diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c')
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c | 191 |
1 files changed, 0 insertions, 191 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c deleted file mode 100644 index 2577dbffae..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * D-Link DAP-2695 rev. A1 support - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2016 Stijn Tintel <stijn@linux-ipv6.be> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define DAP2695_GPIO_LED_GREEN_POWER 23 -#define DAP2695_GPIO_LED_RED_POWER 14 -#define DAP2695_GPIO_LED_WLAN_2G 13 - -#define DAP2695_GPIO_BTN_RESET 17 - -#define DAP2695_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DAP2695_KEYS_DEBOUNCE_INTERVAL (3 * DAP2695_KEYS_POLL_INTERVAL) - -#define DAP2695_NVRAM_ADDR 0x1f040000 -#define DAP2695_NVRAM_SIZE 0x10000 - -#define DAP2695_MAC0_OFFSET 1 -#define DAP2695_MAC1_OFFSET 2 -#define DAP2695_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led dap2695_leds_gpio[] __initdata = { - { - .name = "d-link:green:power", - .gpio = DAP2695_GPIO_LED_GREEN_POWER, - .active_low = 1, - }, - { - .name = "d-link:red:power", - .gpio = DAP2695_GPIO_LED_RED_POWER, - .active_low = 1, - }, - { - .name = "d-link:green:wlan2g", - .gpio = DAP2695_GPIO_LED_WLAN_2G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button dap2695_gpio_keys[] __initdata = { - { - .desc = "Soft reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DAP2695_KEYS_DEBOUNCE_INTERVAL, - .gpio = DAP2695_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg dap2695_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, - .mac06_exchange_dis = true, -}; - -static struct ar8327_pad_cfg dap2695_ar8327_pad6_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data dap2695_ar8327_data = { - .pad0_cfg = &dap2695_ar8327_pad0_cfg, - .pad6_cfg = &dap2695_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info dap2695_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &dap2695_ar8327_data, - }, -}; - -static struct flash_platform_data dap2695_flash_data = { - .type = "mx25l12805d", -}; - -static void dap2695_get_mac(const char *name, char *mac) -{ - u8 *nvram = (u8 *) KSEG1ADDR(DAP2695_NVRAM_ADDR); - int err; - - err = ath79_nvram_parse_mac_addr(nvram, DAP2695_NVRAM_SIZE, - name, mac); - if (err) - pr_err("no MAC address found for %s\n", name); -} - -static void __init dap2695_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 mac0[ETH_ALEN], mac1[ETH_ALEN], wmac0[ETH_ALEN]; - - dap2695_get_mac("lanmac=", mac0); - dap2695_get_mac("wanmac=", mac1); - dap2695_get_mac("wlanmac=", wmac0); - - ath79_register_m25p80(&dap2695_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dap2695_leds_gpio), - dap2695_leds_gpio); - ath79_register_gpio_keys_polled(-1, DAP2695_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dap2695_gpio_keys), - dap2695_gpio_keys); - - ath79_register_wmac(art + DAP2695_WMAC_CALDATA_OFFSET, wmac0); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(dap2695_mdio0_info, - ARRAY_SIZE(dap2695_mdio0_info)); - - /* GMAC0 is connected to the RGMII interface */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac0, DAP2695_MAC0_OFFSET); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x56000000; - - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_init_mac(ath79_eth1_data.mac_addr, mac1, DAP2695_MAC1_OFFSET); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_register_eth(1); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_DAP_2695_A1, "DAP-2695-A1", - "D-Link DAP-2695 rev. A1", - dap2695_setup); |