diff options
Diffstat (limited to 'target/linux/ath79/base-files/etc')
3 files changed, 86 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 8e3c9177a2..0c9a5fa4e4 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -2,6 +2,7 @@ . /lib/functions/system.sh . /lib/functions/uci-defaults.sh +. /lib/functions/k2t.sh ath79_setup_interfaces() { @@ -60,6 +61,10 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" ;; + "phicomm,k2t") + ucidef_add_switch "switch0" \ + "0@eth0" "3:lan:1" "5:lan:2" "4:wan" + ;; *) ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; @@ -74,9 +79,14 @@ ath79_setup_macs() avm,fritz300e) lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) ;; + phicomm,k2t) + lan_mac=$(k2t_get_mac "lan_mac") + wan_mac=$(k2t_get_mac "wan_mac") + ;; esac [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac } board_config_update diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 2bbe5923bc..d862f611e5 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -1,5 +1,23 @@ #!/bin/sh +. /lib/functions/k2t.sh + +# xor multiple hex values of the same length +xor() { + local val + local ret="0x$1" + local retlen=${#1} + + shift + while [ -n "$1" ]; do + val="0x$1" + ret=$((ret ^ val)) + shift + done + + printf "%0${retlen}x" "$ret" +} + ath10kcal_die() { echo "ath10cal: " "$*" exit 1 @@ -36,6 +54,29 @@ ath10kcal_patch_mac() { macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6 } +ath10kcal_patch_mac_crc() { + local mac=$1 + local mac_offset=6 + local chksum_offset=2 + local xor_mac + local xor_fw_mac + local xor_fw_chksum + + xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE) + xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}" + + ath10kcal_patch_mac "$mac" && { + xor_mac=${mac//:/} + xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}" + + xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE) + xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac) + + printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \ + dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2 + } +} + [ -e /lib/firmware/$FIRMWARE ] && exit 0 . /lib/functions.sh @@ -52,6 +93,17 @@ case "$FIRMWARE" in ;; esac ;; +"ath10k/pre-cal-pci-0000:00:00.0.bin") + case $board in + phicomm,k2t) + ath10kcal_extract "art" 20480 12064 + ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac") + + ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ + /lib/firmware/ath10k/QCA9888/hw2.0/board.bin + ;; + esac + ;; *) exit 1 ;; diff --git a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac new file mode 100644 index 0000000000..59c58f9c67 --- /dev/null +++ b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -0,0 +1,24 @@ +#!/bin/ash + +[ "$ACTION" == "add" ] || exit 0 + +PHYNBR=${DEVPATH##*/phy} + +[ -n $PHYNBR ] || exit 0 + +. /lib/functions.sh +. /lib/functions/system.sh +. /lib/functions/k2t.sh + +board=$(board_name) + +case "$board" in + phicomm,k2t) + # The K2T factory firmware does use LAN mac address as the 2.4G wifi mac address + [ "$PHYNBR" -eq 1 ] && \ + echo $(k2t_get_mac "lan_mac") > /sys${DEVPATH}/macaddress + ;; + *) + ;; +esac + |