aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath25/patches-4.14
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ath25/patches-4.14')
-rw-r--r--target/linux/ath25/patches-4.14/107-ar5312_gpio.patch212
-rw-r--r--target/linux/ath25/patches-4.14/108-ar2315_gpio.patch363
-rw-r--r--target/linux/ath25/patches-4.14/110-ar2313_ethernet.patch1734
-rw-r--r--target/linux/ath25/patches-4.14/120-spiflash.patch634
-rw-r--r--target/linux/ath25/patches-4.14/130-watchdog.patch277
-rw-r--r--target/linux/ath25/patches-4.14/140-redboot_boardconfig.patch60
-rw-r--r--target/linux/ath25/patches-4.14/141-redboot_partition_scan.patch44
-rw-r--r--target/linux/ath25/patches-4.14/142-redboot_various_erase_size_fix.patch72
-rw-r--r--target/linux/ath25/patches-4.14/210-reset_button.patch71
-rw-r--r--target/linux/ath25/patches-4.14/220-enet_micrel_workaround.patch111
-rw-r--r--target/linux/ath25/patches-4.14/330-board_leds.patch116
11 files changed, 3694 insertions, 0 deletions
diff --git a/target/linux/ath25/patches-4.14/107-ar5312_gpio.patch b/target/linux/ath25/patches-4.14/107-ar5312_gpio.patch
new file mode 100644
index 0000000000..9b2bee1d73
--- /dev/null
+++ b/target/linux/ath25/patches-4.14/107-ar5312_gpio.patch
@@ -0,0 +1,212 @@
+--- a/arch/mips/ath25/Kconfig
++++ b/arch/mips/ath25/Kconfig
+@@ -2,6 +2,7 @@
+ config SOC_AR5312
+ bool "Atheros AR5312/AR2312+ SoC support"
+ depends on ATH25
++ select GPIO_AR5312
+ default y
+
+ config SOC_AR2315
+--- a/arch/mips/ath25/ar5312.c
++++ b/arch/mips/ath25/ar5312.c
+@@ -22,6 +22,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/mtd/physmap.h>
+ #include <linux/reboot.h>
++#include <linux/gpio.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -180,6 +181,22 @@ static struct platform_device ar5312_phy
+ .num_resources = 1,
+ };
+
++static struct resource ar5312_gpio_res[] = {
++ {
++ .name = "ar5312-gpio",
++ .flags = IORESOURCE_MEM,
++ .start = AR5312_GPIO_BASE,
++ .end = AR5312_GPIO_BASE + AR5312_GPIO_SIZE - 1,
++ },
++};
++
++static struct platform_device ar5312_gpio = {
++ .name = "ar5312-gpio",
++ .id = -1,
++ .resource = ar5312_gpio_res,
++ .num_resources = ARRAY_SIZE(ar5312_gpio_res),
++};
++
+ static void __init ar5312_flash_init(void)
+ {
+ void __iomem *flashctl_base;
+@@ -247,6 +264,8 @@ void __init ar5312_init_devices(void)
+
+ platform_device_register(&ar5312_physmap_flash);
+
++ platform_device_register(&ar5312_gpio);
++
+ switch (ath25_soc) {
+ case ATH25_SOC_AR5312:
+ if (!ath25_board.radio)
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -105,6 +105,13 @@ config GPIO_AMDPT
+ driver for GPIO functionality on Promontory IOHub
+ Require ACPI ASL code to enumerate as a platform device.
+
++config GPIO_AR5312
++ bool "AR5312 SoC GPIO support"
++ default y if SOC_AR5312
++ depends on SOC_AR5312
++ help
++ Say yes here to enable GPIO support for Atheros AR5312/AR2312+ SoCs.
++
+ config GPIO_ASPEED
+ tristate "Aspeed GPIO support"
+ depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-alte
+ obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o
+ obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
+ obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o
++obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o
+ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
+ obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o
+ obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o
+--- /dev/null
++++ b/drivers/gpio/gpio-ar5312.c
+@@ -0,0 +1,121 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
++ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#define DRIVER_NAME "ar5312-gpio"
++
++#define AR5312_GPIO_DO 0x00 /* output register */
++#define AR5312_GPIO_DI 0x04 /* intput register */
++#define AR5312_GPIO_CR 0x08 /* control register */
++
++#define AR5312_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
++#define AR5312_GPIO_CR_O(x) (0 << (x)) /* mask for output */
++#define AR5312_GPIO_CR_I(x) (1 << (x)) /* mask for input */
++#define AR5312_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
++#define AR5312_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
++
++#define AR5312_GPIO_NUM 8
++
++static void __iomem *ar5312_mem;
++
++static inline u32 ar5312_gpio_reg_read(unsigned reg)
++{
++ return __raw_readl(ar5312_mem + reg);
++}
++
++static inline void ar5312_gpio_reg_write(unsigned reg, u32 val)
++{
++ __raw_writel(val, ar5312_mem + reg);
++}
++
++static inline void ar5312_gpio_reg_mask(unsigned reg, u32 mask, u32 val)
++{
++ ar5312_gpio_reg_write(reg, (ar5312_gpio_reg_read(reg) & ~mask) | val);
++}
++
++static int ar5312_gpio_get_val(struct gpio_chip *chip, unsigned gpio)
++{
++ return (ar5312_gpio_reg_read(AR5312_GPIO_DI) >> gpio) & 1;
++}
++
++static void ar5312_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val)
++{
++ u32 reg = ar5312_gpio_reg_read(AR5312_GPIO_DO);
++
++ reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio);
++ ar5312_gpio_reg_write(AR5312_GPIO_DO, reg);
++}
++
++static int ar5312_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
++{
++ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 0, 1 << gpio);
++ return 0;
++}
++
++static int ar5312_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val)
++{
++ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 1 << gpio, 0);
++ ar5312_gpio_set_val(chip, gpio, val);
++ return 0;
++}
++
++static struct gpio_chip ar5312_gpio_chip = {
++ .label = DRIVER_NAME,
++ .direction_input = ar5312_gpio_dir_in,
++ .direction_output = ar5312_gpio_dir_out,
++ .set = ar5312_gpio_set_val,
++ .get = ar5312_gpio_get_val,
++ .base = 0,
++ .ngpio = AR5312_GPIO_NUM,
++};
++
++static int ar5312_gpio_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct resource *res;
++ int ret;
++
++ if (ar5312_mem)
++ return -EBUSY;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ ar5312_mem = devm_ioremap_resource(dev, res);
++ if (IS_ERR(ar5312_mem))
++ return PTR_ERR(ar5312_mem);
++
++ ar5312_gpio_chip.parent = dev;
++ ret = gpiochip_add(&ar5312_gpio_chip);
++ if (ret) {
++ dev_err(dev, "failed to add gpiochip\n");
++ return ret;
++ }
++
++ return 0;
++}
++
++static struct platform_driver ar5312_gpio_driver = {
++ .probe = ar5312_gpio_probe,
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ }
++};
++
++static int __init ar5312_gpio_init(void)
++{
++ return platform_driver_register(&ar5312_gpio_driver);
++}
++subsys_initcall(ar5312_gpio_init);
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -174,6 +174,7 @@ config ATH25
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
++ select GPIOLIB
+ select IRQ_MIPS_CPU
+ select IRQ_DOMAIN
+ select SYS_HAS_CPU_MIPS32_R1
diff --git a/target/linux/ath25/patches-4.14/108-ar2315_gpio.patch b/target/linux/ath25/patches-4.14/108-ar2315_gpio.patch
new file mode 100644
index 0000000000..749b308b89
--- /dev/null
+++ b/target/linux/ath25/patches-4.14/108-ar2315_gpio.patch
@@ -0,0 +1,363 @@
+--- a/arch/mips/ath25/Kconfig
++++ b/arch/mips/ath25/Kconfig
+@@ -8,6 +8,7 @@ config SOC_AR5312
+ config SOC_AR2315
+ bool "Atheros AR2315+ SoC support"
+ depends on ATH25
++ select GPIO_AR2315
+ default y
+
+ config PCI_AR2315
+--- a/arch/mips/ath25/ar2315.c
++++ b/arch/mips/ath25/ar2315.c
+@@ -21,6 +21,8 @@
+ #include <linux/interrupt.h>
+ #include <linux/platform_device.h>
+ #include <linux/reboot.h>
++#include <linux/delay.h>
++#include <linux/gpio.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -167,11 +169,42 @@ void __init ar2315_arch_init_irq(void)
+ ar2315_misc_irq_domain = domain;
+ }
+
++static struct resource ar2315_gpio_res[] = {
++ {
++ .name = "ar2315-gpio",
++ .flags = IORESOURCE_MEM,
++ .start = AR2315_RST_BASE + AR2315_GPIO,
++ .end = AR2315_RST_BASE + AR2315_GPIO + 0x10 - 1,
++ },
++ {
++ .name = "ar2315-gpio",
++ .flags = IORESOURCE_IRQ,
++ },
++ {
++ .name = "ar2315-gpio-irq-base",
++ .flags = IORESOURCE_IRQ,
++ .start = AR231X_GPIO_IRQ_BASE,
++ .end = AR231X_GPIO_IRQ_BASE,
++ }
++};
++
++static struct platform_device ar2315_gpio = {
++ .id = -1,
++ .name = "ar2315-gpio",
++ .resource = ar2315_gpio_res,
++ .num_resources = ARRAY_SIZE(ar2315_gpio_res)
++};
++
+ void __init ar2315_init_devices(void)
+ {
+ /* Find board configuration */
+ ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE);
+
++ ar2315_gpio_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
++ AR2315_MISC_IRQ_GPIO);
++ ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
++ platform_device_register(&ar2315_gpio);
++
+ ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0);
+ }
+
+@@ -187,8 +220,8 @@ static void ar2315_restart(char *command
+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits
+ * a workaround. Give it some time to attempt a gpio based hardware
+ * reset (atheros reference design workaround) */
+-
+- /* TODO: implement the GPIO reset workaround */
++ gpio_request_one(AR2315_RESET_GPIO, GPIOF_OUT_INIT_LOW, "Reset");
++ mdelay(100);
+
+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
+ * workaround. Attempt to jump to the mips reset location -
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -105,6 +105,13 @@ config GPIO_AMDPT
+ driver for GPIO functionality on Promontory IOHub
+ Require ACPI ASL code to enumerate as a platform device.
+
++config GPIO_AR2315
++ bool "AR2315 SoC GPIO support"
++ default y if SOC_AR2315
++ depends on SOC_AR2315
++ help
++ Say yes here to enable GPIO support for Atheros AR2315+ SoCs.
