aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch')
-rw-r--r--target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch328
1 files changed, 0 insertions, 328 deletions
diff --git a/target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch b/target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch
deleted file mode 100644
index 4e53fdfa21..0000000000
--- a/target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch
+++ /dev/null
@@ -1,328 +0,0 @@
-From b1c54da602ae9215cfbde1c3ed3b6296b76f07fc Mon Sep 17 00:00:00 2001
-Message-Id: <b1c54da602ae9215cfbde1c3ed3b6296b76f07fc.1486337989.git.chunkeey@googlemail.com>
-In-Reply-To: <246bd6614529d28dc48b11981ab5dae7a7364fc2.1486337989.git.chunkeey@googlemail.com>
-References: <246bd6614529d28dc48b11981ab5dae7a7364fc2.1486337989.git.chunkeey@googlemail.com>
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Mon, 13 Jun 2016 15:42:21 +0200
-Subject: [RFC 2/2] net: emac: add support for device-tree based PHY discovery
- and setup
-To: netdev@vger.kernel.org,
- devicetree@vger.kernel.org
-Cc: David S. Miller <davem@davemloft.net>,
- Ivan Mikhaylov <ivan@de.ibm.com>,
- Mark Rutland <mark.rutland@arm.com>,
- Rob Herring <robh+dt@kernel.org>
-
-This patch adds glue-code that allows the EMAC driver to interface
-with the existing dt-supported PHYs in drivers/net/phy.
-
-Because currently, the emac driver maintains a small library of
-supported phys for in a private phy.c file located in the drivers
-directory.
-
-The support is limited to mostly single ethernet transceiver like the:
-CIS8201, BCM5248, ET1011C, Marvell 88E1111 and 88E1112, AR8035.
-However, routers like the Netgear WNDR4700 and Cisco Meraki MX60(W)
-have a 5-port switch (QCA8327N) attached to the MDIO of the EMAC.
-The switch chip has already a proper phy-driver (ar8216) that uses
-the generic phy library.
-
-Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
----
---- a/drivers/net/ethernet/ibm/emac/core.c
-+++ b/drivers/net/ethernet/ibm/emac/core.c
-@@ -42,6 +42,7 @@
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
- #include <linux/of_net.h>
-+#include <linux/of_mdio.h>
- #include <linux/slab.h>
-
- #include <asm/processor.h>
-@@ -2422,6 +2423,229 @@ static int emac_read_uint_prop(struct de
- return 0;
- }
-
-+static void emac_adjust_link(struct net_device *ndev)
-+{
-+ struct emac_instance *dev = netdev_priv(ndev);
-+ struct phy_device *phy = dev->phy_dev;
-+
-+ dev->phy.autoneg = phy->autoneg;
-+ dev->phy.speed = phy->speed;
-+ dev->phy.duplex = phy->duplex;
-+ dev->phy.pause = phy->pause;
-+ dev->phy.asym_pause = phy->asym_pause;
-+ dev->phy.advertising = phy->advertising;
-+}
-+
-+static int emac_mii_bus_read(struct mii_bus *bus, int addr, int regnum)
-+{
-+ return emac_mdio_read(bus->priv, addr, regnum);
-+}
-+
-+static int emac_mii_bus_write(struct mii_bus *bus, int addr, int regnum, u16 val)
-+{
-+ emac_mdio_write(bus->priv, addr, regnum, val);
-+ return 0;
-+}
-+
-+static int emac_mii_bus_reset(struct mii_bus *bus)
-+{
-+ struct emac_instance *dev = netdev_priv(bus->priv);
-+ int err;
-+
-+ err = emac_reset(dev);
-+ if (err)
-+ return err;
-+ /* Meraki MX60(W)'s uboot will disable the switch and
-+ * a bus reset won't do anything. */
-+ emac_mii_reset_phy(&dev->phy);
-+ return 0;
-+}
-+
