aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch')
-rw-r--r--target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch37
1 files changed, 37 insertions, 0 deletions
diff --git a/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch b/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch
new file mode 100644
index 0000000000..46657940b8
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch
@@ -0,0 +1,37 @@
+From 3a7853f0dd24e81dc920c98a5c7e8cfdde81bb45 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 16 Jan 2014 16:58:58 +0100
+Subject: [PATCH] spi-ath79: fix initial GPIO CS line setup
+
+The 'ath79_spi_setup_cs' function initializes the chip
+select line of a given SPI device in order to make sure
+that the device is inactive.
+
+If the SPI_CS_HIGH bit is set for a given device, it
+means that the CS line of that device is active HIGH
+so it must be set to LOW initially. In case of GPIO
+CS lines, the 'ath79_spi_setup_cs' function does the
+opposite of that due to the wrong GPIO flags.
+
+Fix the code to use the correct GPIO flags.
+
+Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -132,9 +132,9 @@ static int ath79_spi_setup_cs(struct spi
+
+ flags = GPIOF_DIR_OUT;
+ if (spi->mode & SPI_CS_HIGH)
+- flags |= GPIOF_INIT_HIGH;
+- else
+ flags |= GPIOF_INIT_LOW;
++ else
++ flags |= GPIOF_INIT_HIGH;
+
+ status = gpio_request_one(cdata->gpio, flags,
+ dev_name(&spi->dev));