++
+ config GPIO_AR5312
+ bool "AR5312 SoC GPIO support"
+ default y if SOC_AR5312
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-alte
+ obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o
+ obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
+ obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o
++obj-$(CONFIG_GPIO_AR2315) += gpio-ar2315.o
+ obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o
+ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
+ obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o
+--- /dev/null
++++ b/drivers/gpio/gpio-ar2315.c
+@@ -0,0 +1,233 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006 Felix Fietkau <nbd@nbd.name>
++ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++#include <linux/irq.h>
++
++#define DRIVER_NAME "ar2315-gpio"
++
++#define AR2315_GPIO_DI 0x0000
++#define AR2315_GPIO_DO 0x0008
++#define AR2315_GPIO_DIR 0x0010
++#define AR2315_GPIO_INT 0x0018
++
++#define AR2315_GPIO_DIR_M(x) (1 << (x)) /* mask for i/o */
++#define AR2315_GPIO_DIR_O(x) (1 << (x)) /* output */
++#define AR2315_GPIO_DIR_I(x) (0) /* input */
++
++#define AR2315_GPIO_INT_NUM_M 0x3F /* mask for GPIO num */
++#define AR2315_GPIO_INT_TRIG(x) ((x) << 6) /* interrupt trigger */
++#define AR2315_GPIO_INT_TRIG_M (0x3 << 6) /* mask for int trig */
++
++#define AR2315_GPIO_INT_TRIG_OFF 0 /* Triggerring off */
++#define AR2315_GPIO_INT_TRIG_LOW 1 /* Low Level Triggered */
++#define AR2315_GPIO_INT_TRIG_HIGH 2 /* High Level Triggered */
++#define AR2315_GPIO_INT_TRIG_EDGE 3 /* Edge Triggered */
++
++#define AR2315_GPIO_NUM 22
++
++static u32 ar2315_gpio_intmask;
++static u32 ar2315_gpio_intval;
++static unsigned ar2315_gpio_irq_base;
++static void __iomem *ar2315_mem;
++
++static inline u32 ar2315_gpio_reg_read(unsigned reg)
++{
++ return __raw_readl(ar2315_mem + reg);
++}
++
++static inline void ar2315_gpio_reg_write(unsigned reg, u32 val)
++{
++ __raw_writel(val, ar2315_mem + reg);
++}
++
++static inline void ar2315_gpio_reg_mask(unsigned reg, u32 mask, u32 val)
++{
++ ar2315_gpio_reg_write(reg, (ar2315_gpio_reg_read(reg) & ~mask) | val);
++}
++
++static void ar2315_gpio_irq_handler(struct irq_desc *desc)
++{
++ u32 pend;
++ int bit = -1;
++
++ /* only do one gpio interrupt at a time */
++ pend = ar2315_gpio_reg_read(AR2315_GPIO_DI);
++ pend ^= ar2315_gpio_intval;
++ pend &= ar2315_gpio_intmask;
++
++ if (pend) {
++ bit = fls(pend) - 1;
++ pend &= ~(1 << bit);
++ ar2315_gpio_intval ^= (1 << bit);
++ }
++
++ /* Enable interrupt with edge detection */
++ if ((ar2315_gpio_reg_read(AR2315_GPIO_DIR) & AR2315_GPIO_DIR_M(bit)) !=
++ AR2315_GPIO_DIR_I(bit))
++ return;
++
++ if (bit >= 0)
++ generic_handle_irq(ar2315_gpio_irq_base + bit);
++}
++
++static void ar2315_gpio_int_setup(unsigned gpio, int trig)
++{
++ u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_INT);
++
++ reg &= ~(AR2315_GPIO_INT_NUM_M | AR2315_GPIO_INT_TRIG_M);
++ reg |= gpio | AR2315_GPIO_INT_TRIG(trig);
++ ar2315_gpio_reg_write(AR2315_GPIO_INT, reg);
++}
++
++static void ar2315_gpio_irq_unmask(struct irq_data *d)
++{
++ unsigned gpio = d->irq - ar2315_gpio_irq_base;
++ u32 dir = ar2315_gpio_reg_read(AR2315_GPIO_DIR);
++
++ /* Enable interrupt with edge detection */
++ if ((dir & AR2315_GPIO_DIR_M(gpio)) != AR2315_GPIO_DIR_I(gpio))
++ return;
++
++ ar2315_gpio_intmask |= (1 << gpio);
++ ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_EDGE);
++}
++
++static void ar2315_gpio_irq_mask(struct irq_data *d)
++{
++ unsigned gpio = d->irq - ar2315_gpio_irq_base;
++
++ /* Disable interrupt */
++ ar2315_gpio_intmask &= ~(1 << gpio);
++ ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_OFF);
++}
++
++static struct irq_chip ar2315_gpio_irq_chip = {
++ .name = DRIVER_NAME,
++ .irq_unmask = ar2315_gpio_irq_unmask,
++ .irq_mask = ar2315_gpio_irq_mask,
++};
++
++static void ar2315_gpio_irq_init(unsigned irq)
++{
++ unsigned i;
++
++ ar2315_gpio_intval = ar2315_gpio_reg_read(AR2315_GPIO_DI);
++ for (i = 0; i < AR2315_GPIO_NUM; i++) {
++ unsigned _irq = ar2315_gpio_irq_base + i;
++
++ irq_set_chip_and_handler(_irq, &ar2315_gpio_irq_chip,
++ handle_level_irq);
++ }
++ irq_set_chained_handler(irq, ar2315_gpio_irq_handler);
++}
++
++static int ar2315_gpio_get_val(struct gpio_chip *chip, unsigned gpio)
++{
++ return (ar2315_gpio_reg_read(AR2315_GPIO_DI) >> gpio) & 1;
++}
++
++static void ar2315_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val)
++{
++ u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_DO);
++
++ reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio);
++ ar2315_gpio_reg_write(AR2315_GPIO_DO, reg);
++}
++
++static int ar2315_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
++{
++ ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 1 << gpio, 0);
++ return 0;
++}
++
++static int ar2315_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val)
++{
++ ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 0, 1 << gpio);
++ ar2315_gpio_set_val(chip, gpio, val);
++ return 0;
++}
++
++static int ar2315_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ return ar2315_gpio_irq_base + gpio;
++}
++
++static struct gpio_chip ar2315_gpio_chip = {
++ .label = DRIVER_NAME,
++ .direction_input = ar2315_gpio_dir_in,
++ .direction_output = ar2315_gpio_dir_out,
++ .set = ar2315_gpio_set_val,
++ .get = ar2315_gpio_get_val,
++ .to_irq = ar2315_gpio_to_irq,
++ .base = 0,
++ .ngpio = AR2315_GPIO_NUM,
++};
++
++static int ar2315_gpio_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct resource *res;
++ unsigned irq;
++ int ret;
++
++ if (ar2315_mem)
++ return -EBUSY;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
++ "ar2315-gpio-irq-base");
++ if (!res) {
++ dev_err(dev, "not found GPIO IRQ base\n");
++ return -ENXIO;
++ }
++ ar2315_gpio_irq_base = res->start;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, DRIVER_NAME);
++ if (!res) {
++ dev_err(dev, "not found IRQ number\n");
++ return -ENXIO;
++ }
++ irq = res->start;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, DRIVER_NAME);
++ ar2315_mem = devm_ioremap_resource(dev, res);
++ if (IS_ERR(ar2315_mem))
++ return PTR_ERR(ar2315_mem);
++
++ ar2315_gpio_chip.parent = dev;
++ ret = gpiochip_add(&ar2315_gpio_chip);
++ if (ret) {
++ dev_err(dev, "failed to add gpiochip\n");
++ return ret;
++ }
++
++ ar2315_gpio_irq_init(irq);
++
++ return 0;
++}
++
++static struct platform_driver ar2315_gpio_driver = {
++ .probe = ar2315_gpio_probe,
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ }
++};
++
++static int __init ar2315_gpio_init(void)
++{
++ return platform_driver_register(&ar2315_gpio_driver);
++}
++subsys_initcall(ar2315_gpio_init);
+--- a/arch/mips/ath25/devices.h
++++ b/arch/mips/ath25/devices.h
+@@ -4,6 +4,11 @@
+
+ #include <linux/cpu.h>
+
++#define AR231X_GPIO_IRQ_BASE 0x30
++
++/* GPIO number for AR2315/16 reset issue workaround */
++#define AR2315_RESET_GPIO 5
++
+ #define ATH25_REG_MS(_val, _field) (((_val) & _field##_M) >> _field##_S)
+
+ #define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */
+--- a/arch/mips/ath25/ar2315_regs.h
++++ b/arch/mips/ath25/ar2315_regs.h
+@@ -315,6 +315,9 @@
+ #define AR2315_MEM_CFG_BANKADDR_BITS_M 0x00000018
+ #define AR2315_MEM_CFG_BANKADDR_BITS_S 3
+
++/* GPIO MMR base address */
++#define AR2315_GPIO 0x0088
++
+ /*
+ * Local Bus Interface Registers
+ */
diff --git a/target/linux/ath25/patches-4.14/110-ar2313_ethernet.patch b/target/linux/ath25/patches-4.14/110-ar2313_ethernet.patch
new file mode 100644
index 0000000000..a2b1492250
--- /dev/null
+++ b/target/linux/ath25/patches-4.14/110-ar2313_ethernet.patch
@@ -0,0 +1,1734 @@
+--- a/drivers/net/ethernet/atheros/Makefile
++++ b/drivers/net/ethernet/atheros/Makefile
+@@ -8,3 +8,4 @@ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/
+ obj-$(CONFIG_ATL1C) += atl1c/
+ obj-$(CONFIG_ALX) += alx/
++obj-$(CONFIG_NET_AR231X) += ar231x/
+--- a/drivers/net/ethernet/atheros/Kconfig
++++ b/drivers/net/ethernet/atheros/Kconfig
+@@ -5,7 +5,7 @@
+ config NET_VENDOR_ATHEROS
+ bool "Atheros devices"
+ default y
+- depends on PCI
++ depends on (PCI || ATH25)
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y.
+
+@@ -78,4 +78,10 @@ config ALX
+ To compile this driver as a module, choose M here. The module
+ will be called alx.
+
++config NET_AR231X
++ tristate "Atheros AR231X built-in Ethernet support"
++ depends on ATH25
++ help
++ Support for the AR231x/531x ethernet controller
++
+ endif # NET_VENDOR_ATHEROS
+--- /dev/null
++++ b/drivers/net/ethernet/atheros/ar231x/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_NET_AR231X) += ar231x.o
+--- /dev/null
++++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c
+@@ -0,0 +1,1119 @@
++/*
++ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
++ *
++ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Additional credits:
++ * This code is taken from John Taylor's Sibyte driver and then
++ * modified for the AR2313.
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/ioport.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/interrupt.h>
++#include <linux/skbuff.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <linux/mii.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++
++#define AR2313_MTU 1692
++#define AR2313_PRIOS 1
++#define AR2313_QUEUES (2*AR2313_PRIOS)
++#define AR2313_DESCR_ENTRIES 64
++
++#ifndef min
++#define min(a, b) (((a) < (b)) ? (a) : (b))
++#endif
++
++#ifndef SMP_CACHE_BYTES
++#define SMP_CACHE_BYTES L1_CACHE_BYTES
++#endif
++
++#define AR2313_MBOX_SET_BIT 0x8
++
++#include "ar231x.h"
++
++/**
++ * New interrupt handler strategy:
++ *
++ * An old interrupt handler worked using the traditional method of
++ * replacing an skbuff with a new one when a packet arrives. However
++ * the rx rings do not need to contain a static number of buffer
++ * descriptors, thus it makes sense to move the memory allocation out
++ * of the main interrupt handler and do it in a bottom half handler
++ * and only allocate new buffers when the number of buffers in the
++ * ring is below a certain threshold. In order to avoid starving the
++ * NIC under heavy load it is however necessary to force allocation
++ * when hitting a minimum threshold. The strategy for alloction is as
++ * follows:
++ *
++ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
++ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
++ * the buffers in the interrupt handler
++ * RX_RING_THRES - maximum number of buffers in the rx ring
++ *
++ * One advantagous side effect of this allocation approach is that the
++ * entire rx processing can be done without holding any spin lock
++ * since the rx rings and registers are totally independent of the tx
++ * ring and its registers. This of course includes the kmalloc's of
++ * new skb's. Thus start_xmit can run in parallel with rx processing
++ * and the memory allocation on SMP systems.
++ *
++ * Note that running the skb reallocation in a bottom half opens up
++ * another can of races which needs to be handled properly. In
++ * particular it can happen that the interrupt handler tries to run
++ * the reallocation while the bottom half is either running on another
++ * CPU or was interrupted on the same CPU. To get around this the
++ * driver uses bitops to prevent the reallocation routines from being
++ * reentered.
++ *
++ * TX handling can also be done without holding any spin lock, wheee
++ * this is fun! since tx_csm is only written to by the interrupt
++ * handler.
++ */
++
++/**
++ * Threshold values for RX buffer allocation - the low water marks for
++ * when to start refilling the rings are set to 75% of the ring
++ * sizes. It seems to make sense to refill the rings entirely from the
++ * intrrupt handler once it gets below the panic threshold, that way
++ * we don't risk that the refilling is moved to another CPU when the
++ * one running the interrupt handler just got the slab code hot in its
++ * cache.
++ */
++#define RX_RING_SIZE AR2313_DESCR_ENTRIES
++#define RX_PANIC_THRES (RX_RING_SIZE/4)
++#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
++#define CRC_LEN 4
++#define RX_OFFSET 2
++
++#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
++#define VLAN_HDR 4
++#else
++#define VLAN_HDR 0
++#endif
++
++#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + \
++ RX_OFFSET)
++
++#ifdef MODULE
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@nbd.name>");
++MODULE_DESCRIPTION("AR231x Ethernet driver");
++#endif
++
++#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
++
++/* prototypes */
++static void ar231x_halt(struct net_device *dev);
++static void rx_tasklet_func(unsigned long data);
++static void rx_tasklet_cleanup(struct net_device *dev);
++static void ar231x_multicast_list(struct net_device *dev);
++static void ar231x_tx_timeout(struct net_device *dev);
++
++static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
++static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
++ u16 value);
++static int ar231x_mdiobus_reset(struct mii_bus *bus);
++static int ar231x_mdiobus_probe(struct net_device *dev);
++static void ar231x_adjust_link(struct net_device *dev);
++
++#ifndef ERR
++#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
++#endif
++
++#ifdef CONFIG_NET_POLL_CONTROLLER
++static void
++ar231x_netpoll(struct net_device *dev)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++ ar231x_interrupt(dev->irq, dev);
++ local_irq_restore(flags);
++}
++#endif
++
++static const struct net_device_ops ar231x_ops = {
++ .ndo_open = ar231x_open,
++ .ndo_stop = ar231x_close,
++ .ndo_start_xmit = ar231x_start_xmit,
++ .ndo_set_rx_mode = ar231x_multicast_list,
++ .ndo_do_ioctl = ar231x_ioctl,
++ .ndo_change_mtu = eth_change_mtu,
++ .ndo_validate_addr = eth_validate_addr,
++ .ndo_set_mac_address = eth_mac_addr,
++ .ndo_tx_timeout = ar231x_tx_timeout,
++#ifdef CONFIG_NET_POLL_CONTROLLER
++ .ndo_poll_controller = ar231x_netpoll,
++#endif
++};
++
++static int ar231x_probe(struct platform_device *pdev)
++{
++ struct net_device *dev;
++ struct ar231x_private *sp;
++ struct resource *res;
++ unsigned long ar_eth_base;
++ char buf[64];
++
++ dev = alloc_etherdev(sizeof(struct ar231x_private));
++
++ if (dev == NULL) {
++ printk(KERN_ERR
++ "ar231x: Unable to allocate net_device structure!\n");
++ return -ENOMEM;
++ }
++
++ platform_set_drvdata(pdev, dev);
++
++ SET_NETDEV_DEV(dev, &pdev->dev);
++
++ sp = netdev_priv(dev);
++ sp->dev = dev;
++ sp->cfg = pdev->dev.platform_data;
++
++ sprintf(buf, "eth%d_membase", pdev->id);
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
++ if (!res)
++ return -ENODEV;
++
++ sp->link = 0;
++ ar_eth_base = res->start;
++
++ sprintf(buf, "eth%d_irq", pdev->id);
++ dev->irq = platform_get_irq_byname(pdev, buf);
++
++ spin_lock_init(&sp->lock);
++
++ dev->features |= NETIF_F_HIGHDMA;
++ dev->netdev_ops = &ar231x_ops;
++
++ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long)dev);
++ tasklet_disable(&sp->rx_tasklet);
++
++ sp->eth_regs = ioremap_nocache(ar_eth_base, sizeof(*sp->eth_regs));
++ if (!sp->eth_regs) {
++ printk("Can't remap eth registers\n");
++ return -ENXIO;
++ }
++
++ /**
++ * When there's only one MAC, PHY regs are typically on ENET0,
++ * even though the MAC might be on ENET1.
++ * So remap PHY regs separately.
