diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c')
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c | 132 |
1 files changed, 132 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c new file mode 100644 index 0000000000..43af71a0a8 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c @@ -0,0 +1,132 @@ +/* + * AVM FRITZ!WLAN Repeater 300E board support + * + * Copyright (C) 2017 Mathias Kresin <dev@kresin.me> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" + +#define FRITZ300E_KEYS_POLL_INTERVAL 20 /* msecs */ +#define FRITZ300E_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ300E_KEYS_POLL_INTERVAL) + +static struct mtd_partition fritz300e_flash_partitions[] = { + { + .name = "urloader", + .offset = 0, + .size = 0x0020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x0020000, + .size = 0x0ee0000, + }, { + .name = "tffs (1)", + .offset = 0x0f00000, + .size = 0x0080000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "tffs (2)", + .offset = 0x0f80000, + .size = 0x0080000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct flash_platform_data fritz300e_flash_data = { + .parts = fritz300e_flash_partitions, + .nr_parts = ARRAY_SIZE(fritz300e_flash_partitions), +}; + +static struct gpio_led fritz300e_leds_gpio[] __initdata = { + { + .name = "fritz300e:green:power", + .gpio = 13, + .active_low = 1, + }, { + .name = "fritz300e:green:lan", + .gpio = 15, + .active_low = 1, + }, { + .name = "fritz300e:green:wlan", + .gpio = 16, + .active_low = 1, + } +}; + +static struct gpio_led fritz300e_wmac_leds_gpio[] = { + { + .name = "fritz300e:green:rssi0", + .gpio = 10, + .active_low = 1, + }, { + .name = "fritz300e:green:rssi1", + .gpio = 4, + .active_low = 1, + }, { + .name = "fritz300e:green:rssi2", + .gpio = 6, + .active_low = 1, + }, { + .name = "fritz300e:green:rssi3", + .gpio = 7, + .active_low = 1, + }, { + .name = "fritz300e:green:rssi4", + .gpio = 5, + .active_low = 1, + } +}; + +static struct gpio_keys_button fritz300e_gpio_keys[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = FRITZ300E_KEYS_DEBOUNCE_INTERVAL, + .gpio = 12, + .active_low = 1, + }, +}; + +static void __init fritz300e_setup(void) +{ + /* get the Lantiq PEF7071V phy out of reset */ + gpio_request_one(11, GPIOF_OUT_INIT_HIGH, "phy reset"); + + ath79_register_m25p80(&fritz300e_flash_data); + + ath79_register_mdio(0, ~(BIT(0))); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(0); + + ath79_register_eth(0); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz300e_leds_gpio), + fritz300e_leds_gpio); + ath79_register_gpio_keys_polled(-1, FRITZ300E_KEYS_POLL_INTERVAL, + ARRAY_SIZE(fritz300e_gpio_keys), + fritz300e_gpio_keys); + + ap9x_pci_setup_wmac_leds(0, fritz300e_wmac_leds_gpio, + ARRAY_SIZE(fritz300e_wmac_leds_gpio)); + ap91_pci_init_simple(); +} + +MIPS_MACHINE(ATH79_MACH_FRITZ300E, "FRITZ300E", + "AVM FRITZ!WLAN Repeater 300E", fritz300e_setup); |