diff options
Diffstat (limited to 'target/linux/ath79/dts/qca9563_zte_mf286.dtsi')
-rw-r--r-- | target/linux/ath79/dts/qca9563_zte_mf286.dtsi | 127 |
1 files changed, 1 insertions, 126 deletions
diff --git a/target/linux/ath79/dts/qca9563_zte_mf286.dtsi b/target/linux/ath79/dts/qca9563_zte_mf286.dtsi index f794195c3f..df9a9d3f69 100644 --- a/target/linux/ath79/dts/qca9563_zte_mf286.dtsi +++ b/target/linux/ath79/dts/qca9563_zte_mf286.dtsi @@ -1,36 +1,13 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT // Copyright (c) 2021 Cezary Jackiewicz // Copyright (c) 2021, 2022 Lech Perczak -#include "qca956x.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> +#include "qca9563_zte_mf28x.dtsi" / { - aliases { - led-boot = &led_debug; - led-failsafe = &led_debug; - led-running = &led_debug; - led-upgrade = &led_debug; - label-mac-device = ð0; - }; - leds { - compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&enable_wlan_led_gpio>; - /* Hidden SMD LED below signal strength LEDs. - * Visible through slits underside of the case, - * and slightly through the case below signal state LEDs - */ - led_debug: led-0 { - function = LED_FUNCTION_DEBUG; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - led-1 { function = LED_FUNCTION_WLAN; color = <LED_COLOR_ID_BLUE>; @@ -40,22 +17,6 @@ }; keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - wifi { label = "wifi"; linux,code = <KEY_RFKILL>; @@ -63,72 +24,6 @@ debounce-interval = <60>; }; }; - - /* This GPIO is used to reset whole board _including_ the modem */ - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; - active-delay = <3000>; - inactive-delay = <1000>; - }; -}; - -&spi { - status = "okay"; - - boot_flash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - }; - }; - - system_flash: flash@1 { - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "sgmii"; - - qca,ar8327-initvals = < - 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ - 0x7c 0x0000007e /* PORT0_STATUS */ - >; - }; -}; - -ð0 { - status = "okay"; - - phy-mode = "sgmii"; - phy-handle = <&phy0>; -}; - -&pcie { - status = "okay"; - - wifi_ath10k: wifi@0,0 { - compatible = "qcom,ath10k"; - reg = <0x0 0 0 0 0>; - }; }; &pinmux { @@ -136,23 +31,3 @@ pinctrl-single,bits = <0x10 0x0 0xff000000>; }; }; - -&wmac { - status = "okay"; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; |