diff options
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0968-overlays-Add-parameters-to-adafruit18-sainsmart18.patch')
| -rw-r--r-- | target/linux/bcm27xx/patches-5.4/950-0968-overlays-Add-parameters-to-adafruit18-sainsmart18.patch | 94 |
1 files changed, 0 insertions, 94 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0968-overlays-Add-parameters-to-adafruit18-sainsmart18.patch b/target/linux/bcm27xx/patches-5.4/950-0968-overlays-Add-parameters-to-adafruit18-sainsmart18.patch deleted file mode 100644 index 99ef611fe3..0000000000 --- a/target/linux/bcm27xx/patches-5.4/950-0968-overlays-Add-parameters-to-adafruit18-sainsmart18.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 9249fb1ac6b8bfcc0056fe2a871d4965b774c667 Mon Sep 17 00:00:00 2001 -From: Phil Elwell <phil@raspberrypi.com> -Date: Mon, 14 Sep 2020 15:48:16 +0100 -Subject: [PATCH] overlays: Add parameters to adafruit18, sainsmart18 - -Also fix polarity of the reset GPIO. - -Signed-off-by: Phil Elwell <phil@raspberrypi.com> ---- - arch/arm/boot/dts/overlays/README | 13 +++++++++++++ - arch/arm/boot/dts/overlays/adafruit18-overlay.dts | 11 +++++++++-- - arch/arm/boot/dts/overlays/sainsmart18-overlay.dts | 10 ++++++++-- - 3 files changed, 30 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -267,6 +267,13 @@ Info: Overlay for the SPI-connected Ad - Load: dtoverlay=adafruit18,<param>=<val> - Params: green Use the adafruit18_green variant. - rotate Display rotation {0,90,180,270} -+ speed SPI bus speed in Hz (default 4000000) -+ fps Display frame rate in Hz -+ bgr Enable BGR mode (default on) -+ debug Debug output level {0-7} -+ dc_pin GPIO pin for D/C (default 24) -+ reset_pin GPIO pin for RESET (default 25) -+ led_pin GPIO used to control backlight (default 18) - - - Name: adau1977-adc -@@ -2271,6 +2278,12 @@ Info: Overlay for the SPI-connected Sa - ST7735R chip). - Load: dtoverlay=sainsmart18,<param>=<val> - Params: rotate Display rotation {0,90,180,270} -+ speed SPI bus speed in Hz (default 4000000) -+ fps Display frame rate in Hz -+ bgr Enable BGR mode (default on) -+ debug Debug output level {0-7} -+ dc_pin GPIO pin for D/C (default 24) -+ reset_pin GPIO pin for RESET (default 25) - - - Name: sc16is750-i2c ---- a/arch/arm/boot/dts/overlays/adafruit18-overlay.dts -+++ b/arch/arm/boot/dts/overlays/adafruit18-overlay.dts -@@ -33,7 +33,7 @@ - fps = <50>; - height = <160>; - width = <128>; -- reset-gpios = <&gpio 25 0>; -+ reset-gpios = <&gpio 25 1>; - dc-gpios = <&gpio 24 0>; - led-gpios = <&gpio 18 0>; - bgr; -@@ -44,6 +44,13 @@ - - __overrides__ { - green = <&af18>, "compatible=fbtft,adafruit18_green"; -- rotate = <&af18>, "rotate:0"; -+ speed = <&af18>,"spi-max-frequency:0"; -+ rotate = <&af18>,"rotate:0"; -+ fps = <&af18>,"fps:0"; -+ bgr = <&af18>,"bgr?"; -+ debug = <&af18>,"debug:0"; -+ dc_pin = <&af18>,"dc-gpios:4"; -+ reset_pin = <&af18>,"reset-gpios:4"; -+ led_pin = <&af18>,"led-gpios:4"; - }; - }; ---- a/arch/arm/boot/dts/overlays/sainsmart18-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sainsmart18-overlay.dts -@@ -33,7 +33,7 @@ - fps = <50>; - height = <160>; - width = <128>; -- reset-gpios = <&gpio 25 0>; -+ reset-gpios = <&gpio 25 1>; - dc-gpios = <&gpio 24 0>; - bgr; - debug = <0>; -@@ -42,6 +42,12 @@ - }; - - __overrides__ { -- rotate = <&ss18>, "rotate:0"; -+ speed = <&ss18>,"spi-max-frequency:0"; -+ rotate = <&ss18>,"rotate:0"; -+ fps = <&ss18>,"fps:0"; -+ bgr = <&ss18>,"bgr?"; -+ debug = <&ss18>,"debug:0"; -+ dc_pin = <&ss18>,"dc-gpios:4"; -+ reset_pin = <&ss18>,"reset-gpios:4"; - }; - }; |