++ */
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eth0_mii");
++ if (!res) {
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
++ "eth1_mii");
++ if (!res)
++ return -ENODEV;
++ }
++ sp->phy_regs = ioremap_nocache(res->start, resource_size(res));
++ if (!sp->phy_regs) {
++ printk("Can't remap phy registers\n");
++ return -ENXIO;
++ }
++
++ sp->dma_regs = ioremap_nocache(ar_eth_base + 0x1000,
++ sizeof(*sp->dma_regs));
++ if (!sp->dma_regs) {
++ printk("Can't remap DMA registers\n");
++ return -ENXIO;
++ }
++ dev->base_addr = ar_eth_base + 0x1000;
++
++ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
++ sp->name[sizeof(sp->name) - 1] = '\0';
++ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
++
++ if (ar231x_init(dev)) {
++ /* ar231x_init() calls ar231x_init_cleanup() on error */
++ kfree(dev);
++ return -ENODEV;
++ }
++
++ if (register_netdev(dev)) {
++ printk("%s: register_netdev failed\n", __func__);
++ return -1;
++ }
++
++ printk("%s: %s: %pM, irq %d\n", dev->name, sp->name, dev->dev_addr,
++ dev->irq);
++
++ sp->mii_bus = mdiobus_alloc();
++ if (sp->mii_bus == NULL)
++ return -1;
++
++ sp->mii_bus->priv = dev;
++ sp->mii_bus->read = ar231x_mdiobus_read;
++ sp->mii_bus->write = ar231x_mdiobus_write;
++ sp->mii_bus->reset = ar231x_mdiobus_reset;
++ sp->mii_bus->name = "ar231x_eth_mii";
++ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
++
++ mdiobus_register(sp->mii_bus);
++
++ if (ar231x_mdiobus_probe(dev) != 0) {
++ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
++ rx_tasklet_cleanup(dev);
++ ar231x_init_cleanup(dev);
++ unregister_netdev(dev);
++ kfree(dev);
++ return -ENODEV;
++ }
++
++ return 0;
++}
++
++static void ar231x_multicast_list(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int filter;
++
++ filter = sp->eth_regs->mac_control;
++
++ if (dev->flags & IFF_PROMISC)
++ filter |= MAC_CONTROL_PR;
++ else
++ filter &= ~MAC_CONTROL_PR;
++ if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 0))
++ filter |= MAC_CONTROL_PM;
++ else
++ filter &= ~MAC_CONTROL_PM;
++
++ sp->eth_regs->mac_control = filter;
++}
++
++static void rx_tasklet_cleanup(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ /**
++ * Tasklet may be scheduled. Need to get it removed from the list
++ * since we're about to free the struct.
++ */
++
++ sp->unloading = 1;
++ tasklet_enable(&sp->rx_tasklet);
++ tasklet_kill(&sp->rx_tasklet);
++}
++
++static int ar231x_remove(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ rx_tasklet_cleanup(dev);
++ ar231x_init_cleanup(dev);
++ unregister_netdev(dev);
++ mdiobus_unregister(sp->mii_bus);
++ mdiobus_free(sp->mii_bus);
++ kfree(dev);
++ return 0;
++}
++
++/**
++ * Restart the AR2313 ethernet controller.
++ */
++static int ar231x_restart(struct net_device *dev)
++{
++ /* disable interrupts */
++ disable_irq(dev->irq);
++
++ /* stop mac */
++ ar231x_halt(dev);
++
++ /* initialize */
++ ar231x_init(dev);
++
++ /* enable interrupts */
++ enable_irq(dev->irq);
++
++ return 0;
++}
++
++static struct platform_driver ar231x_driver = {
++ .driver.name = "ar231x-eth",
++ .probe = ar231x_probe,
++ .remove = ar231x_remove,
++};
++
++module_platform_driver(ar231x_driver);
++
++static void ar231x_free_descriptors(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ if (sp->rx_ring != NULL) {
++ kfree((void *)KSEG0ADDR(sp->rx_ring));
++ sp->rx_ring = NULL;
++ sp->tx_ring = NULL;
++ }
++}
++
++static int ar231x_allocate_descriptors(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ int size;
++ int j;
++ ar231x_descr_t *space;
++
++ if (sp->rx_ring != NULL) {
++ printk("%s: already done.\n", __func__);
++ return 0;
++ }
++
++ size = sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES);
++ space = kmalloc(size, GFP_KERNEL);
++ if (space == NULL)
++ return 1;
++
++ /* invalidate caches */
++ dma_cache_inv((unsigned int)space, size);
++
++ /* now convert pointer to KSEG1 */
++ space = (ar231x_descr_t *)KSEG1ADDR(space);
++
++ memset((void *)space, 0, size);
++
++ sp->rx_ring = space;
++ space += AR2313_DESCR_ENTRIES;
++
++ sp->tx_ring = space;
++ space += AR2313_DESCR_ENTRIES;
++
++ /* Initialize the transmit Descriptors */
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ ar231x_descr_t *td = &sp->tx_ring[j];
++
++ td->status = 0;
++ td->devcs = DMA_TX1_CHAINED;
++ td->addr = 0;
++ td->descr = virt_to_phys(&sp->tx_ring[DSC_NEXT(j)]);
++ }
++
++ return 0;
++}
++
++/**
++ * Generic cleanup handling data allocated during init. Used when the
++ * module is unloaded or if an error occurs during initialization
++ */
++static void ar231x_init_cleanup(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ struct sk_buff *skb;
++ int j;
++
++ ar231x_free_descriptors(dev);
++
++ if (sp->eth_regs)
++ iounmap((void *)sp->eth_regs);
++ if (sp->dma_regs)
++ iounmap((void *)sp->dma_regs);
++ if (sp->phy_regs)
++ iounmap((void *)sp->phy_regs);
++
++ if (sp->rx_skb) {
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ skb = sp->rx_skb[j];
++ if (skb) {
++ sp->rx_skb[j] = NULL;
++ dev_kfree_skb(skb);
++ }
++ }
++ kfree(sp->rx_skb);
++ sp->rx_skb = NULL;
++ }
++
++ if (sp->tx_skb) {
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ skb = sp->tx_skb[j];
++ if (skb) {
++ sp->tx_skb[j] = NULL;
++ dev_kfree_skb(skb);
++ }
++ }
++ kfree(sp->tx_skb);
++ sp->tx_skb = NULL;
++ }
++}
++
++static int ar231x_reset_reg(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int ethsal, ethsah;
++ unsigned int flags;
++
++ sp->cfg->reset_set(sp->cfg->reset_mac);
++ mdelay(10);
++ sp->cfg->reset_clear(sp->cfg->reset_mac);
++ mdelay(10);
++ sp->cfg->reset_set(sp->cfg->reset_phy);
++ mdelay(10);
++ sp->cfg->reset_clear(sp->cfg->reset_phy);
++ mdelay(10);
++
++ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
++ mdelay(10);
++ sp->dma_regs->bus_mode =
++ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
++
++ /* enable interrupts */
++ sp->dma_regs->intr_ena = DMA_STATUS_AIS | DMA_STATUS_NIS |
++ DMA_STATUS_RI | DMA_STATUS_TI |
++ DMA_STATUS_FBE;
++ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
++ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
++ sp->dma_regs->control =
++ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
++
++ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
++ sp->eth_regs->vlan_tag = (0x8100);
++
++ /* Enable Ethernet Interface */
++ flags = (MAC_CONTROL_TE | /* transmit enable */
++ MAC_CONTROL_PM | /* pass mcast */
++ MAC_CONTROL_F | /* full duplex */
++ MAC_CONTROL_HBD); /* heart beat disabled */
++
++ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
++ flags |= MAC_CONTROL_PR;
++ }
++ sp->eth_regs->mac_control = flags;
++
++ /* Set all Ethernet station address registers to their initial values */
++ ethsah = (((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF);
++
++ ethsal = (((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
++ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
++ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF);
++
++ sp->eth_regs->mac_addr[0] = ethsah;
++ sp->eth_regs->mac_addr[1] = ethsal;
++
++ mdelay(10);
++
++ return 0;
++}
++
++static int ar231x_init(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ int ecode = 0;
++
++ /* Allocate descriptors */
++ if (ar231x_allocate_descriptors(dev)) {
++ printk("%s: %s: ar231x_allocate_descriptors failed\n",
++ dev->name, __func__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++
++ /* Get the memory for the skb rings */
++ if (sp->rx_skb == NULL) {
++ sp->rx_skb =
++ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
++ GFP_KERNEL);
++ if (!(sp->rx_skb)) {
++ printk("%s: %s: rx_skb kmalloc failed\n",
++ dev->name, __func__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++ }
++ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++ if (sp->tx_skb == NULL) {
++ sp->tx_skb =
++ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
++ GFP_KERNEL);
++ if (!(sp->tx_skb)) {
++ printk("%s: %s: tx_skb kmalloc failed\n",
++ dev->name, __func__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++ }
++ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++ /**
++ * Set tx_csm before we start receiving interrupts, otherwise
++ * the interrupt handler might think it is supposed to process
++ * tx ints before we are up and running, which may cause a null
++ * pointer access in the int handler.
++ */
++ sp->rx_skbprd = 0;
++ sp->cur_rx = 0;
++ sp->tx_prd = 0;
++ sp->tx_csm = 0;
++
++ /* Zero the stats before starting the interface */
++ memset(&dev->stats, 0, sizeof(dev->stats));
++
++ /**
++ * We load the ring here as there seem to be no way to tell the
++ * firmware to wipe the ring without re-initializing it.
++ */
++ ar231x_load_rx_ring(dev, RX_RING_SIZE);
++
++ /* Init hardware */
++ ar231x_reset_reg(dev);
++
++ /* Get the IRQ */
++ ecode = request_irq(dev->irq, &ar231x_interrupt, 0,
++ dev->name, dev);
++ if (ecode) {
++ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
++ dev->name, __func__, dev->irq);
++ goto init_error;
++ }
++
++ tasklet_enable(&sp->rx_tasklet);
++
++ return 0;
++
++init_error:
++ ar231x_init_cleanup(dev);
++ return ecode;
++}
++
++/**
++ * Load the rx ring.
++ *
++ * Loading rings is safe without holding the spin lock since this is
++ * done only before the device is enabled, thus no interrupts are
++ * generated and by the interrupt handler/tasklet handler.
++ */
++static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ short i, idx;
++
++ idx = sp->rx_skbprd;
++
++ for (i = 0; i < nr_bufs; i++) {
++ struct sk_buff *skb;
++ ar231x_descr_t *rd;
++
++ if (sp->rx_skb[idx])
++ break;
++
++ skb = netdev_alloc_skb_ip_align(dev, AR2313_BUFSIZE);
++ if (!skb) {
++ printk("\n\n\n\n %s: No memory in system\n\n\n\n",
++ __func__);
++ break;
++ }
++
++ /* Make sure IP header starts on a fresh cache line */
++ skb->dev = dev;
++ sp->rx_skb[idx] = skb;
++
++ rd = (ar231x_descr_t *)&sp->rx_ring[idx];
++
++ /* initialize dma descriptor */
++ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++ DMA_RX1_CHAINED);
++ rd->addr = virt_to_phys(skb->data);
++ rd->descr = virt_to_phys(&sp->rx_ring[DSC_NEXT(idx)]);
++ rd->status = DMA_RX_OWN;
++
++ idx = DSC_NEXT(idx);
++ }
++
++ if (i)
++ sp->rx_skbprd = idx;
++}
++
++#define AR2313_MAX_PKTS_PER_CALL 64
++
++static int ar231x_rx_int(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ struct sk_buff *skb, *skb_new;
++ ar231x_descr_t *rxdesc;
++ unsigned int status;
++ u32 idx;
++ int pkts = 0;
++ int rval;
++
++ idx = sp->cur_rx;
++
++ /* process at most the entire ring and then wait for another int */
++ while (1) {
++ rxdesc = &sp->rx_ring[idx];
++ status = rxdesc->status;
++
++ if (status & DMA_RX_OWN) {
++ /* SiByte owns descriptor or descr not yet filled in */
++ rval = 0;
++ break;
++ }
++
++ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
++ rval = 1;
++ break;
++ }
++
++ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
++ dev->stats.rx_errors++;
++ dev->stats.rx_dropped++;
++
++ /* add statistics counters */
++ if (status & DMA_RX_ERR_CRC)
++ dev->stats.rx_crc_errors++;
++ if (status & DMA_RX_ERR_COL)
++ dev->stats.rx_over_errors++;
++ if (status & DMA_RX_ERR_LENGTH)
++ dev->stats.rx_length_errors++;
++ if (status & DMA_RX_ERR_RUNT)
++ dev->stats.rx_over_errors++;
++ if (status & DMA_RX_ERR_DESC)
++ dev->stats.rx_over_errors++;
++
++ } else {
++ /* alloc new buffer. */
++ skb_new = netdev_alloc_skb_ip_align(dev,
++ AR2313_BUFSIZE);
++ if (skb_new != NULL) {
++ skb = sp->rx_skb[idx];
++ /* set skb */
++ skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) &
++ 0x3fff) - CRC_LEN);
++
++ dev->stats.rx_bytes += skb->len;
++ skb->protocol = eth_type_trans(skb, dev);
++ /* pass the packet to upper layers */
++ netif_rx(skb);
++
++ skb_new->dev = dev;
++ /* reset descriptor's curr_addr */
++ rxdesc->addr = virt_to_phys(skb_new->data);
++
++ dev->stats.rx_packets++;
++ sp->rx_skb[idx] = skb_new;
++ } else {
++ dev->stats.rx_dropped++;
++ }
++ }
++
++ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++ DMA_RX1_CHAINED);
++ rxdesc->status = DMA_RX_OWN;
++
++ idx = DSC_NEXT(idx);
++ }
++
++ sp->cur_rx = idx;
++
++ return rval;
++}
++
++static void ar231x_tx_int(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ u32 idx;
++ struct sk_buff *skb;
++ ar231x_descr_t *txdesc;
++ unsigned int status = 0;
++
++ idx = sp->tx_csm;
++
++ while (idx != sp->tx_prd) {
++ txdesc = &sp->tx_ring[idx];
++ status = txdesc->status;
++
++ if (status & DMA_TX_OWN) {
++ /* ar231x dma still owns descr */
++ break;
++ }
++ /* done with this descriptor */
++ dma_unmap_single(NULL, txdesc->addr,
++ txdesc->devcs & DMA_TX1_BSIZE_MASK,
++ DMA_TO_DEVICE);
++ txdesc->status = 0;
++
++ if (status & DMA_TX_ERROR) {
++ dev->stats.tx_errors++;
++ dev->stats.tx_dropped++;
++ if (status & DMA_TX_ERR_UNDER)
++ dev->stats.tx_fifo_errors++;
++ if (status & DMA_TX_ERR_HB)
++ dev->stats.tx_heartbeat_errors++;
++ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
++ dev->stats.tx_carrier_errors++;
++ if (status & (DMA_TX_ERR_LATE | DMA_TX_ERR_COL |
++ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
++ dev->stats.tx_aborted_errors++;
++ } else {
++ /* transmit OK */
++ dev->stats.tx_packets++;
++ }
++
++ skb = sp->tx_skb[idx];
++ sp->tx_skb[idx] = NULL;
++ idx = DSC_NEXT(idx);
++ dev->stats.tx_bytes += skb->len;
++ dev_kfree_skb_irq(skb);
++ }
++
++ sp->tx_csm = idx;
++}
++
++static void rx_tasklet_func(unsigned long data)
++{
++ struct net_device *dev = (struct net_device *)data;
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ if (sp->unloading)
++ return;
++
++ if (ar231x_rx_int(dev)) {
++ tasklet_hi_schedule(&sp->rx_tasklet);
++ } else {
++ unsigned long flags;
++
++ spin_lock_irqsave(&sp->lock, flags);
++ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
++ spin_unlock_irqrestore(&sp->lock, flags);
++ }
++}
++
++static void rx_schedule(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
++
++ tasklet_hi_schedule(&sp->rx_tasklet);
++}
++
++static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
++{
++ struct net_device *dev = (struct net_device *)dev_id;
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int status, enabled;
++
++ /* clear interrupt */
++ /* Don't clear RI bit if currently disabled */
++ status = sp->dma_regs->status;
++ enabled = sp->dma_regs->intr_ena;
++ sp->dma_regs->status = status & enabled;
++
++ if (status & DMA_STATUS_NIS) {
++ /* normal status */
++ /**
++ * Don't schedule rx processing if interrupt
++ * is already disabled.
