diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c')
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c | 164 |
1 files changed, 0 insertions, 164 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c deleted file mode 100644 index 912e9b2a6f..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Cisco Meraki Z1 board support - * - * Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com> - * Copyright (C) 2016 Christian Lamparter <chunkeey@googlemail.com> - * - * Based on Cisco Meraki GPL Release r23-20150601 Z1 Device Config - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <linux/platform/ar934x_nfc.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include <linux/leds-nu801.h> -#include <linux/firmware.h> -#include <linux/pci.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "dev-ap9x-pci.h" -#include "machtypes.h" - -#define Z1_GPIO_LED_POWER_ORANGE 17 - -#define Z1_GPIO_NU801_CKI 14 -#define Z1_GPIO_NU801_SDI 15 - -#define Z1_GPIO_XLNA0 18 -#define Z1_GPIO_XLNA1 19 - -#define Z1_GPIO_BTN_RESET 12 -#define Z1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define Z1_KEYS_DEBOUNCE_INTERVAL (3 * Z1_KEYS_POLL_INTERVAL) - -#define Z1_ETH_SWITCH_PHY 0 - -static struct gpio_led Z1_leds_gpio[] __initdata = { - { - .name = "z1:orange:power", - .gpio = Z1_GPIO_LED_POWER_ORANGE, - .active_low = 1, - }, -}; - -static struct gpio_keys_button Z1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = Z1_KEYS_DEBOUNCE_INTERVAL, - .gpio = Z1_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct led_nu801_template tricolor_led_template = { - .device_name = "z1", - .name = "tricolor", - .num_leds = 1, - .cki = Z1_GPIO_NU801_CKI, - .sdi = Z1_GPIO_NU801_SDI, - .lei = -1, - .ndelay = 500, - .init_brightness = { - LED_OFF, - LED_OFF, - LED_OFF, - }, - .default_trigger = "none", -}; - -static struct led_nu801_platform_data tricolor_led_data = { - .num_controllers = 1, - .template = &tricolor_led_template, -}; - -static struct platform_device tricolor_leds = { - .name = "leds-nu801", - .id = -1, - .dev.platform_data = &tricolor_led_data, -}; - -static struct ar8327_pad_cfg z1_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data z1_ar8327_data = { - .pad0_cfg = &z1_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info z1_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = Z1_ETH_SWITCH_PHY, - .platform_data = &z1_ar8327_data, - }, -}; - -static void __init z1_setup(void) -{ - /* NAND */ - ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_SOFT_BCH); - ath79_register_nfc(); - - /* Eth Config */ - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE); - - /* MDIO Interface */ - ath79_register_mdio(1, 0x0); - ath79_register_mdio(0, 0x0); - mdiobus_register_board_info(z1_mdio0_info, - ARRAY_SIZE(z1_mdio0_info)); - - /* GMAC0 is connected to an AR8327 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(Z1_ETH_SWITCH_PHY); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); - - /* XLNA */ - ath79_wmac_set_ext_lna_gpio(0, Z1_GPIO_XLNA0); - ath79_wmac_set_ext_lna_gpio(1, Z1_GPIO_XLNA1); - - /* LEDs and Buttons */ - platform_device_register(&tricolor_leds); - ath79_register_leds_gpio(-1, ARRAY_SIZE(Z1_leds_gpio), - Z1_leds_gpio); - ath79_register_gpio_keys_polled(-1, Z1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(Z1_gpio_keys), - Z1_gpio_keys); - - /* USB */ - ath79_register_usb(); - - /* Wireless */ - ath79_register_wmac_simple(); - ap91_pci_init_simple(); -} -MIPS_MACHINE(ATH79_MACH_Z1, "Z1", "Meraki Z1", z1_setup); |