1 files changed, 1 insertions, 166 deletions
diff --git a/target/linux/ath79/dts/ar9344_devolo_magic-2-wifi.dts b/target/linux/ath79/dts/ar9344_devolo_magic-2-wifi.dts
index 627265bf70..d2fd8ecadf 100644
--- a/target/linux/ath79/dts/ar9344_devolo_magic-2-wifi.dts
+++ b/target/linux/ath79/dts/ar9344_devolo_magic-2-wifi.dts
@@ -1,173 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "ar9344.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "ar9344_devolo_dlan_wifi.dtsi"
 
 / {
 	model = "Devolo Magic 2 Wifi";
 	compatible = "devolo,magic-2-wifi", "qca,ar9344";
-
-	aliases {
-		led-boot = &led_dlan_red;
-		led-failsafe = &led_dlan_red;
-		led-running = &led_dlan_white;
-		led-upgrade = &led_dlan_red;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wlan {
-			label = "white:wlan";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy1tpt";
-		};
-
-		led_dlan_white: dlan_white {
-			label = "white:dlan";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-
-		led_dlan_red: dlan_red {
-			label = "red:dlan";
-			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "Reset button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		wifi {
-			label = "WIFI button";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
-			debounce-interval = <60>;
-		};
-
-		dlan {
-			label = "DLAN button";
-			linux,code = <BTN_0>;
-			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-	};
-};
-
-&gpio {
-	wlan_power {
-		gpio-hog;
-		line-name = "WLAN power";
-		gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
-};
-
-&spi {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <25000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			uboot: partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "u-boot-env";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			partition@50000 {
-				label = "Config1";
-				reg = <0x50000 0x10000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "Config2";
-				reg = <0x60000 0x10000>;
-				read-only;
-			};
-
-			partition@70000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x70000 0xf80000>;
-			};
-
-			art: partition@ff0000 {
-				label = "art";
-				reg = <0xff0000 0x10000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&ref {
-	clock-frequency = <40000000>;
-};
-
-&eth0 {
-	status = "okay";
-
-	pll-data = <0x02000000 0x00000101 0x00001616>;
-
-	mtd-mac-address = <&art 0x1002>;
-	mtd-mac-address-increment = <2>;
-
-	phy-mode = "rgmii";
-	phy-handle = <&phy0>;
-};
-
-&wmac {
-	status = "okay";
-
-	mtd-cal-data = <&art 0x1000>;
-};
-
-&pcie {
-	status = "okay";
-
-	wifi@0,0 {
-		compatible = "qcom,ath10k";
-		reg = <0 0 0 0 0>;
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		phy-mode = "rgmii";
-
-		qca,ar8327-initvals = <
-			/* PORT0: RGMII, MAC0/6 exchage, tx_delay 01, No rx_delay */
-			0x04 0x06400000
-			0x08 0x00000000 /* PORT5 PAD MODE CTRL */
-			0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
-			0x7c 0x0000007e /* PORT0_STATUS */
-		>;
-	};
 };