++ */
++ if (status & enabled & DMA_STATUS_RI) {
++ /* receive interrupt */
++ rx_schedule(dev);
++ }
++ if (status & DMA_STATUS_TI) {
++ /* transmit interrupt */
++ ar231x_tx_int(dev);
++ }
++ }
++
++ /* abnormal status */
++ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS))
++ ar231x_restart(dev);
++
++ return IRQ_HANDLED;
++}
++
++static int ar231x_open(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int ethsal, ethsah;
++
++ /* reset the hardware, in case the MAC address changed */
++ ethsah = (((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF);
++
++ ethsal = (((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
++ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
++ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF);
++
++ sp->eth_regs->mac_addr[0] = ethsah;
++ sp->eth_regs->mac_addr[1] = ethsal;
++
++ mdelay(10);
++
++ dev->mtu = 1500;
++ netif_start_queue(dev);
++
++ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
++
++ phy_start(sp->phy_dev);
++
++ return 0;
++}
++
++static void ar231x_tx_timeout(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned long flags;
++
++ spin_lock_irqsave(&sp->lock, flags);
++ ar231x_restart(dev);
++ spin_unlock_irqrestore(&sp->lock, flags);
++}
++
++static void ar231x_halt(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ int j;
++
++ tasklet_disable(&sp->rx_tasklet);
++
++ /* kill the MAC */
++ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
++ MAC_CONTROL_TE); /* disable Transmits */
++ /* stop dma */
++ sp->dma_regs->control = 0;
++ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
++
++ /* place phy and MAC in reset */
++ sp->cfg->reset_set(sp->cfg->reset_mac);
++ sp->cfg->reset_set(sp->cfg->reset_phy);
++
++ /* free buffers on tx ring */
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ struct sk_buff *skb;
++ ar231x_descr_t *txdesc;
++
++ txdesc = &sp->tx_ring[j];
++ txdesc->descr = 0;
++
++ skb = sp->tx_skb[j];
++ if (skb) {
++ dev_kfree_skb(skb);
++ sp->tx_skb[j] = NULL;
++ }
++ }
++}
++
++/**
++ * close should do nothing. Here's why. It's called when
++ * 'ifconfig bond0 down' is run. If it calls free_irq then
++ * the irq is gone forever ! When bond0 is made 'up' again,
++ * the ar231x_open () does not call request_irq (). Worse,
++ * the call to ar231x_halt() generates a WDOG reset due to
++ * the write to reset register and the box reboots.
++ * Commenting this out is good since it allows the
++ * system to resume when bond0 is made up again.
++ */
++static int ar231x_close(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++#if 0
++ /* Disable interrupts */
++ disable_irq(dev->irq);
++
++ /**
++ * Without (or before) releasing irq and stopping hardware, this
++ * is an absolute non-sense, by the way. It will be reset instantly
++ * by the first irq.
++ */
++ netif_stop_queue(dev);
++
++ /* stop the MAC and DMA engines */
++ ar231x_halt(dev);
++
++ /* release the interrupt */
++ free_irq(dev->irq, dev);
++
++#endif
++
++ phy_stop(sp->phy_dev);
++
++ return 0;
++}
++
++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ ar231x_descr_t *td;
++ u32 idx;
++
++ idx = sp->tx_prd;
++ td = &sp->tx_ring[idx];
++
++ if (td->status & DMA_TX_OWN) {
++ /* free skbuf and lie to the caller that we sent it out */
++ dev->stats.tx_dropped++;
++ dev_kfree_skb(skb);
++
++ /* restart transmitter in case locked */
++ sp->dma_regs->xmt_poll = 0;
++ return 0;
++ }
++
++ /* Setup the transmit descriptor. */
++ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
++ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
++ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
++ td->status = DMA_TX_OWN;
++
++ /* kick transmitter last */
++ sp->dma_regs->xmt_poll = 0;
++
++ sp->tx_skb[idx] = skb;
++ idx = DSC_NEXT(idx);
++ sp->tx_prd = idx;
++
++ return 0;
++}
++
++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ switch (cmd) {
++ case SIOCGMIIPHY:
++ case SIOCGMIIREG:
++ case SIOCSMIIREG:
++ return phy_mii_ioctl(sp->phy_dev, ifr, cmd);
++
++ default:
++ break;
++ }
++
++ return -EOPNOTSUPP;
++}
++
++static void ar231x_adjust_link(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ struct phy_device *phydev = sp->phy_dev;
++ u32 mc;
++
++ if (!phydev->link) {
++ if (sp->link) {
++ pr_info("%s: link down\n", dev->name);
++ sp->link = 0;
++ }
++ return;
++ }
++ sp->link = 1;
++
++ pr_info("%s: link up (%uMbps/%s duplex)\n", dev->name,
++ phydev->speed, phydev->duplex ? "full" : "half");
++
++ mc = sp->eth_regs->mac_control;
++ if (phydev->duplex)
++ mc = (mc | MAC_CONTROL_F) & ~MAC_CONTROL_DRO;
++ else
++ mc = (mc | MAC_CONTROL_DRO) & ~MAC_CONTROL_F;
++ sp->eth_regs->mac_control = mc;
++ sp->duplex = phydev->duplex;
++}
++
++#define MII_ADDR(phy, reg) \
++ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
++
++static int
++ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
++{
++ struct net_device *const dev = bus->priv;
++ struct ar231x_private *sp = netdev_priv(dev);
++ volatile MII *ethernet = sp->phy_regs;
++
++ ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
++ while (ethernet->mii_addr & MII_ADDR_BUSY)
++ ;
++ return ethernet->mii_data >> MII_DATA_SHIFT;
++}
++
++static int
++ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
++{
++ struct net_device *const dev = bus->priv;
++ struct ar231x_private *sp = netdev_priv(dev);
++ volatile MII *ethernet = sp->phy_regs;
++
++ while (ethernet->mii_addr & MII_ADDR_BUSY)
++ ;
++ ethernet->mii_data = value << MII_DATA_SHIFT;
++ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
++
++ return 0;
++}
++
++static int ar231x_mdiobus_reset(struct mii_bus *bus)
++{
++ struct net_device *const dev = bus->priv;
++
++ ar231x_reset_reg(dev);
++
++ return 0;
++}
++
++static int ar231x_mdiobus_probe(struct net_device *dev)
++{
++ struct ar231x_private *const sp = netdev_priv(dev);
++ struct phy_device *phydev = NULL;
++
++ /* find the first (lowest address) PHY on the current MAC's MII bus */
++ phydev = phy_find_first(sp->mii_bus);
++ if (!phydev) {
++ printk(KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
++ return -1;
++ }
++
++ /* now we are supposed to have a proper phydev, to attach to... */
++ BUG_ON(phydev->attached_dev);
++
++ phydev = phy_connect(dev, phydev_name(phydev), &ar231x_adjust_link,
++ PHY_INTERFACE_MODE_MII);
++ if (IS_ERR(phydev)) {
++ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++ return PTR_ERR(phydev);
++ }
++
++ /* mask with MAC supported features */
++ phydev->supported &= (SUPPORTED_10baseT_Half
++ | SUPPORTED_10baseT_Full
++ | SUPPORTED_100baseT_Half
++ | SUPPORTED_100baseT_Full
++ | SUPPORTED_Autoneg
++ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
++ | SUPPORTED_MII
++ | SUPPORTED_TP);
++
++ phydev->advertising = phydev->supported;
++
++ sp->phy_dev = phydev;
++
++ printk(KERN_INFO "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
++ dev->name, phydev->drv->name, phydev_name(phydev));
++
++ return 0;
++}
++
+--- /dev/null
++++ b/drivers/net/ethernet/atheros/ar231x/ar231x.h
+@@ -0,0 +1,281 @@
++/*
++ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
++ *
++ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef _AR2313_H_
++#define _AR2313_H_
++
++#include <linux/interrupt.h>
++#include <generated/autoconf.h>
++#include <linux/bitops.h>
++#include <ath25_platform.h>
++
++/* probe link timer - 5 secs */
++#define LINK_TIMER (5*HZ)
++
++#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
++#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
++#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
++
++#define AR2313_TX_TIMEOUT (HZ/4)
++
++/* Rings */
++#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
++#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
++
++#define AR2313_MBGET 2
++#define AR2313_MBSET 3
++#define AR2313_PCI_RECONFIG 4
++#define AR2313_PCI_DUMP 5
++#define AR2313_TEST_PANIC 6
++#define AR2313_TEST_NULLPTR 7
++#define AR2313_READ_DATA 8
++#define AR2313_WRITE_DATA 9
++#define AR2313_GET_VERSION 10
++#define AR2313_TEST_HANG 11
++#define AR2313_SYNC 12
++
++#define DMA_RX_ERR_CRC BIT(1)
++#define DMA_RX_ERR_DRIB BIT(2)
++#define DMA_RX_ERR_MII BIT(3)
++#define DMA_RX_EV2 BIT(5)
++#define DMA_RX_ERR_COL BIT(6)
++#define DMA_RX_LONG BIT(7)
++#define DMA_RX_LS BIT(8) /* last descriptor */
++#define DMA_RX_FS BIT(9) /* first descriptor */
++#define DMA_RX_MF BIT(10) /* multicast frame */
++#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */
++#define DMA_RX_ERR_LENGTH BIT(12) /* length error */
++#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */
++#define DMA_RX_ERROR BIT(15) /* error summary */
++#define DMA_RX_LEN_MASK 0x3fff0000
++#define DMA_RX_LEN_SHIFT 16
++#define DMA_RX_FILT BIT(30)
++#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */
++
++#define DMA_RX1_BSIZE_MASK 0x000007ff
++#define DMA_RX1_BSIZE_SHIFT 0
++#define DMA_RX1_CHAINED BIT(24)
++#define DMA_RX1_RER BIT(25)
++
++#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */
++#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */
++#define DMA_TX_COL_MASK 0x78
++#define DMA_TX_COL_SHIFT 3
++#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */
++#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */
++#define DMA_TX_ERR_LATE BIT(9) /* late collision */
++#define DMA_TX_ERR_LINK BIT(10) /* no carrier */
++#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */
++#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */
++#define DMA_TX_ERROR BIT(15) /* frame aborted */
++#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */
++
++#define DMA_TX1_BSIZE_MASK 0x000007ff
++#define DMA_TX1_BSIZE_SHIFT 0
++#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */
++#define DMA_TX1_TER BIT(25) /* transmit end of ring */
++#define DMA_TX1_FS BIT(29) /* first segment */
++#define DMA_TX1_LS BIT(30) /* last segment */
++#define DMA_TX1_IC BIT(31) /* interrupt on completion */
++
++#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
++
++#define MAC_CONTROL_RE BIT(2) /* receive enable */
++#define MAC_CONTROL_TE BIT(3) /* transmit enable */
++#define MAC_CONTROL_DC BIT(5) /* Deferral check */
++#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */
++#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */
++#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */
++#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */
++#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */
++#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */
++#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */
++#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */
++#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */
++#define MAC_CONTROL_PR BIT(18) /* promis mode (valid frames only) */
++#define MAC_CONTROL_PM BIT(19) /* pass multicast */
++#define MAC_CONTROL_F BIT(20) /* full-duplex */
++#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */
++#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */
++#define MAC_CONTROL_BLE BIT(30) /* big endian mode */
++#define MAC_CONTROL_RA BIT(31) /* rcv all (valid and invalid frames) */
++
++#define MII_ADDR_BUSY BIT(0)
++#define MII_ADDR_WRITE BIT(1)
++#define MII_ADDR_REG_SHIFT 6
++#define MII_ADDR_PHY_SHIFT 11
++#define MII_DATA_SHIFT 0
++
++#define FLOW_CONTROL_FCE BIT(1)
++
++#define DMA_BUS_MODE_SWR BIT(0) /* software reset */
++#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */
++#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
++#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */
++
++#define DMA_STATUS_TI BIT(0) /* transmit interrupt */
++#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */
++#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */
++#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */
++#define DMA_STATUS_UNF BIT(5) /* transmit underflow */
++#define DMA_STATUS_RI BIT(6) /* receive interrupt */
++#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */
++#define DMA_STATUS_RPS BIT(8) /* receive process stopped */
++#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */
++#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */
++#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */
++#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */
++#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */
++#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
++#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
++#define DMA_STATUS_EB_SHIFT 23 /* error bits */
++
++#define DMA_CONTROL_SR BIT(1) /* start receive */
++#define DMA_CONTROL_ST BIT(13) /* start transmit */
++#define DMA_CONTROL_SF BIT(21) /* store and forward */
++
++typedef struct {
++ volatile unsigned int status; /* OWN, Device control and status. */
++ volatile unsigned int devcs; /* pkt Control bits + Length */
++ volatile unsigned int addr; /* Current Address. */
++ volatile unsigned int descr; /* Next descriptor in chain. */
++} ar231x_descr_t;
++
++/**
++ * New Combo structure for Both Eth0 AND eth1
++ *
++ * Don't directly access MII related regs since phy chip could be actually
++ * connected to another ethernet block.
