diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c')
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c | 181 |
1 files changed, 0 insertions, 181 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c deleted file mode 100644 index 084a4e4cc0..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * OpenMesh A60 support - * - * Copyright (C) 2013 Marek Lindner <marek@open-mesh.com> - * Copyright (C) 2014-2017 Sven Eckelmann <sven@open-mesh.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-gpio-buttons.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" -#include "dev-usb.h" - -#define A60_GPIO_LED_RED 22 -#define A60_GPIO_LED_GREEN 23 -#define A60_GPIO_LED_BLUE 13 - -#define A60_GPIO_BTN_RESET 17 - -#define A60_KEYS_POLL_INTERVAL 20 /* msecs */ -#define A60_KEYS_DEBOUNCE_INTERVAL (3 * A60_KEYS_POLL_INTERVAL) - -#define A60_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led a40_leds_gpio[] __initdata = { - { - .name = "a40:red:status", - .gpio = A60_GPIO_LED_RED, - }, { - .name = "a40:green:status", - .gpio = A60_GPIO_LED_GREEN, - }, { - .name = "a40:blue:status", - .gpio = A60_GPIO_LED_BLUE, - } -}; - -static struct gpio_led a60_leds_gpio[] __initdata = { - { - .name = "a60:red:status", - .gpio = A60_GPIO_LED_RED, - }, { - .name = "a60:green:status", - .gpio = A60_GPIO_LED_GREEN, - }, { - .name = "a60:blue:status", - .gpio = A60_GPIO_LED_BLUE, - } -}; - -static struct gpio_keys_button a60_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = A60_KEYS_DEBOUNCE_INTERVAL, - .gpio = A60_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct at803x_platform_data a60_at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 1, -}; - -static struct mdio_board_info a60_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 1, - .platform_data = &a60_at803x_data, - }, - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 2, - .platform_data = &a60_at803x_data, - }, -}; - -static void __init a60_setup_qca955x_eth_cfg(u32 mask, - unsigned int rxd, - unsigned int rxdv, - unsigned int txd, - unsigned int txe) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = mask; - t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT; - t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT; - t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT; - t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -static void __init a60_setup_common(void) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); - u8 mac[6]; - - ath79_register_usb(); - - ath79_register_m25p80(NULL); - ath79_register_gpio_keys_polled(-1, A60_KEYS_POLL_INTERVAL, - ARRAY_SIZE(a60_gpio_keys), - a60_gpio_keys); - - ath79_init_mac(mac, art, 0x02); - ath79_register_wmac(art + A60_WMAC_CALDATA_OFFSET, mac); - - a60_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0); - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(a60_mdio0_info, ARRAY_SIZE(a60_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00); - ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01); - - /* GMAC0 is connected to the PHY1 */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = BIT(1); - ath79_eth0_pll_data.pll_1000 = 0x82000101; - ath79_eth0_pll_data.pll_100 = 0x80000101; - ath79_eth0_pll_data.pll_10 = 0x80001313; - ath79_register_eth(0); - - /* GMAC1 is connected to MDIO1 in SGMII mode */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth1_data.phy_mask = BIT(2); - ath79_eth1_pll_data.pll_1000 = 0x03000101; - ath79_eth1_pll_data.pll_100 = 0x80000101; - ath79_eth1_pll_data.pll_10 = 0x80001313; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_register_eth(1); - - ath79_register_pci(); -} - -static void __init a40_setup(void) -{ - ath79_register_leds_gpio(-1, ARRAY_SIZE(a40_leds_gpio), a40_leds_gpio); - a60_setup_common(); -} - -MIPS_MACHINE(ATH79_MACH_A40, "A40", "OpenMesh A40", a40_setup); - -static void __init a60_setup(void) -{ - ath79_register_leds_gpio(-1, ARRAY_SIZE(a60_leds_gpio), a60_leds_gpio); - a60_setup_common(); -} - -MIPS_MACHINE(ATH79_MACH_A60, "A60", "OpenMesh A60", a60_setup); |