1 files changed, 0 insertions, 132 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c
deleted file mode 100644
index 1c74fed98e..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *  TP-LINK TL-WA830RE v2 board support
- *
- *  Copyright (C) 2014 Fredrik Jonson <fredrik@famjonson.se>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WA830REV2_GPIO_LED_WLAN	13
-#define TL_WA830REV2_GPIO_LED_QSS	15
-#define TL_WA830REV2_GPIO_LED_LAN	18
-#define TL_WA830REV2_GPIO_LED_SYSTEM	14
-
-#define TL_WA830REV2_GPIO_BTN_RESET	17
-#define TL_WA830REV2_GPIO_SW_RFKILL	16	/* WPS for MR3420 v2 */
-
-#define TL_WA830REV2_GPIO_USB_POWER	4
-
-#define TL_WA830REV2_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA830REV2_KEYS_POLL_INTERVAL)
-
-static const char *tl_wa830re_v2_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data tl_wa830re_v2_flash_data = {
-	.part_probes	= tl_wa830re_v2_part_probes,
-};
-
-static struct gpio_led tl_wa830re_v2_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:green:qss",
-		.gpio		= TL_WA830REV2_GPIO_LED_QSS,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:system",
-		.gpio		= TL_WA830REV2_GPIO_LED_SYSTEM,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:lan",
-		.gpio		= TL_WA830REV2_GPIO_LED_LAN,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:wlan",
-		.gpio		= TL_WA830REV2_GPIO_LED_WLAN,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_button tl_wa830re_v2_gpio_keys[] __initdata = {
-	{
-		.desc		= "Reset button",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WA830REV2_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "RFKILL switch",
-		.type		= EV_SW,
-		.code		= KEY_RFKILL,
-		.debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WA830REV2_GPIO_SW_RFKILL,
-		.active_low	= 0,
-	}
-};
-
-static void __init tl_ap123_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	/* Disable JTAG, enabling GPIOs 0-3 */
-	/* Configure OBS4 line, for GPIO 4*/
-	ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
-				 AR934X_GPIO_FUNC_CLK_OBS4_EN);
-
-	/* config gpio4 as normal gpio function */
-	ath79_gpio_output_select(TL_WA830REV2_GPIO_USB_POWER,
-				 AR934X_GPIO_OUT_GPIO);
-
-	ath79_register_m25p80(&tl_wa830re_v2_flash_data);
-
-	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-
-	ath79_register_mdio(1, 0x0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
-	/* GMAC0 is connected to the PHY0 of the internal switch */
-	ath79_switch_data.phy4_mii_en = 1;
-	ath79_switch_data.phy_poll_mask = BIT(0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.phy_mask = BIT(0);
-	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-	ath79_register_eth(0);
-
-	ath79_register_wmac(ee, mac);
-}
-
-static void __init tl_wa830re_v2_setup(void)
-{
-	tl_ap123_setup();
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa830re_v2_leds_gpio) - 1,
-				 tl_wa830re_v2_leds_gpio);
-
-	ath79_register_gpio_keys_polled(1, TL_WA830REV2_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tl_wa830re_v2_gpio_keys),
-					tl_wa830re_v2_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA830RE_V2, "TL-WA830RE-v2", "TP-LINK TL-WA830RE v2",
-	     tl_wa830re_v2_setup);