aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar71xx')
-rw-r--r--target/linux/ar71xx/patches-4.1/821-serial-core-add-support-for-boot-console-with-arbitr.patch76
1 files changed, 76 insertions, 0 deletions
diff --git a/target/linux/ar71xx/patches-4.1/821-serial-core-add-support-for-boot-console-with-arbitr.patch b/target/linux/ar71xx/patches-4.1/821-serial-core-add-support-for-boot-console-with-arbitr.patch
new file mode 100644
index 0000000000..79150f63c2
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.1/821-serial-core-add-support-for-boot-console-with-arbitr.patch
@@ -0,0 +1,76 @@
+From 4d3c17975c7814884a721fe693b3adf5c426d759 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Tue, 10 Nov 2015 22:18:39 +0100
+Subject: [RFC] serial: core: add support for boot console with arbitrary
+ baud rates
+
+The Arduino Yun uses a baud rate of 250000 by default. The serial is
+going over the Atmel ATmega and is used to connect to this chip.
+Without this patch Linux wants to switch the console to 230400 Baud.
+
+With this patch Linux will use the configured baud rate and not some
+standard one which is near by.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/tty/serial/serial_core.c | 13 ++++++++++---
+ include/linux/console.h | 1 +
+ 2 files changed, 11 insertions(+), 3 deletions(-)
+
+--- a/drivers/tty/serial/serial_core.c
++++ b/drivers/tty/serial/serial_core.c
+@@ -164,6 +164,8 @@ static int uart_port_startup(struct tty_
+ if (retval == 0) {
+ if (uart_console(uport) && uport->cons->cflag) {
+ tty->termios.c_cflag = uport->cons->cflag;
++ tty->termios.c_ospeed = uport->cons->baud;
++ tty->termios.c_ispeed = uport->cons->baud;
+ uport->cons->cflag = 0;
+ }
+ /*
+@@ -1901,7 +1903,7 @@ static const struct baud_rates baud_rate
+ { 4800, B4800 },
+ { 2400, B2400 },
+ { 1200, B1200 },
+- { 0, B38400 }
++ { 0, BOTHER }
+ };
+
+ /**
+@@ -1940,10 +1942,13 @@ uart_set_options(struct uart_port *port,
+ * Construct a cflag setting.
+ */
+ for (i = 0; baud_rates[i].rate; i++)
+- if (baud_rates[i].rate <= baud)
++ if (baud_rates[i].rate == baud)
+ break;
+
+ termios.c_cflag |= baud_rates[i].cflag;
++ if (!baud_rates[i].rate) {
++ termios.c_ospeed = baud;
++ }
+
+ if (bits == 7)
+ termios.c_cflag |= CS7;
+@@ -1973,8 +1978,10 @@ uart_set_options(struct uart_port *port,
+ * Allow the setting of the UART parameters with a NULL console
+ * too:
+ */
+- if (co)
++ if (co) {
+ co->cflag = termios.c_cflag;
++ co->baud = baud;
++ }
+
+ return 0;
+ }
+--- a/include/linux/console.h
++++ b/include/linux/console.h
+@@ -127,6 +127,7 @@ struct console {
+ short flags;
+ short index;
+ int cflag;
++ int baud;
+ void *data;
+ struct console *next;
+ };