-+static int emac_mdio_setup_aneg(struct mii_phy *phy, u32 advertise)
-+{
-+ struct net_device *ndev = phy->dev;
-+ struct emac_instance *dev = netdev_priv(ndev);
-+
-+ dev->phy.autoneg = AUTONEG_ENABLE;
-+ dev->phy.speed = SPEED_1000;
-+ dev->phy.duplex = DUPLEX_FULL;
-+ dev->phy.advertising = advertise;
-+ phy->autoneg = AUTONEG_ENABLE;
-+ phy->speed = dev->phy.speed;
-+ phy->duplex = dev->phy.duplex;
-+ phy->advertising = advertise;
-+ return phy_start_aneg(dev->phy_dev);
-+}
-+
-+static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd)
-+{
-+ struct net_device *ndev = phy->dev;
-+ struct emac_instance *dev = netdev_priv(ndev);
-+
-+ dev->phy.autoneg = AUTONEG_DISABLE;
-+ dev->phy.speed = speed;
-+ dev->phy.duplex = fd;
-+ phy->autoneg = AUTONEG_DISABLE;
-+ phy->speed = speed;
-+ phy->duplex = fd;
-+ return phy_start_aneg(dev->phy_dev);
-+}
-+
-+static int emac_mdio_poll_link(struct mii_phy *phy)
-+{
-+ struct net_device *ndev = phy->dev;
-+ struct emac_instance *dev = netdev_priv(ndev);
-+ int res;
-+
-+ res = phy_read_status(dev->phy_dev);
-+ if (res) {
-+ dev_err(&dev->ofdev->dev, "link update failed (%d).", res);
-+ return ethtool_op_get_link(ndev);
-+ }
-+
-+ return dev->phy_dev->link;
-+}
-+
-+static int emac_mdio_read_link(struct mii_phy *phy)
-+{
-+ struct net_device *ndev = phy->dev;
-+ struct emac_instance *dev = netdev_priv(ndev);
-+ int res;
-+
-+ res = phy_read_status(dev->phy_dev);
-+ if (res)
-+ return res;
-+
-+ dev->phy.speed = phy->speed;
-+ dev->phy.duplex = phy->duplex;
-+ dev->phy.pause = phy->pause;
-+ dev->phy.asym_pause = phy->asym_pause;
-+ return 0;
-+}
-+
-+static int emac_mdio_init_phy(struct mii_phy *phy)
-+{
-+ struct net_device *ndev = phy->dev;
-+ struct emac_instance *dev = netdev_priv(ndev);
-+
-+ phy_start(dev->phy_dev);
-+ dev->phy.autoneg = phy->autoneg;
-+ dev->phy.speed = phy->speed;
-+ dev->phy.duplex = phy->duplex;
-+ dev->phy.advertising = phy->advertising;
-+ dev->phy.pause = phy->pause;
-+ dev->phy.asym_pause = phy->asym_pause;
-+
-+ return phy_init_hw(dev->phy_dev);
-+}
-+
-+static const struct mii_phy_ops emac_dt_mdio_phy_ops = {
-+ .init = emac_mdio_init_phy,
-+ .setup_aneg = emac_mdio_setup_aneg,
-+ .setup_forced = emac_mdio_setup_forced,
-+ .poll_link = emac_mdio_poll_link,
-+ .read_link = emac_mdio_read_link,
-+};
-+
-+static int emac_dt_mdio_probe(struct emac_instance *dev)
-+{
-+ struct device_node *mii_np;
-+ int res;
-+
-+ mii_np = of_get_child_by_name(dev->ofdev->dev.of_node, "mdio");
-+ if (!mii_np) {
-+ dev_err(&dev->ofdev->dev, "no mdio definition found.");
-+ return -ENODEV;
-+ }
-+
-+ if (!of_device_is_available(mii_np)) {
-+ res = 1;
-+ goto put_node;
-+ }
-+
-+ dev->mii_bus = devm_mdiobus_alloc(&dev->ofdev->dev);
-+ if (!dev->mii_bus) {
-+ res = -ENOMEM;
-+ goto put_node;
-+ }
-+
-+ dev->mii_bus->priv = dev->ndev;
-+ dev->mii_bus->parent = dev->ndev->dev.parent;
-+ dev->mii_bus->name = "emac_mdio";
-+ dev->mii_bus->read = &emac_mii_bus_read;
-+ dev->mii_bus->write = &emac_mii_bus_write;
-+ dev->mii_bus->reset = &emac_mii_bus_reset;
-+ snprintf(dev->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev->ofdev->name);
-+ res = of_mdiobus_register(dev->mii_bus, mii_np);
-+ if (res) {
-+ dev_err(&dev->ofdev->dev, "cannot register MDIO bus %s (%d)",
-+ dev->mii_bus->name, res);
-+ }
-+
-+ put_node:
-+ of_node_put(mii_np);
-+ return res;
-+}
-+
-+static int emac_dt_phy_probe(struct emac_instance *dev,
-+ struct device_node *phy_handle)
-+{
-+ u32 phy_flags = 0;
-+ int res;
-+
-+ res = of_property_read_u32(phy_handle, "phy-flags", &phy_flags);
-+ if (res < 0 && res != -EINVAL)
-+ return res;
-+
-+ dev->phy.def = devm_kzalloc(&dev->ofdev->dev, sizeof(*dev->phy.def),
-+ GFP_KERNEL);
-+ if (!dev->phy.def)
-+ return -ENOMEM;
-+
-+ dev->phy_dev = of_phy_connect(dev->ndev, phy_handle,
-+ &emac_adjust_link, phy_flags,
-+ PHY_INTERFACE_MODE_RGMII);
-+ if (!dev->phy_dev) {
-+ dev_err(&dev->ofdev->dev, "failed to connect to PHY.\n");
-+ return -ENODEV;
-+ }
-+
-+ dev->phy.def->phy_id = dev->phy_dev->drv->phy_id;
-+ dev->phy.def->phy_id_mask = dev->phy_dev->drv->phy_id_mask;
-+ dev->phy.def->name = dev->phy_dev->drv->name;
-+ dev->phy.def->ops = &emac_dt_mdio_phy_ops;
-+ dev->phy.features = dev->phy_dev->supported;
-+ dev->phy.address = dev->phy_dev->mdio.addr;
-+ dev->phy.mode = dev->phy_dev->interface;
-+ return 0;
-+}
-+
-+static int emac_probe_dt_phy(struct emac_instance *dev)
-+{
-+ struct device_node *np = dev->ofdev->dev.of_node;
-+ struct device_node *phy_handle;
-+ int res = 0;
-+
-+ phy_handle = of_parse_phandle(np, "phy-handle", 0);
-+
-+ if (phy_handle) {
-+ res = emac_dt_mdio_probe(dev);
-+ if (!res) {
-+ res = emac_dt_phy_probe(dev, phy_handle);
-+ if (!res)
-+ res = 1;
-+ else
-+ mdiobus_unregister(dev->mii_bus);
-+ }
-+ }
-+
-+ of_node_put(phy_handle);
-+ /* if no phy device was specified in the device tree, then we fallback
-+ * to the old emac_phy.c probe code for compatibility reasons.
-+ */
-+ return res;
-+}
-+
- static int emac_init_phy(struct emac_instance *dev)
- {
- struct device_node *np = dev->ofdev->dev.of_node;
-@@ -2492,6 +2716,22 @@ static int emac_init_phy(struct emac_ins
-
- emac_configure(dev);
-
-+ if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) {
-+ int res = emac_probe_dt_phy(dev);
-+
-+ if (res == 1) {
-+ mutex_unlock(&emac_phy_map_lock);
-+ goto init_phy;
-+ } else if (res < 0) {
-+ mutex_unlock(&emac_phy_map_lock);
-+ dev_err(&dev->ofdev->dev, "failed to attach dt phy (%d).\n",
-+ res);
-+ return res;
-+ }
-+
-+ /* continue with old code */
-+ }
-+
- if (dev->phy_address != 0xffffffff)
- phy_map = ~(1 << dev->phy_address);
-
-@@ -2519,6 +2759,7 @@ static int emac_init_phy(struct emac_ins
- return -ENXIO;
- }
-
-+ init_phy:
- /* Init PHY */
- if (dev->phy.def->ops->init)
- dev->phy.def->ops->init(&dev->phy);
-@@ -2988,6 +3229,12 @@ static int emac_remove(struct platform_d
- if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
- zmii_detach(dev->zmii_dev, dev->zmii_port);
-
-+ if (dev->phy_dev)
-+ phy_disconnect(dev->phy_dev);
-+
-+ if (dev->mii_bus)
-+ mdiobus_unregister(dev->mii_bus);
-+
- busy_phy_map &= ~(1 << dev->phy.address);
- DBG(dev, "busy_phy_map now %#x" NL, busy_phy_map);
-
---- a/drivers/net/ethernet/ibm/emac/core.h
-+++ b/drivers/net/ethernet/ibm/emac/core.h
-@@ -199,6 +199,10 @@ struct emac_instance {
- struct emac_instance *mdio_instance;
- struct mutex mdio_lock;
-
-+ /* Device-tree based phy configuration */
-+ struct mii_bus *mii_bus;
-+ struct phy_device *phy_dev;
-+
- /* ZMII infos if any */
- u32 zmii_ph;
- u32 zmii_port;
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 20:58:27 +0000