++ */
++typedef struct {
++ volatile unsigned int mac_control; /* 0x00 */
++ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
++ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
++ volatile unsigned int __mii_addr; /* 0x14 */
++ volatile unsigned int __mii_data; /* 0x18 */
++ volatile unsigned int flow_control; /* 0x1c */
++ volatile unsigned int vlan_tag; /* 0x20 */
++ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
++ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
++} ETHERNET_STRUCT;
++
++typedef struct {
++ volatile unsigned int mii_addr;
++ volatile unsigned int mii_data;
++} MII;
++
++/********************************************************************
++ * Interrupt controller
++ ********************************************************************/
++
++typedef struct {
++ volatile unsigned int wdog_control; /* 0x08 */
++ volatile unsigned int wdog_timer; /* 0x0c */
++ volatile unsigned int misc_status; /* 0x10 */
++ volatile unsigned int misc_mask; /* 0x14 */
++ volatile unsigned int global_status; /* 0x18 */
++ volatile unsigned int reserved; /* 0x1c */
++ volatile unsigned int reset_control; /* 0x20 */
++} INTERRUPT;
++
++/********************************************************************
++ * DMA controller
++ ********************************************************************/
++typedef struct {
++ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
++ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
++ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
++ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
++ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
++ volatile unsigned int status; /* 0x14 (CSR5) */
++ volatile unsigned int control; /* 0x18 (CSR6) */
++ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
++ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
++ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
++ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
++ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
++} DMA;
++
++/**
++ * Struct private for the Sibyte.
++ *
++ * Elements are grouped so variables used by the tx handling goes
++ * together, and will go into the same cache lines etc. in order to
++ * avoid cache line contention between the rx and tx handling on SMP.
++ *
++ * Frequently accessed variables are put at the beginning of the
++ * struct to help the compiler generate better/shorter code.
++ */
++struct ar231x_private {
++ struct net_device *dev;
++ int version;
++ u32 mb[2];
++
++ volatile MII *phy_regs;
++ volatile ETHERNET_STRUCT *eth_regs;
++ volatile DMA *dma_regs;
++ struct ar231x_eth *cfg;
++
++ spinlock_t lock; /* Serialise access to device */
++
++ /* RX and TX descriptors, must be adjacent */
++ ar231x_descr_t *rx_ring;
++ ar231x_descr_t *tx_ring;
++
++ struct sk_buff **rx_skb;
++ struct sk_buff **tx_skb;
++
++ /* RX elements */
++ u32 rx_skbprd;
++ u32 cur_rx;
++
++ /* TX elements */
++ u32 tx_prd;
++ u32 tx_csm;
++
++ /* Misc elements */
++ char name[48];
++ struct {
++ u32 address;
++ u32 length;
++ char *mapping;
++ } desc;
++
++ unsigned short link; /* 0 - link down, 1 - link up */
++ unsigned short duplex; /* 0 - half, 1 - full */
++
++ struct tasklet_struct rx_tasklet;
++ int unloading;
++
++ struct phy_device *phy_dev;
++ struct mii_bus *mii_bus;
++};
++
++/* Prototypes */
++static int ar231x_init(struct net_device *dev);
++#ifdef TX_TIMEOUT
++static void ar231x_tx_timeout(struct net_device *dev);
++#endif
++static int ar231x_restart(struct net_device *dev);
++static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
++static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
++static int ar231x_open(struct net_device *dev);
++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
++static int ar231x_close(struct net_device *dev);
++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
++static void ar231x_init_cleanup(struct net_device *dev);
++
++#endif /* _AR2313_H_ */
+--- a/arch/mips/ath25/ar2315_regs.h
++++ b/arch/mips/ath25/ar2315_regs.h
+@@ -57,6 +57,9 @@
+ #define AR2315_PCI_EXT_BASE 0x80000000 /* PCI external */
+ #define AR2315_PCI_EXT_SIZE 0x40000000
+
++/* MII registers offset inside Ethernet MMR region */
++#define AR2315_ENET0_MII_BASE (AR2315_ENET0_BASE + 0x14)
++
+ /*
+ * Configuration registers
+ */
+--- a/arch/mips/ath25/ar5312_regs.h
++++ b/arch/mips/ath25/ar5312_regs.h
+@@ -64,6 +64,10 @@
+ #define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+ #define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+
++/* MII registers offset inside Ethernet MMR region */
++#define AR5312_ENET0_MII_BASE (AR5312_ENET0_BASE + 0x14)
++#define AR5312_ENET1_MII_BASE (AR5312_ENET1_BASE + 0x14)
++
+ /* Reset/Timer Block Address Map */
+ #define AR5312_TIMER 0x0000 /* countdown timer */
+ #define AR5312_RELOAD 0x0004 /* timer reload value */
+--- a/arch/mips/ath25/ar2315.c
++++ b/arch/mips/ath25/ar2315.c
+@@ -136,6 +136,8 @@ static void ar2315_irq_dispatch(void)
+
+ if (pending & CAUSEF_IP3)
+ do_IRQ(AR2315_IRQ_WLAN0);
++ else if (pending & CAUSEF_IP4)
++ do_IRQ(AR2315_IRQ_ENET0);
+ #ifdef CONFIG_PCI_AR2315
+ else if (pending & CAUSEF_IP5)
+ do_IRQ(AR2315_IRQ_LCBUS_PCI);
+@@ -169,6 +171,29 @@ void __init ar2315_arch_init_irq(void)
+ ar2315_misc_irq_domain = domain;
+ }
+
++static void ar2315_device_reset_set(u32 mask)
++{
++ u32 val;
++
++ val = ar2315_rst_reg_read(AR2315_RESET);
++ ar2315_rst_reg_write(AR2315_RESET, val | mask);
++}
++
++static void ar2315_device_reset_clear(u32 mask)
++{
++ u32 val;
++
++ val = ar2315_rst_reg_read(AR2315_RESET);
++ ar2315_rst_reg_write(AR2315_RESET, val & ~mask);
++}
++
++static struct ar231x_eth ar2315_eth_data = {
++ .reset_set = ar2315_device_reset_set,
++ .reset_clear = ar2315_device_reset_clear,
++ .reset_mac = AR2315_RESET_ENET0,
++ .reset_phy = AR2315_RESET_EPHY0,
++};
++
+ static struct resource ar2315_gpio_res[] = {
+ {
+ .name = "ar2315-gpio",
+@@ -205,6 +230,11 @@ void __init ar2315_init_devices(void)
+ ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
+ platform_device_register(&ar2315_gpio);
+
++ ar2315_eth_data.macaddr = ath25_board.config->enet0_mac;
++ ath25_add_ethernet(0, AR2315_ENET0_BASE, "eth0_mii",
++ AR2315_ENET0_MII_BASE, AR2315_IRQ_ENET0,
++ &ar2315_eth_data);
++
+ ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0);
+ }
+
+--- a/arch/mips/ath25/ar5312.c
++++ b/arch/mips/ath25/ar5312.c
+@@ -132,6 +132,10 @@ static void ar5312_irq_dispatch(void)
+
+ if (pending & CAUSEF_IP2)
+ do_IRQ(AR5312_IRQ_WLAN0);
++ else if (pending & CAUSEF_IP3)
++ do_IRQ(AR5312_IRQ_ENET0);
++ else if (pending & CAUSEF_IP4)
++ do_IRQ(AR5312_IRQ_ENET1);
+ else if (pending & CAUSEF_IP5)
+ do_IRQ(AR5312_IRQ_WLAN1);
+ else if (pending & CAUSEF_IP6)
+@@ -163,6 +167,36 @@ void __init ar5312_arch_init_irq(void)
+ ar5312_misc_irq_domain = domain;
+ }
+
++static void ar5312_device_reset_set(u32 mask)
++{
++ u32 val;
++
++ val = ar5312_rst_reg_read(AR5312_RESET);
++ ar5312_rst_reg_write(AR5312_RESET, val | mask);
++}
++
++static void ar5312_device_reset_clear(u32 mask)
++{
++ u32 val;
++
++ val = ar5312_rst_reg_read(AR5312_RESET);
++ ar5312_rst_reg_write(AR5312_RESET, val & ~mask);
++}
++
++static struct ar231x_eth ar5312_eth0_data = {
++ .reset_set = ar5312_device_reset_set,
++ .reset_clear = ar5312_device_reset_clear,
++ .reset_mac = AR5312_RESET_ENET0,
++ .reset_phy = AR5312_RESET_EPHY0,
++};
++
++static struct ar231x_eth ar5312_eth1_data = {
++ .reset_set = ar5312_device_reset_set,
++ .reset_clear = ar5312_device_reset_clear,
++ .reset_mac = AR5312_RESET_ENET1,
++ .reset_phy = AR5312_RESET_EPHY1,
++};
++
+ static struct physmap_flash_data ar5312_flash_data = {
+ .width = 2,
+ };
+@@ -243,6 +277,7 @@ static void __init ar5312_flash_init(voi
+ void __init ar5312_init_devices(void)
+ {
+ struct ath25_boarddata *config;
++ u8 *c;
+
+ ar5312_flash_init();
+
+@@ -266,8 +301,30 @@ void __init ar5312_init_devices(void)
+
+ platform_device_register(&ar5312_gpio);
+
++ /* Fix up MAC addresses if necessary */
++ if (is_broadcast_ether_addr(config->enet0_mac))
++ ether_addr_copy(config->enet0_mac, config->enet1_mac);
++
++ /* If ENET0 and ENET1 have the same mac address,
++ * increment the one from ENET1 */
++ if (ether_addr_equal(config->enet0_mac, config->enet1_mac)) {
++ c = config->enet1_mac + 5;
++ while ((c >= config->enet1_mac) && !(++(*c)))
++ c--;
++ }
++
+ switch (ath25_soc) {
+ case ATH25_SOC_AR5312:
++ ar5312_eth0_data.macaddr = config->enet0_mac;
++ ath25_add_ethernet(0, AR5312_ENET0_BASE, "eth0_mii",
++ AR5312_ENET0_MII_BASE, AR5312_IRQ_ENET0,
++ &ar5312_eth0_data);
++
++ ar5312_eth1_data.macaddr = config->enet1_mac;
++ ath25_add_ethernet(1, AR5312_ENET1_BASE, "eth1_mii",
++ AR5312_ENET1_MII_BASE, AR5312_IRQ_ENET1,
++ &ar5312_eth1_data);
++
+ if (!ath25_board.radio)
+ return;
+
+@@ -276,8 +333,18 @@ void __init ar5312_init_devices(void)
+
+ ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0);
+ break;
++ /*
++ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
++ * of ENET1. Atheros calls it 'twisted' for a reason :)
++ */
+ case ATH25_SOC_AR2312:
+ case ATH25_SOC_AR2313:
++ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
++ ar5312_eth1_data.macaddr = config->enet0_mac;
++ ath25_add_ethernet(1, AR5312_ENET1_BASE, "eth0_mii",
++ AR5312_ENET0_MII_BASE, AR5312_IRQ_ENET1,
++ &ar5312_eth1_data);
++
+ if (!ath25_board.radio)
+ return;
+ break;
+--- a/arch/mips/ath25/devices.h
++++ b/arch/mips/ath25/devices.h
+@@ -33,6 +33,8 @@ extern struct ar231x_board_config ath25_
+ extern void (*ath25_irq_dispatch)(void);
+
+ int ath25_find_config(phys_addr_t offset, unsigned long size);
++int ath25_add_ethernet(int nr, u32 base, const char *mii_name, u32 mii_base,
++ int irq, void *pdata);
+ void ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk);
+ int ath25_add_wmac(int nr, u32 base, int irq);
+
+--- a/arch/mips/ath25/devices.c
++++ b/arch/mips/ath25/devices.c
+@@ -13,6 +13,51 @@
+ struct ar231x_board_config ath25_board;
+ enum ath25_soc_type ath25_soc = ATH25_SOC_UNKNOWN;
+
++static struct resource ath25_eth0_res[] = {
++ {
++ .name = "eth0_membase",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "eth0_mii",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "eth0_irq",
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct resource ath25_eth1_res[] = {
++ {
++ .name = "eth1_membase",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "eth1_mii",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "eth1_irq",
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct platform_device ath25_eth[] = {
++ {
++ .id = 0,
++ .name = "ar231x-eth",
++ .resource = ath25_eth0_res,
++ .num_resources = ARRAY_SIZE(ath25_eth0_res)
++ },
++ {
++ .id = 1,
++ .name = "ar231x-eth",
++ .resource = ath25_eth1_res,
++ .num_resources = ARRAY_SIZE(ath25_eth1_res)
++ }
++};
++
+ static struct resource ath25_wmac0_res[] = {
+ {
+ .name = "wmac0_membase",
+@@ -71,6 +116,25 @@ const char *get_system_type(void)
+ return soc_type_strings[ath25_soc];
+ }
+
++int __init ath25_add_ethernet(int nr, u32 base, const char *mii_name,
++ u32 mii_base, int irq, void *pdata)
++{
++ struct resource *res;
++
++ ath25_eth[nr].dev.platform_data = pdata;
++ res = &ath25_eth[nr].resource[0];
++ res->start = base;
++ res->end = base + 0x2000 - 1;
++ res++;
++ res->name = mii_name;
++ res->start = mii_base;
++ res->end = mii_base + 8 - 1;
++ res++;
++ res->start = irq;
++ res->end = irq;
++ return platform_device_register(&ath25_eth[nr]);
++}
++
+ void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk)
+ {
+ struct uart_port s;
+--- a/arch/mips/include/asm/mach-ath25/ath25_platform.h
++++ b/arch/mips/include/asm/mach-ath25/ath25_platform.h
+@@ -71,4 +71,15 @@ struct ar231x_board_config {
+ const char *radio;
+ };
+
++/*
++ * Platform device information for the Ethernet MAC
++ */
++struct ar231x_eth {
++ void (*reset_set)(u32);
++ void (*reset_clear)(u32);
++ u32 reset_mac;
++ u32 reset_phy;
++ char *macaddr;
++};
++
+ #endif /* __ASM_MACH_ATH25_PLATFORM_H */
diff --git a/target/linux/ath25/patches-4.14/120-spiflash.patch b/target/linux/ath25/patches-4.14/120-spiflash.patch
new file mode 100644
index 0000000000..0a2161fb7e
--- /dev/null
+++ b/target/linux/ath25/patches-4.14/120-spiflash.patch
@@ -0,0 +1,634 @@
+--- a/drivers/mtd/devices/Kconfig
++++ b/drivers/mtd/devices/Kconfig
+@@ -130,6 +130,10 @@ config MTD_BCM47XXSFLASH
+ registered by bcma as platform devices. This enables driver for
+ serial flash memories.
