diff options
Diffstat (limited to 'target/linux/apm821xx/dts/wd-mybooklive.dts')
| -rw-r--r-- | target/linux/apm821xx/dts/wd-mybooklive.dts | 183 |
1 files changed, 182 insertions, 1 deletions
diff --git a/target/linux/apm821xx/dts/wd-mybooklive.dts b/target/linux/apm821xx/dts/wd-mybooklive.dts index d841352292..aee0d3266d 100644 --- a/target/linux/apm821xx/dts/wd-mybooklive.dts +++ b/target/linux/apm821xx/dts/wd-mybooklive.dts @@ -9,9 +9,190 @@ /dts-v1/; -#include "apollo3g.dtsi" +#include "apm82181.dtsi" / { compatible = "wd,mybooklive", "amcc,apollo3g"; model = "MyBook Live"; + + aliases { + serial0 = &UART0; + led-boot = &status; + led-failsafe = &status; + led-running = &status; + led-upgrade = &status; + }; +}; + +&POB0 { + ebc { + nor_flash@0,0 { + status = "okay"; + compatible = "amd,s29gl512n", "jedec-probe", "cfi-flash", "mtd-rom"; + bank-width = <1>; + reg = <0x00000000 0x00000000 0x00080000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + /* Part of bootrom - Don't use it without a jump */ + label = "free"; + reg = <0x00000000 0x0001e000>; + }; + + partition@1 { + label = "env"; + reg = <0x0001e000 0x00002000>; + }; + + partition@2 { + label = "uboot"; + reg = <0x00020000 0x00050000>; + }; + }; + }; + + GPIO1: gpio1@e0000000 { + compatible = "wd,mbl-gpio", "ti,74273"; + reg-names = "dat"; + reg = <0xe0000000 0x1>; + #gpio-cells = <2>; + gpio-controller; + + enable-phy { + /* toggle to reset EMAC PHY */ + gpio-hog; + line-name = "enable EMAC PHY"; + gpios = <0 GPIO_ACTIVE_LOW>; + output-low; + }; + + enable-button { + /* Defined in u-boot as: NOT_NOR + * "enables features other than NOR + * specifically, the buffer at CS2" + * (button). + * + * Note: This option is disabled as + * it prevents the system from being + * rebooted successfully. + */ + + gpio-hog; + line-name = "Enable Reset Button, disable NOR"; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + }; + + enable-usb { + gpio-hog; + line-name = "Power USB Core"; + gpios = <2 GPIO_ACTIVE_LOW>; + output-low; + }; + + enable-port1 { + gpio-hog; + line-name = "Power Drive Port 1"; + gpios = <3 GPIO_ACTIVE_LOW>; + output-low; + }; + + enable-port0 { + gpio-hog; + line-name = "Power Drive Port 0"; + gpios = <7 GPIO_ACTIVE_LOW>; + output-low; + }; + }; + + GPIO2: gpio2@e0100000 { + compatible = "wd,mbl-gpio", "ti,74244"; + reg-names = "dat"; + reg = <0xe0100000 0x1>; + #gpio-cells = <2>; + gpio-controller; + no-output; + }; + + gpio-leds { + compatible = "gpio-leds"; + + failsafe: power-red { + label = "mbl:red:power"; + gpios = <&GPIO1 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "panic"; + }; + + status: power-green { + label = "mbl:green:power"; + gpios = <&GPIO1 5 GPIO_ACTIVE_HIGH>; + }; + + power-blue { + label = "mbl:blue:power"; + gpios = <&GPIO1 6 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_keys_polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <60>; /* 3 * 20 = 60ms */ + autorepeat; + + reset-button { + label = "Reset button"; + linux,code = <KEY_RESTART>; + gpios = <&GPIO2 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&EMAC0 { + status = "okay"; + + phy-map = <0x2>; + phy-address = <0x1>; + phy-handle = <&phy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&CRYPTO { + status = "okay"; +}; + +&PKA { + status = "okay"; +}; + +&TRNG { + status = "okay"; +}; + +&SATA0 { + status = "okay"; +}; + +&SATA1 { + status = "okay"; +}; + +&UART0 { + status = "okay"; +}; + +&USBOTG0 { + status = "okay"; + dr_mode = "host"; }; |