diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c')
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c | 132 |
1 files changed, 0 insertions, 132 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c deleted file mode 100644 index 6dd81ecd5a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Abicom International Scorpion SC300M Module support. - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2017 Conor O'Gorman <i@conorogorman.net> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define SC300M_GPIO_LED_WLAN 0 -#define SC300M_GPIO_LED_POWER 1 - -#define SC300M_GPIO_BTN_RESET 17 - -#define SC300M_KEYS_POLL_INTERVAL 20 /* msecs */ -#define SC300M_KEYS_DEBOUNCE_INTERVAL (3 * SC300M_KEYS_POLL_INTERVAL) - -#define SC300M_MAC0_OFFSET 0 -#define SC300M_MAC1_OFFSET 6 -#define SC300M_WMAC_CALDATA_OFFSET 0x1000 -#define SC300M_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led sc300m_leds_gpio[] __initdata = { - { - .name = "sc300m:blue:wlan", - .gpio = SC300M_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "sc300m:blue:power", - .gpio = SC300M_GPIO_LED_POWER, - .active_low = 1, - } -}; - -static struct gpio_keys_button sc300m_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = SC300M_KEYS_DEBOUNCE_INTERVAL, - .gpio = SC300M_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct at803x_platform_data at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 0, - .enable_rgmii_tx_delay = 0, -}; - -static struct mdio_board_info sc300m_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 1, - .platform_data = &at803x_data, - }, -}; - -static void __init sc300m_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(sc300m_leds_gpio), - sc300m_leds_gpio); - ath79_register_gpio_keys_polled(-1, SC300M_KEYS_POLL_INTERVAL, - ARRAY_SIZE(sc300m_gpio_keys), - sc300m_gpio_keys); - - ath79_register_usb(); - ath79_register_nfc(); - - ath79_register_wmac(art + SC300M_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_mdio(0, 0); - mdiobus_register_board_info(sc300m_mdio0_info, - ARRAY_SIZE(sc300m_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + SC300M_MAC0_OFFSET, 0); - - ath79_eth0_pll_data.pll_1000 = 0xa6000101; - ath79_eth0_pll_data.pll_100 = 0xa4000101; - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = 0xF; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(1); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_SC300M, "SC300M", "Abicom SC300M", sc300m_setup); |