+
++config MTD_AR2315
++ tristate "Atheros AR2315+ SPI Flash support"
++ depends on SOC_AR2315
++
+ config MTD_SLRAM
+ tristate "Uncached system RAM"
+ help
+--- a/drivers/mtd/devices/Makefile
++++ b/drivers/mtd/devices/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_M25P80) += m25p80.o
+ obj-$(CONFIG_MTD_MCHP23K256) += mchp23k256.o
+ obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o
+ obj-$(CONFIG_MTD_SST25L) += sst25l.o
++obj-$(CONFIG_MTD_AR2315) += ar2315.o
+ obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o
+ obj-$(CONFIG_MTD_ST_SPI_FSM) += st_spi_fsm.o
+ obj-$(CONFIG_MTD_POWERNV_FLASH) += powernv_flash.o
+--- /dev/null
++++ b/drivers/mtd/devices/ar2315.c
+@@ -0,0 +1,459 @@
++
++/*
++ * MTD driver for the SPI Flash Memory support on Atheros AR2315
++ *
++ * Copyright (c) 2005-2006 Atheros Communications Inc.
++ * Copyright (C) 2006-2007 FON Technology, SL.
++ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
++ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
++ *
++ * This code is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/sched.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/mutex.h>
++
++#include "ar2315_spiflash.h"
++
++#define DRIVER_NAME "ar2315-spiflash"
++
++#define busy_wait(_priv, _condition, _wait) do { \
++ while (_condition) { \
++ if (_wait > 1) \
++ msleep(_wait); \
++ else if ((_wait == 1) && need_resched()) \
++ schedule(); \
++ else \
++ udelay(1); \
++ } \
++} while (0)
++
++enum {
++ FLASH_NONE,
++ FLASH_1MB,
++ FLASH_2MB,
++ FLASH_4MB,
++ FLASH_8MB,
++ FLASH_16MB,
++};
++
++/* Flash configuration table */
++struct flashconfig {
++ u32 byte_cnt;
++ u32 sector_cnt;
++ u32 sector_size;
++};
++
++static const struct flashconfig flashconfig_tbl[] = {
++ [FLASH_NONE] = { 0, 0, 0},
++ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT,
++ STM_1MB_SECTOR_SIZE},
++ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT,
++ STM_2MB_SECTOR_SIZE},
++ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT,
++ STM_4MB_SECTOR_SIZE},
++ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT,
++ STM_8MB_SECTOR_SIZE},
++ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT,
++ STM_16MB_SECTOR_SIZE}
++};
++
++/* Mapping of generic opcodes to STM serial flash opcodes */
++enum {
++ SPI_WRITE_ENABLE,
++ SPI_WRITE_DISABLE,
++ SPI_RD_STATUS,
++ SPI_WR_STATUS,
++ SPI_RD_DATA,
++ SPI_FAST_RD_DATA,
++ SPI_PAGE_PROGRAM,
++ SPI_SECTOR_ERASE,
++ SPI_BULK_ERASE,
++ SPI_DEEP_PWRDOWN,
++ SPI_RD_SIG,
++};
++
++struct opcodes {
++ __u16 code;
++ __s8 tx_cnt;
++ __s8 rx_cnt;
++};
++
++static const struct opcodes stm_opcodes[] = {
++ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
++ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
++ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
++ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
++ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
++ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
++ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
++ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
++ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
++ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
++ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
++};
++
++/* Driver private data structure */
++struct spiflash_priv {
++ struct mtd_info mtd;
++ void __iomem *readaddr; /* memory mapped data for read */
++ void __iomem *mmraddr; /* memory mapped register space */
++ struct mutex lock; /* serialize registers access */
++};
++
++#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
++
++enum {
++ FL_READY,
++ FL_READING,
++ FL_ERASING,
++ FL_WRITING
++};
++
++/*****************************************************************************/
++
++static u32
++spiflash_read_reg(struct spiflash_priv *priv, int reg)
++{
++ return ioread32(priv->mmraddr + reg);
++}
++
++static void
++spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
++{
++ iowrite32(data, priv->mmraddr + reg);
++}
++
++static u32
++spiflash_wait_busy(struct spiflash_priv *priv)
++{
++ u32 reg;
++
++ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
++ SPI_CTL_BUSY, 0);
++ return reg;
++}
++
++static u32
++spiflash_sendcmd(struct spiflash_priv *priv, int opcode, u32 addr)
++{
++ const struct opcodes *op;
++ u32 reg, mask;
++
++ op = &stm_opcodes[opcode];
++ reg = spiflash_wait_busy(priv);
++ spiflash_write_reg(priv, SPI_FLASH_OPCODE,
++ ((u32)op->code) | (addr << 8));
++
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
++
++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++ spiflash_wait_busy(priv);
++
++ if (!op->rx_cnt)
++ return 0;
++
++ reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
++
++ switch (op->rx_cnt) {
++ case 1:
++ mask = 0x000000ff;
++ break;
++ case 2:
++ mask = 0x0000ffff;
++ break;
++ case 3:
++ mask = 0x00ffffff;
++ break;
++ default:
++ mask = 0xffffffff;
++ break;
++ }
++ reg &= mask;
++
++ return reg;
++}
++
++/*
++ * Probe SPI flash device
++ * Function returns 0 for failure.
++ * and flashconfig_tbl array index for success.
++ */
++static int
++spiflash_probe_chip(struct platform_device *pdev, struct spiflash_priv *priv)
++{
++ u32 sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
++ int flash_size;
++
++ switch (sig) {
++ case STM_8MBIT_SIGNATURE:
++ flash_size = FLASH_1MB;
++ break;
++ case STM_16MBIT_SIGNATURE:
++ flash_size = FLASH_2MB;
++ break;
++ case STM_32MBIT_SIGNATURE:
++ flash_size = FLASH_4MB;
++ break;
++ case STM_64MBIT_SIGNATURE:
++ flash_size = FLASH_8MB;
++ break;
++ case STM_128MBIT_SIGNATURE:
++ flash_size = FLASH_16MB;
++ break;
++ default:
++ dev_warn(&pdev->dev, "read of flash device signature failed!\n");
++ return 0;
++ }
++
++ return flash_size;
++}
++
++static void
++spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout)
++{
++ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
++ SPI_STATUS_WIP, timeout);
++}
++
++static int
++spiflash_erase(struct mtd_info *mtd, struct erase_info *instr)
++{
++ struct spiflash_priv *priv = to_spiflash(mtd);
++ const struct opcodes *op;
++ u32 temp, reg;
++
++ if (instr->addr + instr->len > mtd->size)
++ return -EINVAL;
++
++ mutex_lock(&priv->lock);
++
++ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
++ reg = spiflash_wait_busy(priv);
++
++ op = &stm_opcodes[SPI_SECTOR_ERASE];
++ temp = ((u32)instr->addr << 8) | (u32)(op->code);
++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
++
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= op->tx_cnt | SPI_CTL_START;
++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++
++ spiflash_wait_complete(priv, 20);
++
++ mutex_unlock(&priv->lock);
++
++ instr->state = MTD_ERASE_DONE;
++ mtd_erase_callback(instr);
++
++ return 0;
++}
++
++static int
++spiflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
++ u_char *buf)
++{
++ struct spiflash_priv *priv = to_spiflash(mtd);
++
++ if (!len)
++ return 0;
++
++ if (from + len > mtd->size)
++ return -EINVAL;
++
++ *retlen = len;
++
++ mutex_lock(&priv->lock);
++
++ memcpy_fromio(buf, priv->readaddr + from, len);
++
++ mutex_unlock(&priv->lock);
++
++ return 0;
++}
++
++static int
++spiflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
++ const u8 *buf)
++{
++ struct spiflash_priv *priv = to_spiflash(mtd);
++ u32 opcode, bytes_left;
++
++ *retlen = 0;
++
++ if (!len)
++ return 0;
++
++ if (to + len > mtd->size)
++ return -EINVAL;
++
++ bytes_left = len;
++
++ do {
++ u32 read_len, reg, page_offset, spi_data = 0;
++
++ read_len = min(bytes_left, sizeof(u32));
++
++ /* 32-bit writes cannot span across a page boundary
++ * (256 bytes). This types of writes require two page
++ * program operations to handle it correctly. The STM part
++ * will write the overflow data to the beginning of the
++ * current page as opposed to the subsequent page.
++ */
++ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
++
++ if (page_offset > STM_PAGE_SIZE)
++ read_len -= (page_offset - STM_PAGE_SIZE);
++
++ mutex_lock(&priv->lock);
++
++ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
++ spi_data = 0;
++ switch (read_len) {
++ case 4:
++ spi_data |= buf[3] << 24;
++ /* fall through */
++ case 3:
++ spi_data |= buf[2] << 16;
++ /* fall through */
++ case 2:
++ spi_data |= buf[1] << 8;
++ /* fall through */
++ case 1:
++ spi_data |= buf[0] & 0xff;
++ break;
++ default:
++ break;
++ }
++
++ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
++ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
++ (to & 0x00ffffff) << 8;
++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
++
++ reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= (read_len + 4) | SPI_CTL_START;
++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++
++ spiflash_wait_complete(priv, 1);
++
++ mutex_unlock(&priv->lock);
++
++ bytes_left -= read_len;
++ to += read_len;
++ buf += read_len;
++
++ *retlen += read_len;
++ } while (bytes_left != 0);
++
++ return 0;
++}
++
++#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS
++static const char * const part_probe_types[] = {
++ "cmdlinepart", "RedBoot", "MyLoader", NULL
++};
++#endif
++
++static int
++spiflash_probe(struct platform_device *pdev)
++{
++ struct spiflash_priv *priv;
++ struct mtd_info *mtd;
++ struct resource *res;
++ int index;
++ int result = 0;
++
++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++
++ mutex_init(&priv->lock);
++ mtd = &priv->mtd;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ priv->mmraddr = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(priv->mmraddr)) {
++ dev_warn(&pdev->dev, "failed to map flash MMR\n");
++ return PTR_ERR(priv->mmraddr);
++ }
++
++ index = spiflash_probe_chip(pdev, priv);
++ if (!index) {
++ dev_warn(&pdev->dev, "found no flash device\n");
++ return -ENODEV;
++ }
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ priv->readaddr = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(priv->readaddr)) {
++ dev_warn(&pdev->dev, "failed to map flash read mem\n");
++ return PTR_ERR(priv->readaddr);
++ }
++
++ platform_set_drvdata(pdev, priv);
++ mtd->name = "spiflash";
++ mtd->type = MTD_NORFLASH;
++ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
++ mtd->size = flashconfig_tbl[index].byte_cnt;
++ mtd->erasesize = flashconfig_tbl[index].sector_size;
++ mtd->writesize = 1;
++ mtd->numeraseregions = 0;
++ mtd->eraseregions = NULL;
++ mtd->_erase = spiflash_erase;
++ mtd->_read = spiflash_read;
++ mtd->_write = spiflash_write;
++ mtd->owner = THIS_MODULE;
++
++ dev_info(&pdev->dev, "%lld Kbytes flash detected\n", mtd->size >> 10);
++
++#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS
++ /* parse redboot partitions */
++
++ result = mtd_device_parse_register(mtd, part_probe_types,
++ NULL, NULL, 0);
++#endif
++
++ return result;
++}
++
++static int
++spiflash_remove(struct platform_device *pdev)
++{
++ struct spiflash_priv *priv = platform_get_drvdata(pdev);
++
++ mtd_device_unregister(&priv->mtd);
++
++ return 0;
++}
++
++static struct platform_driver spiflash_driver = {
++ .driver.name = DRIVER_NAME,
++ .probe = spiflash_probe,
++ .remove = spiflash_remove,
++};
++
++module_platform_driver(spiflash_driver);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("OpenWrt.org");
++MODULE_AUTHOR("Atheros Communications Inc");
++MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros AR2315+ SOC");
++MODULE_ALIAS("platform:" DRIVER_NAME);
++
+--- /dev/null
++++ b/drivers/mtd/devices/ar2315_spiflash.h
+@@ -0,0 +1,106 @@
++/*
++ * Atheros AR2315 SPI Flash Memory support header file.
