connect to PHY */
-- snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-- priv->mii_bus->id, priv->phy_id);
--
-- phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
-- PHY_INTERFACE_MODE_MII);
--
-- if (IS_ERR(phydev)) {
-- dev_err(kdev, "could not attach to PHY\n");
-- return PTR_ERR(phydev);
-- }
--
-- /* mask with MAC supported features */
-- phy_support_sym_pause(phydev);
-- phy_set_max_speed(phydev, SPEED_100);
-- phy_set_sym_pause(phydev, priv->pause_rx, priv->pause_rx,
-- priv->pause_auto);
--
-- phy_attached_info(phydev);
--
-+ /* Reset state */
- priv->old_link = 0;
- priv->old_duplex = -1;
- priv->old_pause = -1;
-- } else {
-- phydev = NULL;
- }
-
- /* mask all interrupts and request them */
-@@ -937,7 +914,7 @@ static int bcm_enet_open(struct net_devi
-
- ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
- if (ret)
-- goto out_phy_disconnect;
-+ return ret;
-
- ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
- dev->name, dev);
-@@ -1099,8 +1076,8 @@ static int bcm_enet_open(struct net_devi
- enet_dmac_writel(priv, priv->dma_chan_int_mask,
- ENETDMAC_IRMASK, priv->tx_chan);
-
-- if (phydev)
-- phy_start(phydev);
-+ if (priv->has_phy)
-+ phy_start(dev->phydev);
- else
- bcm_enet_adjust_link(dev);
-
-@@ -1130,10 +1107,6 @@ out_freeirq_rx:
- out_freeirq:
- free_irq(dev->irq, dev);
-
--out_phy_disconnect:
-- if (phydev)
-- phy_disconnect(phydev);
--
- return ret;
- }
-
-@@ -1226,10 +1199,6 @@ static int bcm_enet_stop(struct net_devi
- free_irq(priv->irq_rx, dev);
- free_irq(dev->irq, dev);
-
-- /* release phy */
-- if (priv->has_phy)
-- phy_disconnect(dev->phydev);
--
- /* reset BQL after forced tx reclaim to not kernel panic */
- netdev_reset_queue(dev);
-
-@@ -1797,14 +1766,47 @@ static int bcm_enet_probe(struct platfor
-
- /* do minimal hardware init to be able to probe mii bus */
- bcm_enet_hw_preinit(priv);
-+ spin_lock_init(&priv->rx_lock);
-+
-+ /* init rx timeout (used for oom) */
-+ timer_setup(&priv->rx_timeout, bcm_enet_refill_rx_timer, 0);
-+
-+ /* init the mib update lock&work */
-+ mutex_init(&priv->mib_update_lock);
-+ INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
-+
-+ /* zero mib counters */
-+ for (i = 0; i < ENET_MIB_REG_COUNT; i++)
-+ enet_writel(priv, 0, ENET_MIB_REG(i));
-+
-+ /* register netdevice */
-+ dev->netdev_ops = &bcm_enet_ops;
-+ netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
-+
-+ dev->ethtool_ops = &bcm_enet_ethtool_ops;
-+ /* MTU range: 46 - 2028 */
-+ dev->min_mtu = ETH_ZLEN - ETH_HLEN;
-+ dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
-+ SET_NETDEV_DEV(dev, &pdev->dev);
-+
-+ ret = register_netdev(dev);
-+ if (ret)
-+ goto out_uninit_hw;
-+
-+ netif_carrier_off(dev);
-+ platform_set_drvdata(pdev, dev);
-+ priv->pdev = pdev;
-+ priv->net_dev = dev;
-
- /* MII bus registration */
- if (priv->has_phy) {
-+ struct phy_device *phydev;
-+ char phy_id[MII_BUS_ID_SIZE + 3];
-
- priv->mii_bus = mdiobus_alloc();
- if (!priv->mii_bus) {
- ret = -ENOMEM;
-- goto out_uninit_hw;
-+ goto out_unregister_netdev;
- }
-
- bus = priv->mii_bus;
-@@ -1828,6 +1830,26 @@ static int bcm_enet_probe(struct platfor
- dev_err(&pdev->dev, "unable to register mdio bus\n");
- goto out_free_mdio;
- }
-+
-+ /* connect to PHY */
-+ snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-+ priv->mii_bus->id, priv->phy_id);
-+
-+ phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
-+ PHY_INTERFACE_MODE_MII);
-+
-+ if (IS_ERR(phydev)) {
-+ dev_err(&pdev->dev, "could not attach to PHY\n");
-+ goto out_unregister_mdio;
-+ }
-+
-+ /* mask with MAC supported features */
-+ phy_support_sym_pause(phydev);
-+ phy_set_max_speed(phydev, SPEED_100);
-+ phy_set_sym_pause(phydev, priv->pause_rx, priv->pause_rx,
-+ priv->pause_auto);
-+
-+ phy_attached_info(phydev);
- } else {
-
- /* run platform code to initialize PHY device */
-@@ -1835,45 +1857,16 @@ static int bcm_enet_probe(struct platfor
- pd->mii_config(dev, 1, bcm_enet_mdio_read_mii,
- bcm_enet_mdio_write_mii)) {
- dev_err(&pdev->dev, "unable to configure mdio bus\n");
-- goto out_uninit_hw;
-+ goto out_unregister_netdev;
- }
- }
-
-- spin_lock_init(&priv->rx_lock);
--
-- /* init rx timeout (used for oom) */
-- timer_setup(&priv->rx_timeout, bcm_enet_refill_rx_timer, 0);
--
-- /* init the mib update lock&work */
-- mutex_init(&priv->mib_update_lock);
-- INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
--
-- /* zero mib counters */
-- for (i = 0; i < ENET_MIB_REG_COUNT; i++)
-- enet_writel(priv, 0, ENET_MIB_REG(i));
--
-- /* register netdevice */
-- dev->netdev_ops = &bcm_enet_ops;
-- netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
--
-- dev->ethtool_ops = &bcm_enet_ethtool_ops;
-- /* MTU range: 46 - 2028 */
-- dev->min_mtu = ETH_ZLEN - ETH_HLEN;
-- dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
-- SET_NETDEV_DEV(dev, &pdev->dev);
--
-- ret = register_netdev(dev);
-- if (ret)
-- goto out_unregister_mdio;
--
-- netif_carrier_off(dev);
-- platform_set_drvdata(pdev, dev);
-- priv->pdev = pdev;
-- priv->net_dev = dev;
--
- return 0;
-
- out_unregister_mdio:
-+ if (dev->phydev)
-+ phy_disconnect(dev->phydev);
-+
- if (priv->mii_bus)
- mdiobus_unregister(priv->mii_bus);
-
-@@ -1881,6 +1874,9 @@ out_free_mdio:
- if (priv->mii_bus)
- mdiobus_free(priv->mii_bus);
-
-+out_unregister_netdev:
-+ unregister_netdev(dev);
-+
- out_uninit_hw:
- /* turn off mdc clock */
- enet_writel(priv, 0, ENET_MIISC_REG);
-@@ -1911,6 +1907,7 @@ static int bcm_enet_remove(struct platfo
- enet_writel(priv, 0, ENET_MIISC_REG);
-
- if (priv->has_phy) {
-+ phy_disconnect(dev->phydev);
- mdiobus_unregister(priv->mii_bus);
- mdiobus_free(priv->mii_bus);
- } else {
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-08 07:51:37 +0000