diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c')
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c | 158 |
1 files changed, 0 insertions, 158 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c deleted file mode 100644 index de24db4d4b..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * jjPlus JWAP230 board support - * - * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com> - * - * Based on mach-wpj558.c and mach-tl-wr1043nd-v2.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define JWAP230_GPIO_LED_LED1 23 -#define JWAP230_GPIO_LED_LED2 22 -#define JWAP230_GPIO_LED_LED3 21 - -#define JWAP230_MAC0_OFFSET 0x0 -#define JWAP230_MAC1_OFFSET 0x6 -#define JWAP230_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led jwap230_leds_gpio[] __initdata = { - { - .name = "jwap230:green:led1", - .gpio = JWAP230_GPIO_LED_LED1, - .active_low = 1, - }, - { - .name = "jwap230:green:led2", - .gpio = JWAP230_GPIO_LED_LED2, - .active_low = 1, - }, - { - .name = "jwap230:green:led3", - .gpio = JWAP230_GPIO_LED_LED3, - .active_low = 1, - } -}; - -static const struct ar8327_led_info jwap230_leds_qca8337[] = { - AR8327_LED_INFO(PHY0_0, HW, "jwap230:green:lan"), - AR8327_LED_INFO(PHY4_0, HW, "jwap230:green:wan"), -}; - -/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */ -static struct ar8327_led_cfg jwap230_qca8337_led_cfg = { - .led_ctrl0 = 0xcf37cf37, - .led_ctrl1 = 0xcf37cf37, - .led_ctrl2 = 0xcf37cf37, - .led_ctrl3 = 0x0, - .open_drain = true, -}; - -/* QCA8337 GMAC0 is connected with QCA9558 over RGMII */ -static struct ar8327_pad_cfg jwap230_qca8337_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, - .mac06_exchange_dis = true, -}; - -/* QCA8337 GMAC6 is connected with QCA9558 over SGMII */ -static struct ar8327_pad_cfg jwap230_qca8337_pad6_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, -}; - -static struct ar8327_platform_data jwap230_qca8337_data = { - .pad0_cfg = &jwap230_qca8337_pad0_cfg, - .pad6_cfg = &jwap230_qca8337_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &jwap230_qca8337_led_cfg, - .num_leds = ARRAY_SIZE(jwap230_leds_qca8337), - .leds = jwap230_leds_qca8337, -}; - -static struct mdio_board_info jwap230_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &jwap230_qca8337_data, - }, -}; - -static void __init jwap230_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(jwap230_leds_gpio), - jwap230_leds_gpio); - - mdiobus_register_board_info(jwap230_mdio0_info, - ARRAY_SIZE(jwap230_mdio0_info)); - ath79_register_mdio(0, 0x0); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - /* QCA9558 GMAC0 is connected to RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0xa6000000; - - ath79_init_mac(ath79_eth0_data.mac_addr, art + JWAP230_MAC0_OFFSET, 0); - ath79_register_eth(0); - - /* QCA9558 GMAC1 is connected to SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_init_mac(ath79_eth1_data.mac_addr, art + JWAP230_MAC1_OFFSET, 0); - ath79_register_eth(1); - - ath79_register_wmac(art + JWAP230_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_pci(); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_JWAP230, "JWAP230", "jjPlus JWAP230", jwap230_setup); |