aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts')
-rw-r--r--target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts122
1 files changed, 97 insertions, 25 deletions
diff --git a/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts b/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts
index b4d452dda1..a478f04a74 100644
--- a/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts
+++ b/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts
@@ -7,26 +7,34 @@
/ {
compatible = "openmesh,om5p-ac-v2", "qca,qca9558";
- model = "OpenMesh OM5P-AC V2";
+ model = "OpenMesh OM5P-AC v2";
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "ref";
- clock-frequency = <40000000>;
+ chosen {
+ /delete-property/ bootargs;
+ };
+
+ aliases {
+ serial0 = &uart;
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_blue;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ label-mac-device = &eth0;
};
leds {
compatible = "gpio-leds";
- power {
- label = "blue:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
-
wifi_green {
label = "green:wifi";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_power_blue: power_blue {
+ label = "blue:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
};
wifi_yellow {
@@ -50,6 +58,32 @@
};
};
+ i2c {
+ compatible = "i2c-gpio";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH /* sda */
+ &gpio 18 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,sda-open-drain;
+
+ tmp423a@4e {
+ compatible = "ti,tmp423";
+ reg = <0x4e>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
@@ -69,11 +103,11 @@
&pinmux {
pinmux_pa_dcdc_pins {
- pinctrl-single,bits = <0x0 0xff00 0x0>;
+ pinctrl-single,bits = <0x0 0x0 0xff0000>;
};
pinmux_pa_high_pins {
- pinctrl-single,bits = <0x10 0xff 0x0>;
+ pinctrl-single,bits = <0x10 0x0 0xff>;
};
};
@@ -81,10 +115,6 @@
status = "okay";
};
-&pll {
- clocks = <&extosc>;
-};
-
&spi {
status = "okay";
@@ -93,6 +123,7 @@
reg = <0>;
spi-max-frequency = <25000000>;
+ /* partitions are passed via bootloader */
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
@@ -104,19 +135,29 @@
read-only;
};
- partition@1 {
+ partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
- partition@2 {
- compatible = "denx,uimage";
- label = "firmware";
+ partition@50000 {
+ label = "custom";
+ reg = <0x050000 0x060000>;
+ read-only;
+ };
+
+ partition@b0000 {
+ label = "inactive";
+ reg = <0x0b0000 0x7a0000>;
+ };
+
+ partition@850000 {
+ label = "inactive2";
reg = <0x850000 0x7a0000>;
};
- partition@3 {
- label = "art";
+ art: partition@ff0000 {
+ label = "ART";
reg = <0xff0000 0x010000>;
read-only;
};
@@ -127,18 +168,25 @@
&mdio0 {
status = "okay";
+ phy-mask = <0x10>;
+
phy4: ethernet-phy@4 {
reg = <4>;
- phy-mode = "rgmii-id";
+ eee-broken-100tx;
+ eee-broken-1000t;
};
};
&mdio1 {
status = "okay";
+ phy-mask = <0x2>;
+
phy1: ethernet-phy@1 {
reg = <1>;
- phy-mode = "sgmii";
+ eee-broken-100tx;
+ eee-broken-1000t;
+ at803x-override-sgmii-link-check;
};
};
@@ -147,7 +195,19 @@
pll-data = <0x82000101 0x80000101 0x80001313>;
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii-id";
phy-handle = <&phy4>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ rxd-delay = <2>;
+ rxdv-delay = <2>;
+ txd-delay = <0>;
+ txen-delay = <0>;
+ };
};
&eth1 {
@@ -155,5 +215,17 @@
pll-data = <0x03000101 0x80000101 0x80001313>;
+ mtd-mac-address = <&art 0x6>;
+
+ qca955x-sgmii-fixup;
+
phy-handle = <&phy1>;
};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mac-address-increment = <2>;
+};