++ *
++ * Copyright (c) 2005, Atheros Communications Inc.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
++ *
++ * This code is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#ifndef __AR2315_SPIFLASH_H
++#define __AR2315_SPIFLASH_H
++
++#define STM_PAGE_SIZE 256
++
++#define SFI_WRITE_BUFFER_SIZE 4
++#define SFI_FLASH_ADDR_MASK 0x00ffffff
++
++#define STM_8MBIT_SIGNATURE 0x13
++#define STM_M25P80_BYTE_COUNT 1048576
++#define STM_M25P80_SECTOR_COUNT 16
++#define STM_M25P80_SECTOR_SIZE 0x10000
++
++#define STM_16MBIT_SIGNATURE 0x14
++#define STM_M25P16_BYTE_COUNT 2097152
++#define STM_M25P16_SECTOR_COUNT 32
++#define STM_M25P16_SECTOR_SIZE 0x10000
++
++#define STM_32MBIT_SIGNATURE 0x15
++#define STM_M25P32_BYTE_COUNT 4194304
++#define STM_M25P32_SECTOR_COUNT 64
++#define STM_M25P32_SECTOR_SIZE 0x10000
++
++#define STM_64MBIT_SIGNATURE 0x16
++#define STM_M25P64_BYTE_COUNT 8388608
++#define STM_M25P64_SECTOR_COUNT 128
++#define STM_M25P64_SECTOR_SIZE 0x10000
++
++#define STM_128MBIT_SIGNATURE 0x17
++#define STM_M25P128_BYTE_COUNT 16777216
++#define STM_M25P128_SECTOR_COUNT 256
++#define STM_M25P128_SECTOR_SIZE 0x10000
++
++#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
++#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
++#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
++#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
++#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
++#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
++#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
++#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
++#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
++#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
++#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
++#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
++#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
++#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
++#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
++
++/*
++ * ST Microelectronics Opcodes for Serial Flash
++ */
++
++#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
++#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
++#define STM_OP_RD_STATUS 0x05 /* Read Status */
++#define STM_OP_WR_STATUS 0x01 /* Write Status */
++#define STM_OP_RD_DATA 0x03 /* Read Data */
++#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
++#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
++#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
++#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
++#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
++#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
++
++#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
++#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
++#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
++#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
++#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
++#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
++
++/*
++ * SPI Flash Interface Registers
++ */
++
++#define SPI_FLASH_CTL 0x00
++#define SPI_FLASH_OPCODE 0x04
++#define SPI_FLASH_DATA 0x08
++
++#define SPI_CTL_START 0x00000100
++#define SPI_CTL_BUSY 0x00010000
++#define SPI_CTL_TXCNT_MASK 0x0000000f
++#define SPI_CTL_RXCNT_MASK 0x000000f0
++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
++#define SPI_CTL_SIZE_MASK 0x00060000
++
++#define SPI_CTL_CLK_SEL_MASK 0x03000000
++#define SPI_OPCODE_MASK 0x000000ff
++
++#define SPI_STATUS_WIP STM_STATUS_WIP
++
++#endif
+--- a/arch/mips/ath25/ar2315.c
++++ b/arch/mips/ath25/ar2315.c
+@@ -220,6 +220,28 @@ static struct platform_device ar2315_gpi
+ .num_resources = ARRAY_SIZE(ar2315_gpio_res)
+ };
+
++static struct resource ar2315_spiflash_res[] = {
++ {
++ .name = "spiflash_read",
++ .flags = IORESOURCE_MEM,
++ .start = AR2315_SPI_READ_BASE,
++ .end = AR2315_SPI_READ_BASE + AR2315_SPI_READ_SIZE - 1,
++ },
++ {
++ .name = "spiflash_mmr",
++ .flags = IORESOURCE_MEM,
++ .start = AR2315_SPI_MMR_BASE,
++ .end = AR2315_SPI_MMR_BASE + AR2315_SPI_MMR_SIZE - 1,
++ },
++};
++
++static struct platform_device ar2315_spiflash = {
++ .id = 0,
++ .name = "ar2315-spiflash",
++ .resource = ar2315_spiflash_res,
++ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
++};
++
+ void __init ar2315_init_devices(void)
+ {
+ /* Find board configuration */
+@@ -230,6 +252,8 @@ void __init ar2315_init_devices(void)
+ ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
+ platform_device_register(&ar2315_gpio);
+
++ platform_device_register(&ar2315_spiflash);
++
+ ar2315_eth_data.macaddr = ath25_board.config->enet0_mac;
+ ath25_add_ethernet(0, AR2315_ENET0_BASE, "eth0_mii",
+ AR2315_ENET0_MII_BASE, AR2315_IRQ_ENET0,
diff --git a/target/linux/ath25/patches-4.14/130-watchdog.patch b/target/linux/ath25/patches-4.14/130-watchdog.patch
new file mode 100644
index 0000000000..890d7ad491
--- /dev/null
+++ b/target/linux/ath25/patches-4.14/130-watchdog.patch
@@ -0,0 +1,277 @@
+--- /dev/null
++++ b/drivers/watchdog/ar2315-wtd.c
+@@ -0,0 +1,209 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ *
++ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
++ * Based on EP93xx and ifxmips wdt driver
++ */
++
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/types.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/fs.h>
++#include <linux/ioport.h>
++#include <linux/notifier.h>
++#include <linux/reboot.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/uaccess.h>
++
++#define DRIVER_NAME "ar2315-wdt"
++
++#define CLOCK_RATE 40000000
++#define HEARTBEAT(x) (x < 1 || x > 90 ? 20 : x)
++
++#define WDT_REG_TIMER 0x00
++#define WDT_REG_CTRL 0x04
++
++#define WDT_CTRL_ACT_NONE 0x00000000 /* No action */
++#define WDT_CTRL_ACT_NMI 0x00000001 /* NMI on watchdog */
++#define WDT_CTRL_ACT_RESET 0x00000002 /* reset on watchdog */
++
++static int wdt_timeout = 20;
++static int started;
++static int in_use;
++static void __iomem *wdt_base;
++
++static inline void ar2315_wdt_wr(unsigned reg, u32 val)
++{
++ iowrite32(val, wdt_base + reg);
++}
++
++static void
++ar2315_wdt_enable(void)
++{
++ ar2315_wdt_wr(WDT_REG_TIMER, wdt_timeout * CLOCK_RATE);
++}
++
++static ssize_t
++ar2315_wdt_write(struct file *file, const char __user *data, size_t len,
++ loff_t *ppos)
++{
++ if (len)
++ ar2315_wdt_enable();
++ return len;
++}
++
++static int
++ar2315_wdt_open(struct inode *inode, struct file *file)
++{
++ if (in_use)
++ return -EBUSY;
++ ar2315_wdt_enable();
++ in_use = 1;
++ started = 1;
++ return nonseekable_open(inode, file);
++}
++
++static int
++ar2315_wdt_release(struct inode *inode, struct file *file)
++{
++ in_use = 0;
++ return 0;
++}
++
++static irqreturn_t
++ar2315_wdt_interrupt(int irq, void *dev)
++{
++ struct platform_device *pdev = (struct platform_device *)dev;
++
++ if (started) {
++ dev_crit(&pdev->dev, "watchdog expired, rebooting system\n");
++ emergency_restart();
++ } else {
++ ar2315_wdt_wr(WDT_REG_CTRL, 0);
++ ar2315_wdt_wr(WDT_REG_TIMER, 0);
++ }
++ return IRQ_HANDLED;
++}
++
++static struct watchdog_info ident = {
++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
++ .identity = "ar2315 Watchdog",
++};
++
++static long
++ar2315_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++ int new_wdt_timeout;
++ int ret = -ENOIOCTLCMD;
++
++ switch (cmd) {
++ case WDIOC_GETSUPPORT:
++ ret = copy_to_user((void __user *)arg, &ident, sizeof(ident)) ?
++ -EFAULT : 0;
++ break;
++ case WDIOC_KEEPALIVE:
++ ar2315_wdt_enable();
++ ret = 0;
++ break;
++ case WDIOC_SETTIMEOUT:
++ ret = get_user(new_wdt_timeout, (int __user *)arg);
++ if (ret)
++ break;
++ wdt_timeout = HEARTBEAT(new_wdt_timeout);
++ ar2315_wdt_enable();
++ break;
++ case WDIOC_GETTIMEOUT:
++ ret = put_user(wdt_timeout, (int __user *)arg);
++ break;
++ }
++ return ret;
++}
++
++static const struct file_operations ar2315_wdt_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .write = ar2315_wdt_write,
++ .unlocked_ioctl = ar2315_wdt_ioctl,
++ .open = ar2315_wdt_open,
++ .release = ar2315_wdt_release,
++};
++
++static struct miscdevice ar2315_wdt_miscdev = {
++ .minor = WATCHDOG_MINOR,
++ .name = "watchdog",
++ .fops = &ar2315_wdt_fops,
++};
++
++static int
++ar2315_wdt_probe(struct platform_device *dev)
++{
++ struct resource *mem_res, *irq_res;
++ int ret = 0;
++
++ if (wdt_base)
++ return -EBUSY;
++
++ irq_res = platform_get_resource(dev, IORESOURCE_IRQ, 0);
++ if (!irq_res) {
++ dev_err(&dev->dev, "no IRQ resource\n");
++ return -ENOENT;
++ }
++
++ mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
++ wdt_base = devm_ioremap_resource(&dev->dev, mem_res);
++ if (IS_ERR(wdt_base))
++ return PTR_ERR(wdt_base);
++
++ ret = devm_request_irq(&dev->dev, irq_res->start, ar2315_wdt_interrupt,
++ 0, DRIVER_NAME, dev);
++ if (ret) {
++ dev_err(&dev->dev, "failed to register inetrrupt\n");
++ goto out;
++ }
++
++ ret = misc_register(&ar2315_wdt_miscdev);
++ if (ret)
++ dev_err(&dev->dev, "failed to register miscdev\n");
++
++out:
++ return ret;
++}
++
++static int
++ar2315_wdt_remove(struct platform_device *dev)
++{
++ misc_deregister(&ar2315_wdt_miscdev);
++ return 0;
++}
++
++static struct platform_driver ar2315_wdt_driver = {
++ .probe = ar2315_wdt_probe,
++ .remove = ar2315_wdt_remove,
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++module_platform_driver(ar2315_wdt_driver);
++
++MODULE_DESCRIPTION("Atheros AR2315 hardware watchdog driver");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" DRIVER_NAME);
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -1646,6 +1646,13 @@ config PIC32_DMT
+ To compile this driver as a loadable module, choose M here.
+ The module will be called pic32-dmt.
+
++config AR2315_WDT
++ tristate "Atheros AR2315+ WiSoCs Watchdog Timer"
++ depends on ATH25
++ help
++ Hardware driver for the built-in watchdog timer on the Atheros
++ AR2315/AR2316 WiSoCs.
