diff options
Diffstat (limited to 'package/utils/busybox/config/miscutils/Config.in')
| -rw-r--r-- | package/utils/busybox/config/miscutils/Config.in | 36 |
1 files changed, 7 insertions, 29 deletions
diff --git a/package/utils/busybox/config/miscutils/Config.in b/package/utils/busybox/config/miscutils/Config.in index 6ce6d2d7e3..f3b29787d1 100644 --- a/package/utils/busybox/config/miscutils/Config.in +++ b/package/utils/busybox/config/miscutils/Config.in @@ -9,7 +9,6 @@ menu "Miscellaneous Utilities" config BUSYBOX_CONFIG_ADJTIMEX bool "adjtimex (4.7 kb)" default BUSYBOX_DEFAULT_ADJTIMEX - select BUSYBOX_CONFIG_PLATFORM_LINUX help Adjtimex reads and optionally sets adjustment parameters for the Linux clock adjustment algorithm. @@ -122,7 +121,6 @@ endif config BUSYBOX_CONFIG_BEEP bool "beep (2.4 kb)" default BUSYBOX_DEFAULT_BEEP - select BUSYBOX_CONFIG_PLATFORM_LINUX help The beep applets beeps in a given freq/Hz. @@ -210,7 +208,6 @@ config BUSYBOX_CONFIG_FEATURE_CHAT_CLR_ABORT config BUSYBOX_CONFIG_CONSPY bool "conspy (10 kb)" default BUSYBOX_DEFAULT_CONSPY - select BUSYBOX_CONFIG_PLATFORM_LINUX help A text-mode VNC like program for Linux virtual terminals. example: conspy NUM shared access to console num @@ -276,7 +273,6 @@ config BUSYBOX_CONFIG_CRONTAB config BUSYBOX_CONFIG_DEVFSD bool "devfsd (obsolete)" default BUSYBOX_DEFAULT_DEVFSD - select BUSYBOX_CONFIG_PLATFORM_LINUX select BUSYBOX_CONFIG_FEATURE_SYSLOG help This is deprecated and should NOT be used anymore. @@ -319,7 +315,6 @@ config BUSYBOX_CONFIG_DEVFSD_VERBOSE config BUSYBOX_CONFIG_FEATURE_DEVFS bool "Use devfs names for all devices (obsolete)" default BUSYBOX_DEFAULT_FEATURE_DEVFS - select BUSYBOX_CONFIG_PLATFORM_LINUX help This is obsolete and should NOT be used anymore. Use linux >= 2.6 (optionally with hotplug) and mdev instead! @@ -337,7 +332,6 @@ config BUSYBOX_CONFIG_DEVMEM config BUSYBOX_CONFIG_FBSPLASH bool "fbsplash (26 kb)" default BUSYBOX_DEFAULT_FBSPLASH - select BUSYBOX_CONFIG_PLATFORM_LINUX help Shows splash image and progress bar on framebuffer device. Can be used during boot phase of an embedded device. @@ -383,7 +377,6 @@ config BUSYBOX_CONFIG_FLASHCP config BUSYBOX_CONFIG_HDPARM bool "hdparm (25 kb)" default BUSYBOX_DEFAULT_HDPARM - select BUSYBOX_CONFIG_PLATFORM_LINUX help Get/Set hard drive parameters. Primarily intended for ATA drives. @@ -445,35 +438,30 @@ config BUSYBOX_CONFIG_HEXEDIT config BUSYBOX_CONFIG_I2CGET bool "i2cget (5.5 kb)" default BUSYBOX_DEFAULT_I2CGET - select BUSYBOX_CONFIG_PLATFORM_LINUX help Read from I2C/SMBus chip registers. config BUSYBOX_CONFIG_I2CSET bool "i2cset (6.7 kb)" default BUSYBOX_DEFAULT_I2CSET - select BUSYBOX_CONFIG_PLATFORM_LINUX help Set I2C registers. config BUSYBOX_CONFIG_I2CDUMP bool "i2cdump (7.1 kb)" default BUSYBOX_DEFAULT_I2CDUMP - select BUSYBOX_CONFIG_PLATFORM_LINUX help Examine I2C registers. config BUSYBOX_CONFIG_I2CDETECT bool "i2cdetect (7.1 kb)" default BUSYBOX_DEFAULT_I2CDETECT - select BUSYBOX_CONFIG_PLATFORM_LINUX help Detect I2C chips. config BUSYBOX_CONFIG_I2CTRANSFER bool "i2ctransfer (4.0 kb)" default BUSYBOX_DEFAULT_I2CTRANSFER - select BUSYBOX_CONFIG_PLATFORM_LINUX help Send user-defined I2C messages in one transfer. @@ -587,7 +575,6 @@ config BUSYBOX_CONFIG_LOCK config BUSYBOX_CONFIG_LSSCSI bool "lsscsi (2.5 kb)" default BUSYBOX_DEFAULT_LSSCSI - #select PLATFORM_LINUX help lsscsi is a utility for displaying information about SCSI buses in the system and devices connected to them. @@ -634,6 +621,13 @@ config BUSYBOX_CONFIG_MICROCOM default BUSYBOX_DEFAULT_MICROCOM help The poor man's minicom utility for chatting with serial port devices. +config BUSYBOX_CONFIG_MIM + bool "mim (0.5 kb)" + default BUSYBOX_DEFAULT_MIM + depends on BUSYBOX_CONFIG_FEATURE_SH_EMBEDDED_SCRIPTS + help + Run a script from a Makefile-like specification file. + Unlike 'make' dependencies aren't supported. config BUSYBOX_CONFIG_MT bool "mt (2.5 kb)" default BUSYBOX_DEFAULT_MT @@ -644,26 +638,22 @@ config BUSYBOX_CONFIG_MT config BUSYBOX_CONFIG_NANDWRITE bool "nandwrite (4.8 kb)" default BUSYBOX_DEFAULT_NANDWRITE - select BUSYBOX_CONFIG_PLATFORM_LINUX help Write to the specified MTD device, with bad blocks awareness config BUSYBOX_CONFIG_NANDDUMP bool "nanddump (5.2 kb)" default BUSYBOX_DEFAULT_NANDDUMP - select BUSYBOX_CONFIG_PLATFORM_LINUX help Dump the content of raw NAND chip config BUSYBOX_CONFIG_PARTPROBE bool "partprobe (3.5 kb)" default BUSYBOX_DEFAULT_PARTPROBE - select BUSYBOX_CONFIG_PLATFORM_LINUX help Ask kernel to rescan partition table. config BUSYBOX_CONFIG_RAIDAUTORUN bool "raidautorun (1.3 kb)" default BUSYBOX_DEFAULT_RAIDAUTORUN - select BUSYBOX_CONFIG_PLATFORM_LINUX help raidautorun tells the kernel md driver to search and start RAID arrays. @@ -671,7 +661,6 @@ config BUSYBOX_CONFIG_READAHEAD bool "readahead (1.5 kb)" default BUSYBOX_DEFAULT_READAHEAD depends on BUSYBOX_CONFIG_LFS - select BUSYBOX_CONFIG_PLATFORM_LINUX help Preload the files listed on the command line into RAM cache so that subsequent reads on these files will not block on disk I/O. @@ -687,7 +676,6 @@ config BUSYBOX_CONFIG_READAHEAD config BUSYBOX_CONFIG_RFKILL bool "rfkill (4.4 kb)" default BUSYBOX_DEFAULT_RFKILL # doesn't build on Ubuntu 9.04 - select BUSYBOX_CONFIG_PLATFORM_LINUX help Enable/disable wireless devices. @@ -708,7 +696,6 @@ config BUSYBOX_CONFIG_RUNLEVEL config BUSYBOX_CONFIG_RX bool "rx (2.9 kb)" default BUSYBOX_DEFAULT_RX - select BUSYBOX_CONFIG_PLATFORM_LINUX help Receive files using the Xmodem protocol. config BUSYBOX_CONFIG_SETFATTR @@ -719,7 +706,6 @@ config BUSYBOX_CONFIG_SETFATTR config BUSYBOX_CONFIG_SETSERIAL bool "setserial (6.9 kb)" default BUSYBOX_DEFAULT_SETSERIAL - select BUSYBOX_CONFIG_PLATFORM_LINUX help Retrieve or set Linux serial port. config BUSYBOX_CONFIG_STRINGS @@ -749,48 +735,41 @@ config BUSYBOX_CONFIG_TTYSIZE config BUSYBOX_CONFIG_UBIATTACH bool "ubiattach (4.2 kb)" default BUSYBOX_DEFAULT_UBIATTACH - select BUSYBOX_CONFIG_PLATFORM_LINUX help Attach MTD device to an UBI device. config BUSYBOX_CONFIG_UBIDETACH bool "ubidetach (4.1 kb)" default BUSYBOX_DEFAULT_UBIDETACH - select BUSYBOX_CONFIG_PLATFORM_LINUX help Detach MTD device from an UBI device. config BUSYBOX_CONFIG_UBIMKVOL bool "ubimkvol (5.3 kb)" default BUSYBOX_DEFAULT_UBIMKVOL - select BUSYBOX_CONFIG_PLATFORM_LINUX help Create a UBI volume. config BUSYBOX_CONFIG_UBIRMVOL bool "ubirmvol (4.9 kb)" default BUSYBOX_DEFAULT_UBIRMVOL - select BUSYBOX_CONFIG_PLATFORM_LINUX help Delete a UBI volume. config BUSYBOX_CONFIG_UBIRSVOL bool "ubirsvol (4.2 kb)" default BUSYBOX_DEFAULT_UBIRSVOL - select BUSYBOX_CONFIG_PLATFORM_LINUX help Resize a UBI volume. config BUSYBOX_CONFIG_UBIUPDATEVOL bool "ubiupdatevol (5.2 kb)" default BUSYBOX_DEFAULT_UBIUPDATEVOL - select BUSYBOX_CONFIG_PLATFORM_LINUX help Update a UBI volume. config BUSYBOX_CONFIG_UBIRENAME bool "ubirename (2.4 kb)" default BUSYBOX_DEFAULT_UBIRENAME - select BUSYBOX_CONFIG_PLATFORM_LINUX help Utility to rename UBI volumes config BUSYBOX_CONFIG_VOLNAME @@ -801,7 +780,6 @@ config BUSYBOX_CONFIG_VOLNAME config BUSYBOX_CONFIG_WATCHDOG bool "watchdog (5.3 kb)" default BUSYBOX_DEFAULT_WATCHDOG - select BUSYBOX_CONFIG_PLATFORM_LINUX help The watchdog utility is used with hardware or software watchdog device drivers. It opens the specified watchdog device special file |