diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c')
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c | 215 |
1 files changed, 0 insertions, 215 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c deleted file mode 100644 index f72700138f..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * OpenMesh OM5P-ACv2 support - * - * Copyright (C) 2013 Marek Lindner <marek@open-mesh.com> - * Copyright (C) 2014-2016 Sven Eckelmann <sven@open-mesh.com> - * Copyright (C) 2015 Open-Mesh - Jim Collar <jim.collar@eqware.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define OM5PACV2_GPIO_LED_POWER 14 -#define OM5PACV2_GPIO_LED_GREEN 13 -#define OM5PACV2_GPIO_LED_RED 23 -#define OM5PACV2_GPIO_LED_YELLOW 15 -#define OM5PACV2_GPIO_BTN_RESET 1 -#define OM5PACV2_GPIO_I2C_SCL 18 -#define OM5PACV2_GPIO_I2C_SDA 19 -#define OM5PACV2_GPIO_PA_DCDC 2 -#define OM5PACV2_GPIO_PA_HIGH 16 - -#define OM5PACV2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define OM5PACV2_KEYS_DEBOUNCE_INTERVAL (3 * OM5PACV2_KEYS_POLL_INTERVAL) - -#define OM5PACV2_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led om5pacv2_leds_gpio[] __initdata = { - { - .name = "om5pac:blue:power", - .gpio = OM5PACV2_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "om5pac:red:wifi", - .gpio = OM5PACV2_GPIO_LED_RED, - .active_low = 1, - }, { - .name = "om5pac:yellow:wifi", - .gpio = OM5PACV2_GPIO_LED_YELLOW, - .active_low = 1, - }, { - .name = "om5pac:green:wifi", - .gpio = OM5PACV2_GPIO_LED_GREEN, - .active_low = 1, - } -}; - -static struct gpio_keys_button om5pacv2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = OM5PACV2_KEYS_DEBOUNCE_INTERVAL, - .gpio = OM5PACV2_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct i2c_gpio_platform_data om5pacv2_i2c_device_platdata = { - .sda_pin = OM5PACV2_GPIO_I2C_SDA, - .scl_pin = OM5PACV2_GPIO_I2C_SCL, - .udelay = 10, - .sda_is_open_drain = 1, - .scl_is_open_drain = 1, -}; - -static struct platform_device om5pacv2_i2c_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &om5pacv2_i2c_device_platdata, - }, -}; - -static struct i2c_board_info om5pacv2_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("tmp423", 0x4e), - }, -}; - -static struct flash_platform_data om5pacv2_flash_data = { - .type = "mx25l12805d", -}; - -static struct at803x_platform_data om5pacv2_an_at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 1, -}; - -static struct at803x_platform_data om5pacv2_an_at8031_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 1, -}; - -static struct mdio_board_info om5pacv2_an_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 4, - .platform_data = &om5pacv2_an_at803x_data, - }, - { - .bus_id = "ag71xx-mdio.1", - .mdio_addr = 1, - .platform_data = &om5pacv2_an_at8031_data, - }, -}; - -static void __init om5p_acv2_setup_qca955x_eth_cfg(u32 mask, - unsigned int rxd, - unsigned int rxdv, - unsigned int txd, - unsigned int txe) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = mask; - t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT; - t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT; - t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT; - t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -static void __init om5p_acv2_setup(void) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); - u8 mac[6]; - - /* power amplifier high power, 4.2V at RFFM4203/4503 instead of 3.3 */ - ath79_gpio_function_enable(QCA955X_GPIO_FUNC_JTAG_DISABLE); - ath79_gpio_output_select(OM5PACV2_GPIO_PA_DCDC, QCA955X_GPIO_OUT_GPIO); - ath79_gpio_output_select(OM5PACV2_GPIO_PA_HIGH, QCA955X_GPIO_OUT_GPIO); - gpio_request_one(OM5PACV2_GPIO_PA_DCDC, GPIOF_OUT_INIT_HIGH, - "PA DC/DC"); - gpio_request_one(OM5PACV2_GPIO_PA_HIGH, GPIOF_OUT_INIT_HIGH, "PA HIGH"); - - /* temperature sensor */ - platform_device_register(&om5pacv2_i2c_device); - i2c_register_board_info(0, om5pacv2_i2c_devs, - ARRAY_SIZE(om5pacv2_i2c_devs)); - - ath79_register_m25p80(&om5pacv2_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(om5pacv2_leds_gpio), - om5pacv2_leds_gpio); - ath79_register_gpio_keys_polled(-1, OM5PACV2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(om5pacv2_gpio_keys), - om5pacv2_gpio_keys); - - ath79_init_mac(mac, art, 0x02); - ath79_register_wmac(art + OM5PACV2_WMAC_CALDATA_OFFSET, mac); - - om5p_acv2_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 2, 2, 0, 0); - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - - mdiobus_register_board_info(om5pacv2_an_mdio0_info, - ARRAY_SIZE(om5pacv2_an_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00); - ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01); - - /* GMAC0 is connected to the PHY4 */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_pll_data.pll_1000 = 0x82000101; - ath79_eth0_pll_data.pll_100 = 0x80000101; - ath79_eth0_pll_data.pll_10 = 0x80001313; - ath79_register_eth(0); - - /* GMAC1 is connected to MDIO1 in SGMII mode */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_eth1_data.phy_mask = BIT(1); - ath79_eth1_pll_data.pll_1000 = 0x03000101; - ath79_eth1_pll_data.pll_100 = 0x80000101; - ath79_eth1_pll_data.pll_10 = 0x80001313; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_register_eth(1); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_OM5P_ACv2, "OM5P-ACv2", "OpenMesh OM5P ACv2", om5p_acv2_setup); |