++
+ # PARISC Architecture
+
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -166,6 +166,7 @@ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
++obj-$(CONFIG_AR2315_WDT) += ar2315-wtd.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+ octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+--- a/arch/mips/ath25/ar2315.c
++++ b/arch/mips/ath25/ar2315.c
+@@ -220,6 +220,24 @@ static struct platform_device ar2315_gpi
+ .num_resources = ARRAY_SIZE(ar2315_gpio_res)
+ };
+
++static struct resource ar2315_wdt_res[] = {
++ {
++ .flags = IORESOURCE_MEM,
++ .start = AR2315_RST_BASE + AR2315_WDT_TIMER,
++ .end = AR2315_RST_BASE + AR2315_WDT_TIMER + 8 - 1,
++ },
++ {
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct platform_device ar2315_wdt = {
++ .id = 0,
++ .name = "ar2315-wdt",
++ .resource = ar2315_wdt_res,
++ .num_resources = ARRAY_SIZE(ar2315_wdt_res)
++};
++
+ static struct resource ar2315_spiflash_res[] = {
+ {
+ .name = "spiflash_read",
+@@ -252,6 +270,11 @@ void __init ar2315_init_devices(void)
+ ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
+ platform_device_register(&ar2315_gpio);
+
++ ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
++ AR2315_MISC_IRQ_WATCHDOG);
++ ar2315_wdt_res[1].end = ar2315_wdt_res[1].start;
++ platform_device_register(&ar2315_wdt);
++
+ platform_device_register(&ar2315_spiflash);
+
+ ar2315_eth_data.macaddr = ath25_board.config->enet0_mac;
diff --git a/target/linux/ath25/patches-4.14/140-redboot_boardconfig.patch b/target/linux/ath25/patches-4.14/140-redboot_boardconfig.patch
new file mode 100644
index 0000000000..6aad761cb1
--- /dev/null
+++ b/target/linux/ath25/patches-4.14/140-redboot_boardconfig.patch
@@ -0,0 +1,60 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -30,6 +30,8 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/module.h>
+
++#define BOARD_CONFIG_PART "boardconfig"
++
+ struct fis_image_desc {
+ unsigned char name[16]; // Null terminated name
+ uint32_t flash_base; // Address within FLASH of image
+@@ -60,6 +62,7 @@ static int parse_redboot_partitions(stru
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+ {
++ unsigned long max_offset = 0;
+ int nrparts = 0;
+ struct fis_image_desc *buf;
+ struct mtd_partition *parts;
+@@ -225,14 +228,15 @@ static int parse_redboot_partitions(stru
+ }
+ }
+ #endif
+- parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
++ parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen +
++ sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
+
+ if (!parts) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+- nullname = (char *)&parts[nrparts];
++ nullname = (char *)&parts[nrparts + 1];
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ if (nulllen > 0) {
+ strcpy(nullname, nullstring);
+@@ -251,6 +255,8 @@ static int parse_redboot_partitions(stru
+ }
+ #endif
+ for ( ; i<nrparts; i++) {
++ if (max_offset < buf[i].flash_base + buf[i].size)
++ max_offset = buf[i].flash_base + buf[i].size;
+ parts[i].size = fl->img->size;
+ parts[i].offset = fl->img->flash_base;
+ parts[i].name = names;
+@@ -284,6 +290,13 @@ static int parse_redboot_partitions(stru
+ fl = fl->next;
+ kfree(tmp_fl);
+ }
++ if (master->size - max_offset >= master->erasesize) {
++ parts[nrparts].size = master->size - max_offset;
++ parts[nrparts].offset = max_offset;
++ parts[nrparts].name = names;
++ strcpy(names, BOARD_CONFIG_PART);
++ nrparts++;
++ }
+ ret = nrparts;
+ *pparts = parts;
+ out:
diff --git a/target/linux/ath25/patches-4.14/141-redboot_partition_scan.patch b/target/linux/ath25/patches-4.14/141-redboot_partition_scan.patch
new file mode 100644
index 0000000000..d1d281eaf4
--- /dev/null
+++ b/target/linux/ath25/patches-4.14/141-redboot_partition_scan.patch
@@ -0,0 +1,44 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -79,12 +79,18 @@ static int parse_redboot_partitions(stru
+ static char nullstring[] = "unallocated";
+ #endif
+
++ buf = vmalloc(master->erasesize);
++ if (!buf)
++ return -ENOMEM;
++
++ restart:
+ if ( directory < 0 ) {
+ offset = master->size + directory * master->erasesize;
+ while (mtd_block_isbad(master, offset)) {
+ if (!offset) {
+ nogood:
+ printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++ vfree(buf);
+ return -EIO;
+ }
+ offset -= master->erasesize;
+@@ -97,10 +103,6 @@ static int parse_redboot_partitions(stru
+ goto nogood;
+ }
+ }
+- buf = vmalloc(master->erasesize);
+-
+- if (!buf)
+- return -ENOMEM;
+
+ printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ master->name, offset);
+@@ -173,6 +175,11 @@ static int parse_redboot_partitions(stru
+ }
+ if (i == numslots) {
+ /* Didn't find it */
++ if (offset + master->erasesize < master->size) {
++ /* not at the end of the flash yet, maybe next block */
++ directory++;
++ goto restart;
++ }
+ printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ master->name);
+ ret = 0;
diff --git a/target/linux/ath25/patches-4.14/142-redboot_various_erase_size_fix.patch b/target/linux/ath25/patches-4.14/142-redboot_various_erase_size_fix.patch
new file mode 100644
index 0000000000..ce039df9f1
--- /dev/null
+++ b/target/linux/ath25/patches-4.14/142-redboot_various_erase_size_fix.patch
@@ -0,0 +1,72 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -58,6 +58,22 @@ static inline int redboot_checksum(struc
+ return 1;
+ }
+
++static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset)
++{
++ struct mtd_erase_region_info *regions = mtd->eraseregions;
++ int i;
++
++ for (i = 0; i < mtd->numeraseregions; i++) {
++ if (regions[i].offset +
++ regions[i].numblocks * regions[i].erasesize <= offset)
++ continue;
++
++ return regions[i].erasesize;
++ }
++
++ return mtd->erasesize;
++}
++
+ static int parse_redboot_partitions(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+@@ -74,6 +90,7 @@ static int parse_redboot_partitions(stru
+ int namelen = 0;
+ int nulllen = 0;
+ int numslots;
++ int first_slot;
+ unsigned long offset;
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ static char nullstring[] = "unallocated";
+@@ -186,7 +203,10 @@ static int parse_redboot_partitions(stru
+ goto out;
+ }
+
+- for (i = 0; i < numslots; i++) {
++ first_slot = (buf[i].flash_base & (master->erasesize - 1)) /
++ sizeof(struct fis_image_desc);
++
++ for (i = first_slot; i < first_slot + numslots; i++) {
+ struct fis_list *new_fl, **prev;
+
+ if (buf[i].name[0] == 0xff) {
+@@ -262,12 +282,13 @@ static int parse_redboot_partitions(stru
+ }
+ #endif
+ for ( ; i<nrparts; i++) {
+- if (max_offset < buf[i].flash_base + buf[i].size)
+- max_offset = buf[i].flash_base + buf[i].size;
+ parts[i].size = fl->img->size;
+ parts[i].offset = fl->img->flash_base;
+ parts[i].name = names;
+
++ if (max_offset < parts[i].offset + parts[i].size)
++ max_offset = parts[i].offset + parts[i].size;
++
+ strcpy(names, fl->img->name);
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY
+ if (!memcmp(names, "RedBoot", 8) ||
+@@ -297,7 +318,9 @@ static int parse_redboot_partitions(stru
+ fl = fl->next;
+ kfree(tmp_fl);
+ }
+- if (master->size - max_offset >= master->erasesize) {
++
++ if (master->size - max_offset >=
++ mtd_get_offset_erasesize(master, max_offset)) {
+ parts[nrparts].size = master->size - max_offset;
+ parts[nrparts].offset = max_offset;
+ parts[nrparts].name = names;
diff --git a/target/linux/ath25/patches-4.14/210-reset_button.patch b/target/linux/ath25/patches-4.14/210-reset_button.patch
new file mode 100644
index 0000000000..b3f7a14cda
--- /dev/null
+++ b/target/linux/ath25/patches-4.14/210-reset_button.patch
@@ -0,0 +1,71 @@
+--- a/arch/mips/ath25/Makefile
++++ b/arch/mips/ath25/Makefile
+@@ -8,7 +8,7 @@
+ # Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ #
+
+-obj-y += board.o prom.o devices.o
++obj-y += board.o prom.o devices.o reset.o
+
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+--- /dev/null
++++ b/arch/mips/ath25/reset.c
+@@ -0,0 +1,57 @@
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
++#include <ath25_platform.h>
++#include "devices.h"
++
++static int __init
++ar231x_init_reset(void)
++{
++ struct platform_device *pdev;
++ struct gpio_keys_platform_data pdata;
++ struct gpio_keys_button *p;
++ int err;
++
++ if (ath25_board.config->reset_config_gpio == 0xffff)
++ return -ENODEV;
++
++ p = kzalloc(sizeof(*p), GFP_KERNEL);
++ if (!p)
++ goto err;
++
++ p->desc = "reset";
++ p->type = EV_KEY;
++ p->code = KEY_RESTART;
++ p->debounce_interval = 60;
++ p->gpio = ath25_board.config->reset_config_gpio;
++
++ memset(&pdata, 0, sizeof(pdata));
++ pdata.poll_interval = 20;
++ pdata.buttons = p;
++ pdata.nbuttons = 1;
++
++ pdev = platform_device_alloc("gpio-keys-polled", 0);
++ if (!pdev)
++ goto err_free;
++
++ err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
++ if (err)
++ goto err_put_pdev;
++
++ err = platform_device_add(pdev);
++ if (err)
++ goto err_put_pdev;
++
++ return 0;
++
++err_put_pdev:
++ platform_device_put(pdev);
++err_free:
++ kfree(p);
++err:
++ return -ENOMEM;
++}
++
++device_initcall(ar231x_init_reset);
diff --git a/target/linux/ath25/patches-4.14/220-enet_micrel_workaround.patch b/target/linux/ath25/patches-4.14/220-enet_micrel_workaround.patch
new file mode 100644
index 0000000000..91b9792515
--- /dev/null
+++ b/target/linux/ath25/patches-4.14/220-enet_micrel_workaround.patch
@@ -0,0 +1,111 @@
+--- a/drivers/net/ethernet/atheros/ar231x/ar231x.c
++++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c
+@@ -135,6 +135,7 @@ static int ar231x_mdiobus_write(struct m
+ static int ar231x_mdiobus_reset(struct mii_bus *bus);
+ static int ar231x_mdiobus_probe(struct net_device *dev);
+ static void ar231x_adjust_link(struct net_device *dev);
++static bool no_phy;
+
+ #ifndef ERR
+ #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
+@@ -167,6 +168,32 @@ static const struct net_device_ops ar231
+ #endif
+ };
+
++static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id)
++{
++ int phy_reg;
++
++ /**
++ * Grab the bits from PHYIR1, and put them
++ * in the upper half.
++ */
++ phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
++
++ if (phy_reg < 0)
++ return -EIO;
++
++ *phy_id = (phy_reg & 0xffff) << 16;
++
++ /* Grab the bits from PHYIR2, and put them in the lower half */
++ phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
++
++ if (phy_reg < 0)
++ return -EIO;
++
++ *phy_id |= (phy_reg & 0xffff);
++
++ return 0;
++}
++
+ static int ar231x_probe(struct platform_device *pdev)
+ {
+ struct net_device *dev;
+@@ -273,6 +300,24 @@ static int ar231x_probe(struct platform_
+
+ mdiobus_register(sp->mii_bus);
+
++ /**
++ * Workaround for Micrel switch, which is only available on
++ * one PHY and cannot be configured through MDIO.
++ */
++ if (!no_phy) {
++ u32 phy_id = 0;
++
++ get_phy_id(sp->mii_bus, 1, &phy_id);
++ if (phy_id == 0x00221450)
++ no_phy = true;
++ }
++ if (no_phy) {
++ sp->link = 1;
++ netif_carrier_on(dev);
++ return 0;
++ }
++ no_phy = true;
++
+ if (ar231x_mdiobus_probe(dev) != 0) {
+ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
+ rx_tasklet_cleanup(dev);
+@@ -326,8 +371,10 @@ static int ar231x_remove(struct platform
+ rx_tasklet_cleanup(dev);
+ ar231x_init_cleanup(dev);
+ unregister_netdev(dev);
+- mdiobus_unregister(sp->mii_bus);
+- mdiobus_free(sp->mii_bus);
++ if (sp->mii_bus) {
++ mdiobus_unregister(sp->mii_bus);
++ mdiobus_free(sp->mii_bus);
++ }
+ kfree(dev);
+ return 0;
+ }
+@@ -870,7 +917,8 @@ static int ar231x_open(struct net_device
+
+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
+
+- phy_start(sp->phy_dev);
++ if (sp->phy_dev)
++ phy_start(sp->phy_dev);
+
+ return 0;
+ }
+@@ -951,7 +999,8 @@ static int ar231x_close(struct net_devic
+
+ #endif
+
+- phy_stop(sp->phy_dev);
++ if (sp->phy_dev)
++ phy_stop(sp->phy_dev);
+
+ return 0;
+ }
+@@ -995,6 +1044,9 @@ static int ar231x_ioctl(struct net_devic
+ {
+ struct ar231x_private *sp = netdev_priv(dev);
+
++ if (!sp->phy_dev)
++ return -ENODEV;
++
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
diff --git a/target/linux/ath25/patches-4.14/330-board_leds.patch b/target/linux/ath25/patches-4.14/330-board_leds.patch
new file mode 100644
index 0000000000..e357fc6a64
--- /dev/null
+++ b/target/linux/ath25/patches-4.14/330-board_leds.patch
@@ -0,0 +1,116 @@
+--- a/arch/mips/ath25/ar2315.c
++++ b/arch/mips/ath25/ar2315.c
+@@ -23,6 +23,7 @@
+ #include <linux/reboot.h>
+ #include <linux/delay.h>
+ #include <linux/gpio.h>
++#include <linux/leds.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -260,6 +261,50 @@ static struct platform_device ar2315_spi
+ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
+ };
+
++#ifdef CONFIG_LEDS_GPIO
++static struct gpio_led ar2315_leds[6];
++static struct gpio_led_platform_data ar2315_led_data = {
++ .leds = (void *)ar2315_leds,
++};
++
++static struct platform_device ar2315_gpio_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = (void *)&ar2315_led_data,
++ }
++};
++
++static void __init ar2315_init_gpio_leds(void)
++{
++ static char led_names[6][6];
++ int i, led = 0;
++
++ ar2315_led_data.num_leds = 0;
++ for (i = 1; i < 8; i++) {
++ if ((i == AR2315_RESET_GPIO) ||
++ (i == ath25_board.config->reset_config_gpio))
++ continue;
++
++ if (i == ath25_board.config->sys_led_gpio)
++ strcpy(led_names[led], "wlan");
++ else
++ sprintf(led_names[led], "gpio%d", i);
++
++ ar2315_leds[led].name = led_names[led];
++ ar2315_leds[led].gpio = i;
++ ar2315_leds[led].active_low = 0;
++ led++;
++ }
++ ar2315_led_data.num_leds = led;
++ platform_device_register(&ar2315_gpio_leds);
++}
++#else
++static inline void ar2315_init_gpio_leds(void)
++{
++}
++#endif
++
+ void __init ar2315_init_devices(void)
+ {
+ /* Find board configuration */
+@@ -270,6 +315,8 @@ void __init ar2315_init_devices(void)
+ ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
+ platform_device_register(&ar2315_gpio);
+
++ ar2315_init_gpio_leds();
++
+ ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
+ AR2315_MISC_IRQ_WATCHDOG);
+ ar2315_wdt_res[1].end = ar2315_wdt_res[1].start;
+--- a/arch/mips/ath25/ar5312.c
++++ b/arch/mips/ath25/ar5312.c
+@@ -23,6 +23,7 @@
+ #include <linux/mtd/physmap.h>
+ #include <linux/reboot.h>
+ #include <linux/gpio.h>
++#include <linux/leds.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -231,6 +232,23 @@ static struct platform_device ar5312_gpi
+ .num_resources = ARRAY_SIZE(ar5312_gpio_res),
+ };
+
++#ifdef CONFIG_LEDS_GPIO
++static struct gpio_led ar5312_leds[] = {
++ { .name = "wlan", .gpio = 0, .active_low = 1, },
++};
++
++static const struct gpio_led_platform_data ar5312_led_data = {
++ .num_leds = ARRAY_SIZE(ar5312_leds),
++ .leds = (void *)ar5312_leds,
++};
++
++static struct platform_device ar5312_gpio_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev.platform_data = (void *)&ar5312_led_data,
++};
++#endif
++
+ static void __init ar5312_flash_init(void)
+ {
+ void __iomem *flashctl_base;
+@@ -301,6 +319,11 @@ void __init ar5312_init_devices(void)
+
+ platform_device_register(&ar5312_gpio);
+
++#ifdef CONFIG_LEDS_GPIO
++ ar5312_leds[0].gpio = config->sys_led_gpio;
++ platform_device_register(&ar5312_gpio_leds);
++#endif
++
+ /* Fix up MAC addresses if necessary */
+ if (is_broadcast_ether_addr(config->enet0_mac))
+ ether_addr_copy(config->enet0_mac, config->enet1_mac);