diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c')
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c | 187 |
1 files changed, 0 insertions, 187 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c deleted file mode 100644 index 72d46c0c47..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Support for YunCore SR3200 and XD3200 boards - * - * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/ar8216_platform.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define SR3200_XD3200_GPIO_LED_SYSTEM 1 -#define SR3200_XD3200_GPIO_LED_WLAN2G 19 - -#define SR3200_XD3200_GPIO_BTN_RESET 2 - -#define SR3200_XD3200_KEYS_POLL_INTERVAL 20 -#define SR3200_XD3200_KEYS_DEBOUNCE_INTERVAL \ - (3 * SR3200_XD3200_KEYS_POLL_INTERVAL) - -static struct gpio_led xd3200_leds_gpio[] __initdata = { - { - .name = "xd3200:green:system", - .gpio = SR3200_XD3200_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "xd3200:blue:wlan2g", - .gpio = SR3200_XD3200_GPIO_LED_WLAN2G, - .active_low = 1, - }, -}; - -static struct gpio_led sr3200_leds_gpio[] __initdata = { - { - .name = "sr3200:green:system", - .gpio = SR3200_XD3200_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "sr3200:green:wlan2g", - .gpio = SR3200_XD3200_GPIO_LED_WLAN2G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button sr3200_xd3200_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = SR3200_XD3200_KEYS_DEBOUNCE_INTERVAL, - .gpio = SR3200_XD3200_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static const struct ar8327_led_info sr3200_leds_qca833x[] = { - AR8327_LED_INFO(PHY0_0, HW, "sr3200:green:lan1"), - AR8327_LED_INFO(PHY1_0, HW, "sr3200:green:lan2"), - AR8327_LED_INFO(PHY2_0, HW, "sr3200:green:lan3"), - AR8327_LED_INFO(PHY3_0, HW, "sr3200:green:lan4"), - AR8327_LED_INFO(PHY4_0, HW, "sr3200:green:wan"), -}; - -static const struct ar8327_led_info xd3200_leds_qca833x[] = { - AR8327_LED_INFO(PHY1_0, HW, "xd3200:green:lan"), - AR8327_LED_INFO(PHY2_0, HW, "xd3200:green:wan"), -}; - -/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */ -static struct ar8327_led_cfg sr3200_xd3200_qca833x_led_cfg = { - .led_ctrl0 = 0xcf37cf37, - .led_ctrl1 = 0xcf37cf37, - .led_ctrl2 = 0xcf37cf37, - .led_ctrl3 = 0x0, - .open_drain = true, -}; - -static struct ar8327_pad_cfg sr3200_xd3200_qca833x_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data sr3200_xd3200_qca833x_data = { - .pad0_cfg = &sr3200_xd3200_qca833x_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &sr3200_xd3200_qca833x_led_cfg, -}; - -static struct mdio_board_info sr3200_xd3200_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &sr3200_xd3200_qca833x_data, - }, -}; - -static void __init sr3200_xd3200_common_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_mdio(0, 0x0); - mdiobus_register_board_info(sr3200_xd3200_mdio0_info, - ARRAY_SIZE(sr3200_xd3200_mdio0_info)); - - /* GMAC0 is connected to QCA8334/QCA8337N switch */ - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); - - ath79_register_wmac(mac + 0x1000, NULL); - - ap91_pci_init(mac + 0x5000, NULL); - - ath79_gpio_direction_select(SR3200_XD3200_GPIO_LED_SYSTEM, true); - ath79_gpio_direction_select(SR3200_XD3200_GPIO_LED_WLAN2G, true); - - /* Mute LEDs on boot */ - gpio_set_value(SR3200_XD3200_GPIO_LED_SYSTEM, 1); - gpio_set_value(SR3200_XD3200_GPIO_LED_WLAN2G, 1); - - ath79_gpio_output_select(SR3200_XD3200_GPIO_LED_SYSTEM, 0); - ath79_gpio_output_select(SR3200_XD3200_GPIO_LED_WLAN2G, 0); - - ath79_register_gpio_keys_polled(-1, SR3200_XD3200_KEYS_POLL_INTERVAL, - ARRAY_SIZE(sr3200_xd3200_gpio_keys), - sr3200_xd3200_gpio_keys); -} - -static void __init sr3200_setup(void) -{ - sr3200_xd3200_qca833x_data.leds = sr3200_leds_qca833x; - sr3200_xd3200_qca833x_data.num_leds = ARRAY_SIZE(sr3200_leds_qca833x); - - sr3200_xd3200_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(sr3200_leds_gpio), - sr3200_leds_gpio); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_SR3200, "SR3200", "YunCore SR3200", sr3200_setup); - -static void __init xd3200_setup(void) -{ - sr3200_xd3200_qca833x_data.leds = xd3200_leds_qca833x; - sr3200_xd3200_qca833x_data.num_leds = ARRAY_SIZE(xd3200_leds_qca833x); - - sr3200_xd3200_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(xd3200_leds_gpio), - xd3200_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_XD3200, "XD3200", "YunCore XD3200", xd3200_setup); |